I think your vids are great already fixed my dryer because of you and now I’m on to my dishwasher which my wife put washing up liquid in and upset something 👍👍👍👍👍👍thank you. You should get a medal for saving the environment just think how many machines are saved from disposal because of you. Thousands and increasing by the day 😀👍
Great explanation and than you. One thing I would add is that when you got the new replacement part it would have been great to use the multimeter on the new part and show and confirm the circuit to be working before replacing. Thanks again.
Thanks, bought the part from your ebay shop, all working. I messed up the legs as didnt realise you can lower them from the front with a screw driver. Thanks very much
Awesome demonstration. Helped me no end to locate and test my heating element. Unfortunately my heating element is good so the search for the problem continues. Thanks for posting the video!
Glad it helped Thank you For leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thank you for this video. I've removed my heating element as instructed and tested (the element itself appears to have continuity), but the bit in your video i wasn't quite able to follow was where (10:37 onwards) where you diagnose one of the thermostats going open circuit. Where you show us using the spare heater going across the 2 terminals. I cant quite see the points on the element where i am meant to be testing this
Bril. Followed the procedure no problems. A bit fiddley at times. The only annoying thing was when I had removed the faulty heater and checked it with the meter there was continuity. I'm absolutely sure it was open circuit in the dishwasher because I had used the meter and there was no heating during the wash cycle. Next time there are electrical contacts in a suspect device I shall follow the saying "if in doubt give it a clout" first.
Do you have a video for possible wiring? As I've changed the heating element and the small thermostat and still no heating. It runs and fills but no heat
Hi. Can you tell me how to test if the turbidity sensor is good or bad. My AEG dishwasher is not heating. I assumed it was the heater but it is testing fine. I assume it is not the PC board as the display is fine. Research suggests the turbidity sensor. I am in Australia. Thanks for your informative videos. Greg
Just had my 18 year machine stop heating while in the wash cycle yet seemed to heat just about enough dry everything. .... nothing wrong with it except the filter and little float needed a good clean... Check the obvious before pulling the machine apart
1800w should have 32 ohms resistance. however combined im getting 16 but 1 of the heater thermostats has browning like yours. , meaning ive problems correct?. in effect circuit is partially open?.
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Hi, my dishwasher is washing and draining but at the end bringing tap light on and not heating water as well. What can be reason. We changed drain pump and inlet pump 2 month ago.
I have Beko dishwasher and I can see that dishwasher is drawing 2000W (flow heater), but only for 1-2min in each cycle. I tried replacing NTC at the bottom, but that did not solve problem. Any idea/suggestion?
I was reading and found this online. "Bleach and bleach-containing cleaners are not recommended, especially if the dishwasher has a stainless steel interior." Why shouldn't you use bleach in dishwashers?
Hi, great informative video. Why would a dishwasher overheat? the error code is F7 and in the dishwasher manual, it's saying F7 is overheating. the machine is a bush dishwasher BFSSAE12W
Glad you enjoyed @nicholasradwell541 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Hi Stephen: Really the only test you need to do is across the 2 pins on the white connector. If your meter shows open circuit or high resistance, then the heater unit is faulty and needs replacing.
RSC Electrical hi, but can there be a case of a good heating element but a faulty thermostat? My dishwasher won't heat so I just unplugged the electrical cables from the heating element and checked the resistance and got around 26ohms for a 2000W element. The circuit board looks OK (no signs of arcing or black marks) so could it be a faulty thermostat? I don't know how to measure that
Warning. These Electrolux dishwashers have now mostly integrated heater inside inverter circuit pump, and if its not heating, problem isnt mostly in the heater, but because no voltage is coming to it from the main control board. (Not the display board on the panel) So check the relay with 9V battery if its contacts are switching but even here isnt mostly problem.
Great advice to the people that read this. Hope you had a good New Year. Please remember to subscribe to the channel as that helps us glad we could help you @LordCarlSagan this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Really glad it helped you fix your problem Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t facebook.com/how.to.repair.appliances/ Stay safe
So I have a GE dishwasher and they keep telling me that I don't have a high limit thermostat and I do and I can see it myself so I'm wondering if I can put a generic thermostat in place it's a 180-degree thermostat?
I cannot be 100% on this but I would not recommend it as you do not know what the limit temperature was designed at. please use site when you have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Iam Glad we could help you Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Hi, could anyone help ??? I have a dishwasher LBL12A (BRAZIL) but it is W10142826a. She is not warming up. she ends the normal cycle. I tested the resistance is ok. when i run the diagnostics (normal / heated dry (3x) during the process it heats up. what could it be? please !!!!
sorry for delay when you have a technical question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Try getting hold of one of our engineers free of charge on facebook, we will work through one to one diagnostics and repair of your machine :) go to our facebook page to book in with paul facebook.com/how.to.repair.appliances/
I will get round to doing one of these at some point @nailsnails2090 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
I think your vids are great already fixed my dryer because of you and now I’m on to my dishwasher which my wife put washing up liquid in and upset something 👍👍👍👍👍👍thank you. You should get a medal for saving the environment just think how many machines are saved from disposal because of you. Thousands and increasing by the day 😀👍
Great explanation and than you. One thing I would add is that when you got the new replacement part it would have been great to use the multimeter on the new part and show and confirm the circuit to be working before replacing. Thanks again.
Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
This video helped me fix our BEKO that was no longer heating. A quick £16 fix. Thank you very much.
Now this guy knows what is talking about! Nice to see, wish he could fix my dishwasher
Thanks, bought the part from your ebay shop, all working. I messed up the legs as didnt realise you can lower them from the front with a screw driver. Thanks very much
Awesome demonstration. Helped me no end to locate and test my heating element. Unfortunately my heating element is good so the search for the problem continues. Thanks for posting the video!
Many thanks on your video explanation here, just repaired my one with £14.95! Cheers for that!
Glad it helped Thank you For leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thank you for this video. I've removed my heating element as instructed and tested (the element itself appears to have continuity), but the bit in your video i wasn't quite able to follow was where (10:37 onwards) where you diagnose one of the thermostats going open circuit. Where you show us using the spare heater going across the 2 terminals. I cant quite see the points on the element where i am meant to be testing this
Bril. Followed the procedure no problems. A bit fiddley at times. The only annoying thing was when I had removed the faulty heater and checked it with the meter there was continuity. I'm absolutely sure it was open circuit in the dishwasher because I had used the meter and there was no heating during the wash cycle. Next time there are electrical contacts in a suspect device I shall follow the saying "if in doubt give it a clout" first.
Brilliant!
This clip saved my day/week/month :-) How did we survive pre TH-cam?
Do you have a video for possible wiring? As I've changed the heating element and the small thermostat and still no heating. It runs and fills but no heat
Hi. Can you tell me how to test if the turbidity sensor is good or bad. My AEG dishwasher is not heating. I assumed it was the heater but it is testing fine. I assume it is not the PC board as the display is fine. Research suggests the turbidity sensor. I am in Australia. Thanks for your informative videos. Greg
Just had my 18 year machine stop heating while in the wash cycle yet seemed to heat just about enough dry everything. .... nothing wrong with it except the filter and little float needed a good clean... Check the obvious before pulling the machine apart
This man is a pro. He don't play
1800w should have 32 ohms resistance. however combined im getting 16 but 1 of the heater thermostats has browning like yours. , meaning ive problems correct?. in effect circuit is partially open?.
You are the best! Hats off.
I love your scientific approach. Awesome
Very clear. Excellent work
Glad it was helpful! Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Hi, my dishwasher is washing and draining but at the end bringing tap light on and not heating water as well. What can be reason. We changed drain pump and inlet pump 2 month ago.
I would check the heating system. Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
I have Beko dishwasher and I can see that dishwasher is drawing 2000W (flow heater), but only for 1-2min in each cycle. I tried replacing NTC at the bottom, but that did not solve problem. Any idea/suggestion?
I was reading and found this online. "Bleach and bleach-containing cleaners are not recommended, especially if the dishwasher has a stainless steel interior." Why shouldn't you use bleach in dishwashers?
The only thing I can think off is the salt container area. please remember to subscribe as that's is was keeps this channel going. Thanks 👍
I can see he is pure pro , nice vid:)
Realy it's very knowledgeable video thanks sir
Hi, great informative video. Why would a dishwasher overheat? the error code is F7 and in the dishwasher manual, it's saying F7 is overheating. the machine is a bush dishwasher BFSSAE12W
Hi Paul: Have you seen the Slip joint, Corbin pliers from Mac tools ?. I find them much easier to use. Andy
Hello mate do you cover the oxford area I think my heating element on my AEG dishwasher has gone
Thank you so much, my engineer
Great video 👌
Glad you enjoyed @nicholasradwell541 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
@How-to-repair hey Paul how do I order parts from you?
Thank you for your video, sir!
Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Thanks for the great video.
I would like to have seen a close up of wear you were measuring the resistance.
Hi Stephen: Really the only test you need to do is across the 2 pins on the white connector. If your meter shows open circuit or high resistance, then the heater unit is faulty and needs replacing.
RSC Electrical hi, but can there be a case of a good heating element but a faulty thermostat? My dishwasher won't heat so I just unplugged the electrical cables from the heating element and checked the resistance and got around 26ohms for a 2000W element. The circuit board looks OK (no signs of arcing or black marks) so could it be a faulty thermostat? I don't know how to measure that
what could cause dishwasher gets to hot (door gets hot )? is still could be thermostat or turbidity sensor.
Great video, Thanks,
Fantastic video ! Thanks for such a clear explanation!
Warning. These Electrolux dishwashers have now mostly integrated heater inside inverter circuit pump, and if its not heating, problem isnt mostly in the heater, but because no voltage is coming to it from the main control board. (Not the display board on the panel) So check the relay with 9V battery if its contacts are switching but even here isnt mostly problem.
Great advice to the people that read this. Hope you had a good New Year. Please remember to subscribe to the channel as that helps us
glad we could help you @LordCarlSagan this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
So on my multimeter if is says 0.00 v a/c does that mean the heating element is dead
great video
Really glad it helped you fix your problem Thank you for leaving a comment this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
excelent pressentation!!!!!!!!!!!!!!!!
Great video, thank you!
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t
facebook.com/how.to.repair.appliances/
Stay safe
So I have a GE dishwasher and they keep telling me that I don't have a high limit thermostat and I do and I can see it myself so I'm wondering if I can put a generic thermostat in place it's a 180-degree thermostat?
I cannot be 100% on this but I would not recommend it as you do not know what the limit temperature was designed at. please use site when you have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Iam Glad we could help you
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Not as easy as these guys make it look!
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
It's easier taking the back plate off and rear part of the right side
Hi haw ary you dishwashir broblam DLC DWA3320 error F5 thanks
Thank you so much for this video!
My dishwasher drain do not filling with water , it got in and out immediately and after long time it report alarm
Hi, could anyone help ???
I have a dishwasher LBL12A (BRAZIL) but it is W10142826a. She is not warming up. she ends the normal cycle. I tested the resistance is ok. when i run the diagnostics (normal / heated dry (3x) during the process it heats up. what could it be? please !!!!
sorry for delay when you have a technical question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
My washer dryer keeps tripping and blows cold air out and only 6months old from Currys. 3 times in 5month so far
Try getting hold of one of our engineers free of charge on facebook,
we will work through one to one diagnostics and repair of your machine :)
go to our facebook page to book in with paul
facebook.com/how.to.repair.appliances/
I changed the element, worked
For 2 washing cycles and is
Now cold again..
👍👍👍👍
🍀❤️🇵🇹
in situ
Install dishwasher
I will get round to doing one of these at some point @nailsnails2090 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍