1/48 Airfix P-51 Mustang Build
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Here's a full build video of Airfix's outstanding 1/48 P-51D Mustang, "Little Indian". In the video, I illustrate some simple techniques to take the model to the next level.
#p-51mustang #48airfixp-51 #p-51model
Make sure to follow me online @
★www.flyingsmode...
★ / flyingsmodels
Thank you for your continued support to the channel and I hope that you are finding all the episodes informative and helpful.
Keep the comments and feedback coming as they help me adjust the content of the channel to better meet your needs as well as help to make me a better modeler!
If you are interested in seeing some of the building products used in this video or that are currently on my bench, you can check them out at the links below:
1/48 Airfix P-51 kit: amzn.to/386aiJl
AK Extreme Metal Paint: amzn.to/2LcxfRY
Dymo Tape: amzn.to/2Is1t28
Oil Paints: amzn.to/3gkn4pp
White Spirits: amzn.to/3456iHk
Brushes: amzn.to/3iGW4kz
Silhouette Cameo Portrait: amzn.to/3cwmaUO
Tamiya Cement: amzn.to/3ghZWbk
CA glue: amzn.to/2Mn67x1
Solder Wire: amzn.to/2AzclXM
Pewter foil: amzn.to/39XpxWg
Dental Resin Powder: amzn.to/2BSEz0o
Tamiya Fine Putty: amzn.to/36turX3
Tamiya Tape: amzn.to/2WZbxED
Solder Wire: amzn.to/2Yr5tEj
Airbrush: amzn.to/36tu5zH
Compressor: amzn.to/2A4vkt8
Tamiya Paints: amzn.to/3aZ11of
Tamiya Thinner: amzn.to/3cUxOZE
Vallejo Paints: amzn.to/2X2gVWD
AK Gauzy: amzn.to/3dr4Lxf
AK Thinner: amzn.to/302UXFU
Mineral Spirits: amzn.to/2yu67bf
Tamiya Fine Putty: amzn.to/36turX3
Sanding Pads: amzn.to/3c5io3K
Copper Wire: amzn.to/3eGLPL2
Razor Blade: amzn.to/3d0OkqW
Olfa Circle Cutter: amzn.to/2Avly3V
Evergreen Styrene: amzn.to/2B4zJN2
Micro Drill: amzn.to/2Zw1Rmx
Straight Pins: amzn.to/3bVmlb7
The Camera I use to shoot the video: amzn.to/3bXlMxl
My favorite effect was the weathered anti-glare panel on the nose. Opinions vary on Airfix, but I give them a thumbs up. Their range of subjects is enormous and their quality has zeroed in on that sweet spot where the same affordable kit can appeal to a beginner as much as a master builder. THAT is the magic of today's Airfix.
Thanks for the good words. I totally agree with your assessment of Airfix. I think they have found the sweet spot and that's a great thing!
The one model channel thats actually fun to watch and is straight to the point. These don't just help me anymore. I LOVE TO WATCH THEM!
Thank you. I really appreciate those words and I'm glad that you are enjoying them. Last thing I would want is to make videos that were putting people to sleep...haha. Glad they are helpful too. Thank you again, Chad.
You Nailed that. Excellent work throughout.
Thank you for that kind feedback. Was a really enjoyable build.
Great video and your narration was excellent!
Attempting to get back into the hobby after being out for decades (late 80s-early 90s???). Videos like yours are so helpful!
Really appreciate the feedback. Welcome back to the hobby and enjoy. Lots has changed since the 80's/90's...for the good.
That cockpit inspired me to try MUCH harder on my next build, excellent
Excellent! I'm glad that you found a little inspiration in the video. That's what I'm hoping for! All the best on your next build!
Interesting to see weathering before decals.
I never like the result I get by doing all weathering over the decals. So I like to do some before and a little afterward.
Absolutley Beautiful !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thank you. Appreciate the kind words. Was a fun build!
Superb build, and really informative video, thank you.
Thanks for the good feedback! Really glad that you found it informative.
Please continue making videos, I've learned a lot from you. Thanks.
Thank you. I sure will. Life just got in the way the last few months. Appreciate the feedback and Happy New Year!!
Just finished this kit. Excellent kit! Am currently doing my first Eduard P-51D block 5. Superb kit. Having said that, I am even more impressed with the Airfix! What you get for the buck is amazing!!
Totally agree. The Eduard kit has a good bit more finesse but it's hard to beat the bang for the buck in the Airfix Mustang. Thank you for the feedback.
Such a great production and build! Thank you!…my pops just passed and this was his favorite plane! When I was a kid we used to build kits together back in the 70s…. I am 52 now it’s been over 44 years since I built one but because of your video I am going to purchase everything you linked and build it in memory of him🙏☺️
I really appreciate that feedback and it is encouraging to hear that the build/video has reignited your desire to get back into modeling. It is such a great way to connect to the past and the good memories of time with your father. Let me know if you need anything as you get back into the hobby. Always happy to help. -Chad
A fabulous build. I have subscribed to your channel right away!
Thank you for the sub and the kind words on the build. Hope you enjoy the rest of the content on the channel. Appreciate it!
loved the build and the video, fantasic work. Keep it up.
Thank you for the good feedback. Glad you enjoyed it.
Beautiful build. This channel is fast becoming one of my favourites. Looking forward to more content!.
Really appreciate that. Already working on the next one!
Wow you are a modeling genius...museum quality.
Thanks for the good feedback. Most of the credit goes the kit for being easy to assemble.
Great build. Just ordered mine.
Excellent! You will enjoy it, I'm sure. Appreciate the feedback!
@@FlyingSModels btw i have tamyia xf 16 for the main body od the aircraft, would that be the goid shade?
@@jantimmer5558 I would go with a different finish but that's just me. I find XF-16 to be a bit grainy. I really like the AK Extreme Metal line myself.
I really enjoyed the build and video great channel thanks for sharing 😀
Thank you. I appreciate you taking the time to provide the feedback.
airfix has definitely been putting out really good kits the last few years
Totally agree. Change the plastic formulation a little and would be that much better :)
Good video, thank you, I buy lots of models at hobby lobby because my local hobby store is too expensive!
I appreciate the kind words and feedback. I'm hearing hobby lobby is going to stop their 40% off coupon so that may stop me from going there in the future for discounted kits.
@@FlyingSModels thanks for the heads up!
@@edstud1 Anytime!!
Superb build. No music, thank Heaven. VERY informative, and subbed. One of the best, if not the best, Mustang builds I have seen. Congrats.
Really appreciate your good words and taking the time to provide them. I'm going to have to make sure I never put a music overlay in the video again...haha. It's more of a pain and in the end, causes more hassles so glad that viewers don't like it anyway.
Simply amazing, I too am becoming a big fan of airfix! Keep the amazing vids coming.
Appreciate that. They are making some really nice kits. We just need them to change their plastic now :)
Great build! I have one of their other Mustangs and it turned really nice. Let me ask you- what is the second plane you show at the begining? Thanks!
@@briancooke2546 Thanks! The Mustang is a really great kit. That second plane is the little 1/72 Airfix A-4B/Q. It is also a nice one.
@@FlyingSModels thanks so much! Thanks for sharing with us.
You bet, Brian. Happy to do it and hope the videos are helpful and not too boring :)
Fantastic skill!
Thank you for the kind feedback!
I started the Airfix DH3 Vampire. It is a beautiful kit to build. Santa gave me a nice 1/48 scale Airfix Mk I Hurricane. Both are on par with the great Mustang kit in this post.
That's great. Airfix has really stepped up their game. I'm about to start on their Gannet and it looks superb. I need to get the Vampire still. Enjoy your builds!
Wow , you really knocked that one out of the park!
Thanks, Dan! Appreciate the compliment.
This is a fantastic Mustang build, it’s great to see a positive build of a modern Airfix kit, instead of builders rubbishing a kit because it was produced by Airfix. I really enjoy your channel and the builds your producing, keep up the great work👍👍
Thanks for the kind words. It does seem that we modelers have gotten a bit spoiled and always find small things to bash about kits. It's not that I disagree with folks as sometimes manufactures do get "lazy" but hey, they are trying to make money and can't spend all their time pursuing perfection. I find that most modelers who spend more time nit picking spend less time building. I just try to focus on the positives and being grateful that manufacturers put in some effort to keep the model kits flowing. Happy New Year!
@@FlyingSModels A Very Happy New Year to you too, I look forward to seeing your next build, which ever kit manufacture you choose to go with👍👍
@@KitchenTableModeller Haha...Thanks for that :)
Model making magic... putting real fun and total enthusiasm back into what is at the core of our hobby... and showing a few of those nit - picking rivet counters how to maximise the enjoyment and satisfaction of what its all about! Bravo :)
Great job !
Thank you!
My friend got me this kit for Christmas, so watching this made me pumped! I am making a stop to get some more paints, but besides that I’ve got everything you’ve got! Super excited!
Excellent! I'm sure yours will be even better. Would love to see some pics if you feel like sharing over on my facebook page: facebook/flyingSmodels. Have fun with it!
I just finished this kit. I had a great time putting it together and painting/weathering it. I referred to this video quite often to help me through some question marks. I started building Hasegawa's 1/32 F6F-3/5 Hellcat today. That kit is a big step up for me as it includes detailed gun bay and engine.
Excellent, David. Hopefully you'll share some pics over on my facebook page: facebook/flyingSmodels or you can contact me through the contact feature at: www.flyingSmodels.square.site. Look forward to hearing more about that Hellcat. I know it will be a great project!
WTF the detail on the instrument panel is insane! Well done sir!
Appreciate that! Just a little detail painting and some epoxy is all it takes.....and a good magnifying visor, of course...haha.
2-words, "OUTSTANDING"...
Appreciate that endorsement! Most of the credit goes to Airfix for making such a nice little kit (despite what the haters say...haha).
That’s an incredible finish you got on that.
Thank you, David. I really appreciate the good comments.
Just wanted to say THANK YOU. Your videos have taught me several techniques...its truly appreciated. Thanks for sharing your talent...your content is amongst the best on the web.
Have you considered doing any of the older Revell kits from our younger days? Raised panel lines, flash, putty...you name it! Fun to re-do these old school kits...i find myself really enjoying them again.
Hey Joe, appreciate the feedback and you are more than welcome. I'm glad to hear that the videos have helped in some small way. I thank you for your kind words on my builds. I, like you, really enjoy some of the oldies. You may have seen these but I did a few a little while back and look forward to more in the future. Here are a couple of links: th-cam.com/video/J5RtMJOX6tU/w-d-xo.html and th-cam.com/video/kna1oak6wls/w-d-xo.html
Well explained nicely done build video.
Appreciate the good feedback!
Another great build. I can say I learn a little every time I watch your videos.
Thank you. I'm glad that the videos continue to be useful.
Wow!! I'd never would have guessed it was the Airfix kit and not the Eduard version. Awesome build. Looking forward to more of your fantastic builds in 2021. Cheers! 👍
Thank you, Michael. I appreciate the feedback and look forward to sharing more builds in 2021. I was just as surprised as you when I opened the kit and saw the overall quality and engineering. It reminded me more of Eduard and less of Tamiya and all for about $18. Hard to beat!
Truly a master. Gorgeous build. Thanks for sharing.
Appreciate the kind words on the build. Most of the credit goes to Airfix for making such a nice little kit at such a great price. Cheers!
Just found your channel and it's now my favourite modelling site! I hope to see more from you soon!
Appreciate that, Michael. I'm glad you like the videos. Already working on the next ones. All the best, Chad.
Awesome Cockpit, great paintwork, nice finish, good videocapture, what do you want more?! Thanks for sharing the Video!!! Great as always!!!
Thanks "AG"! I appreciate the kind words on the build and video. Keep up the great work on your channel as well. Always enjoying the updates there too!
Model making magic... putting real fun and total enthusiasm back into what is at the core of our hobby... and showing a few of those nit - picking rivet counters how to maximise the enjoyment and satisfaction of what its all about! Bravo :) (Apologies for dropping this comment into the replies tag of @Kitchentablemodeller... apologies if I got that handle wrong :)
Thanks, Christian. You are exactly right. I think far too often we focus on the small negatives instead of the huge positives in the hobby. And regrettably, that prevents folks from building some really good models and maybe even having a little fun like we used to when we were kids...haha.
@@FlyingSModels You are showcasing my model - making mantra... if I like a manufactured offering of a kit subject I want in my collection... I build it whatever the obstacle and more often than not if brings out the scratch - builder in me! I've never binned a kit, ever and I "survived" the grand - daddy disaster of them all, Revell's 1/72 Flower Class Corvette... just about scratchbuilt above deck... a two year project that challenged every skill I possess at absolutely every step and sub - assembly (I'm not a ship - builder, but I wanted this kit for 15 years FYI "Platinum Edition" NOT!)... It has been the making of me the way I turned it out and now, every aircraft I build is pure joy and indulgence... and that includes the HKM B-17E/F (2 of) and the Hobby Boss B24D... At the moment I'm doing ALL the Eduard Spitfires... Happy Days... and there are many others in the stash. I love this hobby and the kits coming out just keep getting better and present more fun than the last... kind and warm regards, always from the girls and I :)
@@christiankirkwood3402 You are so right in your approach and attitude. Others would do well to follow. Surviving the Corvette has helped shape you for sure....in a very good way. Not only honing the skills but also building and instilling perseverance and determination. Really makes building Eduard Spits like eating icing off the cake. All the best to you and the girls!!
@@FlyingSModels Thought I said too much in that comment! Your build's are a delightful awakening of a fundamental aspect at the core of my philosophy. Ergo sum inspirational :)
@@christiankirkwood3402 Not too much for me. I tracked and agreed with it all. I'm just glad that the builds are providing some inspiration. I'm working on an old Revell/Monogram full build video now that hopefully will illustrate that "joys" that can be found in building some of the old stuff. The stuff that we loved building when we were younger and less concerned about aftermarket and click 'n fit kits.
Absolutely mind blowing work. And the fun part is that super depth and detail you added in the cockpit interiors. I have tried these methods after looking at your videos but still have a lot to learn in terms of making cockpit detail pop out. Thanks for sharing these videos. Very informative
Really appreciate the kind words and I'm glad you are trying the techniques. I hope that they work for you. It does take a little time to develop your own style and approach but you'll get there, I'm certain. Let me know if you need anything or have any questions. Always happy to try to help where I can. Happy New Year!
Ive just built this kit and loved it.
Great build and another superbly presented video 👍👍😎
Thanks, Andrew. It really is a great kit. Not perfect by any means but what kit is. I appreciate the good feedback on the build and the video format. Cheers!
Very nice work
Thank you! Cheers!
I'm not very found of Airfix kits but you sir have turned it into a beauty very nice work
Thank you! I never gave them a try until recently since I had what appears to be some misperceptions about their kits. They may not be up to some other companies (or modelers) standards in every aspect but it's hard to argue modeling value. I probably have 30+ hours in the P-51 and that equates to less than $1/hour for some good modeling fun :) Appreciate the kind words!
Back in the day Airfix was horrid. I built one of their new release Spits a couple of years ago, besides the soft plastic a great kit. I'll definately build more, I've just got a huge stash that's out of date now and it's hard to justify to my wife.
John Nichols totally agree, John. They are great kits. When they figure out that soft plastic thing, they’ll even better! Time to start sneaking things past the wife...haha
@@FlyingSModels Have that figured out for trips into the city (1 hr drive) but mail order is another matter. As you can imagine why are you going to the city, I tie it in with DR visits or some such.
@@johnnichols9056 Good plan. Mail ordering Valentines gifts, Birthday or Christmas presents, etc. can provide some cover too :)
Nice job on the wood grain. That's the mark of any -D Mustang kit .
Thank you, Stephen. I was going to use oil paints for that part but since I wanted to get this build in under the 2020 wire, I didn't want to take the time for it to cure. Happy New Year!
To be fair the wooden floor was coated with a layer of black paint mixed with sand
@@ArthurMG00 Excellent info. I did not create mine in that way...hahaha. Maybe I should try it :)
@@ArthurMG00 True. I've seen it done both ways. I was commenting on the wood grain. Incidentally, I had a Great Uncle who flew mustangs, and he said that the rubber coating would get quite worn down.
Must must have been completely worn off....yep, that's the look I was going for...haha. Thanks again!
Fantastic build video! Thanks
Thank you David. Glad you liked this one.
nice build. I used your vid to help me in places I got confused in with my build. but just fyi, it's not a "Bazooka Launcher" there just rocket or rocket pods. keep up the good work and nice build.
Thanks for the feedback and the correction. Bazooka just sounds cool as opposed to "boring" rockets...haha.
Já assisti muitos canais mas realmente esse foi o melhor de todos pois ensina técnicas e vai direto ao ponto e mostra que não precisa ser kits caros para ficarem espetaculares , parabéns
Thank you for that kind and gracious feedback. I am glad to hear that the content helps and the format is direct and easy to view/follow. I appreciate the time you took to provide those comments. Cheers!
One more note. Back in the late 60s or early 70s my parents took a trip to England and came back with several of the Airfix dual kits in 1/72. Boy looking back I thought at the time great. Back then there was no cockpit detail at all if you were lucky a plug in lump to represent a pilot. Being just pre teen I did my best to make an instrument panel at least. Eventually they wound up as firecracker bait taking pics of them as they flew into pieces. Looking back I wish I saved a few but being in my 60s now they would most likely be in pieces now, oh well. Models have come a long way!
Ain't that the truth. Loved your "firecracker bait". So many of mine ended up that way as a kid. We are fortunate to have so many great models this day and age!
Great video ,you make it look effortless.......keep um coming !
Thanks....Will do!
Beautiful build. I have been tossing up whether to buy this kit and you have convinced me. Also I am going to pick up some Extreme metal paints because the finish looks superb!
You sir have earned a sub.
Thank you, Steve. I hope you enjoy the kit as much as I did. I appreciate the good words and the sub. Happy Modeling!
Beautiful job as always
Love how you do the Weathering
Final look is perfect 👌🏼
Thank you, Jim. Really appreciate your kind words and taking the time to provide them.
Very nice.
Thank you! Cheers!
Beautiful Mustang.
Thanks! Appreciate the good words.
Excellent work¡¡¡, to paint the interior of the cockpit previously use varnish or work the olis directly on the surface of the Tamiya paints
Thank you, Juan. I work the oils directly onto the surface of the Tamiya paint, putting down some of that white spirits first, though. Let me know if you have any other questions. Cheers!
Hi buddy your mustang looks fantastic airfix sure as come a long way there kits are just getting better I've just bought this kit and airfixs stuka 1/48 you have done a great build and paint job. cheers Gary from the UK.
Thanks, Gary. I completely agree with you. They are pumping out some great kits. I wish you the best for your Mustang and Stuka and appreciate your good words. Cheers!
Nice model, well done, stay healthy !
Thanks! I appreciate the feedback and well wishes and hope the same for you!
Dear Chad thank you again for an informative, educative, instructive video, your technique is so nice and smooth, thank you for sharing and happy safe new year👍🇩🇰
Thanks, Philip. I'm glad that the videos continues to be helpful. I appreciate the good words and well wishes and hope the safe for you in the new year. All the best!
Very nice!!!
Thanks, Jose! Happy New Year!
this kit is next up on my list i got it in another release that includes a swedish j26 scheme from 1946 and ,american and australian schemes from the korean war in the form of an f-51 i think im gonna for the j26
That will look great, I an. Have fun with it!
Amazing job as always, thanks for share, have a great 2021
Thank you and I wish you all the best for 2021!
Great work as usual!
Thanks. Another fun little Airfix build.
Once again Amazing work. Your attention to detail and ability to execute this is outstanding. Thanks for sharing your exceptional talent with us. Wishing you a healthy and happy new year . Take care. Eddie
Thanks for the good feedback and well wishes. Just trying to share some "modeling love" with the community. I wish you nothing but the best for 2021! Cheers!
Hello - I too, picked up this kit at Hobby Lobby with the 40% off coupon. It appears Airfix used a parts breakdown similar to the larger 1/32 Tamiya and Revell P-51. This is a very good thing. Airfix gives you the very noticeable recessed screw detail on top of the cowling that some how Eduard missed on their otherwise excellent but pricey kit. Eduard's surface detail is finer as well but for half the money, the Airfix kit is an absolute gem. Nice job and Great build video.
I only inspected the Eduard kit at the last IPMS Nats but I've never had the kit. It's good to hear that even it has issues as some have trashed the Airfix kit saying that it's not Eduard. I thoroughly enjoyed the Airfix kit and for the price, like you said, a real gem. Thanks for the good feedback!
@@FlyingSModels You are welcome. The Eduard kit roof of the tail wheel bay also has a visible seam down the middle. Not so on the Airfix kit. I bought an Eduard cockpit and canopy mask for it. Maybe will pick up resin wheels, too. All this and still cheaper than the Eduard. I like your black paint base method for your cockpit. I like to use Future Wax slightly tinted black. You can brush this mix right on. Future levels beautifully. Added advantage is the glossy Future overcoat makes it ready for cockpit stencil decals. Then shoot it flat clear. We never get tired of Mustangs.
I have seen others using the tinted future for cockpit washes but never tried it. I think my method is a little overkill but I enjoy the panting time. I may have to give that a try just to speed things up. Thanks again, Bob.
Super build, thnx 4 uploading (subscriber).
Thank you Peter and appreciate the sub! Happy New Year!
That’s a really good looking Mustang another good kit is the airfix 1/72 phantom
I may have to try that one. I was looking to build another Airfix jet versus a prop in the near future. Thanks for the feedback and suggestion.
@@FlyingSModels yes, the phantom is excellent as well. Give it a try.
@@danwilliams1686 I'll start looking for one to snag! Thanks for the recommendation.
i just bought a 1/48 airfix p51 because of this video lol
Sorry to contribute to the habit. Hope you enjoy it as much as I did. Cheers!
Amazing Bravo!!!!!!!!!!!!!!!!!!!!!!!!!!
Thank you!
That’s a terrific looking Mustang! I really like the way you achieve your effects and thoroughly enjoy watching you go about it. Happy, safe New Year! 👍🏻👌🏻
Thank you for the good words and well wishes. I'm glad that you enjoyed the video. Happy New Year to you as well!
Hi Chad, That's a great build. I'm working on the same kit at present, I'd planned on the JerseyJerk, but had a change of heart after I had problems with laying down the red, so after stripping the red off I'm going with the alternative scheme which is the same as yours but w/o the rockets.I've found the natural metal a real bugbear and had to strip and respray various areas, she is now starting to look the part. I must get some 2000+ grit sandpaper or sponges. stay safe
Thank you for the good words. Jersey Jerk is another good one. These NMF can be a real headache sometimes, especially if you want to try to weather them. I'm confident your rework will turn out great and I look forward to seeing the results. Please feel free to share some pics over on my facebook page: Facebook/flyingSmodels. I wish you all the best in 2021!
Really nice build, and video! I like the detailed explanations! Subscribed!
I appreciate the kind words and glad you like the format. Thanks for subscribing.
Beatiful great job...
Appreciate that, Terry!
I have this kit in my stash. This vid makes me want to get started on it. I like to do "versus" builds so if I build a P51 then I would build a Me 109 or Fw 190 etc.. I enjoyed your build.
That is a great idea. I need to start doing that too. Glad you enjoyed the vid and best of luck on your Stang.
@@FlyingSModels Thank you! looking forward to your next build!
@@jamesrowe6632 Thanks, James. Already got it in the works :)
Fantastic job my friend! One of the best I’ve seen in a long time, well done and also... reading some of your responses, love your attitude towards this awesome hobby!
I appreciate that, Gary. Airfix deserves the credit. I just added a little glue and paint :) I also am glad to hear that we are like minded in the approach/attitude toward our great hobby. It is a hobby, after all, that some seem to take far too seriously. I hate the some may have lost the joy that comes from just building and finishing something rather than sitting back and critiquing things in some odd pursuit of perfection. Based on some of these comments, I decided my next video would be to build a 30-40 year old kit to hopefully bring some folks back to what we enjoyed about the hobby when we were young. All the best to you in this new year!
@@FlyingSModels I like that idea, and since I’m a subscriber, I’ll know when it comes out! I like the old kits , I built a SBD in 1975 and painted the bomber fluorescent green, man I wish I still had that lol I was 9 and am still having as much fun. Just adding a “little” more realistic colors lol... Keep up the inspiring work my friend!
@@garybarter5338 Now that's what I'm talking about. What's better than a florescent green Dauntless? Picasso style, I say. Next video will be the Revell/Monogram A-6 Intruder (EA-6A to be specific). To me, it's always fun to build the kits we had when we were just getting started and then compare the differences. Like you said, too bad we didn't save the old builds. But they did have a good life serving as our "weapons of war" in our make believe air battles. That or as it was in my case, compartments for packing firecrackers and for some early explosive training/demonstration :)
@@FlyingSModels truer words never spoken! I just ordered a 1/48 Pegasus (Snap) P-51 and decided I grab a pilot for it too. Spent $28 total, the wife likes WWII birds, lucky me. Like my Tamiya F-84, it will be done completely with craft paint. The F-84 was my first using only craft paint (Had to experiment) and I was blown away with the results!!! Love this hobby and learning daily ...don’t think I can post a pic here but I would if I could.
@@garybarter5338 Wow, Gary, I missed the part about the craft paint. That, my friend, makes your F-84 results that much more impressive. You are a lucky man both in results and in having a wife that appreciates the "finer things in life"...haha. I hear you about the pics here. But please continue to share over on facebook as I enjoy seeing them and the inspiration they provide.
Stunning build! I'm very pleased to see Airfix is making better kits than the utter crap they offered back in the late '60s and early '70s. It's wonderful to see so many manufacturers have upped their game. Would you recommend this kit over, say, the Tamiya or Hasegawa offerings?
Thank you, Doug. Airfix has definitely upped their game. If they'd get some different plastic, their kits would be even better. Don't get me wrong, they are great kits. But they plastic is a bit soft for my taste. I think the Airfix kit is superior to the Tamiya kit in many ways (and the Tamiya kit is better than the Hasegawa release). If you want to open up the wallet, Eduard offers a really nice kit with lots of extra details available.
I’ve built 2 of these kits, with the latter being my favorite. Didn’t model either after Little Indian or Jersey Jerk tho, mostly whatever I wanted to. I tried to paint the second one after “Toulouse Nuts”
Excellent. I really enjoyed this kit. Always like to see the work of others so if you want to share your Mustangs, feel free to post over on may facebook page: facebook/flyingSmodels.
Just built one (different boxing though) and I liked it but.. I did not like the tail assembly. And it left it a bit twisted, something i know others got too.
But the engine cowling as one piece is great. Eduard does not have that.
A kit I want to try next, Eduard´s. Which much finer surface detaisl, it seems. but i might build more Airfix boxings too!
Agreed. The Airfix kit is not as refined but it builds up into a nice model. I'm back working a Tamiya kit now but have the Eduard one to try one of these days. Good luck on your Eduard build.
@@FlyingSModels Thanks! :)
I like the Tamiya too - but was a few years since I built one. Should really pick another up sicne I have so many P-51D decals I want to use.. ;)
And then to compare that kit..
Hope I see yours here!
Congratulations on the channel and your kits are works of art.
I suggest mounting the 1/48 Kinetic kit of the Mirage IIIE
Thank you, Fabio. I appreciate your good feedback on the channel and the models. Great suggestion and I think I have that kit already in the stash somewhere. Cheers, Chad
Just a comment for the algorithm
The algorithm appreciates it!
I'm a complete convert to your white spirit-oil paint weathering. I noticed you clear coated the AK metal finish first and I assume because it's enamel based. I'm about to use Vallejo Metal Color (acrylic) on my P1Y1. In your opinion; go directly to the oil paint weathering since it's acrylic or clear coat first since it's a metallic paint? Thanks for these great, and inspiring, videos.
Yep, you got it, Ken. Only clear coated the AK since it was enamel based (although I mistakenly said acrylic lacquer in the video). I used a flat to semi-gloss clear for this. Look forward to hearing how your P1Y1 goes.
For how much flack I've heard about this kit, it sure seems to build up nice.
It does build up nice and easy. I rarely listen to all the flak. I just focus on building and having fun. I'm from the old school and remember when even the best models were hard builds so I'm thankful for the new stuff that comes out....haha.
Can you build the new Airfix Bucanner?
I need to take a look at that one. Haven't seen it yet. Probably can have a go at it in the future!
Thanks a lot Chad!! Amazing work as usual... Truly inspiring me to make a 1.72 One!! I really like the Airfix kits too, they are not expansive buy very accurate!!! What's about a new tutorial for beginner like me?! Lol!!! Really thanks and have a Happy new year!!! Ale
Appreciate the feedback. I look forward to hearing or seeing your work on the 1/72 Mustang. I'm certainly not beholden to Airfix but having not built really any of their kits until recently, I found out that I wasn't giving them a fair shake either, just based on my old and incorrect perceptions. What kind of things would help a beginner that are not highlighted in the current videos? I'd be glad to try to help. Happy New Year to you as well!
Thanks for your answer Chad!!! For the beginner guide i'm looking for a method for the instrument panel! I'm not a fan of the decals too but i don't have something for create a new One! Thanks for all your help!!! Have a Happy New year!!!;)
I'll see if I can maybe make a specific video for this. Hard to create a new panel without a punch and dye set but I may play around with it. Or maybe try to find a source for an inexpensive set that I can try and recommend vs. the $50-$60 set that is like the one I currently use.
Always check references. Many mustangs had bare metal gear bays. Only spar would be in zinc chromate. Good build.
Yep, I knew that folks would find me out here. From what I can tell, the gear bays on this one were metal color but I saw that just a tad late to make the change. Good catch!
@@FlyingSModels it looks good tho. Breaks up the greys and blacks.
Thats for earlier batches. I dont think either of those schemes represent an early P-51D. After a while stuff started to happen with the bare metal gear bays and they started painting the whole thing with zinc chromate, both yellow and green. When exacly they started that is a difficult line to be drawn though. It got very inconsistent on the gear bay painting department. You cant really tell for sure how it should be depending on the chosen scheme.
@@ArthurMG00 correct youd have to look at NAA records or individual logs if it was done in the field
Those Airfix kits seems really good in shape and easy to build. Maybe less details than the last Eduard kits, but for the price they are a good choice, and a beautiful base for scratch or add-ons... I bought their last Spit MkV in 72, the panel lines are now very good, very thin.
Congratulations for this beautiful Mustang, your painting and weathering techniques suits this kits very well. What is your next project ?
They are really good kits. There are no perfect kits but for the money, it's hard to argue with the results that can be achieved with their kits built pretty much out of the box. Thank you for the kind words on the P-51. I'm currently working on an old kit from my childhood as kind of a "throwback" to see what can be done with a 30 or 40 year old kit. It's the old Monogram A-6 Intruder. Cheers!
I just received this kit today, can't wait to get started.
Just a question: Step 16 shows the need to cut the tailwheel doors off if the kit is to be assembled wheels up. If these doors are cut off, there is obviously a need to close them. Are these cut of pieces to be glued flat to the fuselage, or is there a replacement part?
I'm buggered if I can see that step! My old eyes must be faulty. Grrr ...
EDIT: Just found it. WTF? Tailwheel assembly (down) is step 16, yet I have to go to step 47 to find the gear up closed tailwheel doors. Thought I was going nuts, LOL.
Sorry for my late reply. Sounds like you found your way out of that jam. Yep, obvious, go to step 47 not 17...haha. Keep me posted on your build!
it would be awesome if it had an pilot
I need to start putting in some pilots, that's for sure.
Awesome job as usual buddy I’ve just made the Airfix P51D version and she fit like a dream :) 👍
Really appreciate the feedback. The kit really is a good one and underrated in my opinion.
Your very welcome and Happy new Year to you and your family 🍻🥂
Your your voice reminds me of watching science videos in high school. Lol. Good stuff. One thing...you didn't paint the exhaust and the exhaust stains.
Thanks, Will, I think. I hope the voice doesn't cause you to fall asleep like we all did in high school science class...haha. I gave the exhausts a quick paint but didn't do much weathering on them or staining. I didn't see much in the reference photo I had so I left it clean...maybe a bit too clean. Thanks again!
Nice videos man, just discovered the channel.
BTW aK extreme metals are not lacquer based, they are enamels! :)
Thanks for the good feedback, Bruno. And you are exactly correct, I realized after I did all the editing and publishing that I had misspoken , thinking I was talking about AK Real Colors rather than their Extreme Metal range. Once loaded up, it's a pain to try to edit so I just left it in there as a "test" to see who would catch it. So far, it's you and one other guy. So excellent investigative work :) Now let's keep it a secret between the three of us...hahaha. Cheers!!
Friend, you did an outstanding job with this kit. Top skills and technique. I agree that Airfix are producing some amazing kits recently and I think they need more recognition foe their quality. Just wondering which airbrush you use? Thanks.
Thanks for the your good feedback. They definitely deserve more credit. Lots of folks are just too picky, in my opinion. As far as the airbrush, I'm currently using a Badger Velocity Renegade. I think I have a link to it in the video description if you want to check out the the specs. Cheers!
Chad, fantastic job as usual! Question: at 17:00 you use raw umber oil paint over white spirits to add grime in some panel lines (mostly under the nose). Then, at 19:00 you use AK panel liner much more extensively on the fuselage and wings. What is the rationale for two types of panel liner? Is the raw umber a "leaking oil" effect while the AK panel liner is a different kind of dirt? Just want to make sure I understand the nuances!
Thanks, Dexter. I think you've got the basic premise. The oil over white spirits is applied to a flat or near flat coat and this causes the oils to soak into the surface a little and blend with the paint. The panel liner is applied over a gloss coat and really just provides a dark wash to the panel lines themselves. Hope this makes sense. If not, let me know and I'll try to explain it better.
You should do the airfix /48 sea fury
That is a good idea. I've done the Trumpeter one. How the Airfix kit compare? I really want to do their Seafire 47 soon.
@@FlyingSModels I haven't yet got the kit myself but I've heard great things about it, fairly sure it's a brand new tooling too.
@@LondonEmergency999 I'm already checking it out :)
@@FlyingSModels I'll have to pick one up myself soon.
Looks gangbusters! Best $20 you've ever spent. What other 1/48 Airfix kits does Hobby Lobby carry? Thanks for another great video.
Appreciate that! It was a great investment for sure. My local hobby lobby has this one, the 1/48 P-40, and a few of their 1/72 kits. Not an overly large selection.
@@FlyingSModels Same here with my Hobby Lobby. Going to mine in a few minutes!
Outstanding build sir.
I have a question: what is the setup for airbrush when you using AK metallic paints ( size of the nozzle and air pressure).
Thanks and keep video's coming.
Thanks for the good words. On the airbrush, I'm spraying with a 0.2mm nozzle at around 18-20 psi. Not thinning the paint. Probably have the trigger setting at 50% or less to minimize paint through the brush. Hope this helps.
Outstanding! I too am a HUGE fan of the Airfix P-51D. Working on the "early" (D-5) boxing now and enjoying it every bit as much as the boxing you just built. Some minor critiques if I may... The exhaust gate(s) at the bottom of the fuselage (both of them) should be natural metal inside and not YZC and the inside of the windscreen should be black and not IG as well. Again....fantastic job and I'll be stealing some of your techniques as my painting commences! Keep 'em coming!
Appreciate the feedback and the critiques. It's a really nice kit and I must admit that I often paint in a way that's a little more artistic than realistic. I think the wheel wells and gear doors were also aluminum and not YZC so I've got more than a few inaccuracies here. I appreciate the good words and thoughtful inputs. Sounds like you are having as much fun on yours as I did mine. Maybe on the next one I'll be more realistic/accurate :) Happy New Year!
@@FlyingSModels As I'm sure you know, the wheel wells, doors, etc. on Mustangs are a can 'o worms to say the least! Thanks for taking my comments as they were intended......positive! LOVE your builds and truly appreciate the time you take to video them!
By the way, went to my local HL earlier and found a guy who works in the models section. Asked him if there's any way (since they stock Airfix kits) to get the D-5 boxing and of course, no joy. I didn't see the P-40 there today but will get it the next time it's there. Thanks again!
I appreciate any input I get, especially thoughtful critiques like you provided. I think too many folks take this modeling stuff and any feedback way too personally. Sometimes I have a habit of building what I think it should be versus what it was. I have to admit that while I have a bunch of references, the research part is probably an area I really should spend more time on. I tend to enjoy the creative side maybe a little too much. I don't want to get completely off base when it comes to accuracy and historical correctness so more research would help with that. Sorry about the D-5 at HL. I suspected that would be the case as they seem to only stock the same things over and over. I wish my local shop would start mixing it up a bit. Thank you again! Happy Modeling!
@@FlyingSModels The world is full of thin-skinned sheeple nowadays. I'll leave it at that! I hear ya regarding being creative as opposed to being an "accuracy nazi". It's a fine line between the two at times! Personally, I enjoy the research and/or history part of modeling as much as the actual building itself. On top of the 400 kits and 4" binders full of aftermarket decals, my "library" of research material is over the top too. Hey, we all have our vices, right?! Thanks again Chad and keep 'em coming!
I hear you. Maybe I need to consult with you before building as the official research department...haha. Appreciate all the intel and feedback. Headed to the shop to start on the next one :)
The diamond seat pad depends on what plant the plane was built, calif or texas.
Thanks, Glenn. I didn't realize that. Guess mine was build in the "right" plant after all :)
Beautiful build 👌🏻, i have the same kit ready for build.
What kind of airbrush & compressor are you using ?
Thank you for the feedback. It was a fun little project. I'm currently using a Badger Velocity Renegade airbrush with an Iwata compressor. I think I put links to them in the video description if you want to check out the specs. Thanks again and I wish you the best on your build!
Wow! Another fantastic build. Thank you. I'm struggling a bit with lighting. There are times when I'm finding it difficult to tell if the paint is coming out of the airbrush. You don't seem to have any issues with your lighting casting shadows on your work. What kind of lighting set up do you have please? Do you have any tips?
Appreciate the kind words on the P-51. Lighting is extremely important, that's for sure. I have recently moved my modeling setup to a dedicated work space. In that area, I installed LED light strips above my work area like these: amzn.to/3qbNAW7 It's pretty dang bright but works well. Let me know if you need anything else. Always happy to help.
@@FlyingSModels Thanks for the info. I've been trying to work with 3 angle poise lamps shining from above and the sides. I'll try LED strip lights. Thanks for the tip. All the best.
@@horatiosplodge3370 Let me know if you need anything else.
So Nice 💘💘💘💘💘💘
Thanks
Excellent build and colors for the interior. What brushes do you use for your detail painting?
Thanks! I mostly use AK brushes (3/0) but I do have a few other brushes I've ordered from Amazon (can't remember brand) but they are also 3/0's, I believe.