53.Chinese diesel heater Motherboard replacement.

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ธ.ค. 2024

ความคิดเห็น • 19

  • @DEVONLAD11
    @DEVONLAD11 10 หลายเดือนก่อน +2

    I have the black board on my 2019 diesel heater. The newer blue boards work completely different to the older boards. There's no altitude adjustment plus you cant disable the pass code also the startup fan and pump control runs different and there's no startup retry ect. The blue board is a cheaper version of the old black one plus you cant use veg oil or waste motor oil with the blue board.

    • @simplyboating4609
      @simplyboating4609  10 หลายเดือนก่อน

      Hi,
      I didn't know about the blue board. I know that black ones are sometimes different and are not compatible with the controller that's why its better to replace them both at the same time and try to get a generic one. .

  • @crowndroyalty2527
    @crowndroyalty2527 10 วันที่ผ่านมา

    On your old one, 2 plugs has THREE PRONGS and on the new one it has one TWO PRONG… did the three prong plug into the two prong ok??? I’m not understanding what happened with that

  • @thebaldyhippy
    @thebaldyhippy ปีที่แล้ว +5

    Great video

  • @jaimoallen8441
    @jaimoallen8441 10 หลายเดือนก่อน +1

    Hi have you got a link for the motherboard and controller please

    • @simplyboating4609
      @simplyboating4609  10 หลายเดือนก่อน

      Oniissy Car Heating Control Board, Car Air Diesel Heater 3KW 5KW 12-24V Motherboard W/LCD Switch Remote Controller amzn.eu/d/f9zDvCu
      amzn.eu/d/f9zDvCu
      Hope this helps if not just ask.

  • @GD90341
    @GD90341 11 หลายเดือนก่อน +1

    On the pcb there is an hall sensor, on the new there is no one to see, how does it regulate?

    • @simplyboating4609
      @simplyboating4609  11 หลายเดือนก่อน +1

      I not that technical sorry, all i can say is it works fine.

  • @Louis-wr9ft
    @Louis-wr9ft ปีที่แล้ว +1

    thank you

  • @Den-ml7zg
    @Den-ml7zg ปีที่แล้ว +1

    Thanks for the vid, i tried it but get error 06, fan Just takes off

    • @simplyboating4609
      @simplyboating4609  ปีที่แล้ว +2

      It sounds like the fan is not spinning freely. Have a look at my vlog 55 at 4.35mins in and I explain about E006 If you still can't fix it let me know.

    • @simplyboating4609
      @simplyboating4609  ปีที่แล้ว +2

      th-cam.com/video/GbFpD1IOE3o/w-d-xo.html

    • @Den-ml7zg
      @Den-ml7zg ปีที่แล้ว +2

      Thanks for the reply, I could not get it to work. When I hit the power button the fan spins up fine it just keeps increasing rpm until the unit shuts itself off giving code 06. After further research it appears I need the black board with the controller I have. Anyway I found the black board and controller combo on Amazon. Hopefully this will fix my problem.

    • @simplyboating4609
      @simplyboating4609  ปีที่แล้ว +5

      @@Den-ml7zg It is best to just buy the set so you know its compatible. You will get controller, remote and board for about £35

  • @Jen-fy3pj
    @Jen-fy3pj ปีที่แล้ว +1

    Simple if you no how.

  • @capnchip
    @capnchip 17 ชั่วโมงที่ผ่านมา

    IF you are going to continue posting on TH-cam...GET a stable camera. All that jerking around and doing with one hand is TOTALLY detrimental to information, understanding, professionalism, belief, and interest in watching!