BUYING A DIESEL KUBOTA T1600 LAWN TRACTOR OFF MARKETPLACE...CAN WE SAVE IT??
ฝัง
- เผยแพร่เมื่อ 18 มิ.ย. 2023
- IN THIS VIDEO WE FIX NUMEROUS PROBLEMS ON A MINT LOW HOUR KUBOTA T1600 GARDEN TRACTOR, WE FIX THE HYDRAULIC TRANSAXLE, WELD NUMEROUS CRACKS ON THE MOWER DECK AND MORE
Buy me a coffee if you enjoyed this video and want to help support the channel 🙂: www.buymeacoffee.com/albericidav
MY EMAIL---- ALBERICI.DARRELL@GMAIL.COM - ยานยนต์และพาหนะ
Good to see some of the younger generation know what hard work can get you . Some of these young kids think life is free. They got "corner time" instead of getting what they needed,a belt across the ass.
You are one of the best mechanics on TH-cam and I am not kidding. I will pray that your health gets better. When ya'll got that dump truck I thought before you did it, it was an exercise in futility to weld the tip back on that brake holding pin. I am sure wrecking yards have lots of those pins holding in drum brakes, but you pulled it off. Kudos to you for your ability. The design on this trans was poorly done and conceived and methods of holding those ports for correct flow seems to me to be knurling the shaft with a hammer and center punch, or after cleaning it with brake cleaner to put red locktite on the silly thing. I will pray for your good health.
I would love to hear more ideas from you this is a terrible design
You have impressive skills. I was up at 3am and started watching this. Couldnt sleep and got fascinated by a hydrostatic drive being repaired. Called a couple of times no answer. My number ends in 28.
Hey my friend I’m always happy to see you here!!🙂🙂 lol I have trouble sleeping myself, I’ll have to look back in my phone, I get so many telemarketer calls so I usually don’t answer out of state calls next time leave a message and I’ll call u back, however my phone service is really bad if I’m down at the shed the phone only gets texts (sometimes)
Now that’s a good save! It must be a kubota thing to have all the hinges / linkages rust up. Lol! Mine didn’t have a smooth moving part on it when I saved it from the junkyard.
lol yea sitting will do that
Nice fix on the hydrostatic trans. I had a similar issue where the bushing was covering the holes. I pressed it out and added some loctite & pressed it back in. It's been going strong for 7 years now!
awesome👍👍🙂🙂 well done brother
That mis-aligned bushing was definitely the main problem with your hydrostatic drive, but I suspect that the brakes were dragging also because the pivot was so seized!
You are simply masterful with all your repairs!
yes you are correct🙂👍
Kubotas never die, they just slow down then get rebuilt. What a score!
I agree nice little 'bota ... He shoots, he scores ‼
‼Goooooooooooooooooooooooooooooooooooal‼
😊😊
esp their engines!
Glad you’re back. Missed your video very much. Hope you’re health is doing much better and that God will continue to bless you, you’re family, and your work.
2:46
that means a lot William, thank you❤️
Big fan of the older Kubotas from the 80s I had a Kubota l2550 tractor loved that thing.. thanks again for another informative video I almost bought one of those guy wanted to much money
Right on!! I love the engine on this mower but I’m still not a big fan of the rear end or mower deck the G series are made muchhh better like the g1800 and g1900
Sunday morning I always sit down in my basement and watch a full video of yours, makes for a good day
Wow, thanks!! I really appreciate that!
Those machines are a good tractor Kubota made a 1900 model with a 3 cylinder engine rock solid machine . Cutti g decks always crack. The original design is by shibaura and are still made by them expensive little buggers but very good .they were also badged Ford and ransomes I have been watching your videos your learning very well good to see a young man having a go.
Right on the 1900 is a much better built machine
Good to see you back Darrell. Hope you're feeling better.
Allan in Columbia, SC
thank u very much Allan!!🙂🙂
👍👍👍👍👍👌Great job fixing a known problem and repairing the other less apparent problems you came across along the way, nice job on refurbishing the deck to better than new!!!
thank u very much🙂🙂
Great video, I really like your reinforcement of the mower deck edges, you just made it better than new!👍
Glad you liked it! 👍 thanks for watching!!
Looks great with that nice new orange paint on the deck and works well! Great job on the repair!
Thanks 👍 Andy!
I certainly enjoy these projects you take on. I love seeing what someone has decided is no good being made fine again..
thank u my friend🙂
Hey guys thanks for watching!! Let me know your thoughts on the design of this transaxle and why you think the bushing slid up
This thing just screams lawn tractor pull. A little turbo, stack out the hood, solid axle swap. Pretty cool.
dude, that would be so awesome. However, there’s no way this transaxle good hold up to that I would have to swap it out with a more heavy duty rear end.
Thanks for posting this video. I just picked one of these up, while I didnt have the hydrostat issue (yet) the teardown and reassembly of the parts of the mower was helpful to watch it done for future use. I just got a workshop manual for it, so this video combined with that I feel confident I can tear into it if needed. Its absolutely a cool and unique mower and im super happy to have it.
Good job on the mower young man. Thanks for your good videos.
Thank you too!
Well done as always!!! Can't wait for more!! Hope your feeling well these days my friend!! God bless you and your family, and thanks for sharing!!!
Thank you very much!
Great job fixing the transmission! Great little machine 👍
thank u Dave I hope u get the case running!!
Another great video!! Love how you dont care what it is, you just take it apart and fix it haha
Id forget how it went back together lol
thank you very much!!
Well done. I bet that will outlast most of us with that kind of continued care. Thanks for letting us watch the progress and see the result.
You bet thank you🙂🙂
Great buy, and wicked fix, keep up the great content. 🚜 👍👍👍
thank u malcom
Great job rehabbing the Kubota! That brake pivot shaft was crying out for a grease fitting.
Yes it was!
I bought and refurbished mine 3 years ago. It's a 1995 w/750hrs. The universal joints on the transaxle driveshaft were shot. It's been awesome ever since. I prefer this to any new one today. Built to last with good maintenance.
that’s awesome!! yea I gotta replace the front u joint, I wish they had grease zerks
Good job Darrell, gotta love those kubota diesel motors.
Thanks 👍bill 🙂
Good job figuring that one out. I love my Kubota compact.
thank u 🙂🙂
I absolutely love your channel. Keep up the amazing work you do
Thank you! Will do!
Awesome mawer. Great job fixing it!
Nice 2 cil Diesel engine. Don't think we have them here in Europe. Keep de mower deck clean after mowing and it will be strong for many years to come. Thanks for sharing! Marten
thank u marten
Another nicely done, well thought out save! Kudos!
Glad you liked it!
You are simply a great mechanic. I'm truly impressed. Keep up the great work. Hope you do really well with you channel. Cheers
Thank you very much! that means a lot
Great repairs and trouble-shooting! Between this and the Gold Wing, I think you could restore and repair just about anything
thank you 🙂🙂
That is an awesome little tractor! Love the diesel engine. Nice job👍👍👍
Thanks 👍🙂
SO relaxing to watch you repairing and replacing all the stuff. Great job 👌👍
thank you!!🙂🙂😊😊
yea a good pace - not too ponderous or jumping all over the place
Ikr keep up the repairs love it
Awesome work both with the kubota and the camera.. Angles, editing so on.. Just perfect.
Thank you very much! that means a lot!!
Awesome video production! That’s a happy ol tractor with you grout back to rolling 💪😎👍
Thanks 👍🙂🙂
Very nice video my friend, loved the reinforcement bar trick, top notch! I noticed also like other viewers have mentioned that some subtle changes in editing went a long way, you can tell you have polished your skills in the computer side of things, the synchronization of the time elapses and music is on point. I am so happy every time you post, is entertaining, I learn a ton and also get the chance to see that you are doing well, priceless! Keep them coming chief.
thank u so much man!! it takes me forever to edit videos and my computer wants to blow up lol I need a new one but I work with what I got and try my best, thank u for everything!!🙂🙂
@@TheHomePros6221 Much talent to get it right , Class act , pleasing to watch you work.
I've got my grandfather's T1600 that he bought new in around 1990. First piece of equipment i learned to operate. I remember long summers of cutting grass at his rental properties on it as a kid. Was still using it the cut the grass at my own house until two years ago when the transaxle started leaking badly. That particular Eaton is a known lemon (I've got the same one) but they changed it out for an upgraded model on the later machines. There's a serial number break in the service manual that talks about it. Anyways, I was just holding onto it to have the engine for an undetermined future project, but seeing one run again tempts me to put it back in service as a mower. Great memories if nothing else.
Keep up the great work!
Awesome fix! I hope you're feeling better!
Thank you! it’s a rollercoaster but I just try and deal with it ❤️🙂
Great fix. A few bucks of consumables, & your time, along with initial cost & transportation, you got a great mower. Kubota diesels are known for lasting a long time, & often outlast the machines they are fitted to.
You got that right!🙂
As usual you did it again ,it sure is mind boggling how you investigate and spot the issues .
And even more so how you fix it with precision technique
Was your dad or grandpa good at tinkering and if so did they let you help
You sure are good at what you do I enjoy watching in amazement
Thanks again
thank you soo much I really appreciate that!!
Always look forward to your videos. You got a good deal, great job
Awesome! Thank you!
Much respect for all the camera angles, love the vids ive always wanted to build some kind of cart with a kubota engine maybe if the axle goes bad again we can see something cool with the engine in the future 👍
thanks again it’s tough and takes forever but I’m glad u enjoyed it, I actually was thinking the same thing as I really don’t need this mower but I love the engine!!
Seconded! I loved the "blade-o'-grass cam" angle, was clenching up waiting for the camera to get pulled up into the blades but was relieved when it didn't happen. So much drama! :D
kubota makes there stuff so easy work on thats why i love kubota products
You are one smart young man. I enjoy all of your videos.
Thank you so much🙂🙂
Great video! You always do great work and you do it right!
thank u Samuel!!
You did a good job, with the vid and the machine. Thanks! 👍🏻
Thanks for watching🙂🙂🙂
Really enjoyed this video. Thank you so much for taking the time to video this. God bless you and yours.
Glad you enjoyed it!
You do really great work! Just my style of mechanic work.
Thank you very much!
Great video.. I like how you explain things as you found them.....
thank you very much Shawn!🙂🙂
I'm thoroughly impressed!
thank you my friend!
Great troubleshooting and find 😊
Nice job, Darrell....you've ended up with a cracking little machine...😊👍
Thanks 👍 dave!!
Very nice work both on the mower and the video!
Glad you enjoyed it
Your patience is very impressive
thank you Sam 🙂
good work, this mower is a gem!
It sure is!
Nice fix on the trans & mower deck, you have some great skills!!
thanks👍😊👍😊😊😊😊
There’s a very good job fixing now the lawn more is it to fix some other stuff on a day off that was in bad shape and like you said you liked it diesel engine anyways so keep it up the good job God bless
Thanks 👍
Found a old push mower in the trash, I welded up the deck as it was cracked, painted it, Rings were worn so I homed and threw new rings in, thing ran like a champ, Gave it to my neighbor, someone stole hers. Love finding stuff like this to work on.
Brown widow are spiked Black are smooth. Brown as venomous, but do not inject the quantity as black. Love your videos! You are a master mechanic, and meticulous! Great job!!
the black and brown widows around here both have spiked egg sacs 🤷
MM77 Approved 👍🏼👍🏼…………………………………………………..Now you can add diesel riding mower to the list of things that you have fixed!! LOL!
haha I think I’m getting a mower addiction I just got a sweet John Deere
Ahhh cant wait to sit and watch your project ..
🙂🙂thank u!!
massive skill set. I so enjoy your vids.
Thank you very much!🙂🙂
a got a micro tractor with a similar 500cc engine, they never die 👍👍😉😉 nice job bro
thanks bother I actually watched your vids on it.. super cool!
@@TheHomePros6221 really? 😀 thanks bro 😂 sadly i spoke Italian on it, maybe in future i'll swap to english 😁
Driveshaft needs some major repairs. Vibrations and front ujoint still bad. I'm sure you're on it already. Nice work, love Kubota engines.
Everything is good except the front u joint.. I already got one ordered bugger was over 50 bucks 😣
Great work!! Thanks for sharing
Thank you too!
You sure know your way around a mower. Very nice job.
Thanks 👍🙂🙂
ha ha you smashed it again buddy !! what an absolute champ !! kudos brother
Thanks again! my guy!! I really appreciate the watch!
I just sold my T1600 with a smoked starter for 600. Their cool when they run but very troublesome tractors when they want to be. Hope she treats you good!
👍🙂
I like how you used the steel rods for reinforcements. I'm not sure I would have thought of that, but it should work really well.
thanks David they have been working good
Great bargain nice repair and video edition.
Glad you enjoyed it🙂
Wonderful video!! I have 3 questions. 1.How did you learn how to work on so many different types of machines? 2. You have a magnificent shop. How long did it take to get everything you need and who taught you how to use the various pieces of equipment ? 3. I'm extremely jealous of your patience and expertise. Can I be your apprentice?
thank you very much! I am self taught, ever since I was a kid I was always taking stuff apart and seeing how it works. I got into R/C cars when younger and learned a lot from that as well, you just got to have a want to learn and have a passion for it, im always watching videos fixing stuff and you can learn a ton from that, im also not scared to tackle somthing it’s always a learning experience 👍😊
Your one of the kind....bravo 👏🏻👍🏻💯
You are on the right path....keep it up.. soon you are gonna hit the 1st Million Subscribers.....just hold on 👌🏻 greetings from Kingdom of Saudi Arabia 🇸🇦 🌴 💐
Thank you so much 😀
I believe I would fishplate those top cracks with plates up underneath. So the plates would be welded up under the top braces. I feel you did a most excellent restoration of this Kubota. It would now be worth 5 times what ya'll paid for it.
thank u and that is a excellent idea!! I think the cracks were caused by vibration in the u joints
Thank you for sharing, I learn a lot always a good project👍👍👍👍
You are very welcome I’m happy to hear that!!
Excellent Video! Very good detail. I'm thinking about one of these for a Gold cart conversion (Electric to Diesel). Lots of problems with these HST's. Used in wide variety of small tractors, including JDeere. Again, Excellent Video.
thank you very much my friend John Deere actually uses the tough torque transmissions, which are made a whole lot better in my opinion than this one now the G series kubotas have a much heavier duty transmission that is far better than this one
Another fantastic fixup👋I'm still getting over the Goldwing😀
thank u very much!!
Very nice fix and vid 👌
Looking forward on ur next vid 👍
Grtz from Belgium ✌️
Awesome, thank you!
Just found your channel, so glad I did, thank you for your videos.
Glad you like them!
Darn fine job done on that little Kubota my friend.
Thanks 👍
This is a great video. That machine is incredibly clean for its age!
Couldn't agree more!
Nice that looks like a brand new one!
sure does🙂
Nice catch on that rear end!
Those small Kubota engines are more or less indestructible, used in cargo refridgeration units, running 24/7.
they sure are!!
Newish sub here, you are legit and do excellent work! Loving the videos, keep up the good work
thank you very much!!
👍👍👌👌 Nice work! Thanks for the video.
Thanks for watching!
Looking forward to getting into this one, looks like a great buy!
Hope you enjoy it!
Great job indeed 👍 👍 👍 👍
WELCOME TO KUBOTA FAMILY BRO😉
Thanks! 😃 I actually have some other kubotas even a kubota push mower
@@TheHomePros6221 yeah, i realized after 😁, kubota engines are everywhere 👍👍 i've seen some people swapping a kubota engines also on a Willy's jeep, there is something also on TH-cam 😉 bye bro 👍👍
Hell that engine is worth more then five hundred. Good buy. Thanks from Sc
I agree!
Nice work getting it fixed up…
Thanks 👍🙂🙂
Another excellent repair and video. Fella you bought it from is my buddy....we grew up together.
That's awesome thank you so much for watching!!❤️❤️🙂🙂
another score with the kubota, great video, Hey Dave's shop shouted out to you the other day with the old case your technics
thanks Dave is a great guy!!🙂🙂🙂
@@TheHomePros6221 ya really enjoy his videos
Nice job, that mower should last a long time.
thank u my friend!!
I enjoyed your video. Stay safe my friend. God bless you.
🙏🙏🙏🇺🇲🇺🇲
Thank you my friend
I'm thinking ... diesel golf cart! Nice find.
that would be awesome probably kinda slow though…. maybe a lifted 4x4 golf cart diesel 🙂🙂
@@TheHomePros6221 Kubota diesel, side x side running gear, golf cart body - you can do this! 😅
@@billwotruba9432 golf cart lawnmower ??..😋😊😊
@@TheHomePros6221 Every golf course should have one😅
Well I am amazed at the good work that you're doing my hat is off to you I'm glad I got to see this video and by the way good 4th of July can you and your family and the puppies ha ha
Thank you very much!
You have a skillset not seen in many your age... You earned a sub from me.
thank you my friend😊