How to Remove & Install a Pre-hung Exterior Door
ฝัง
- เผยแพร่เมื่อ 27 พ.ย. 2024
- How to Remove & Install a Pre-hung Exterior Door. Exterior door installation can appear difficult but if you follow a few important steps and are a little handy, you can do this project yourself.
Removal of the old door, door trim, door jambs and threshold (sill) is not difficult. Understanding how they are installed will make this step much easier and I will show you how to do it.
Installing a new prehung exterior door can be a challenge if you don't understand the need to keep everything square, level and plumb.
In this video I will show you the tips and tricks I use to install a new pre-hung exterior door and the trim around the door for a clean finished project.
This project involved removal & installation of the door with a brick exterior wall. This instructional video will also apply to installations with other types of exterior siding applications including vinyl siding, Hardie siding, cedar shake siding and others.
Whether it is your front door, storage room door, garage entry door or the back door of your home, you will learn the important steps to take to make your exterior door replacement project a success.
#exteriordoor #exteriordoorinstall #prehungexteriordoor
*If this video was a help to you give it a "thumbs up". If you have not already done so, please consider subscribing to this channel.
Disclaimer:
Although I have been following these procedures for many years; I assume no liability for any damage that may occur to any person or property as a result of the information provided in this video. I take necessary precautions (that I am aware of) when working on these projects but that in no way implies or creates any expressed or implied warranty or guarantee of any kind of particular result. Any injury, damage or loss of any kind to anyone or their property or anything related to information in this video is the sole responsibility of the user and not Helping U Online (this video).
i was an ironworker for 27 yrs i could have had that door out of there in 3 minutes and i would have messed that brick all the way up.nice to see that people can work and take a few minutes to do things right
I just had a French door replaced and the threshold was about 2 inches shorter than the old one. The tried to fill it in with mortar AFTER installing the door because there was a big gap between the foundation and brick. I’m so frustrated. He says it’s fine but I don’t agree. It’s my back entry door. I sure wish I had someone like you around. Thanks for the video. It’s taught me a rough lesson. I think they just thought taking advantage of an older woman is ok
SO helpful. Beginning to end, you explained and showed everything so clearly. I appreciate the little tips here and there. Good stuff. Thank you!
Glad it was helpful!
Best fixed and excellent service and
Job
Glad to help
You can work on my house any time. Nice job!
Thanks
Good video so far. Would recommend adjusting that boot on the saw to prevent kickback and keep your head clear for safety. Also, goggles.
Saw that you pointed drill toward you, probably a safer way to do that also.
Really appreciate that you did a dry fit and did double and triple checks on spacing and shimming.
DIY table saw is pretty slick!
You sir just gained a subscrirer!!! Love the fact even aomeone that's never been in construction can understand this.
Thanks and welcome
I like that table saw.
It is handy
Great informational video. Thanks for making good content.
Our pleasure!
Can you come to Iowa? 😂 I have so many repairs. Just watched your abs video, I need that fixed and a door replaced.
My son bought a townhouse in WV, noticed threshold fallen out and jam rotting. Looks like water has got in and has some rot on floor. How can I find someone with your knowledge and talent in his area? Need someone who can address issues that’s discovered. Wish it was a simple door install… thanks. Excellent job and informative video.
Wishing you the best on your project
Really nice job , very helpfull. 😊❤️🔥🦅🦅
Thanks, glad it was helpful!
Unable to buy an outswing door at Home Depot or Lowe's. Outswing door cost a premium and had to be custom ordered even though a standard size of 36" X 80".
VERY WELL DONE
Thanks
Do you have a video of removing a steel frame door on brick home.
I do not
Thanks, Great Tips that will help me straighten my way out of plumb side door. You know(?) the door that I need to replace as soon as I get a nod from the accountant. (I can' t wait to take measurements again and get the current price of a replacement. - I found my way here from the washing machine video (I've got an old Kenmore with odd failure too) -> tractor bucket arm repair. And I enjoyed your dinner call for the girls :) just a few reasons I'm a new subscriber to your channel.
Thanks... and welcome aboard
When is it time to replace a front entry door? Can applying putty between the wall and door frame work?
Awesome video..
Thank you
Nice work. Is $400 estimate fair for just labor. Thanks. Forth Worth, TX.
$400 is pretty high priced for labor. Labor is about 4 hours. $200 seems fair IMO.
@@hilbert551 lowe's charges 1500 to install exterior door
did not see how you put up the door jamb
Wouldn't exposing the three pins make it easy to break in?
That door is made to be an outswing door and they have solid hinge pins in other words you cannot remove them for the very reason you asked about
👍👌
Jam looks rotten on the left side?
It was in rough shape. Good to have the new door installed with easy operation and a good seal
How much did you charge for that?
I did that to help someone.
How much did you charge?
I did that job just to help somebody out
👍👍😊
She ain't going nowhere!
Mang i like your table saw
Thanks 👍