Not hating on the guys, but this is the best video with the best results I’ve seen so far. Well polished (I don’t mean the manicure-though they are also well polished).
Seriously, where have you been all my life I have a crack in my bath tub I had 2- estimates 1- 5000.00 2- 3000.00 I watched this DYI Video And purchased the materials I am DOING THIS ✨
Same material but if your crack is larger this may help, keep me posted on this I would love to know how it turns out, thank you! th-cam.com/video/QX7vxHRj8lg/w-d-xo.html
Thanks for reminding me of this product. I used it some years ago to patch a hole in a shower we found at the share shack at our rural dump. Perfect for our cabin . However, I now have a nearly new tub to repair. Looks easy and won't run on a vertical surface . Didn't realize it was sandable. Good to know. Thanks again
Yes! I am trying this today with a hole in my bathroom sink. I have the pieces that broke off so I'm first going to glue those in THEN I will use the water weld to fill in the cracks and make it smooth. Thank you for the video to inspire me. ❤️
It's definitely hard to wash off your fingers, but trying to use gloves is a total headache. Fingernail polish remover helps get it off your skin. I'm not nuts about having all these chemicals on my skin, but dang this stuff works so well.
Thank you for this helpful video! I was overwhelmed thinking of how to fix this! I'm a bit sensitive to strong odors. Dose this epoxy (and the paint you'll use in the next video) have a strong odor? And if so, does it go away quickly? Thanks again!
Nope, wrap it in plastic wrap and put it back in the tube. Because you've squeezed the tip and mixed it some, it will start to harden if you just shove back in and close the cap.
If it is just rust on the surface, try sprinkling some baking soda on a sliced potato and rubbing that on the rust spots, if the rust has eaten part of the porcelain, you can use this product to fill any dips that may have occurred after you clean it… See if this helps
@@WhatTheFoxSherriFox - One other question about that. Now my tub is I guess older. The entire tub and inner showet wall is smooth, no tiles. Anyway, how can I go about coloring it right? I don't consider this an almond or biscuit color. I'd almost dub it a "light olive" color. Maybe I'm wrong though.
@@Chewbigga have you considered painting it? I just painted one not too long ago now you can give it a smoother finish and step up your sandpaper and use 200 300 400 grit after using 80 grit … Color matching it to spot paint it might be difficult th-cam.com/video/xkA2zpLgmCU/w-d-xo.html
Hi my favourite, I want to relocate my standing shower faucet. How to fill old faucet hole . This maxx shower plastic wall. Not a fiber glass shower walls. Please respond quickly. This shower wall has 3” space from dry wall because it has 2x4 studs to support this shower wall in between drywall and standing shower wall..
I tried this. My reality with this stuff was that it needs to be mixed between your fingers to a uniform color. While doing this it will begin to adhere to the fingers. Once that happens it adheres thicker and faster. I have no idea how she did this with a French manicure. You'll see.
Thank you for this video!! I had no idea this product existed! I hope you can answer this for me. If you have a really long crack in the base of tub (you know where you stand and move around on), will this stand up to a persons weight once fully cured? Right now I've been using Flex Seal Paint and it eventually starts to come up so I have to redo it every 6 months or so. This seems more of a permanent fix but I'm just not sure if weight put on this method will work. Also do you think putting the Flex Seal Paint over it will ensure a greater safe fail for any water or mold getting through to the floorboards? The person who installed this tub didn't do it correctly causing the new tub to crack at pressure points. This is an apartment so I don't want to incur any charges once I leave. Just looking for the best solution to fixing this darn tub.
The lady lotus recommended a good video that may help in your situation for some reason the link didn’t appear public so I am reposting... it’s a great video that may help you th-cam.com/video/6viyWyjWL8E/w-d-xo.html
Thank you for the video! Do you have any suggestions for something that could be sprayed or painted over the patch to match the off-white/ almond/ biscuit tones of older tub inserts?
I am sorry I do not have any suggestions…You can paint the entire bathtub which I will leave a link below… but I am unsure if there is a way to try to color match that… I apologize for not being of more help.. thank you! th-cam.com/video/xkA2zpLgmCU/w-d-xo.html
@@WhatTheFoxSherriFox I just read one of your comments about this issue with hardening - I think the person on Amazon did not knead it completely before applying it. That's the issue. Gonna get this stuff.
@@WhatTheFoxSherriFox Does it require some mesh behind the hole to keep it from sinking into the hole and for support until it hardens or does the stuff support itself while soft without collapsing into the hole (half dollar size hole) from your experience??
@@chrism.4544 no it doesn’t require any mesh it will support itself, if you have a hole that big you may have to apply some let it dry and then apply some more, but it should work…I have patched very large holes where handicap rails came down from and it worked beautifully…. Just be patient with it and keep me posted how it turns out!
Well, I didn't knead it long enough and now 2 days have past and its still tacky. Oh well, hopefully one day it will solidify. Should have watched your video 1st.
If it’s tacky take it out throw that away, you already have a hole in your tub so it’s not going to matter... follow the steps in my video and do it again, knead it until it starts getting a little warm and becomes one color, fill the hole check after 1-2 hours ... keep me posted and let me know how it turns out! 😉
@@WhatTheFoxSherriFox I picked out what I could and replaced it with better smooshed up stuff. It hardened up like it should and just currently letting it ride until I can borrow my friends small sander to finish it off. Thanks for checking back up.
@@mazzola7980 great news!👍 just remember you can always add a little more if for some reason it doesn’t sand smooth just by repeating the steps, I am glad it worked!
Hi. Is it a must to sand it down?
U don’t have to it just won’t be smooth, but it will still patch the hole 👍😉thank you!
Not hating on the guys, but this is the best video with the best results I’ve seen so far. Well polished (I don’t mean the manicure-though they are also well polished).
🤣🤣thank you!
Thanks for posting this. It’s a few years old but still so helpful.
Seriously, where have you been all my life
I have a crack in my bath tub
I had 2- estimates
1- 5000.00
2- 3000.00
I watched this DYI Video
And purchased the materials
I am DOING THIS ✨
Same material but if your crack is larger this may help, keep me posted on this I would love to know how it turns out, thank you!
th-cam.com/video/QX7vxHRj8lg/w-d-xo.html
There's no way you were quoted those prices for a repair.
Thank you so much for this! You gave me the confidence to go ahead and try this on my own. It turned out great and saved me a wad of cash! ❤
Lol 😆 🤣 when you acted like it was hot. You should have seen my face. I enjoyed that prank on us viewers.
🤣🤣
Thanks for reminding me of this product. I used it some years ago to patch a hole in a shower we found at the share shack at our rural dump. Perfect for our cabin .
However, I now have a nearly new tub to repair.
Looks easy and won't run on a vertical surface . Didn't realize it was sandable. Good to know. Thanks again
Thank you and you are welcome!
Very nice video. Thank you
Yes! I am trying this today with a hole in my bathroom sink. I have the pieces that broke off so I'm first going to glue those in THEN I will use the water weld to fill in the cracks and make it smooth.
Thank you for the video to inspire me. ❤️
If your sink is made of porcelain just make sure and use the correct JB Weld...keep me posted on your project! Thank you!
Thank you for such a great instructional video. I have to repair mine now.
You are welcome, thank you!
Awesome video... definitely answered my question.
This helped, thanks!
Subscribed! Wow, that looks pretty easy. I thought our tub was a gonner! Thank you!
Great video, I got this exact epoxy putty at home depot on a reccomendation, looking forward to using it.
It works great… Keep us posted on how it turns out
Saved me money! Thank you!
You are very welcome, I am so glad it helped and thank you for watching!
great dramatic music
Great video. Seems easier than I thought. Good job Sherri.
Thank you! If you have a larger crack/hole check this video out it may help
th-cam.com/video/7sOE0CmNWlU/w-d-xo.html
And thank you again!
Thanks for sharing. Wise woman
Thank you!😉
Thank you so very much for making this video! You've earned a sub!👊🏾
It's definitely hard to wash off your fingers, but trying to use gloves is a total headache. Fingernail polish remover helps get it off your skin. I'm not nuts about having all these chemicals on my skin, but dang this stuff works so well.
OMG, thank you for making it super easyJet to follow.
You are welcome… And thank you for watching!
Thanks for the video !!! ❤
Best DIY repair video on this topic I've seen so far, thanks, what is the ETA on the next video of painting it??? Can't wait
Thank you! I am not sure but I will keep you posted it’s coming soon!😉
Thanks for the video- it was a big help !
I am so glad, thank you!
WOW thank you 😊
Thank you for this video!
Thank you for this helpful video! I was overwhelmed thinking of how to fix this! I'm a bit sensitive to strong odors. Dose this epoxy (and the paint you'll use in the next video) have a strong odor? And if so, does it go away quickly? Thanks again!
The epoxy is not bad, but the paint you need a respirator😉 and lots of ventilation so yes, it will probably get to you
Just what I need to do,thanks for info!
You are welcome, thank you!
Thank you
You are welcome… Thank you!
*"If you can't duct it, fuct it!"* 😅👍
thank you!
You are welcome😉Thank you!
You are awesome Thanks
Nope, wrap it in plastic wrap and put it back in the tube. Because you've squeezed the tip and mixed it some, it will start to harden if you just shove back in and close the cap.
How to repair the rust around the draining hole of a bathtub, please?
If it is just rust on the surface, try sprinkling some baking soda on a sliced potato and rubbing that on the rust spots, if the rust has eaten part of the porcelain, you can use this product to fill any dips that may have occurred after you clean it… See if this helps
Can I hand sand it?
Hello, great video!!! Where can i purchase this product???
Literally I was thinking of duck tape.
What would you recommend for any blisters that seemed to start appearing underneath the bath mat?
I would sand them and try using this product to level out the surface… because when you sand it it’s probably going to chip it…keep me posted!
@@WhatTheFoxSherriFox - One other question about that. Now my tub is I guess older. The entire tub and inner showet wall is smooth, no tiles. Anyway, how can I go about coloring it right? I don't consider this an almond or biscuit color. I'd almost dub it a "light olive" color. Maybe I'm wrong though.
@@Chewbigga have you considered painting it? I just painted one not too long ago now you can give it a smoother finish and step up your sandpaper and use 200 300 400 grit after using 80 grit … Color matching it to spot paint it might be difficult
th-cam.com/video/xkA2zpLgmCU/w-d-xo.html
Hi my favourite,
I want to relocate my standing shower faucet. How to fill old faucet hole . This maxx shower plastic wall. Not a fiber glass shower walls. Please respond quickly. This shower wall has 3” space from dry wall because it has 2x4 studs to support this shower wall in between drywall and standing shower wall..
It should adhere to it… Just give it a try!
Where’s the video ??
I appreciate your help.
Thank you, you are welcome!
I tried this. My reality with this stuff was that it needs to be mixed between your fingers to a uniform color. While doing this it will begin to adhere to the fingers. Once that happens it adheres thicker and faster. I have no idea how she did this with a French manicure. You'll see.
🤣👍
Lol! She’s got that Southern grit!😅
Does it work with a crack in the shower floor , with the crack being as long as your pointer finger?
It very well may, it might just depend on where it is if you are standing on it and putting pressure on it, but it’s always worth a shot
Mine is coming from the drain which is located in the middle part of the tub twisted the back wall .
Just took my 1st shower in my brand new tub/bathroom and noticed contractor must of dropped a tool because I have an impact crack! So now I’m here.🥺
Oh no I hate to hear that😞 I hope this helps! Keep me posted and if you have any questions I’ll do my best to answer!
Hi, I like your tips and format except for the background music. Thank you for your information. You don't need that noise in the background. 🌞
I figured the music would be better than what I was really saying LOL😉😜 thank you!!
@@WhatTheFoxSherriFox Awww - you're great! And funny! Thanks again for all your tips!
Does this work on rusted out holes, or only fiberglass?
It should, they make several different kinds, give it a try and keep us posted on it! Thank you!
Will this work on a cast steel or iron tub?
I would think that it would, they make different types and I am thinking there is one for metal/steel
@@WhatTheFoxSherriFox Thank You!
are you supposed to wear a mask when sanding bc epoxy putty can be dangerous i heard to your respiratory
Aren't you scathing the fiberglass with sander?
Yes, it will then need to be painted, but at-least there won’t be a hole 😉
Thank you for this video!! I had no idea this product existed! I hope you can answer this for me. If you have a really long crack in the base of tub (you know where you stand and move around on), will this stand up to a persons weight once fully cured? Right now I've been using Flex Seal Paint and it eventually starts to come up so I have to redo it every 6 months or so. This seems more of a permanent fix but I'm just not sure if weight put on this method will work. Also do you think putting the Flex Seal Paint over it will ensure a greater safe fail for any water or mold getting through to the floorboards? The person who installed this tub didn't do it correctly causing the new tub to crack at pressure points. This is an apartment so I don't want to incur any charges once I leave. Just looking for the best solution to fixing this darn tub.
Can you send me a picture to sfox831@gmail.com of the crack?
The lady lotus recommended a good video that may help in your situation for some reason the link didn’t appear public so I am reposting... it’s a great video that may help you
th-cam.com/video/6viyWyjWL8E/w-d-xo.html
See this video to also fix for what to do to hold weight of person in tub/shower th-cam.com/video/MKGbGtO_vbw/w-d-xo.html
Thank you for the video! Do you have any suggestions for something that could be sprayed or painted over the patch to match the off-white/ almond/ biscuit tones of older tub inserts?
I am sorry I do not have any suggestions…You can paint the entire bathtub which I will leave a link below… but I am unsure if there is a way to try to color match that… I apologize for not being of more help.. thank you!
th-cam.com/video/xkA2zpLgmCU/w-d-xo.html
You are so smart and sexy and your delivery is so good. I’m from Nashville; i may have to write you a song. Tell your husband he’s a lucky guy!
😉💞thank you!
Thank you so much for the information.
You are very welcome… Thank you for watching!
I'd like to see it fill a hole the size of a half dollar
It will, may take several times but patience is key 😉
@@WhatTheFoxSherriFox Amazon reviews said it never hardened and/or didn't stick very long.
@@WhatTheFoxSherriFox I just read one of your comments about this issue with hardening - I think the person on Amazon did not knead it completely before applying it. That's the issue. Gonna get this stuff.
@@WhatTheFoxSherriFox Does it require some mesh behind the hole to keep it from sinking into the hole and for support until it hardens or does the stuff support itself while soft without collapsing into the hole (half dollar size hole) from your experience??
@@chrism.4544 no it doesn’t require any mesh it will support itself, if you have a hole that big you may have to apply some let it dry and then apply some more, but it should work…I have patched very large holes where handicap rails came down from and it worked beautifully…. Just be patient with it and keep me posted how it turns out!
Paint?
Yes paint it 😉
th-cam.com/video/xkA2zpLgmCU/w-d-xo.html
Well, I didn't knead it long enough and now 2 days have past and its still tacky. Oh well, hopefully one day it will solidify. Should have watched your video 1st.
If it’s tacky take it out throw that away, you already have a hole in your tub so it’s not going to matter... follow the steps in my video and do it again, knead it until it starts getting a little warm and becomes one color, fill the hole check after 1-2 hours ... keep me posted and let me know how it turns out! 😉
Checking in on your project, did you leave it or did you redo it? 🤔
@@WhatTheFoxSherriFox I picked out what I could and replaced it with better smooshed up stuff. It hardened up like it should and just currently letting it ride until I can borrow my friends small sander to finish it off. Thanks for checking back up.
@@mazzola7980 great news!👍 just remember you can always add a little more if for some reason it doesn’t sand smooth just by repeating the steps, I am glad it worked!
Stop with the stupid loud music. Can't hear you. Why the insane loud music.
This was an older editing software i’m still learning they will get better😉…but thank you for watching