3d Printing PETG For Beginners! Great For Functional Parts
ฝัง
- เผยแพร่เมื่อ 1 พ.ค. 2024
- Love the channel? Consider supporting me on Patreon:
www.patreon.com/user?u=806627
Join the official ModBotArmy discord server: / discord
Subscribe to the ModBotArmy TH-cam channel for weekly livestreams:
/ @modbotarmyy
In this video we take a look at how to to 3d print with PETG. We touch on the properties of PETG, why you may want to print with it and of course how to be successful when printing with it. PETG is a fantastic thermoplastic with a lot of great properties making it an excellent choice for functional prints.
SDS for PTFE:
www.uralchem.com/upload/ibloc...
High Quality Silicone Socks:
shop.levendigdsgn.com/
Retraction Test Model:
www.thingiverse.com/thing:909901
HACKADAY Article on PET vs PETG:
hackaday.com/2019/01/29/plast...
Recent Video On Filament Dryers:
• Tired Of Wet Filament?...
TDS For PLA:
cdn.shopify.com/s/files/1/054...
TDS For PETG:
cdn.shopify.com/s/files/1/054...
(´∀｀)♡ As an Amazon Associate I earn from qualifying purchases:
Buy now on Amazon: amzn.to/2jQAOgV
Subscribe To My 3d Printing Blog! :
Lets Get Social!
Facebook: / dopesoner930
Twitter: / dopesoner930
Instagram: / modbotarmy
Twitch: / dopesoner930
Music provided by Argofox:
NEREUS - Lotus
• NEREUS - Lotus [Argofo...
Super helpful! I recently had a complex PLA mechanism warp to the point of uselessness because I left it in a warm car, so I can't wait to get my Prusa and start printing again in PETG
I'm just getting started with FDM and specifically PTEG for a prototype. Thank you for a very comprehensive video. Very helpful tips and cautions.
Just the video I was looking for, I'm just starting to learn Petg, thank you. Great video, keep up the great work.
Ty for this vid! I am just now starting to do petg . What perfect timing !
Good video! With my PEI smooth plate I spray it down with windex first and have no issues with removal. I just let the plate cool completely before removing the print.
HA! Perfect timing,It's my first time today. Printing on the Anycubic Vyper. I did just change to a bimetal/all-metal heatbreak. After reading up on all-metal settings, I dialed it in and prints are looking good. 👍
i print petg on g10(garolite/fiberglass) it sticks down reallly well(you definately cannot take the print off) while hot and it self releases really nice when it cools down
Do you have a link?
@@MTNDEWGANG no, it is the g10 sheet that came with my printer, i just took off the crappy buildTak like sticker on it
@BuildGUY Glass is where it’s at boii
@BuildGUY I've used picture frame glass from goodwill for years. Its cheap and works well. Just got a new printer with fancy flexible magnetic bed coated with pei. I feel spoiled now! Its nice not having to get stuck prints off with a razor blade. Though glass gives the absolute best bottom finish!
@@GMCLabsI agree, but I use a glass mirror. Really flat and the darkened rear of the mirror really seems to transfer the heat really well.
This has been the best knowledge and we'll said video about PETG I'm just learning now about because I accidentally bought. Learning a lot from this video. Very well said thank you so very much. I follow this guy he speaks correctly when explaining
It's handy to have some qtips around to wipe the PETG off the nozzle. Heat it up to 230c and it will wipe off easily. You can heat up to around 120c and use a fine tip tweezer to pull the PETG globs off the nozzle before wiping.
I usually print at 230 - 240c with an 80c bed for the whole print with 25% fan speed with a dual 4010 blower setup and a microswiss clone from trianglelab. I find that dropping the bed temp down to 70c after the 3rd layer in a room with an ambient temperature of 65f will most likely lead to layer lifting from the bed. Drying the filament as mentioned is very important. Even if you leave it in an "airtight" box with desiccant over a few months, it will still exhibit blobs and layer adhesion issues. Probably best to store all unused rolls in a vacuum bag with dessicant.
Excellent video, lots of information for printing with PETG. Thanks!!!
Good vid, thanks! I am printing PETG on my third ever print, looking good thanks to your tips.
I've found that while printing with petg in recent times with an ender 5 plus that the filament "sticking" to the copper extruder only seems to occur when the temperature it prints at is too low. Additionally, I've found more success printing fine parts at a speed of 40mm/s than the stock 80 that the ender 5 plus uses.
I used to use PETG for almost everything, until I recently started using ABS. If you are printing a transparent PETG, there is something that you want to be aware of. PET & PETG will crystalize when they get too hot, or if they are heated for to long, thus you need to ensure that the filament is constantly moving. The glycol modifier in PETG slows this process a bit, but you still need to be wary of it. For your print, it means the difference between a cloudy print and a beautifully transparent print.
I saw that some people were having layer adhesion issues, which is most likely caused by, 1) Hot end is not hot enough, or 2) Bad or wet filament. Wet filament will also cloud transparent PETG filaments with microscopic steam explosions. PETG is extremely sticky, especially to itself (which is why it strings so well), so there should never be any layer adhesion issues.
all of theseare common sense
ASA is also worth considering. It is very similar to ABS, has same temperature resistance properties, but also warps less, emits less odor while printing and is UV resistant.
I agre with ozren asa has all the benefits of abs, just with slightly less fumes and is designed for outdoors in heat and with uv resistance.
As asa exists it makes me wonder about why abs is used at all..
Isn't it nice when a discussion about PETG turns into an inaccurate and incomplete discussion about ASA? AMAZING!
@@paulradford4100 good question.. is ABS more abundant, easier to obtain by recycling, and inexpensive or something?
Nice guide, one point I'd add from my experience, PETG tends to warp much more than PLA, especially when you print large surfaces on the bed (common with functional parts). I've found that printing under an enclosure solve this issue much better than using glue or toying around with temperatures and layer height.
I love your Videos. I know this is a long post but I think there is some good info. You cover all the issues I had to learn on my own. Suchas as the following. I print with PETG as my goto filament. I found 240c - 245c to be the sweet spot. I also found that PETG either sticks to the bet to well of net enough. I found that if you dial in the bed temp precisely than I can get PETG to stick. And I can remove it with out damage to my build service. I found around 60c worked for me. Although I can remove PETG without damage I can just pop the parts off the flex plate by bending it. Some times I can gently twist the part off; sometimes I have to pry the part off. Adjusting the Temp (+-) 1 to 2 degrees c makes a big difference. I have uses Buldtack sheet. I now use Garolite. I think Garolite would well and it is sandal. so if Alcohol does clear the sheet then you can lightly sand it. I found that a Glass bed but does not get hot enough. On my two printer the Heaqted Bed is low by at least 20-40c. I just tried placing my Aluminum BuildTak spring sheet with Garolite top sheet directly on the Ender 3 Max Aluminum Bed. Aluminum to Aluminum. And the Temp is off only about (+-) 5c. Of course as with any Heated bed the outer sides of the bed are not going to get as hot as the Center where the actual Heater is located. I found that if a print fails and I only printed 1 or 2 layers then it is very hard to get PETG off. PETG need at least a few layers for it to be easier to remove. Lastly, I found that finding a good Manufacture of PETG is very important. I want PETG to really flow well. A lot of PETG filament just will not nelt well and there fore will partially clog my print head. Enough to have the filament under extrude a lot. I would rather deal with stringing. I found that trying to up the temperature on PETG to get it to melt better just does not help. I used to use Amazon BASIC PETG a few years ago then Amazon discontinued it. BUMMER!! that filament melted really well. I now use MatterHacker MH Build Series PETG. That would pretty well but not as good as the Amazon BASIC PETG. Also, I printed with eSUN Translucent Orange which worked pretty well on my TEVO TORNADO with an E3D Gold Edition hot end. Neither of the above filaments work well on my Ender 3 Max with a Microswiss hot end. But I think I have other issues with the Ender Printer.
Your video is very informative and right to the point !!
I really hope you have a whole series on all the different material types just like this video. This was great
I just bought a printer first time user I plan on using PETG only you are most helpful
Great Video! Thank you so much for all the Great tips and tricks
Great job, thanks for posting.
This video is so well-timed for me. I've been printing with Inland PLA+ forever and decided to try PETG; bought some yesterday at Micro Center. Wish me luck
Pay attention to temperature and bed sheet, also, run a cold pull, or make sure your nozzle is not clogged.
Dang we’re the same, currently use inland pla+ and going tomorrow to buy petg
@@johnnycastor8634 pla+ is amazing and ive never had any issues. the PETG is definitely more challenging to print properly but i've gotten a couple nice things out of it (like a new fan shroud for the hot end)
I've been printing some nice translucent PETG, no issues at all. Well, other than one spool where the filament got criss-crossed a la Nero since I'm an idiot, but that was on me! It is a "weepier" material, but I found the sweet spot for my stuff at 230C. It also helps if your extrusion is really dialed in well, that's important. Do your wall tests, measure with calipers, etc.
I mostly print in PETG and didn't know about the nickel plated nozzle idea. Thanks!
I definitely had issues with PETG being attracted to copper and its tendency to curl back onto the nozzle. A steel nozzle fixes that issue completely. For me, this was the cause of a major hot blob in one of my early overnight prints and was always causing minor first layer adhesion issues. But ever since moving away from copper/brass things have been perfect.
I have just got a roll of petg. Ive had a steel nozzle for some time and never needed it. If i have issues i will try that. Thanks for the info ✌💚🌞
No Nickel plated nozzle is probably exactly what has been my problem. Thanks for mentioning it.
By coincidence, I have my very first spool of PETG arriving today. I thought it was time to expand beyond PLA, so this video was very timely. Thank you for it. 👍
I have ordered my first spool and I'm nervous but also excited to try something new. Still a Newbie only had my Ender 3 v3 se for a month and a half.
@@hippysplace - I had no trouble printing with it. I was worried for nothing. You probably are as well. Although my X1C maintains a warm chamber temp within the enclosure, if that makes any difference.
@@davidsh331x my spool won't be here till next week. but its good to hear you had no problems
Thanks for the very informative video. I am new to the 3D printing and found your video worth subscribing. 😊
Great video and informations. Thank you.
Excellent info. I really wanted to like PETG for my functional parts but ended up hating it. That stringing, argh. However, I've recently upgraded my two printers to dual gear so I might give PETG another try. Thanks!
Great video. I dont use the part cooling fan except for overhangs.
I am using PETG as I like to make more functional things. I can confirm that with Prusa, it is just no problem at all. I have Mini+, using Gembird material and printing with generic PETG profile from the slicer.
I did it! Thanks dude :)
Cant wait for you to run an X1 carbon and give some setup instruction and use tips etc. Love your work
LOL, this would have been a good video for me 4 months ago! I bought a used Anycubic Mega Pro and without research bought some PETG filament! OMG what a freakin nightmare to get figured out with no prior knowledge of 3D printing! That being said... I finally figured it out and did some successful prints and then made a dehumidifier box and subsequently purchased some Silk PLA. I have since switched back and forth between filament types and have had success with all of them along with some failures! Good video!
I run my plate at 85 (for Prusament, even 90) and that has worked out very well for me. Sticks down very well, releases easily. Perhaps that 70 degree setting contributed to the warping... this material does like warmth. :p
I am also at 90 on bare aluminum, with a dissolved hairspray coating.
Thank you great vid, top man👍
I love printing with petg. I'm using a flashforge creator pro 2, at 235c and a bed temp of 70c. This has been working really well for me. Also printing at a slower speed, and leaving the cooling off for the first couple of layers. At 240c I had some issues, but after some tweaking and dialing back the hot end temp they have been flawless. Thanks for the info. Cheers.
How slow would you print for PETG?
Printing with PETG on the Ender5 stock works but not without headaches and some of these suggestions don't work at all. My materials ooze too much above 235C, I always have to use either brim or outright raft to have any sort of hope it adheres to the bed. I tried stick glue and CubeGlue (for 3d printing). Stick glue works about half way, cube glue works better, but all result in very hard to remove prints, so I tape the bed first.
On a rough bur flexible addon bed surface the first layer adheres better but each line has problems adhering to the next one so I use rafts.
Thanks for the info, good starting point :-)
Thank you for this. My mk2s is 6 years old and the parts are brittle. So now I'm printing my second time with PETG and trying to find the best settings. Imma try what you suggested. I too and using the prusa slicer. I have ESUN PETG just opened (but about same age as printer) and I'm using the prusament PETG filament settings to start before I modified everything per your video. - John
Started out with PETG, tried a tiny bit of PLA now I am printing mainly with ASA. Using a Qidi i-mates since last September.
My favorite filament to print with by far
I was very curious about the vacuum device and the storage bag. Could you give any tips on where to find them to buy? Thank you very much and congratulations for the always excellent content!
very interesting video :D thanks!
I really should move to PETG from the usual PLA for "mechanical" parts
I much prefer to print PETG. I started out printing it, because I needed functional parts. A Prusa i3 with the textured plate, Prusaslicer and a decent PETG roll (Prusament, but I've had luck with other brands as well) and you get great parts. It's even more quiet than printing PLA because the fans don't have to run at a gazillion rpm to cool it. PETG rocks. The textured plate from Prusa is so good for htis too, scrub with 99% isopropyl, print, let it sit and cool; as the print plate cools and shrinks, the part gives up some ticking noises and when the plate is cool, you can basically just lift the part off. A great experience all round on a stock Prusa.
One other thing I can confirm, sock or no, PETG DOES PENETRATE BENEATH the sock, I've found that having my sock off rather than on is a bonus as I am able to clean off the heater block and nozzle, I've just recalibrated my PID settings. I use and have been using a 50-50 mix of wood glue and water (Glass Build Plate), I have tried a lot of different products to use for bed adhesion / release all have worked or not, but the wood glue water mix has come in the most cost effective than any of the others. Not only that, but it is water soluble and once done just washes right off. Thanks for the good content and insight.
I consider myself a novice printer, I've converted over to PETG from PLA. I print on a metal plate, and I use a standard school glue stick as an adhesive. I use generic PETG filament, and print it at 235°C - 240°C, with the bed staying at 100°C with relative ease.
I've been printing for about a year and a half. My second type of filament was actually ASA, and it's still my second most common after PLA. For when I need heat-resistance and/or weather-resistance. PETG strikes me as a half-measure. I almost only ever use it when I want something transparent, as I rarely need improved impact-resistance. Similar goes for TPU. On that note, I've been meaning to try printing HIPS. Not for high impact, but for minis. I've been avoiding ABS like the plague, but given how vehemently the Voron team advises to use it for their machines, I guess I'll have to take the plunge later this year. PC and PA are on my bucket list, but I haven't had a need yet, thus yet to buy.
PC is hard to print in my experience, lots of warping and very high adhesion. Good luck!
Thanks!
Great video! I've been really liking the results of some Polylite Petg and Hatchbox Petg that I've been printing with
Interesting bit about the hot end. I started printing petg as my first filament even before pla, i have printed a ton of petg car parts with stock ender 3, i always ran the nozzle at 235°C. I have never had a problem with the bowden melting but i might have just gotten lucky. I didnt know it could produce toxic fumes.
I think the toxic fumes was about the PTFE-tube inside the Nozzle-thingy, if that would get over 250°C .. PETG itself is as far as I know not toxic??
I basically never use PLA. I jumped right into PETG on my Prusa MINI and it's been amazing. I'm working on upgrading to an enclosure so I can do ASA next :D
I print almost exclusively in PETG on my Anycubic I3Mega with V5 all metal hotend. I always print with a brim and sometimes even a raft because my biggest problem with PETG has always been poor bed adhesion. Anycubic uses their proprietary “ultra base” and it works great for PLA but I’ve had trouble with PETG. I use a nozzle temp of 240, any higher and the prints seem to melt at small finer points even with my cooling fan running. Bed temps are usually at 70, any higher and the painters tape I often use will pull from the bed when the print warps. I even use glue stick sometimes with prints that have a lot of surface area on the print surface to keep the PETG from permanently bonding to the tape. It’s a pain to remove when this happens. I love the material for my typical application (functional motorcycle parts) but I do not love it’s printing properties.
I found a trick for adhesion randomly online and it is to use very salty water and lightly wipe it on the print surface after it is heated and it fixed my adhesion issue along with a brim.
Thanks for your video. I've just ordered Prusa mk3s instead of my FlashForge Adventurer 3, because it supports more than PLA and ABS. I'm gonna think 5 times before I buy PETG because it's problems with moisture. And I was shocked when you showed vacuum package for PETG spool. Not convenient material... I want to find something also cheap like PLA but more heat resistant than PLA. Probably in my dreams... 😞
I'm new and went right to PETG but over a month of frustration had me putting it away until I get a dryer. That's the only thing I haven't ruled out.
I have printed probably 50lbs of petg in the last couple months . All metal hot end with direct drive helps. Also glass build plate with layerneer bedweld The parts pop off when it cools. I used school glue ect before and it’s just more work.
great Vid. just wondering about the print surface you mention I have a ender 3S1 it mentioned PC coating? is that one of the bad ones I need to watch? sorry for stupid question I normally use PLA + and have been looking at PetG for a bait board for my boat.
After finally getting my Prusa textured plate to actually stick to Petg, I haven’t looked at pla since. I’ve found that the Prusament PETG setting works best for non-Prusa filament. I also use glue stick, but only to “season” the plate by drawing the stick around the edges and a big X from corner to corner. Then I coat the bed in IPA, then with paper towel, rub the glue/ipa into a very thin slurry and let it dry. This usually lasts me weeks and I’ve had perfect first layers that cover the entire bed. PETG just feels better to the touch and I have high confidence in the durability to my parts.
I've had difficulties with PETG sticking to the textured bed of my Mk3s+. I'll try your suggestion. Thank you!!
@@larrydelceg2406, another tip, choose the Prusament PETG profile for all PETG. It prints a bit hotter and I’ve had great luck with non-Prusament filaments.
I was having so many problems with petg out of nowhere like it worked well for a while then just wouldn't retract right and the parts were just so messy. Finally I dried it for like 10 hours and it printed FLAWLESSLY like I couldn't believe how perfect it came out. I didn't think moisture was the problem because it happened with a new roll, but I realized they were shipping them with moisture in them. So even the stuff you get new, I recommend drying it for at least 5 or 6 hours, or 10+ if you really want to play it safe.
thanks.. I need to fix a baby tray table and have been thinking about trying to use PETG...
Bout to unbox my first ever 3D printer. It’s a Prusa MK4 and I’m very excited. Could use all the newbie tips do’s and don’ts 🤣Would appreciate it very much..
First thing anyone should do, especially with a new roll of filament, is to not only dehydrate for a couple of hours, but print a temp tower. This will help you immensely with any filament. I do this religiously and haven't had a failed print in a while now. Also, you need to do some fast prints to see about stringing. The just adjust your retraction distance first, if tha helps some but not a lot, adjust your retraction speed.
I’ve been messing around with it for the last couple weeks and I’ve got some really interesting results regarding temperature and translucency relationships. It seems the higher the temp, the more “glossy” the surface becomes. I’m not completely sure, but my thought is that the glycol really “shines” at higher the higher temps. This also confirmed when I print with the Amolen color translucent filament. At around 230c I can get an opaque haze through the layers, but around +245-250c the finish really becomes almost as glass. But along with that, they do seem to become more brittle as well, losing some of that sweet glycol ductility. 🤷🏼♂️
Any plastics engineers in here?
Great Vid!
I found that stringing is greatly reduced at 230 deg C. And I have also best results at 60mm/s speed. But it does weird stuff when you need to support it. Still have to figure that out.
I've been 3D printing since there were no consumer/hobbyist machines and the only way to 3D print was to build your own 3D printer, but I'm very late to PETG. I just tried my first PETG print. It would have worked very well in PLA or TPU but the first layer failed when the print was around 5 mm tall. I was printing on a new PEI sheet with excellent bed leveling and Z offset. I guess I'll try a glue stick (meh) and a brim. Or maybe I'll reslice the part for PLA.
if you are getting plastic on the walls of the plastic its due to either the nozzle is scraping the previous layer or retractions that cause strings to build up on the nozzle walls. both is easy to fix on these direct drive extruders.
the "barrier" is called a release agent ;)
Not happy with my PETG printing. Much better when in dehydrator over nite at 140F. I had lots of problems with infill stringing. Also problems with printing parts with fine detail like unrecognizable small raised letters. I used 235/80 with low print speeds (50/20mm). Printed same part in PLA+ with excellent results. Today I do my first ABS and doing same part for comparison. Your videos are very valuable to me. Thank you for sharing, Doug
Great vid mate. Everything I need to know to make me realise I'm doing everything wrong! Haha.
I find if your having stringing issues with petg make the retraction speed quick but it doesn’t have to be far it seems to almost snap instead of string, works for me Atleast
The main food safe usage I have of FDM PETG prints is shot glasses 😁
You hit a couple of points that are critical. Dry filament is a must, higher temps tend to work better and your print surface should have a coating to keep it from pulling off when the print is removed. I use glass and have had many chunks come off with the print.
it pulled chunks of glass off?? wow
Brims are typically excessive and unnecessary because they surround the entire model, yet it's usually only corners or small footprint sections that lift.
If you add "mouse ears" to the areas prone to lifting before you slice, it will help with adhesion. It will also save time and filament during the print, and reduce cleanup time after the print. -Compared to a full brim.
Cura 4.13 has a plugin called anti-warp tabs (I think) that does exactly what you want. That plugin hasn't been released for 5.0, yet.
Hi great videos
Ive been using PETG for a few years , and now trying it on a modix big 60 with a 1.0mm nozzle, omg what a pain
Any settings ideas
Thanks dean
PETG Overature or Tpomins(?) I think thats how you spell it. Ender 5 pro, temp 230-235, bed 75-80, Hictop PEI rough mag bed, dryer box...works pretty good. I did however change the board and it threw everything out of whack. working on recalibrating currenly.
To the point.. subscribed! :)
Of course I started my 3d printing using pla as many do/have, but to be honest I don't really like pla that much for being more brittle and temperature sensitive. Because of this I have mostly moved away from pla to petg, only using pla for show models (which I don't do much of) or prototyping. Even then I wonder if it's worth it as I'm already set for petg..
Setting up settings for petg is a little more complicated than for pla and is a little of a learning curve, but once settings are turned petg is actually quite easy to work with - even without an enclosure. Settings do have to be tuned though if you want good prints.. Also, less is more with petg as far as fans go and certainly would not go above 50% - lower fan speeds give much better layer adhesion..
As for print speed I tend to run at slightly lower speed all the time (not just because I have direct drive), I find printing at lower speeds give much better quality. As mentioned, I do have direct drive and would recommend this for petg for retractions, though it's not 100% necessary.
I do recommend using all metal hotend and especially the Micro Swiss on ender 3 type machines. I recommend this for all filament types including pla. Removing the bowden from the hotend is only a good thing as far as health is concerned.
Flex - such as tpu uses similar bed nozzle clearance as petg and was my second filament before petg. Again though not 100% necessary direct drive is handy for flex, moreso than petg purely because of the flex.
As for outdoors stuff I would say either petg or asa. Asa being slightly better for things that will be in sunlight. While you.may get away with it, asa really needs an enclosure as abs.
In this day and age, with all the materials giving performance, I would actually advise against abs - I just don't see much point in it other than practicing you gas mask skills..
My petg manuf roll recommends 235 to 255C. I lay down a raft at 255C to stick the piece and the fan off which sticks to the glass mirror bed very well. But when I print I did a temperature tower. Eventually I found 215 to 220C prints best (and strongest) but I find small parts are melting from the hot head being near it while they are being printed. My bed is 65C which works very well. I am not sure what to do as 70% fan speed appears too slow now for the 220C head temp as it is melting the small parts. Going slower seems to definitely "hurt" for petg but what I most do faster is still a mystery to me. The petg seems to like being extruded slower but must not remain hot on the workpiece.
My temp towers were 265 down to 235 initially but I redid them from 235 down to 210. The printed better at lower temps but I still needed at least 255C to stick to my glass mirror bed. Once it cools down the raft sometimes remains and the workpiece pops off first. The raft seems to only stop adhering below 30C.
I have lifting on the corners of just about every PETG print (several different brands) on my Ender 3 Pro printer. I've tried adjusting nozzle and bed temperatures, varied fan speed from 0 to 100%, varied print speed, and adjusted other slicer (Cura) settings to no avail. This happens regardless of print surface (i.e., the Creality stock buildTag, glass with coating, smooth PEI). The first layer goes down without problems, but by the time the print's done, warping always happens and the corners lift. Using a brim (or brim on the corners using the Cura TabAntiWarping plugin) helps, but I've had prints where part of the brim lifted off slightly with the print at the corners. Parts of the print other than the corners stick to the build surface very well.
Since this is happening all the time, something obvious may be causing this, but I'm just not seeing it. Do you have any suggestions of what else to try?
Haven't tried nearly as many things as you, but same experience. I will try no fan on first 3 layers as recommended here, but so far every single PETG part has warped slightly on the bottom, about 1mm up for about 3cm along the bed.
Great walkthrough
Thanks of sharing your experiences with all of us :-)
Good thoughts.
Great video guiding to print PETG, I have one confusions on the hotend part, PTFE tubed hotend cannot stand the high temperature and release toxic, however, the non tubed full metal hotend, the filament company said PETG is not recommended to print with full metal hotend as it will clog the hotend, so, what is the better solution of it? Or as a occasional PETG printer, just use lower end temperature as you mention like 230 with tubed hotend? Thank you in advance.
If you adjust your temperature on the smooth pei you can still print petg well. Though maybe I'm spoiled using the PEX plate from Wham Bam.
I always print my work on a raft first, small amount of waste but you get a sharp base and no warping
Funny thing is, the 1st roll of petg i had, pissed me off so much I jumped to PC,nylon, and my favorite CF-nylon. With PETG my print would get halfway done and the nozzle would just clog up. Recently I got a new printer and decided to give petg another chance and got a few new rolls. Much better now, i must have got a bunk roll the 1st time. Still when I need something tuff as nails, I go with carbonx cf-pa, though I really like Priline and esun cf-pa a little better for its surface finish plus the filiment is alot less brittle than carbon x.
thanks
I have had trouble with overhangs warping upward with petg. It seems to stay soft longer than nGen. Its flexibility causes problems with tall skinny parts flopping around as it prints. In spite of being much more flexible, it seems to be just as brittle as nGen.
I dry my PETG rolls using an old Amazon Cardbord box ontop of my heatbed, heating to 50deg C, small vents on bottom and top to get fresh air in that can heat up and dry.
Am planning on printing with PETG on my Aquila X2 which I upgraded to Capricorn tubing and fan upgrades, also have steel heat treated extruder nozzles but considering upgrading extruder to a Swiss one. Any thoughts on the Micro Swiss.
Would you recommend a 3D printer coming with an enclosure like the Ender-6 or instead make an DIY enclosure and focus on another 3D printer not coming with enclosure? Print volume of at least 250x250x400mm is needed. Carbon filled PETG and ASA will be printed for functional parts, thus needing full metal hot end and a wear nozzle.
I print with PETG a lot and it’s always flawless on my Prusa mk3s. I’ve printed about 10kg of it over a couple of months and it’s been a breeze.
Can I ask what brand u use?
very usefull, thanks!
just a question, i'm pretty new to the 3d print world and i bought a ender 3 pro a month ago
in this video you say that ender 3 doesn't have a full metal hot end
but ender 3 pro have?
0:22 My second material is TPU. It seems to have the advantages of impact resistance and toughness but can be printed at lower temperatures than PETG with a stock hotend with a PTFE tube. So far I have been happy with PLA and TPU. Don't know why I'd move to PETG.
Another good tip is if you have a bed leveler to slap a glass plate down on top your normal printing surface, put some stick glue down and print away!
I'm kind of struggling with adhesion to my glass plate. What's the overall mindset with temps and adhesion? How liquid do I want the material to remain once deposited on the bed and for how long? Do I want it to be deposited in an extremely liquid state and slowly cooled to the bed temp, or do I want it to cool quickly? Do I want the bed temp to be as close to the print temp as possible. If my bed is at 70, and I'm not getting good adhesion, do I want to raise or lower the printing temp?
I have a flash forge adventure 4 . I use the .6 mm dia nozzle , 80 c bed temp and no skirt or brim. The issu3 is stringing and blobs that occur randomly . This has a Bowden tube so I was wondering it retraction settings should be longer and faster . The 5 mm length and speed at 50 is not working
thank you so much. im trying to print a mould then melt coke plastic caps to create little keytags. you have any advise for me?
What is your opinion of Capricorn bowden tube for PETG? I believe it is rated for higher temperature resistance
What was that blender looking machine you put the filament in and where to purchased??
Thanks you so much!?!
I have a ender 3 v2 I have printed a couple off vases with Pete but now I’ve fitted a metal extruder works great with pla but when I use petg part way through print is slips on filament & broken filament I’ve tried slowing it down & adjusting tension on extruder nozzle temperature 250 & bed temperature 80
Any information would be helpful thank you
I bought my 3D printer for its purpose. Rapid prototiping for injecton molding. I have know that my finale ptoduct will be PTGE so it was only logucal to use PTGE for prototiping. To this day I have only used PTGE for printing