Linear Valve Offset Procedure for a Gen 2 Prius using Toyota Techstream. Potential Fix for C1345.
ฝัง
- เผยแพร่เมื่อ 14 พ.ย. 2022
- Tutorial on how to do a Linear Valve Offset Procedure for a Gen 2 Prius using Toyota Techstream. This has the potential to fix C1345 (Not learning Linear Valve) and C1256 (Low Accumulator Pressure). But it is not a gurantee.
- ยานยนต์และพาหนะ
How do you get working software and dongle ?
You can get cracked software on ebay and sometimes Amazon as well as the Mini VCI Cable. Search Toyota Techstream and Mini VCI Cable on Amazon/Ebay.
Can't recommend one specifically as the seller I bought from is no longer available.
Thanks for saving my Prius. I was getting all sorts of codes before I calibrated my new skid control unit.
Thanks! This was a life saver, Joe.
thank you for video. going to give a try. on a 2008 prius that i just got,
Awesome tutorial now I hv to get my hands on the program and panasonic device. And brake flush would need to of been done first if replacing actuator?
Hi What was the code or condition you were fixing?
My Prius accumulator keeps running after pulling the key and shutting the driver door.
The AUTEL MK808 will do the linear valve re calibrate on 2011 Prius. The TopDon TopScan has the function also but i have not tried it. I used the Autel on a 2011 with very noisy brakes and afterward it threw the 1345 code. I replaced the Master cylinder and pump $1100. You need a scan tool or tecstream if you replace the master cylinder.
My MK906 wouldn't on a 2nd gen. You're luckier than me apparently.
I tried on the Topdon and it went through the procedure but didn’t clear the codes C1345 and C1368. I’m thinking the clear memory function on ten Topdon didn’t work. That’s the only thing I need to do.
Is this required to get the abs to start pumping?/providing pressure?
mine stop half the way, do you think is a problem with the hardware unit or air in the system
Do you need to do this after changing the ABS Pump Actuator? I did the bleeding process using Techstream but I didn't do this afterwards. No codes.
Yes you should do the linear valve offset procedure after changing the pump. Probably not 100% necessary as I'm sure the Prius attempts to detect the valve positions without the calibration... but the Calibration will ensure it is working 100% correctly.
what wrong when the lights do not brink
hello. Where did you get that program? Did you have to buy it and how much does it cost in general?
It's called Toyota Techstream... it's an official Toyota Program for maintaining toyota vehicles.
You can get cracked versions off of Amazon from China for around $100 with the MVCI cable included which is what I did.
@@JoMopheethought it was on ebay
Not a guarantee? W a new actuator would it be guarantee
Yes if the error codes were caused by a faulty Accumulator/Actuator... a New one should fix the errors and brake issues.
Do you have a link for the software and dongle that will work like yours ?