I think one of the problems is that sometimes the cylinder ends up misaligned with the barrel and the firing pin strikes outside the cap surface. Real revolvers have a mechanism to lock the cylinder in the right position, I don't know if there's a feasible solution to do something similar in this case?
There is no problem with the positioning of the rotating magazine, as the toy plastic slugs can be fired normally. The main problem is that the force of the spring is too small. Since the homemade hollow tube ammunition makes the contact area between the gunpowder and the firing pin smaller, a more powerful impact force is needed to increase the probability of firing.
@@Unclephoto I just ordered one of these. I believe I am going to make a copy of all the parts in styrofoam and then cast them in aluminum to make a much stronger version and see what I can make it do. You are an inspiration..
I ordered the gun and have not got it yet it’s been 13 days and they said 3 to 7 days no way to contact them no phone number no update when it’s suppose to be shipped I’m thinking better watch your money it seems to be a scam and asked for my money back but no one texted me back so watch it I’m sure I got scammed
perhaps you should make a part that the cap mounts on to (a little metal piece) so when the cap is struck it rubs against metal piece causing friction activation?
@@paranormaloz2026 it would be impossible to shoot as the gun wouldnt handle the stress and it would blow up in your hand, but in theory it still likely wouldnt work as the hammer lacks power even with modification,
@@MajesticNaan true ok thanks for your reply, I haven't handled the toy myself though I have read the specifications and sizing as opposed to the real one are practically identical I would assume that the "alloy" stated material wouldn't be as strong but I would think at least capable of handling or quite easily modified to take 22lr if not wmr , has anyone here actually tried either shell themselves?
There is no need to upgrade. The police in Kaohsiung City, Taiwan have directly determined that those who have such toys are guilty of illegal gun possession and have arrested the owners.
@@Unclephoto called border services then said it has been siezed due to the fact that it replicated a real firearm and they will be sending me a letter and it will be destroyed 🤣
I think one of the problems is that sometimes the cylinder ends up misaligned with the barrel and the firing pin strikes outside the cap surface. Real revolvers have a mechanism to lock the cylinder in the right position, I don't know if there's a feasible solution to do something similar in this case?
There is no problem with the positioning of the rotating magazine, as the toy plastic slugs can be fired normally. The main problem is that the force of the spring is too small. Since the homemade hollow tube ammunition makes the contact area between the gunpowder and the firing pin smaller, a more powerful impact force is needed to increase the probability of firing.
Another big reason is the ammo cap. The charge of the cap bullet is not evenly distributed, and the charge is also uneven.
@@Unclephoto try blanks, the are free from license in many countries
@@Unclephoto can the barrel handle 22lr rounds continuously?
is the frame and cylinder actually made from a zamak or zink style alloy?
Yes
@@Unclephotohello bro i want this toy but upgrade version and i up + money for u
Yep like some PAK 😊
Where can I get one of those foldable cap guns?
Ali express
So awesome my friend. Your builds are on another level!!
Thanks bro
@@Unclephoto Absolutely!! You are a skilled maker.....
@@Unclephoto I just ordered one of these. I believe I am going to make a copy of all the parts in styrofoam and then cast them in aluminum to make a much stronger version and see what I can make it do. You are an inspiration..
如果去除弹簧撞针并且延长击锤使它直接撞击子弹会不会效果更好。我看到真正的switch gun是这样的。
I want this toy but upgrade version i give money to you more❤
Is it possible to convert it to .22 lr and use it?
Theoretically it's possible, but it's very dangerous
@@Unclephoto Thanks🖤
I would like to see this and what I was thinking also!
Can I shoot 6mm plastic bbs if I fit the bbs in the shell by using a tape to make the size smaller? Or is there any other way?
Please convert 1873 colt single-action army revolver toy
why dont you just get a more powerful spring?
ง่าไงละครับผมราคาเท้าใร
Can i shoot .22 mag with this?!
Don't that！！！
Next !!!! "sky marshal" toy pls....
Will be updated soon
You are very skilled and talented. This is a very interesting channel. Thank you!!! Happy New Year!
Thanks bro😄
นาคาเท้าใรครับผม
อยากทราบราคา
Is the stock firing pin is metal or plastic?
Metal
can you shoot a real 22 mag out of it
??
No，bro it's just a toy.
What about glock toy gun manual spring shell eject ?
Still under development……😂
@@Unclephoto good, hopefully it will happen soon 😁
Thanks
What the name of the pin used to replace the firing pin???
No name, this pin is one I took off another toy gun.
I think it may actually fire a real 22lr. May have it sent with toy like accessories but may actually work. Should someone try?
Everything is possible.
Die sieht so ähnlich aus wie in einem anderen Video nur leider ohne Benachrichtigung !! Auch keine Info wo es bekommen kann!!
Маэсто! Белисимо! Браво! Лайк и подписка!
Thanks bro
How to buy this gun
amazon😂
There is a purchase link in my video introduction
🤯 So freaking cool 😎🤯
Thank bro😃
Good job man !
Thanks bro!
Can you do with m1911 toy gun alloy
Maybe I'll try it in the future
A BB gun shots harder then that SMH
8:59 replace spring, use stronger one.
Ya los e cambiado los muelles,aora necesito lo del cañón y lo de los petardos,gracias
Hola como podemos hablar,me puedes hacer los tubos te los pago gracias
how much sir
There is a purchase link in my video introduction
how to buy sir
There is a purchase link in the video description
how it's toy if it shoots real bullets
it cannot fire real bullets
Tried to follow this. Tore mine up. U don't even show the reassembly
Sorry, because the parts are too small, your hands will block the lens when shooting, so I simplified the installation steps video
What are those pipes made of
Would it support 22 ?
Também gostaria de saber...
I would also like to know...
Onde você comprou ela
Aliexpress.
I ordered the gun and have not got it yet it’s been 13 days and they said 3 to 7 days no way to contact them no phone number no update when it’s suppose to be shipped I’m thinking better watch your money it seems to be a scam and asked for my money back but no one texted me back so watch it I’m sure I got scammed
I guess there may be a transportation problem. If there is no reply from the merchant, you can try to contact aliexpress customer service staff.
Sera que despara projétil de 22?
Comprei uma pra modificar. Precisa inserir um cão.
Veremos ..
No
Faz uma atualização pra bala de 22 meu amigo
@@gigioieminiconseguiu modificar ?
@@gigioieminifuncionó ??
How much harmful to human when they get hit?
like BB gun
In Indonesia they mod it with ramset and it shoot metal ball strong enough to penetrate coconut😅
can you send me video link? my third world is so strict with guns and id like to do some diy
How can I get to your contacts?
email
Ficou muito bom
Thank you, I think it can be better. A stronger spring will increase the probability of successful firing.
Can i purchase pre made parts from you!! 😂...
Sorry, there are no sales plans yet
perhaps you should make a part that the cap mounts on to (a little metal piece) so when the cap is struck it rubs against metal piece causing friction activation?
Your suggestions are very good and I plan to improve and create new structures in my next works.
How easily would it be converted to fire 22wmr? I have heard that it will fire without conversion is that true?
@@paranormaloz2026 it would be impossible to shoot as the gun wouldnt handle the stress and it would blow up in your hand, but in theory it still likely wouldnt work as the hammer lacks power even with modification,
@@MajesticNaan true ok thanks for your reply, I haven't handled the toy myself though I have read the specifications and sizing as opposed to the real one are practically identical I would assume that the "alloy" stated material wouldn't be as strong but I would think at least capable of handling or quite easily modified to take 22lr if not wmr , has anyone here actually tried either shell themselves?
What about changing the barrel to the real deal for $70?
The link no longer works.
Try other shopping websites
New link s.click.aliexpress.com/e/_DdsLfsr
Bahan nya terbuat dari apa.Logam atau plastik@@Unclephoto
こんなの欲しいな
There is no need to upgrade. The police in Kaohsiung City, Taiwan have directly determined that those who have such toys are guilty of illegal gun possession and have arrested the owners.
Taiwan police so funny
To that I say let's make a bunch of grease guns and put them on the streets
Upgrade
Upgrade
Upgrade
Taiwan police are clowns
Atualiza mano
Thanks request nya
I wasted more time watching this than you did making it
Uploading new videos....please...
New video coming next month
@@Unclephotovẫn chưa có thêm video😅😢
Hi
hi
สนใจอยากจะได้สักอันติดต่อได้ที่ไหน
They siezed mine at the canadian border no explanation so dumb
What happened bro.
@@Unclephoto called border services then said it has been siezed due to the fact that it replicated a real firearm and they will be sending me a letter and it will be destroyed 🤣
@@ComplexCashtôi cũng bị giống anh bạn😅😅
Véndeme una echa
Esta también la tengo también quiero q me la ags
Los trozos de hierro las pistolas las tengo las tres,gracias,dime un precio y x donde podemos hablar
Y lo del percutor lo ago yo ,solo los hierros
🤮🤮🤮
R u ok？ bro
The toys used in the video have purchase links in the video description.
s.click.aliexpress.com/e/_DdsLfsr
Change to ramset
Manish Tiwari number Apna Jija