no need to loosen motor mounts. I took the compressor shield clear off, then i spun the compressor belt off. then I loosened the last remaining compressor mount bolt. the compressor lines have two flexible lines attached to them so it can move enough to remove the control arm bolt. Just take care not to stress then ac lines too much to damage the ac system. no need to raise the motor and stress the axles and exhaust system pipes.
![[LIVE] : ONE ลุมพินี 83 วันนี้!! คู่เอก "พันฤทธิ์ vs ซุปเปอร์บอล วันของโอม MBK"](http://i.ytimg.com/vi/1b4pkKHa_Fk/mqdefault.jpg)
I too will need to do this. Great to see what a DIYer needs to do on this side.
I’m about to do this on my focus. Looks like it might be more of a pain than I originally thought. Thanks for the vid
It is. Trust me.
Nice video, maybe it's the angle of view, but the inner track rod looks bent as well
Nice job! Thanks for the content.
gracias, tu video es de mucha ayuda
Hi. Is it possible to replace the aluminum swingarm with a steel one?
no need to loosen motor mounts.
I took the compressor shield clear off, then i spun the compressor belt off. then I loosened the last remaining compressor mount bolt. the compressor lines have two flexible lines attached to them so it can move enough to remove the control arm bolt. Just take care not to stress then ac lines too much to damage the ac system.
no need to raise the motor and stress the axles and exhaust system pipes.
I ended up using a serpentine belt tool to loosen and tighten the front bolt. Total pain in my ass.
Sometimes they can be for sure!