Super Glue and Baking soda ! Pour Glue on Baking soda and Amaze With Results
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2022
- In this video, I showed you how to fix your broken items using glue and baking soda, known as super glue or ca glue. Using baking soda and super glue together is a much more effective and durable method than repairing using cotton and super glue.
Inventor 101 #superglue #ideas #lifehacks - แนวปฏิบัติและการใช้ชีวิต
New video ▶️th-cam.com/video/ImLAmfM_AgA/w-d-xo.html
what happens if you dissolve the baking soda in water and add it to the super glue, instead of using the powder form?
@@bikedawg Try it and report back.
@@bikedawg 0⁹0⁹
So, polymerization?
How does this method compare to 2 parts epoxy glue?
After watching this video I'm considering constructing a house made entirely from baking soda and super glue. I will have poignant mood-music playing on site while I work.
Haha, super glue - baking soda is the new ramen?
Try super glue and cocain. It will increase the home value :)
Same!
all you rilly need is a set of redundant gears
Hahaha!
Things to note: Small amount of powder, small amount of glue, let it set and LET IT COOL, then add a small mount of baking soda, small amount of glue.
This is a highly exothermic reaction. In large quantities it can get hot enough to melt or possibly ignite the material being repaired.
The reaction between the bicarbonate (baking soda) and the cyanoacrylate (superglue) forms polymers, or chains of atoms, which is why the resulting solid is stronger than just superglue alone.
These polymers can become brittle below freezing temperatures. Keep that in mind if your repair will be exposed to severe cold.
A good way to add your powder is to put it into a salt shaker, This helps you add small amounts at a time and breaks up the lumps into a finer powder for a neater finish.
Massively under appreciated comment - thank you!
THANK YOU! last thing i need is to start a fire in my room or i’m getting kicked out for sure
Thank you!
I saw a video where they said that this method was used for repairing helicopter blades (superglue and sodium bicarbonate). how far below freezing are you talking (becomes brittle)? have you heard this about helicopter blades?
That is absolutely correct. As a copier technician it's got me out of jams numerous times in the last 25 years.
Wow! I never knew superglue was good for anything besides gluing dry skin together.
LOL--true
Reading this with my pointer finger and thumb stuck together from super glueing my glasses.
Me too. why does it work for everyone except me.
😂
Lol...
That plastic gear repair was some well thought out work. Well done.
Seriously, I thought it was brilliant!...
Some well thought out, meaning it can be done better?
@@OneAndOnlyZekePolaris you're thinking 'somewhat'.
But it wasn't shown how the outer gear (the mold) didn't stick to the new material that was poured into it.
@@MartyThePastaGuy because it was silicone
I'm actually extremely impressed with the gear repair hot glue mold, and the hole filler. Pretty genius.
That gear repair was genius.
I used a similar method to repair the gearbox in my Ford Focus, 45k miles later it's still shifting nicely and never misses a gear! ⚠️😲👍
The baking soda/super glue combo had me like "that's dope, I should keep that in mind (knowing I'll forget and never use it). Then I saw the gear mold and filling a drill hole and all of a sudden I have a handful of things I'm about to fix this weekend.
I would prefer to glue a wood dowel into the damaged cupboard door. But the gear repair is genius hopefully it sticks in place.
I wasn't getting it until he filled in the missing part. blew my mind.
My brain exploded when I saw these genius methods, but I quickly put it back together using super glue and baking soda. Thanks Inventor 101!
🤣🤯🙃
🤣🤣😭
Yeya!!
This is old school nothing new
_“that’s a lot of damage_ 🎵
_how ‘bout a little more!”_ 🎵
This is about a million times better than every "life hack" video Facebook Reels has EVER showed me combined.
Seriously
The gear repair was genius. Then I saw the particle board. Mind blown. Life changed forever. 👏
any normal wood glue with do the same on particle board, if you use wood glue to join 2 pieces of particle board together, it will break the wood itself long before the join will break under pressure.
@@notfiveo Yeah see there's tons of ways to repair holes that will last, but what I find most intriguing is the sheer speed with great durability. I was hearing someone talk about how a luthier swears by using baking soda and super glue, and that's what got me thinking about it.
You can buy this for yourself and it's already done it's called "Q bond"
You dont have to be a hack and use baking soda...
Trust me you think you're life is changed now...
Go buy some Q bond, and fix literally anything from ceramic cook pots to water pumps, it ridiculously strong.
Just do it trust me
The gear repair was genius!
Yeah, that's thinking like 5 steps ahead. Impressive.
Takes an engineer's mind & bit of work but when parts are needed but can't be found
@@paulaball8725 so true. Too often can't find the part
I was impressed by that too
I consider myself pretty good at things like this but that gear repair 🤔 I'm a dumbass.
This really is pretty amazing. If I had known about this long ago, there are so many things I could have repaired better. I had no idea these two ingredients could form such a strong material, and bond. And thank you for showing the broken gear trick, there has actually been several times I could have used that trick to fix my sons toys.
С песком ещё крепче только сверлить будет очень трудно
My friend I know this technique 35 years ago.
Huh. This is the first Chinese Content Farm video I've watched that actually seems useful.
The gear repair was worth the watch alone. I never thought of using hot glue as a mold. Absolutely brilliant!
I'll have to remember this if ever I have to repair a plastic toy gear.
Just check shrinkage as it cools.
This. I known about baking soda and super glue but never thought of the molding technique.
I've seen it done w candle wax too.
So? Hot glue and baking soda work the same as super glue and baking soda?
I've used this trick for years to fix my kiddos toys. So glad someone made a video 👍
Hobby train enthusiasts and miniature painters commonly recommend superglue and baking soda for bonding because the baking soda also fills in the gaps! Thanks for the video!
Finally after all these years I’ve found the way to glue bolts to my bottle tops….life changing
I love repairing little things around the house. Will add this to my repertoire!
true mainly for when your had a screw/threaded bolt come out stripping that spot good filler to have
Don’t you mean your….. repairtroire 😏
ok sorry I’ll leave
Then you'll need to repair the repair after failure.
Bonus points for using repertoire.
As far as stripped/oversized hole in wood/composite materials, you can also use pieces of wood toothpicks and saturate the hole with wood glue. Takes longer to dry but wood glue is a lot more forgiving before it sets if you make a mistake.
Sawdust works great
Will it work with all purpose flower or talkpowder?
@@randywatson8347
I doubt it, those don't have much structure.
For the same 4 dollars, I just use wood filler and wait 12 hours for it to harden.
Sort of like when my wife wants me to sleep in her bed.
@@DevJB Lol! Your wood filler takes 12 hours to harden?! Your wife is very patient.😉
40 years old I've never seen anyone do this or even mention it before!! Thanks for the solid tips !!
I know right? Who the hell knew about this secret and kept it to themselves for all these years? Bastards! Could have used it many times.
Marling Baits viewers have been seeing this trick for years. Still a mystery as to how it works so damn well thoughj
I learned about this about 40 years ago so I guess I've known of it your entire life...
"Solid tips" was that a deliberate pun? If so, then this is the best comment here.
@@JohnnySins-tk5rl In the main comments someone briefly explains the science behind this chemical reaction. It's really quite fascinating.
I did this trick when working on a craft project. Things to note: first, the glue dries almost immediately when mixed with the baking soda, so you have to work fast, and second, it is very hard to get a smooth surface. You will have to heavily sand, to the point of using a Dremel tool, go get it close to smooth.
You don't have to work fast at all if you do it correctly. Don't drop it in as it starts hardening. Drop it in first and then harden it.
Hi dear
@@hmebutt8215 Someone thinks they are on a dating site.
@@OneAndOnlyZekePolaris whos you
@@hmebutt8215 Someone that actually knows how to use TH-cam, unlike you.
I reattached my severed fingers after a tragic milk carton accident this morning and have already fully recovered thanks to this video! I only wish I'd added some cinnamon or mint to the baking soda for a pleasant post op scent.
😂
Good one!!! Thanks for the laugh!!!!
Actually, 😌
Apparently if you break a china plate or chip a cup, and realign the pieces while soaking it in milk (buttermilk 🤔...i forget) ... The porous ceramic edges will 'mend' back together!
@@theriddlerUSA Riddle me this. What happens when you use super glue and baking soda on severed digits? Sticky fingers!
@@RLaraMoore So what you're saying is if you never want to chip a china cup, only drink buttermilk because it will instantly mend itself the moment it's dropped! 😂
I used this on my guitar "nut" (the slotted part where the strings slide through on the head stock).The nut groove was too deep because I was going with a lighter guage string so I used super glue and baking soda it was hard as a rock when cured almost instantly. I then just cut a new slot with a razer blade an a file.That was 5 years ago still holding strong.
Rock on! 🤘😎
You define what a nut is but use headstock to define it, but I don't know what a headstock is
@@whoeverofhowevermany The headstock is the thing that holds the truss adjustment bolt. I hope this helps. 🎸
@@whoeverofhowevermany Google!
Yes! This is the exact sort of comment I was looking for. Ive played 23+ years....somehow. I do lots of mod work, repairs, builds ECT and this is interesting stuff. Glad to hear it's good for guitar work
Used baking soda and super glue to fix my sour attitude at work. Got a raise!!!
Thanks Super Glue Guy!!! 💪
So many wanna be stand up clowns here
@@WestCoastUSA546 do you need a Trauma Doll to show us where the humor hurt you sweetheart??? 🤡
@@WestCoastUSA546 so?
Ha ha ha ha 🤣🤣🤣🤣
I need to try this
You have literally brought new meaning into my humble existence
Actually, cellulose works better, Cyano-acrylate reacts with wood and paper better than baking soda. Save dryer lint from cotton t-shirts or bed linen, no polyester blend. or . . use fine wood sawdust. . . Baking Soda is nice if you want "white", like on a repaired guitar top nut. But you need the fibers inside to prevent the new amalgam from cracking when it gets older.
Actually a great point! Thank you, now I have a use for all that dryer lint!
What about dog hair? I have plenty of that.
I was wondering about this. He shows super glue with various materials such as baking soda, cotton and cement. I was curious about the advantage of each one.
The gear being repaired was very poignant to me. All that effort in a throwaway world goes largely unappreciated by the largely unappreciative population. I liked it lots!
I had an electric pencil sharpener in which the nylon drive gear disintegrated. I found a 3d-printed replacement for ten bucks on eBay that let me keep a cool old bit of office supply out of the landfill.
Thanks to this, I made myself a new tooth for my tooth hole without a dentist!
Things taste odd and sometimes I smell colors, but damn is it solid!
Lol!!
Man that was funny as hell!
😂😅😂❤
You the man
😅😅😅😅
This felt like a mystical experience instead of a simple glue trick.
I’m glad you had the experience. I am still waiting to be amazed. Is that is a part two?
@@MarcosElMalo2 Watch it while slightly intoxicated, if you are legally old enough to that is.
Anyone else click on this video thinking the glue and powder would explode?
For wood repair I use saw dust from the same wood to make it somewhat invisible after sanding and polishing.
where do you find the saw dust from the same wood?
@@TomatoTomato911 you can sand some away
@@TomatoTomato911 Yes, as Mr. Manuel said. You can collect some from either sawing, filing, sanding, or drilling from the same wood piece you're repairing. That's why when I'm wood crafting, I collect some debris just in case of repairs or filling in some holes/cracks.
And you make a paste using wood glue or the cyanoacrylate ?
@@maximeb190 wood glue
This man rediscovered 3d printing
I was thinking the same thing lol
This is way stronger than any consumer 3d printing... they use this kind of fix on helicopter rotors.. it's insane how durable a usually brittle substance (acrylic) get when it bonds with a proper filler
Came for the baking soda and glue, stayed for this banger of a song.
Sosso by Magnus Ludvigsson
Dude, you got me breaking everything in my house just so I have an excuse to fix it with Super Glue and Baking Soda.
Saw where you made this comment (2 days ago). Still laughing my ass off!
As a hobbyist, this will now be one of my all time favorite tricks. Way cool!
Add paper towel into the mix for a material that rivals fiberglass epoxy.
WHY DO THEY NEED BAKING SODA
Sure
@@Keys879shavings or like a lasagna?
Thank you for posting! Super glue plus baking soda seems like an incredibly easy and practical fix for so many shop and home projects. I can't wait to try some of these fixes!
]
It's known for its use in repairing guitars.
I’ve used this for years as an RV Technician to repair damaged side wheel panels and anything plastic, except we purchased an actual product of the 2 mixtures!
That showing in the fabricating the plastic gear was something I really learned from!!! Wow awesome!!!
That was way more useful than I thought it was going to be. Good job.
I have been telling people about this very thing since the early 90s. After my grandfather fixed one of my plastic childhood toys I never forgot about it.
Good ideas, thanks, I enjoy your precise abilities. Very good for the home/hobbyist.
I literally have three warehouses full of superglue, baking soda, bolts, nuts, and plastic bottle caps. Now I know what to do with them. Thanks!
Hello vault dweller. How goes it in the commonwealth?
I have 5 warehouses full
@Peter I just checked my stock it's almost 6 warehouses of this stuff.
@@p098098098 you win!
my life has been falling apart but thanks to this video I can finally put it back together. I will build a monument out of super glue and baking soda in honor of super glue and baking soda. I want to share this with the world. It is truly life changing. thank you my friend
Thank you for the smile it put on my face....have a great day...
Watt's Towers Redux!
🤣👍👏
That is the coolest thing I've seen for ages! I'm now looking at stuff to break just so I can fix it again!!!
Sweet vid!!! I've seen a few of these where one person used ashes & super glue and another where they used Ramen Noodles, of all things, to repair stuff. Kudos to Yall's Creativity and Ingenuity!!! Keep it coming!!!
This is actually a pretty well known trick in the hobby/modeling community for creating extremely durable snow/ice model bases and terrain, though I didn't realize that it was an actual chemical reaction or just how durable it was
Used for glasses repairs too. No longer a trick but more of science.
All it does is speed up drying and it actually makes the end result considerably weaker than just super glue on its own. If you want a more durable base for your models mix sand with super glue, it is a lot stronger. Baking soda is only used to speed up hardening, nothing else.
I just used super glue, baking powder and a popsicle stick to cure my ED.
Thank you!!
Me, too, except I used a yardstick.
@@MrTruckerf 😂
Rock hard now 😂
The gear repair was pure genius!
Wear safety glasses when using super glue. It's no fun to get super glue in your eye.
I was using a thin tube to apply super glue. I had the work close to my face in order to accurately place the glue. As I squeezed the bottle, the small tube popped out and the glue went into my eye. The thin tube was curved in a way which caused the tip of the glue bottle to point at my eye.
Another time I had a brand new bottle of super glue. When I attempted to cut the tip of the applicator open, the super glue shot out of the tip into my eye. The glue had been packaged at lower altitude than where I live so the bottle was pressurized.
Both times I managed to pry my eye open and flushed my eye with water for as long as I could stand it. I didn't have any permanent damage to my eyes but I now make sure to always were safety glasses when using super glue.
Glad you are Ok. Thanks for the good advice. 👍😁
I have a friend that was building rc planes, and went to put some eye drops in his eye. You can guess the rest.
@@lamarw7757 I did that with peroxide once. That wasn’t funny
Twice? That's like getting struck by lightning ...
Glad you managed to get out of a sticky situation.
Nice video man and great idea! I like the practical use of this. Who would have thought that combining baking soda and cyanoacrylate would create such a strong substance for use as a replacement for various parts-stronger than cyanoacrylate alone. Going to try this to fix some drawers and as an underlying layer in a wood door, which hole became stripped, to place screws in. 👍🏻 Keep up the novel ideas and the great work 👍🏻
Baking soda is great for many DIY projects. It's good for setting plaster too, making it last longer when spreading.
I could fix a kitchen drawer using the final tip. Thanks!
You are the best, love how your brain works and your patience too. Thank you 😊
This man is a genius!!! Baking soda?!!
Use a drinking straw to place the baking soda in hard to reach places or when you just want to add small amounts at a time. Great way to build up fine gussets too.
Thanks for this!! Just fixed my door handle which was broken for 3 months!! Couldn't find baking soda so used corn flour and it worked perfectly!!! 😄😄
Hmmmm..maybe youre onto something..
I think any powder would work. It acts as structural filler since the glue alone is watery and runs thin
@@BlackJeepConvertible maybe non-silicate though? Or maybe sand does work, hard to say...
Couldn't find baking soda? Are you on a dessert island ?
@@tsfurlan called his house 🤣
In my 40s and I cannot believe that I am just now learning about this baking soda + super glue thing... definitely a nice lil hack that will come in handy someday. Thanks for sharing 👍
Almost as strong as getting super glue on your jeans. Turns them into motorcycle knee pads 😂
The most useful video I ever watched in my entire life! Thank you for sharing!
Your life must suck big time.
😂😂🤣🤣🤣🤣
Thats what happens if you live in a dark cave.
Seen a man fix a hole in his boat in the Philippines 🇵🇭 the exact same method I was astonished on how superglue and baking soda was so strong
Does the baking soda chemically react or does it just act as a strengthening filler?
@@soundspark "Chemically, the bicarbonate molecules in baking soda react with cyanoacrylate to create a reactive ion that more easily bonds with other cyanoacrylate molecules. These bonds establish long, polymer chains that are stronger and more resilient than cyanoacrylate-water bonding. The resultant substance is a super glue and baking soda plastic with a cement-like consistency that creates stronger, exceptionally durable bonds." Was wondering the same thing.
@@viper1431, I would have tried to sit next to you in class. Thanks for the explanation!
@@servant72 I'm thinking wikipedia
@@viper1431 Great explanation! Question... is this the similar type of liquid glue created that uses UV light to quickly harden instead of the baking soda? Or are they the same thing?
Holy hell. My kitchen cabinet door just broke last week and this video is a godsend!
Just what I was thinking!
Did you try it yet?
@@MrPlannery I did, and this was a godsend! My cabinet door is good as new. I even filled in a few old screw holes in the garage.
@@batmanofsanantonio5331 I'm looking for things that need fixing so I can try this...
Amazing! If I ever find myself stuck with a broken cog-wheel, I’ll remember this 😃👍🏽
Only thing I would have added is a comparison of plain super glue vs super glue plus baking soda on the weight holding test. Otherwise great video looking forward to more 👍
I agree, without a comparison we can’t even tell if the baking powder really does anything at all.
We could be wasting baking soda because of this guy, for all we know.
I've discovered that super glue needs a bit of moisture to set properly. Often the plastic frames on my cheap reading glasses break and shrink. I tried super gluing them to the plastic lenses and they always broke again. Now I wash and rinse the glasses first which leaves enough moisture in the frame groove to "set" the super glue. So far this holds much better. The Krazyglue hard hat commercial didn't seem to add moisture or water to the test. Before my discovery of the moisture trick I found super glue to be weak and unreliable, and often resorted to epoxy. It has always seemed to work well when gluing your fingers together!
There is a commercial plastic repair product that consists of a tube of super glue and an amount of black and white powder. On-line critiques were that it was just baking soda.
I wonder if there is any relevant chemical reaction between the super glue and the added powders, or if they are just aggregate like the sand and rocks in concrete, or the sawdust with wood glue?
@@henrikaugustsson4041 it makes it set immediately at least lol no waiting time
New trick for me. Definitely going in my knowledge banks. Definitely has a lot of practical purposes for quick repairs.
Most everyone has super glue but few people have wood putty and liquid steel handy, let alone so quick drying. I mean instantly drying. Much faster drying than a puddle of super glue alone and the strength is amazing.
Thank you so much for your video. I dropped a delicate glass Christmas ornament and tried using it crazy glue, which didn’t work . Then I remembered your fabulous videos and brought out some baking soda and it works perfectly !!!
So wonderful, my husband is amazed and re-thinking all sorts of problems!!
Thank you!!!
Cap
@@sawboss5794 facts my nigga G
Wow the stripped screw hole on cabinet door so useful
👍I just watched this because (based on the thumbnail) I thought something was going to catch on fire or explode...
Instead - I learned how to fix the exact problem I have with the hinges on one of our cabinet doors. Bravo.
I've seen this done in toy car restoration. It actually works really well for particular purposes. You can sand it into shape, much like plastic. And it does paint up well too. Has the consistency of hard plastic
It sands like plastic and has the consistency of plastic because it is plastic. The reaction forms polymer chains.
Genius
Some of the methods of creation and repair here truly takes a puzzle solving mind of an engineer.
Its amazing. I tried this on a broken piece of brass and it WORKS!!! I used Cyano-Acrylate and Dry Powder Graphite also, which is just as good.
I've been so frustrated in the past with the inefficiency of super glue on repairs. This will help. Thank you.
I can think of at least a dozen times that I could have used this idea in the past and I am sure I will be using this method in the future. Great to the point video.
You just pushed the envelope on home glasses repair, and we thank you.
Some say he still has super glue on his finger tips to this day.
Brilliant. I'm so thrilled I discovered your channel. This video alone is going to solve and create so much. Im an artist and love stuff like this. thank you
This is where you have to decide, should I spend 20 minutes creating part of a missing gear, or do I spend 20 cents buying a replacement?
Well, if the replacement part is unavailable, that goes without saying 😉
@@mino73T11 and if it IS available, does that also go without saying?
@@RetroKid yep! 😉
@@mino73T11 - I'm pretty sure that gear cost more than 20 cents. Add shipping costs and I'm positive it costs more...
I’ve seen this trick before but your examples are the first that gave me so much inspiration. I can go fix a couple of things now. Thanks!
Thanks for the tips man! I can fix so many things I couldn't before.
Loved the repair for the gear, thanks!!! 💖
I discovered this powerful combo by accident when I was cleaning out a cluttered sink cabinet & found a spill turned into an unbreakable solid.
I use it for so many repairs now, works great for so many different surfaces. A Dremel is useful for smoothing out sharp edges, getting even surfaces, buffing for a shine AND for sanding off accidental glue globs 😬.
When repairing ceramics, if a crack will be large & noticable, I'll add the base pigment (of whatever it is I'm repairing) in powder form to the baking soda so that after it dries, all I have to do, if anything, is paint any small details with acrylics.
*As a note, if you plan on using pigment, you'll likely need to double the pigment to offset the white soda. And always test your pigment/soda ratio for the right shade BEFORE applying superglue!
All in all, in using this stuff & learning different tricks, I've got to point where even I have trouble finding where the repair was made!
I love the choice of music. This video was oddly calming
th-cam.com/video/v8tA617gPeE/w-d-xo.html
Does anyone have the name and artist?
@@acudaican th-cam.com/video/v8tA617gPeE/w-d-xo.html
Id love to know the artist too
@Av Latta Meguca 老爺 @@justinmansoer4385
Heyo 👋 I just looked it up, the song's name is 'Sosso' by Magnus Ludvigsson
I just used Loctite Super Glue to fix a bathroom nightlight, and the superglue didn't work. I was regluing a shell to the plastic switch. I was very disappointed! I decided to do a search for glue that would adhere a sea shell and plastic together. I found nothing, but I found your channel. I said, what do I have to lose? I tried it and it worked wonders. That shell's go'in no where! What a wonderful gift from above. I thank the Lord, and I thank you!
Our plane was late to depart the other day, I was worried watching the engineers look at the engine but then one appeared with a large bottle of super glue and baking soda. I felt OK then.
and duct tape 😂
OMG! I've never seen anything like this before, but you can dang sure bet I will remember and use this at some point in the future. WOW! Thank you!
I learned this trick years ago. A Super Glue bond is pretty brittle, but if you mix it with just a pinch of baking soda (no need to dump it on like in the video) it hardens like concrete. You'd have to saw the bond apart once it's hardened. But you have to be very quick because you only have a few short seconds once they mix.
I am SO impressed! Going totry this on the broken base of one of my antique lamps.
ive been doing repairs with it for years. always in my tool box and in the the car for emergency also great for camping and the boat.
This trick also works well on minor vinyl window cracks/holes and fiberglass bathtubs. May need to apply a light clear coat or color matched coating.
Wow! I am absolutely amazed … the very thought that you can repair and mend almost anything with super glue, baking soda and sawdust. Who knew? Thank you so much for your insightful content. Keep em’ coming. Subscriber for life. Btw the gear repair… bravo.
The gear was very well done! Thank you.
WOW!!! Thank you so much for sharing your tips and tricks with all of us and I’m very impressed 😊
Give super props and praise to this guy.. he's a Genius.👍🏾👍🏾
I used this trick to put a base on a D&D monster mini once. I had to use some thin cardboard, but I also used this technique to build up the base a bit like it was terrain under its feet. :-) Looked really good actually.
I used to do the same, only with extra thick CA and store bought CA accelerator to assemble the minis, then the glue plus grass or sand from model railroading for the terrain. A well painted miniature deserves a nice base.
Most Vids like this aren't very useful but yours is fantastically helpful.
Thank you
You guys are great❤ thanks! You are lifesavers!
A lot of us nerds have known about the baking soda trick for quite some time. Chemistry is awesome. Thank you for sharing this super cool trick for the masses!
Is chemistry involved here? I thought it was simply adding some structure like when you add sawdust to wood glue to fill a hole or imperfection. It works well for low strength structural repair like as seen in this video. Is there something more complex going on here at a chemical level?
@@xmo552 - Yes there is a chemical reaction taking place that creates "longer polymer strands" as someone explained in an earlier comment.
@@aleanufopilotftlcertified5663
Didn't catch it. Thanks for the insight.
@@xmo552 - You're quite welcome.
This is great to know.
I liked how you fixed the cogwheel.
But I found it especially helpful to know that it's possible to use this method as a hole filler 👍💕
You can just jam toothpicks or matchsticks in the hole, then reinsert the screws.
You know what else makes for a good hole filler...
Another way to repair holes in wood is to drill it to the size of a dowel, glue the dowel in the hole with wood glue and then trim… once it’s dried the repair is stronger than the chipboard as dowels are made of hardwood
So many good ideas, I'm going to use this. Thank you.
Super glue and duct tape never fail when I need to fix something
Speak to anyone who does any kind of plastic or resin modelling ... we've used this for years. Always good to share with some newbies though 🤷🏼♀️
I’m that newbie. I never work with plastic or resin so this video is amazing to me. Glad these trucks are being shared.
Always share
At first I thought this was clickbait, but man did he deliver! Those are some really cool ideas!
very impressive vintage weight! the curing process is cool too! definitely going to start working with this in mind. sprocket repair ftw
Thanks for making me discover Magnus today. I'm so very grateful!!