The long awaited return of the Honda Odyssey series is here! Thanks for all the support guys! What do you guys think so far? Check out our new shirts and stickers here! www.grindhardplumbingco.com/
You should think about putting the brakes back on it and hook them up to, one side only, cutting brakes. You can use park brake levers from a car as the handles. Just an idea. Keep up the great work.
The fact that you guys dont have 2mil+ subscribers is beyond me. Such an underrated channel with so many amazing builds, and somehow they all turn out great!
I have been watching you guys for a couple years now, its amazing to see how far you both have come! Ethan's fab skills and techniques were great to watch years ago and are absolutely mesmerizing now! On top of the great things being built, the filming side has improved immensely as well! Sick b roll footage and music makes these videos flow amazing. I'm so grateful for a group of guys like yourselves, creating content and sharing your builds with everyone! Thank You GHPc!!
It's like watching good ol' scrapheap challenge, but with properly cool projects, no (Discovery-)drama, no time window and more efficient. Love it guys. I keep smacking that like button every single time.
Absolutely fantastic! I can't wait to see that thing done. Ethan is a really good fabricator. Not to mention he's designing his own stuff too. Great job guys! Always impressed!
@ 1:50 I would not be under that especially considering you can see in the time lapse the hydraulics are fading. I would have rolled it on its side or lid. But all in all good video as always.
Hey guys not the nit picky or anything but please when you pick anything up with the skid loader and you are underneath it please add some type of support one of my best friend's brother died because he was working underneath a skid loader and the bucket dropped and killed him instantly I just don't want to see anything happen to you guys I love watching your videos
I mean, yeah. But did you see the mtv cribs: treehouse edition episode? The part where he climbs on the roof? Or when he goes rock climbing? People like this guy are consistantly aware of dangers in their surroundings. I'm sure he's familiar with his equipment and knows what to expect out of it.
I absolutely LOVE what you guys are doing with the odyssey! I started a odyssey 350 build like 5 years ago with a sport bike engine and a-arm suspension up front and a custom swingarm in rear that pivoted with the engine, and built a custom roll cage. I never ended up finishing it since I bought a house and sold it to free up some funds. Again, awesome job!
I'm a Millwright in P.A., you guys are my idols..... if you heated that part with a torch you may have been able to sweat it off the spline..... maybe at least burnt the rust that created the mechanical weld...... please keep this great content coming! God bless!
I could almost see a rooster tail on that donor bike with Ethan driving it and Edwin filming ,now that's quality. Also that pucker watching you guys work under that brat being held by a crusty bumper,, thrills and chills ,,, grind hard
I really dont understand how u guys dont have more subs and some type of a used atv / offroad vehicle business sponsoring you guys with some free messed up jetskis/snowmobiles/atvs/dirtbikes I feel like for a used bike place it be a great channel to sponsor and just hook the boys up with bikes with messed up frames and watch them turn the motor into some insane banshee powered toilet or something lmao. But in all seriousness love the channel guys keep the great content up
Great video! I have been a subscriber for about a couple of weeks now, and I'm not regretting it! I hope that I can eventually be like you guys owning a bunch of awesome rides and fixing/customize the hell out of them. You guys seem to have a lot of fun, and I hope that I grow up and be like you guys. Keep up the great content!
I love how you can see the hydraulics on the skid bleeding out as the car slowly lowers as you take weight off!! Good clips guys keep up the good work!!
I have not decided on motor yet, but a mid engine, long travel, newest fl 350 in the works! You guys are awesome. We can do alot more. We would all work great together with an offroad team. Just because something has not been done, the best ideas are still to come!
The 31 people who disliked this video have no taste in quality entertainment, or a healthy interest in awesome fabrication! Y'all just ignore haters like that, and keep on keeping on!!
I woke up this morning wishing that I would find a new video so I was very happy when one did Ethan you are a sick engineer I just love watching your guy's videos
You guys have one heck of a good channel here. My old best friend and I road circuit motocross and we were both machinists so we had some fantastic builds as well for back in our day. Keep up the great vids!
@@ut.turner Built 3 gocarts, a couple swamp buggies, modified some trikes etc. We also made some huge cannons with hydraulic aim along with a few hand guns but the one that took the longest was our bus conversion from a 64 International. That one took a long time but we enjoyed the crap out of it on the circuit. We road Amateur circuit so we never made it to pro but that wasn't the point. The point was to have fun and we sure did that. We also got into modified stock car racing for a few years.
I'm not much of a safety Nancy, but man being under a car held up by a bobcat makes the hair on the back of my neck stand up. Watching it bleed down on the time lapse was extra cool. Don't try this at home boys and girls.
Grind Hard Plumbing Co. is the type of you tube channel that you can find on both sides of the rainbow. I found an east coast you tuber worthy of the Grind Hard Militia, Andrew Camarata, he's quite the inspiring independent soul.
Im glad u guys got a po box. Its always fun to see what people think their favorite youtuber needs. Sometimes its awesome cause its perfect and sometimes its awesome cause its sooo far off base its hilarious. But no matter what, its always awesome! CHEERS!🍻
You use your brain completely different then ordinary people and it’s awesome the stuff you guys come up with is incredible I’m hooked and hope you don’t mind me using some of your ideas cool projects keep them coming
by far the Odyssey is my favorite build for it was always something I wanted to do.... So glad to find your channel!.. I was like what is he doing with that single pipe... then when you added the other 2 and I was like .."That's Beautiful!" ..... You are the undisputed Mcgyver Award Winner... Can't wait to see this finished!... Keep up the Great Work! That car is gonna be sick too!.... my second favorite build!.... :)
Loving the new music palette exercised on the past few videos. Great content as always, looking forward to all the crazy stuff already in the works, and to come!
Awesome build! One thing though, you've gotta adjust the center to center, or pretension on the drive belt. It looks like you're using Polaris P-85 primary and secondary clutches. The factory secondary, if it's a button, not a roller has an adjustable collar on it to help adjust the belt to clutch as it wears. Try turning it full min to full max. I don't remember if 1 or five is max, until the belt runs 1/16-1/8 above the top of the secondary clutch. It'll help taking off and not glaze belts as bad. If a new belt doesn't get you there you may have a wide belt clutch, and a narrow belt. Certain sleds. The XCR800 RMK 800 all used wide roller, wide belt. Most of the other sleds at the time used a narrow, narrow set up. It looks like you're running a toasted belt, or a narrow belt on a wide clutch set up. You can shim the primary if need be to match the secondary and get the belt to ride up just a hair above the secondary, or buy shorter belts if your current center to center is out a bit.
Man I love the stuff you do. I day dream about this stuff, knowing Ill never actually put the work in, and coming to your channel scratches the itch. Keep up the good work.
It's crazy to me that Ethan has basically built all the hotrods on this channel by himself. Damn dude you do work! And thanks edwin for documenting everything in such an entertaining way!
Set the diff in a tub of ice water and leave the spline you are trying to remove sticking out above the water. Take a torch and heat up the end of it to enlarge the female spline. It might pop off easier with that. I have seen things set by milling holes slightly smaller than they should be and heating them up for fitment. Once they cool back down to room temp, they are set unless you have a press or you heat it up again.
Finding all sorts of uses for that new lathe, I see. This is an underrated modification in terms of difficulty. All those degrees of freedom from the linkages, you gotta be precise or it won't be symmetrical and then the driving dynamics will be weird. Hope everything works out, but based on your track record for fabrication, I have tons of confidence that it will.
I dont where you learned so much about building all that stuff but its awsome I swear I wouldnt be suprised if I saw a video where you build something you could fly in outerspace.
I am building a custom shifter off road kart out of a baja blaster go kart. If you got any ideas let me know. I put polaris a arms in the front its going good so far. Keep the modesey going its my fav one on the show !!
That diff cup is exactly how every repair I've tried on my 2013 Outback has gone.. control arm bolts, wheel hubs, ball joints, they all might as well be welded in.
That's some out of the box thinking with that long travel suspension, the way it was made is just incredible. Blows my mind away at how small my thinking is when it comes to fab compared to you guys.
Unfortunately for us on the east coast. Stuck rusted parts are a daily obstacle lol. You all have it lucky. Awesome cars and they last forever over there
The long awaited return of the Honda Odyssey series is here! Thanks for all the support guys! What do you guys think so far? Check out our new shirts and stickers here! www.grindhardplumbingco.com/
its the fucking bomb !!!! fallen in love with you guys and the projects, you got something to be proud. thx for the channel
Grind Hard Plumbing Co love your channel !! New subscriber here !!
You should think about putting the brakes back on it and hook them up to, one side only, cutting brakes. You can use park brake levers from a car as the handles. Just an idea. Keep up the great work.
Maybe add those back brakes back in there and throw in an emergency break. Just be safe guys the build looks awesome!
Grind Hard Plumbing Co
You guys are building some awesome stuff.
2:00 it’s super interesting to watch the hydraulics in the bobcat slowly fade and lower the car😂
Had to go back and watch, hahaha yup it drops a bit
I noticed that too, but I am an equipment operator so It's the kinds of things I watch for lol
I was watching the same thing
Lmao atleast i wasnt the only one.
That's actually a safety mechanism bobcats have built in so you have time to scream for help
The fact that you guys dont have 2mil+ subscribers is beyond me. Such an underrated channel with so many amazing builds, and somehow they all turn out great!
I'm sure they will get there before too long
@@SC-cb3vq without a doubt.
Rewatching this as im rebuilding my Honda Odyssey, they are huge now!!
Wow You know this is the TH-cam channel that you click the like before you watch the video
Thanks Miguel!!!
I did that
You should have clicked dislike
levi martin no
levi martin why
You guys are the absolute legends in the world of welding, fabrication and creativity. Keep on producing the best content on TH-cam!
I have been watching you guys for a couple years now, its amazing to see how far you both have come! Ethan's fab skills and techniques were great to watch years ago and are absolutely mesmerizing now! On top of the great things being built, the filming side has improved immensely as well! Sick b roll footage and music makes these videos flow amazing. I'm so grateful for a group of guys like yourselves, creating content and sharing your builds with everyone! Thank You GHPc!!
Oh baby. My favorite day - a new upload from GHP!
We are really trying to get up 2 videos a week now so maybe you have two favorite days of the week now?
Grind Hard Plumbing Co I hope so
It's like watching good ol' scrapheap challenge, but with properly cool projects, no (Discovery-)drama, no time window and more efficient.
Love it guys. I keep smacking that like button every single time.
Absolutely fantastic! I can't wait to see that thing done. Ethan is a really good fabricator. Not to mention he's designing his own stuff too.
Great job guys! Always impressed!
@ 1:50 I would not be under that especially considering you can see in the time lapse the hydraulics are fading. I would have rolled it on its side or lid. But all in all good video as always.
Ok so why the hell are they at 420k subs instead of 1million?
They might only be at 420k right now, but they are definitely going to blaze it to 1 million...
Epicbobo1 oh yeah
How many times have you shared any of their VJO’s?
Sharing means more will watch and potentially become new subscribers.
Because they are to stupid to tell they're audience what motor they put in the thing !
Wayne Crews I don’t know what sending a vjo is
Hey guys not the nit picky or anything but please when you pick anything up with the skid loader and you are underneath it please add some type of support one of my best friend's brother died because he was working underneath a skid loader and the bucket dropped and killed him instantly I just don't want to see anything happen to you guys I love watching your videos
Very much agreed. These guys are way too talented to go out like that.
Yep risking your life on a rubber hose it's kind of scary, if you've actually seen Hydraulics fail they don't fail slowly
They had the safety lock engaged. Look closely at the ram on the left and you can see it.
I mean, yeah. But did you see the mtv cribs: treehouse edition episode? The part where he climbs on the roof? Or when he goes rock climbing? People like this guy are consistantly aware of dangers in their surroundings. I'm sure he's familiar with his equipment and knows what to expect out of it.
I sincerely hope the guys take note of these comments.
I have been looking for a TH-cam channel like this for a long time. Loved the video. Plz make more
Will do for sure! Thanks for watching!
I absolutely LOVE what you guys are doing with the odyssey! I started a odyssey 350 build like 5 years ago with a sport bike engine and a-arm suspension up front and a custom swingarm in rear that pivoted with the engine, and built a custom roll cage. I never ended up finishing it since I bought a house and sold it to free up some funds. Again, awesome job!
Day = made. Thx GHPc !
You are too kind
I'm a Millwright in P.A., you guys are my idols..... if you heated that part with a torch you may have been able to sweat it off the spline..... maybe at least burnt the rust that created the mechanical weld...... please keep this great content coming! God bless!
this channel and cars and cameras is my absolute favorite on TH-cam
i cant get over how cool that ironworker is, that square shearing edge is freaking awesome
"Im sure there was a better way to get this apart." YES!!! HEAT!!!!
Actually, removing the drift pin was the best way. It's amongst the debris on the ground. Hilarious.
I could almost see a rooster tail on that donor bike with Ethan driving it and Edwin filming ,now that's quality. Also that pucker watching you guys work under that brat being held by a crusty bumper,, thrills and chills ,,, grind hard
Edwin’s video skills are next level. The quality of these just keeps blowing my mind. 🤯
You guys are a great partnership. Perfecting your craft in front of and behind the lens.
Power of rust gentlemen , thats what we deal with on the daily on the east coast . Cool builds , i enjoy the channel.
I really dont understand how u guys dont have more subs and some type of a used atv / offroad vehicle business sponsoring you guys with some free messed up jetskis/snowmobiles/atvs/dirtbikes I feel like for a used bike place it be a great channel to sponsor and just hook the boys up with bikes with messed up frames and watch them turn the motor into some insane banshee powered toilet or something lmao. But in all seriousness love the channel guys keep the great content up
You guys never cease to amaze me with how much progress you make in such a short time period!
Great video! I have been a subscriber for about a couple of weeks now, and I'm not regretting it! I hope that I can eventually be like you guys owning a bunch of awesome rides and fixing/customize the hell out of them. You guys seem to have a lot of fun, and I hope that I grow up and be like you guys. Keep up the great content!
I love how you can see the hydraulics on the skid bleeding out as the car slowly lowers as you take weight off!! Good clips guys keep up the good work!!
I have not decided on motor yet, but a mid engine, long travel, newest fl 350 in the works! You guys are awesome. We can do alot more. We would all work great together with an offroad team. Just because something has not been done, the best ideas are still to come!
The 31 people who disliked this video have no taste in quality entertainment, or a healthy interest in awesome fabrication! Y'all just ignore haters like that, and keep on keeping on!!
Amazing! Love how you guys do what you do. Don't change your builds or cinematography... its great.
Just built a go kart after watching your videos. The quality of these are insane.
Awesome we want to see it!
Love how you guys work with materials u have at hand and make them work..
Hell yeah now with the wider stance you can take corners way harder, it’s going to to be so much fun love the build.
I woke up this morning wishing that I would find a new video so I was very happy when one did Ethan you are a sick engineer I just love watching your guy's videos
You guys have one heck of a good channel here. My old best friend and I road circuit motocross and we were both machinists so we had some fantastic builds as well for back in our day. Keep up the great vids!
What did you build
@@ut.turner Built 3 gocarts, a couple swamp buggies, modified some trikes etc. We also made some huge cannons with hydraulic aim along with a few hand guns but the one that took the longest was our bus conversion from a 64 International. That one took a long time but we enjoyed the crap out of it on the circuit. We road Amateur circuit so we never made it to pro but that wasn't the point. The point was to have fun and we sure did that. We also got into modified stock car racing for a few years.
Brian Eckert that’s dope
Thanks guys, about half a dozen times on the modessey videos my comment was "long travel suspension" and now youse are on it!
Cheers. 😊👍
I have seen every video you have made and I love all of them
I'm not much of a safety Nancy, but man being under a car held up by a bobcat makes the hair on the back of my neck stand up. Watching it bleed down on the time lapse was extra cool. Don't try this at home boys and girls.
glad im not the only one wincing as it slowly came down
Bradley Weingartner chains break without warning. Use slings.
I couldnt watch it, every bad scenario jumped into my mind
amazing how talented you guys are with the builds and the film footage and that lathe just put you guys on a whole new level
Its so satisfying to see the hydraulic cutter in action, cutting through like fourteen gauge steel, so easily.
Lathe was a game changer tool addition guys! Glad you have it and the projects are looking good!
Dudes, the Oddyssey with ice studs on a frozen lake will be DOPE!
I really like your dedication and work ethic which really inspires me to work harder in life
I wish I was this mechanically inclined. Awesome work
Grind Hard Plumbing Co. is the type of you tube channel that you can find on both sides of the rainbow.
I found an east coast you tuber worthy of the Grind Hard Militia, Andrew Camarata, he's quite the inspiring independent soul.
I love andrews videos
Use hear to get if off. Torch works wonders . And rust/bolt removrr.
Watching you two work under the bobcat made me anxious lol. The potential energy there is a deadfall trap!
The odyssey is the build that I'm so interested in. Thanks so much!!
That lathe has taken your fab to a whole new level! Awesome
That iron worker machine is handy makes things so much faster and cleaner. I want one.
The power of oxide jacking at work on the cv spline, incredible.
Shaping up nicely can’t wait to see the other side on, going to need some work in the front.
Woohoo can't wait for this next step! I'm going to watch now and see how what your plan and execution is
Im glad u guys got a po box. Its always fun to see what people think their favorite youtuber needs. Sometimes its awesome cause its perfect and sometimes its awesome cause its sooo far off base its hilarious. But no matter what, its always awesome! CHEERS!🍻
You use your brain completely different then ordinary people and it’s awesome the stuff you guys come up with is incredible I’m hooked and hope you don’t mind me using some of your ideas cool projects keep them coming
I hit my “👍🏽” as soon as I touch the video to watch it!! I already know that if it’s you guys then it’s gonna be good.
by far the Odyssey is my favorite build for it was always something I wanted to do.... So glad to find your channel!.. I was like what is he doing with that single pipe... then when you added the other 2 and I was like .."That's Beautiful!" ..... You are the undisputed Mcgyver Award Winner... Can't wait to see this finished!... Keep up the Great Work!
That car is gonna be sick too!.... my second favorite build!.... :)
Loving the new music palette exercised on the past few videos. Great content as always, looking forward to all the crazy stuff already in the works, and to come!
Awesome build! One thing though, you've gotta adjust the center to center, or pretension on the drive belt. It looks like you're using Polaris P-85 primary and secondary clutches. The factory secondary, if it's a button, not a roller has an adjustable collar on it to help adjust the belt to clutch as it wears. Try turning it full min to full max. I don't remember if 1 or five is max, until the belt runs 1/16-1/8 above the top of the secondary clutch. It'll help taking off and not glaze belts as bad. If a new belt doesn't get you there you may have a wide belt clutch, and a narrow belt. Certain sleds. The XCR800 RMK 800 all used wide roller, wide belt. Most of the other sleds at the time used a narrow, narrow set up. It looks like you're running a toasted belt, or a narrow belt on a wide clutch set up. You can shim the primary if need be to match the secondary and get the belt to ride up just a hair above the secondary, or buy shorter belts if your current center to center is out a bit.
I’ve been dying for some odyssey content. Love you guy
Edits are great and how you go about explaining parts and things.. I have learned a lot. Keep it up TY
Man I love the stuff you do. I day dream about this stuff, knowing Ill never actually put the work in, and coming to your channel scratches the itch. Keep up the good work.
It's crazy to me that Ethan has basically built all the hotrods on this channel by himself. Damn dude you do work! And thanks edwin for documenting everything in such an entertaining way!
gratz on 420k subs! one of my favourite channels
Ofc these guys will make something that really shouldn't go to together... And they fabricate it together and make it look so good
Badass Odyssey build guys I remember haveing one when I was a kids
Those trailing arms are CLEAN! great job again boys
Set the diff in a tub of ice water and leave the spline you are trying to remove sticking out above the water. Take a torch and heat up the end of it to enlarge the female spline. It might pop off easier with that. I have seen things set by milling holes slightly smaller than they should be and heating them up for fitment. Once they cool back down to room temp, they are set unless you have a press or you heat it up again.
bro.. serious.. take care of yourself!!! you work as a beast bro!... respect!.. i hope you chill enough too..
One of my fav channels on yt always look forward to new videos
Y'all continue to break my heart with the BRAT.
How the hell do you guys do these projects this fast and put put videos so quickly, its awesome!
I absolutely love your content but more importantly your production value is fantastic. Keep up the great work guys!
Finding all sorts of uses for that new lathe, I see.
This is an underrated modification in terms of difficulty. All those degrees of freedom from the linkages, you gotta be precise or it won't be symmetrical and then the driving dynamics will be weird. Hope everything works out, but based on your track record for fabrication, I have tons of confidence that it will.
Your builds are absolutely incredible! I strive to be this innovative some day
I subed at 30k now your at 400K! Love the projects and the progress thanks
It was about the same for me. Only as couple years ago!
Never in my life have I needed something so much and not known it
Awesome work guys. I love watching what you come up with.
I dont where you learned so much about building all that stuff but its awsome I swear I wouldnt be suprised if I saw a video where you build something you could fly in outerspace.
This is by far my fav yt channel 😙😙
the best youtube channel ever
Favorite channel on TH-cam
Amazing Video!!!! Love The Trailing Arm. Ethan Cam Is Always Awesome!!! Keep It Up Guys.
Please save the Brad someday by doing a crazy project with that shell, keep it up you guys really enjoying the videos!
I have the feeling you guys are going blow up here soon.
I am building a custom shifter off road kart out of a baja blaster go kart. If you got any ideas let me know. I put polaris a arms in the front its going good so far. Keep the modesey going its my fav one on the show !!
That diff cup is exactly how every repair I've tried on my 2013 Outback has gone.. control arm bolts, wheel hubs, ball joints, they all might as well be welded in.
I honestly like the look of the brat wheels I think they would look sick on the odyssey with some really knobby tires👌
Cant wait to see the rear finished and front to match!
what some people see as a pile of junk, others see as a pile of infinite creative solutions. Love it.
Please tell me you drifted the roll pin out of the axle before trying to hammer it off...😂😂
I would think so but.....
my thoughts too lol
You can see the pin laying on the ground with the rest of the debris.
if the pin was out why not use heat and cold water?
Best content on youtube right here...
Best channel on YT, hands down.👍🏽👍🏽
He says sledgehammer, then proceeds to use a fire ax. I like it.
The rear stance is awesome!! Ofcourse you're going to have to widen the front to match the rear 😉
SLOWMO CHILL-HOP MONTAGE OF EPIC SENDYSSEY PROPORTIONS!!!!!!!!
Man the Modyssey is going to be sick.
That's some out of the box thinking with that long travel suspension, the way it was made is just incredible. Blows my mind away at how small my thinking is when it comes to fab compared to you guys.
Every time I see that Piranha, I want one! What a great machine to have.
Unfortunately for us on the east coast. Stuck rusted parts are a daily obstacle lol. You all have it lucky. Awesome cars and they last forever over there