10" Subwoofer Enclosure (featuring Creality CR-10 V2)
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2020
- In this video, we find out how a 3D printed subwoofer enclosure does on the Term-LAB SPL meter, and how the Creality CR-10 V2 stands up to a 300+ hour print.
Creality CR-10 V2: amzn.to/2DyUGB9
Subwoofer Enclosure: www.thingiverse.com/thing:456...
AD2210 D2 (Featured) Subwoofer: adcaraudio.com/store/product/...
AD2210 D4 (Also Compatible) Subwoofer: adcaraudio.com/store/product/...
Homepage: hexibase.com/
Facebook: / hexibase
Instagram: / hexibase
Printables: www.printables.com/social/264...
Thingiverse: thingiverse.com/hexibase
SoundCloud: / hexibase
Patreon: / hexibase
Amazon Storefront: www.amazon.com/shop/hexibase - วิทยาศาสตร์และเทคโนโลยี
this guy is seriously underrated
That depends on how frequently videos are uploaded (quality videos+frequently)
I regularly watch all kinds of things he posts. I think I've watched it all, and he's among 3-4 subscriptions I have made in my entire life. Also, ppl prefer entertainment over science.
@@psionicxxx says the guy with an entire list of channels he is subscribed too lol
@@psionicxxx What Dare said.
Carl Johnson - seems like you’re confusing exposure and algorithms to what the OP actually means. Pete is awesome. I wish that he lived down the street from me. I’d be his friend, I trust his word, I support him on Patreon, and he’s underrated.
That Spl score at that wattage is very very impressive and you did it at the windshield too. Most impressive! I used to compete so I know. I can't believe how loud this is!!
That’s what I’m saying! Definitely didn’t give that sub enough cred
Absolutely beautiful in design and performance
Next up on Hexibase, a 3D printed 8th order bandpass with a 2x isobaric group in push push configuration. 😍 Tuned to peak at seperate peaks and maxing out at 70-75hz, so by 90hz the sub has passed the job to the other speakers.
Never get enough hexi. Long or short video. Either goes good. I usually listen with some skull candy hesh 3's.
HexiBase still making some of the best content in my feed. Great production and editing. The video flows well and the content is awesome. I'm loving these printed boxes.
Greetings from Scandinavia and esp. from Finland, an emeritus architect writing. You asked about the lenght of this (longer than usual) video. For me it was perfect. Your other videos are usual in my opinion too short with your poitively short/exact but also rather fast english thinking about your naturally growing global audience. You said podcasts, I feel strongly I ’drown in podcasts’ today so instead of going there - just perfect your already excellent videos, please.
You often finish your shorter videos about an audial situation very suddenly. I have been listening intensively, for example about the problem of youtube audio quality. And I am towards the end even more intensively waiting for your personal point of view and advises about what we can do to create/invent our own solutions. Usually you keep this to yourself - and naturally I respect your reasons.
Extra professional bonus you have given us out here: your exact 3D experiments have revolutionized our small architects office in producing complicated architectural miniature modells. My favourite ones - made after your own 3D projects - are created by skilful womens, by my wife and daughter studing the exact acoustics (and visual aesthetics) of interiors for music rooms, chapels, studios and - and finally private homes with a grand piano in the center (a home can be an acoustic problem but it that can be solved with knowledge).
It's been too long since he's put out a new video. This guy is beyond amazing. Exception knowledge base as well as practical realistic testing and samples to show the application of the principles he gives us. We want more Hexibase!
iv been building mdf and birch subwoofer enclosures for awhile now and this is truly amazing.
Ridiculously thorough...I just blew threw half a dozen of your videos and was amazed with the content and presentation. I’ve been researching the Creality CR-10 and I think your comments have me sold. Keep up the great work, I have subbed and am looking forward to more great info plus projects once I get my printer. Thank you.
It's a pleasure to watch someone with this much clue doing hobby DIY design
I just love the flow in your vids. Not a sigle intend to skip a single second!
You are most definitely my go to Audio TH-camr. I am planning on putting a complete diy audio system in my 2010 Audi A4 and you are helping me a massive amounts with knowledge on designing my enclosure. I have been installing "Plug and Play" Sound systems in friends cars for years now but this is my first all me enclosure. Keep on doing what you are doing, you are amazing my guy!
TH-cam’s how it’s made. Underrated asf and is funny as well as teaching people stuff too
I absolutely love your videos! In concept you talk about numbers, volumes and aren’t just saying “I have the most bass on TH-cam!”...you created and narrated the perfect balance of science with fun!
Love how the b roll of the fully assembled sub and enclosure look like a perfect 3D model
Hexi is world class at what he does. And I am intrigued even though I don’t know half of his knowledge or technical jargon.
Love this presentation style man! Very 'episodic' and fully featured to watch in nature, great stuff - keep bumpin'
This is the second video I've watched START to FINISH and I'm very impressed with your quality, detail, craftsmanship, and your overall audiophile.
I would like to suggest when making two halves try incorporating a dowel pin to help with rigidity and finding centering.
Great content and thanks for the video!
You are a crazy man and I'm a fan!. The amount of time you must have spent to make this video with the b-roll, 3d graphics, voiceover....everything is impeccable. On top of that, that build is just awesome!
Your videos were part of the reason i wanted to get a 3D printer , love Audio In general and that was my plan to work with this, mine should arrive next week cant wait to print an do some testing my self
keep the amazing job
Yep - I have a Creality-CR10S (identical build volume yours has), with the BLTouch, and love it. You are absolutely correct we struggle for large volume print needs. I love your work, and thanks for sharing. Sounds great (via an iPad, by way of Bluetooth to Bose QC35 headset)!
I love these videos. I was into 3d printing and electronics and loved music. Stumbled across your 3.5" 3d printed enclosure video and it's definitely taken me down a new hobby path with speakers after completing a set. Thank you for your knowledge and time spent on these cool projects.
It would be cool to have a build series of videos for a 2.1 3D printed desk set up.
2.1 systems. They receive so little love nowadays, but they are awesome!
I made clouds buster sword with bluetooth board, not gonna lie kinda sucks, then redesigned it, put down firing sub and made the meteor hold my lepai plate amp, it is really great, looks cool asf too
Your test track got my home engineered and built Crossfire BMF 12 based subwoofer moving in my home stereo. It is in a very rigid sealed enclosure with a few hundred watts of class ab amplification and a 6 DB bass boost at 35 Hz. :)
Those "what's in trunk video's" were great! I do however, like these 3D printed enclosure videos. Every year I hold out on experimenting with 3d printing, the tech gets better. Great video, Pete!
I usually listen to your videos in my car.
All three subs are in a custom made infinite baffle in my BMW. Here's the setup--
- Audio Dynamics DSP68
- 2 Dayton Audio AMT Tweeters up front (4kHz-20kHz)
- 4 Dayton Audio 4 inch Reference Full Range drivers (250Hz-4kHz)
- 2 Audio Dynamics 1100 Series 8" subwoofers (60Hz-250Hz)
- 1 Audio Dynamics 1100 10" subwoofer (20Hz-60Hz)
My setup never disappoints, just like your videos. Keep them coming!
Wow that's a sweet setup
That woofer can certainly handle atleast twice that power level and still not even break a sweat soooo definitely room to grow and raise that termlab score!
The editing is fantastic, smooth transition between video and rendered views, seamless between background music and the bass demo... amazing. Listening via my Amazon Echo buds. My next car audio purchase will be a bank of supercaps to stiffen my voltage.
Outstanding build, I have a 3D printer but never same any thought to print a case for a sub, thank you for the ideas.
Man your video quality of your total production is sooooooo good, not to mention your indepth knowledge. Really enjoying your content. Keep it coming
I'm a long time audio nerd that's just bought a CR10s Pro V2. I think what you've created is awesome. Whether or not the layers separate with the continuous low frequencies over time is to be determined. Great job though. You never know until you have a go.
Been watching your videos off and on for years...glad to see you're still going
I had a debate with a long time friend of mine a few months back on the efficacy of large 3D printed enclosures, and have been sending your videos as a sort of "proof of concept" with the smaller enclosures. This video alone proves that 3D printing (as slow as it is) is a valid way of creating enclosures. I do appreciate that you went for a more standard design, as with your ability to model (and print) basically any enclosure style, you could've gone for something absolutely insane, 94738924773rd order, invisible bracing with a low shelf of -60hz haha.
I do agree with some of the comments stating that some internal bracing could've been used to help with the resonance, but if you say it's fine, I'll damn well believe it haha.
I won't even mention the crappy cabinet my Dayton speakers are sat in, but I am using an old pair of AKG K702 headphones to listen; they do the job just fine :)
Looking forward to your future endeavours as always!
Loved the narration, the cut from inside the 3d enclosure, editing and information. This should be part of college "how to make technical and entertaining videos".
That print is incredibly brave.... Stunning finish on that print. Well done
Wow dude the transition from you talking about the sub to the 3d animation of your design.. Bravo
That SPL test shook my whole house from my Infinity RS4v1s. As a car audio/hifi guy, I need to get those tests!
Great job Pete loved the demonstration of the 3d printer and the enclosure you built my head phones I listened to are from jbl there wireless ear pods and costed me about $100 on sale so the reproduction of sound in my ear was phenomenal!!!
Love the long form presentation, combining product review and build. I listened to you on my Shure 215 IEMs plugged to EarSrudio Bluetooth adapter. nothing fancy..
140db out of that????? THAT'S INSANE! Nice work! I listen to your videos on my 60" LED with two Cerwin Vega LS-15's powered by a Yamaha RX-V657. I hear it all! Love the 15 min vids, you pack so much info into them that they really fly by. Thanks, Pete!
He does it again folks! So glad there are people willing to experiment with 3d printed speaker enclosures. I listened to this with my Sennheizer HD598 SE headphones powered by a Behringer Q802USB mixer. My next hobby project will be with audio exciters. Attach a single audio exciter to the back of an extruded polyeurethane foam panel and it creates a beautiful realistic audio presence. Gonna use the dual-3" subwoofer enclosure you created to handle the low end. The longer format of these videos are great! Tons of good information with lots of personal experience sprinkled in. Keep it up dude! ^_^
I was listening on my home build, smacked together system which consists of Two Jamo Compact 90s with some newly installed tweeters (JBL) and bass drivers (Cervinwega) and extended bass ports made out of plumbing tubes. MTX Black Gold 12 subwoofer the one with plexiglas. The speakers runs on a Pioneer SX-337 with no subwoofer output so i drive the subwoofer using a zone mixer and a car amp (600wrms). Great video!
Great videos! The small enclosures you’ve made motivated me to make my own “band pass” enclosure out of an old 6.5” sub and a wine box. After some tweaking it sounds surprisingly good, louder than I thought it would be. I’m no audio engineer, just been messing with this stuff for years and learning through making, your videos help kind of fine tune my general knowledge. Thanks!
Ok furry
@@GeneralKenobi69420 very clever, did it take you an entire year to come up with that one?
@@FabriDragon Still less than the time you've spent in your mom's basement
@@GeneralKenobi69420 another banger 😂🖕
Oh my oh my, I'm listening to this with my Klipsch Promedia 2.1 on my Pc. I felt that.
The presentation style is great! You managed to convey all the information any normal person would want to know about a 3d printed sub box and the featured creality printer. Also i'm using Audio Technica ATH-M40X's (i think they're pretty great).
Seriously underrated channel.
I really enjoy watching this guys videos, especially these 3d printed speaker ones they're awesome.
Pete, Come back bro! I managed to print one half of this box in 3 days with the CR-10v2... I got into all of this because of you bud! Don't be a stranger! And thank you for your content!
RESPECT!! You sir, should be paid for your efforts, however, the high class of your productions should also be available to the masses as an example of what we should all expect from videos. I will be making an effort to fund your adventures.
Love the video, was recently looking in to building some 6.5" speaker enclosures for my garage and I think this video solidified that's the next project. I'm listening on a set of Bose Sound Sport in-ear.
I need more videos from you sir. You are the mad scientist of audio.
Wow that sound is very clean
Damn, YOU are a skilled lad!
Your cinematography and editing skills are next-level!
Bush hifi
I enjoy your channel a lot. Have been building subs many years ago. Still have a Rockford Fosgate PWR412 living in my darkroom. Not sure if I want to print a 35l enclosure, but your channel motivated me to renovate this speaker. Looking forward to your next builds!
Pleeeeeease bring back all the old videos? You were my favourite channel. While I love the new content, there is so much good stuff missing!
Hexi, your videos are top notch professional quality. Please continue, and I wish you much success
Awesome work, you never fail to amaze the viewers!
Bro you have touched on my favorite thing and my newest thing also. I have loved and had subs for 20plus years and just bought my first 3D printer. I will be going back to your other videos and trying that 3.5 inch build for my motorcycle.
JVC XX headphones, sounds excellent, outstanding sound and presentation as always. Now get back to work!
Audio-GD NFB-28 (2016) - Ether Cx with velour pads -- I *felt* the lows. Well played, sir.
Fantastic editing and presentation to go alongside the awesome content - great job!
Just discovered your videos today. Ur content & style are bang on. Keep it coming 😎 thanks
Wow u do listen to the fans, i asked for this in the past couple videos along with some other guys and u did it :D
It sounds just as clean as it looks 👌
I love your videos. Very easy to watch and love how you test all the end results.
I don’t comment usually but definitely appreciate the detail you put into these videos.
I am beyond grateful, excited, and impressed with yet another next level 3D print project! I’ve printed 4 of the Dayton 6.5 subwoofer 🔊 builds!
Will go buy one of these subs right now before they go out of stock!
HexiBase I remember when the tangbang mini sub went out of stock on parts express for 60 days!
I've got some in stock if you need them, but I'd prefer a chance to play with the 3100 series
HexiBase I was thinking about purchasing another sub and amp right now and found this on the website:
AD2210 D4
$229.00
On Back Order - Estimated arrival is September 7th.
I’m glad I got at least one before they went out of stock. I knew they would! So awesome! Good Job, HexiBase!
Your camera moves are out of this world! GG
I always enjoyed your detailed video. It's the only 3D printer review video I watched because you only make basic stress tests speaker box and not crazy sculpted pieces that usually serve no purpose other than looking beautiful.
I watched your vids with my setup here:
Sony SS-D201 pair
Altec Lansing ATP3 Subwoofer (bypassed direct wire to speaker cone)
Aiyima A03 2.1 amp to power everything
Behringer UMC-22 Audio Interface as DAC
Listened to the video with my Jamo S803's and a self built 15" sub tuned to 18hz. This ten hits pretty deep! Makes me want to do a custom build for my car.
Top shelf as always, man! And for a single 10, that system you put together there is unbelievable. I've heard dual 18s that weren't that tight down low. Classy driver and solid cabinet. I listen with a repurposed Sony home theater receiver serving as a TOSLINK DAC, driving a pair of 20-year-old Sony MDR-V600s. (I know, I know, but I'm USED to them....) When I'm not trying to listen to subwoofers over TH-cam compression, I've got a pair of Dayton B652 bookshelf speakers driven by that same receiver. For being an extreme budget setup (the receiver was free!), I'm happy with the result.
Nicely done as always :D i'm daily driving your 6 1/2" enclosure because of weight... it's nice and light also the output of the enclosure really surprised me.
I was listening on 2x Fostex Fe206En with backloaded horns + Alpine SWR1542 in sealed encloure ;)
Very cool build. Wouldnt have thought 3d printing a sub box would be here so soon. That box looks dope asf.
Oh I was listening to it on a 2i2 and Sony cd900st
Seemed like it played well below the tuning of enclosure. Listened to it on my shop setup with a 10 boston g3 in 2:1 4th order. Although i have my parametric adding +5db @ 26hz i could still tell the bass extension dug deep in your 3d printed box. Excellent work bro.
I adore the design on that
MDR-XB950N1 with ExtraBass actually tuned down a little in the Sony Headphone app. Like others, I am happy consuming your content long or short form and love seeing how you are dovetailing your love (and job) in audio systems design with 3d printing. I see a CR-10v2 in my future...
I need to meter my two 12s. A 139 is impressive for what that is. Really shows what a proper enclosure can do.
Listening on B&W P7s through a Behringer QX1002USB
awesome video love your work keep it up.
dude i completely forgot i was watching a video about a 3D printed subwoofer and found myself amazed before you introduced the driver.
the production level.... damn!
This is awesome! Looking forward to printing and testing this setup! I am listening on my HIFIMAN HE-4XX
love that sweet sound .
Great edit! Transitions were on point! My request would be content explaining subwoofer design philosophies/ strategies that seem to be trending in today’s car audio industry. Along with how they translate over to T/S parameters. Then your input on the design strategies. I can also see an upload with you giving guidance to people who are unaware or newly interested in knowing some of the key determining factors that need to be considered/ chosen before deciding/compromising on the enclosure type that is best suited for their desired outcome. Cheers🍺🍺
139dB is awesome for the sub/car/enclosure/amp combination.
Great info as always, science wins everytime. So good..... love the vids.
I can't get enough of your content.
I would like to learn how to design and buying a 3d printer
this better be back in my recommended in 5 years
sounds really clean, keep up the projects!
Love the details that you give and the audio details keep it up please
huge props Pete! this is stellar man!
Listened on Bose QC II. Bass came out clear except the 47Hz test. Sounded like the mic was clipped, but I assume that's the audio codec. Thank you for the excellent review and demo.
I can’t wait for the day you decide to venture into a MEH! Your videos are always informative and a treat.... Maybe one day a print bed will be big enough to print a front loaded or tapped horn!
Pete, I really enjoy your videos. I’m an audio files and technologist, so this channel awesome. I mostly watch TH-cam on my home theatre system. And the quality of the audio from your channel is amazing. My setup will reproduce 15Hz-19kHz (my ears are limited to ~25hz - 18kHz) and your audio seems to exercise that entire range. Your builds are amazing, and I’m seriously considering an upgrade for my Grand Cherokee now.... you may have also convinced me to get a 3D printer. I’m looking forward to trying that out.
If you are curious of my setup I watch you videos.
LG 65” E7 OLED
Pioneer SC-87
Polk signature series S60 fronts (bi-amp)
Polk S35 center
B&W DS3 dipole rears
And the best....
HSU VTF-15H MK1 15” sub
Another really great video from you! Ive been really enjoying these 3D printed speaker enclosure videos.
I watched this video on a pair of Beyerdynamic Custom one Pro Plus that I found for cheap online and the video sounded great!
So precise, awesome design very impressive! 👍
Wow. Just wow. 👏 speechless I am. Patience you have! Listened on 20 dollar Sony headphones from Amazon that are 5 years old. Still has good enough overall sound for me, still has good lower end, good enough for me. The track you played now I'm going to play it in my truck, don't think these headphones do the complete lower end justice. I've an enclosure tuned around 18 hz at my head rest, LOL no choice its directly behind my head in the quad cab. Little over 3 cubes for an older Audiopipe TXX-BE(expanded surrounds past screw holes), on roughly 800(An older West Coast Customs 4 channel that has the duplicate function)watts, with big 3 AND 0 guage power and ground with extra battery. everything below 45hz rattles my eyeballs, I don't know what the cabin is actually tuned to. The truck is a 2007 Dodge Ram 1500 quad cab. Windows rolled down halfway down at 60 mph creates a sub frequency "hum" that almost hurts the ears which im sure is the resonant frequency of the truck. I don't have the equipment to tell, lol.
This is the future of car audio💯💯
not yet, a professional enclosure maker can whip this one out in half a day ( in wood )
But it takes time to actually do it in wood. This is it's a machine popping it out. Granted, the pla is probably more expensive than the wood based on how much is used here!
What we need now is an automated toolchain for generating enclosures, something where you can just plug in your speaker specs, car model, and pick from a few designs specific to your use case. That would be the biggest advantage over something more conventional.
@@AndreaFromTokyo this design also doesnt take advantage of the 3d printing at all, you could have a long complicated T line printed and it would weigh a third as much as an MDF box
edit: typo
4:55 amazing transition there keep up the good quality work :))))
Aune T1 dac/amp with russian tube, Sennheiser Amperior headphones, bass was deep and flawless, great job on the capture :)
Man that box sounds superbly good in these high end headphones...
I've learned a lot from your channel and I look forward to more content!