HexiBox v.3 featuring Lotmaxx SC-10
ฝัง
- เผยแพร่เมื่อ 28 เม.ย. 2024
- Introducing the dual driver version of the popular 3" Tang Band "HexiBox" design and a look a the SC-10 from Lotmaxx.
HexiBox v.3 Design on Thingiverse: www.thingiverse.com/thing:443...
3" Tang Band Drivers: www.parts-express.com/tang-ba...
Homepage: hexibase.com/
Facebook: / hexibase
Instagram: / hexibase
Printables: www.printables.com/social/264...
Thingiverse: thingiverse.com/hexibase
SoundCloud: / hexibase
Patreon: / hexibase
Amazon Storefront: www.amazon.com/shop/hexibase - วิทยาศาสตร์และเทคโนโลยี
![[LIVE] BABYMONSTER(베이비몬스터) - SHEESH | 두시탈출 컬투쇼](http://i.ytimg.com/vi/6q-_9s6a_1g/mqdefault.jpg)
Imagine hopping in this guys car, asking about his sound system and he says he has dual 3 inch subs lmao
I’m running an American bass vfl 8 inch sub, makes my roof flex on my car lol . I love small subs
i have a single 4" sub, and i love it.
@@Biowolf626 savage
Then, after the funny look they give you, turning them all the way up and blowing his mind.
And those mini drivers are as expensive as 8 inch sub
How he manages to increase bass on these mini speakers blows my mind
How does Pete do it? I believe its two things, 'Education' and 'Acoustics'.
@@juststuff5216 :facepalm:
Impedance matching. These drivers are so small, the more you can port load the driver, the more it can achieve. 6th orders, T-lines are very capable, I'd like to see what a horn in this form factor could achieve, though I imagine it'd be a nightmare to fit into the build plane of a 3D printer. Folds galore.
Its Science, Yo!
If only he was a bit educated in gym, he could worked that weight off.
In addition to great audio and 3D printing content, the videography, editing and audio quality of this video is fantastic. The transitions from video to rendering/animation, beautiful. I couldn't help but to comment, your production quality exceeds that of most channels with 10x more subscribers. Thank you for the craftsmanship, greatly appreciated.
This is by far one of the best TH-cam channels I have ever experienced, and I've been using this platform for over a decade now. You're incredibly honest, precise, transparent, and efficient! It's so rare to hear someone speak so humbly on here, this channel is a much needed refreshment 🏝 thank you for all that you do, I appreciate you! cheers 🎆🎇
Wow, I love how much bass both setups play, and especially how clean the sound is! But I love more bass so second I loved the second setup more.
This seems to be the best solution that I can stick one underneath the front passenger seat. Thanks for your amazing content! Cheers
Audio channel: zreviews 3d printing channel: cnc kitchen have fun.
CNC Kitchen is great. But not much content lately
Z reviews is one of the most entertaining audio reviewers out there.
Zreviews cringe shill
@@HexiBase Definitely more of a rant type of guy than a review channel tho. I'd say you gotta really try to understand what he likes to get more than a recommendation from him. Gotta say tho - he has a large influence over the audiophile community, especially the newbies.
I bought Sennheiser HD660s all because of his review and they fucking RULE!
Brother this videos blow my mind every time. I have learned few tricks here and there and I enjoy making my own boxes and stuff but the patience and science you display along with the precision and care are Fantastic. Thanks for sharing this awesome knowledge with the world.
I've just came across your channel browsing through car audio videos.
You, sir, are an amazing presenter, very pleasant to listen to.
Keep it up!
3d printing: definitely check out "make anything", cnc kitchen
audio: i only know you hexibase :)
Your scientific approach, integration of new ideas and technology, and willingness to try something just for proof of concept are all awesome. I enjoyed your audio vids before you integrated 3d printing... both of which are hobbies of mine as well. Keep em coming. I suppose I've got to build Hexibase V3 for my kids car now...
Dude. I totally admire you. Been watching your vids for a small while now... (think I stumbled upon you via some other bass channel). You positively have a music theory degree, as well as a degree in electronics engineering. I'm a prior Navy radar tech, so that helps with understanding the theories you are presenting. I'm also a bass enthusiast, as well as a moonlighting EDM producer, car nut, general nerd. Mad props to you man. Keep 'em coming.
Loving these type of videos on TH-cam. Properly engineered and tested products. Subscribed.
Amazing performance! Perfect example of proper enclosure design.
Watched a few of your videos today, im very impressed, love the detailed information you give.
Yes! I have been waiting for the next video, so excited to watch it!
Nice job man. Crazy result!
brought back some "what's in my trunk" vibes
1st class production and editing.
These videos are really unique and interesting because they 1) demonstrate how 3d printing can be an enabling tool in the advancement of other hobbies and knowledge domains and 2) because Hexibase is capable and intelligent, but not a dedicated 3d printing expert. This gives a really interesting look into what is practically achievable for a hobbyist that wants to use a printer as a tool, and does not want to invest a ton of time into becoming a 3d printing specialist. For years now, almost every commercial printer has been capable of producing excellent parts in the hands of an expert or specialist, so the evaluation criteria needs to shift to what it is capable of producing in the hands of a competent generalist.
lower end sounds great on the v3, wicked test tracks too!
So I went ahead and got me a printer after watching your v.2 build. It was my first print ever so there was a lot of trial and error. I got it done and opted for an internal bluetooth circuit amp and power supply input as the only externally visible connection (Pics on thingiverse). This is doable, thanks to you Sir! Just finished v.3 for my desktop setup the other day. Got a Dayton Audio DTA-2.1BT2 100W 2.1 for a dedicated sub channel and 2 satellites laying around AND THE SOUND IS AWESOME!!!! The dual subs don't even break a sweat, so I'm working on a remix now to take advantage of my 310x310 build volume. Will post on HexiBase Thingiverse remix page once complete with specs.
Wow, what great production quality. Awesome video.
I love these videos. So interesting and satisfying to watch.
These are freaking awesome. I would love to have one scaled and configured for a 8”.
Godly transitions man 🤯.
I can’t wait to see what you print next! Big fan!!
this is simply amazing. you are amazing! astonishing work.
I had one of these woofers, but no 3d printer. I wanted to give this design a try, so used just one woofer and built it off 1/2 inch MDF. Of course I wasn’t able to make the curves like hexibase.
But the design delivers. It fills my 2 car garage with ample bass. 👍 to hexibase.
I love Tang Band. Listening to this video on my desktop with a Voxel mini-sub, and I've built Paul Carmody's Isetta as well.
Amazing how good and powerfull this smal sub sounds! Impressive!
Awesome work and great video!
I remember watching your videos like 10 years ago. You used to build spl stuff then seems like gradually shifted to sq. Cool stuff, I really get into the details you explain, specially when designing a ported box. Always seem so thorough and so knowledgeable in this stuff just wondered if you do it as a profession or if it’s just a hobby.
You designs are incredibly impressive. Your little 3" sub builds get my 15" sub in my living room moving. None of my book shelf speakers nor headphones can reproduce the bass properly. For anyone who is watching, if you don't have a system capable of producing some seriously low frequency bass, you are totally missing out.
An 8 inch box with the same technology and thought would be the ultimate compact sub. Truly amazing my friend 👌🏾👌🏾
Wow... That's really impressive
Awesome video and content in general! 👍 It was recommended because I recently got the Lotmaxx SC-10 and have been watching other people's videos on it.
I believe Dirk is correct about the heat bed wiring being the issue with this printer. I've just ordered some replacement wires to help mitigate any possibility of failure in my printer soon. But so far it's been printing flawlessly!
I've subscribed and am looking forward to watching more of your videos. Great work and take care! ✌️
I built one of these and stuck it under the passenger seat of my 1990 VW Cabriolet.... amazing performance!
Could you also make a video on your education regarding audio? Perhaps what got you started, how and or where you studied, and where someone that’s interested may start? Great work as always! Thanks for the incredible videos.
My super beetle needs a v.3! :O
So tiny, so much base!
Damn bro.... Your work is incredible. 🔥🔥🔥🔥🔥🔥
Your videos ar on another level! Thanks for all the content please keep on :)
As usual: I enjoy watching your videos. Keep making this content!
thanks, mate, amazing editing, also the content, very informative
Awesome build! I had to chop each half into 4 equally sized pieces as there was absolutely no way on earth my printer was going to print a part with that much bed surface area
Nice job,awesome setup
I really appreciate the honest review and opinion on the 3d printer.
Your knowledge and skill is incredible, beautiful filmography and just so enjoyable to watch someone like Discovery Channel should be looking for content like this as I can only imagine your are inspiring many the next amazing engineer. Keep up the great work
outstanding work
I know that you said that this isn't a replacement for a proper subwoofer... But man, it really delivers. For small cars you really don't need anything else just to get that juicy bass boost.
I absolutely love your enthusiasm and depth of knowledge and I'm always left feeling like I cant wait for your next video 😉🤦♂️👌keep up the fantastic work and God bless you 👏👏👏👏👏👏👏🙏
This deserves more views
cool project. was looking for something exactly like this. Going to repeat this project
If you all can imagine how well these two little 3in drivers perform with Pete at the helm of the design wheel then take a moment and try to imagine the series tuned 6th order box that he designed for my Sundown Audio X15d2 and how incredibly violent yet clean it is lol it will blow your hair right back flexing my windshield and yet all the while it sounds absolutely concert clean doing so! AD designs for the win 🔊🔊🔊🏆
What up Junglist! Love your projects and channel. Keep up the good work.
Brilliant work bro... I want that double bass v.3
incredible thanks for your projects!!!
Found some additional channels to recomend.
Audio
- Acoustic Fields
3d printing
- CNC Kitchen
-
Ivan Miranda
Glass bed is definitely a must for best prints.
What an amazing channel you have put together here, your skills [if done alone] are great in the video/audio/electronics department. New sub.
I'm high key thinking of getting these printed. I have a 91 d350 and with a single cab it's hard to get subs in it and this guy sold me on the product so I might be rocking them lol
Starting to hear distortion in my right AirPod lol keep doing these I’ll watch them all
I can be a hobby sound engineer thanks to your videos. Great Content, very informative and academic.
great as usual ,,, this guy really does go down to 11.
True legend 🤘 they ability for you to convey your knowledge is 🔥
You've got a new subscriber. Love your content and I'm so glad I found your channel.
I am going to build this along with his bookshelves he designed for a desktop 2.1 setup! Super excited! I bought a bigger 3D printer just to build these.
Excuse me, how much are we talking about here?
@thujan ha ha.. hold my beer, a core xy is on my way.
WOW...version 3 is pretty amazing....version 2 is no joke either....it is so awesome to me that a 3 inch driver can do that much bass...or in v.3 MORE bass...truly impressive :)
"The HEADPHONE Show" is a great YT ch for audio nerds.
Mind blowing project....
Best channel ! amazing work man
very impressed I like your videos a lot . I love to learn from people like you ! thumbs up
great video as always. love the intro song too
Ivan Miranda, it's 3D printing he does some big prints even as far as making his own large printer!
THIS is what i need to add to my portable box... THX man :)
Rounded corners tend to warp less. An enclosure would also help with your issues. Just some foil faced foam taped together and set over the top does wonders.
U are so super cool! im a huge fan since i saw you yesterday haha :D
I already ordered one of the sound units and preparing to 3D print V2 very soon!
I'm impressed with the sound quality of those mics & that's after TH-cam has done it's 80 cents worth to it.
I am always amused by the writing, editing and producing qualities of your videos, not even mentioning the outstanding mic tech and sound quality! I listened the test and I was, yeah, ok, then "one of the jerks again pumping music god damn" , then I noticed it is coming from my speakrs omfg :D it is sooo deep, I can finally annoy my neighboors too with a car XD
Mococoa!!! Looks fantastic mate
7:05 I see that MPD-218 you've got. I
good user engagement challenge sir kudos
I really enjoy your channel. Been a subscriber for a while but really didn't get hooked until you combined 3D printing with enclosure design. I would love if you could get into the theory and practical design side of things. I've gone through almost every single WinISD youtube tutorial online but I don't think WinISD can support complicated enclosures like the ones you make (T-Line, etc). I'm looking at using a Tang Band W5-2053 and it's other slightly beefier cousin in a small car foot well enclosure. Whatever ported box I design seems to have a steep drop off after 40hz. I'm just a total newbie hobbyist and hope you can do a video on box design! Love the channel, thank you!
I'm pretty impressed! I rebuilt my printer and was looking for some large prints to try. Printed just about perfectly! I did have a bit of problem with the corners lifting, but that's my fault. It goes under my desk, so I'm not too worried! I also had to sand the tongue and groove to get them to fit together. Also my fault and I haven't fixed that yet! Also... Don't use 5 minute epoxy. It takes too long to cover the whole joint! I just barely made it.
I pared it with a pair of the Back Horn sphere speakers with Tang Band W3-1364SA speakers I had laying around. Sound great! I'm powering them with a Fosi Audio BT30D-S with 50+50+100 watts.
This speaker makes a great setup for my desk! You'd never believe this was 4 3" speakers! Sounds so much bigger! I can't believe the sub makes so much bass!!!
Hexibase, you’re amazing! Thank you so much!!!
I immediately subbed once I saw the mococo drink. lol Great work by the way.
This man is a wizard. I don't have a clue to where even start to do something similar... :O
epic, thanks a lot for this.
Just one word - AWESOME! )
That deep base output is amazing. I wonder if it digs deeper than my 10 inch driver in a 20 liter sealed enclosure. Clear difference between v2 and v3.
Do you remember when I suggested some project involving a soundbar with cheap speakers? I have another one: a project involving reference speakers for sound mix. The size could fit on a print bed and speaker could be sourced.
making small big, and big small; is the final tier of engineering gratification.
Design is fantastic...
3D Printing: Teaching Tech
Audio: HexiBase ;)
my mind was blown when you plugged in the first sub, then my mind was even more blown when you connected the second one :O do you know how much grams of filament this used? If i wanted to pay some company to print this for me?
Your an amazing individual 👏
My favorites are Chris Riley for 3d printing and audio williston audio labs for audio Amps. But honestly hexi your by far the best at combining the two!
I like your channel and the car audio fabrication channel and thats about it.
I really like that track “shed” that you use for the demos for some of your previous videos! Anyone else?
As a HexiBase fan, I love your builds, but please Peter, try making your speakers fit in most 3D printers with 220x220 printing base. Thank you!
CAF as a Car audio vet, I still learn things from him.... SMD, for big, big sound that I would love to have