You just saved me a ton of money. I'm a sixty year old female and I just fixed my garage door by myself. I cannot believe it. I am so happy. Thank you so very much for this video.
Thank you for the tip. This is exactly what is going on with my garage door opener. I just bought a $250 new set and i will be returning it tomorrow. Thank you
My husband and I watched your video after obtaining a quote for over $600 to fix our garage door that wasn’t opening or closing properly. We wound up buying the part you showed us for $15 and, thanks to your video, were able to fix it ourselves! 🙌 I bought myself a Pumpkin Spice Latte today to celebrate 😂. One note: in our particular case, after replacing just the carriage piece, our garage door functionality improved, but was still not closing as it should. We decided to try lubricating the entire length of the screw-drive channel and that did the trick! (We now realize we should probably have been doing that all along 🙃) Now it works smooth as butter (and operates SO much quieter!) So, don’t be quick to give up if the carriage replacement alone doesn’t fully do the trick for you! Thank you so much again!
I was told I had to replace the entire drive unit because of this issue and given a quote for $1100. Thanks to your video I fixed it for $20. Thank you very much! God bless
I see a future garage door repairman there. Thanks for the videos. Watching these on YT show me that a lot of these door opener issues can be fixed by the homeowner without calling a technician.
Your description and fix nailed my issue. I suspect the weight of my door grew over the years (as the torsion springs gradually grew weaker) and that added "weight" finally overcame and stripped the carriage "threads". I've ordered the replacement carriage ($22 OEM e-bay vendor with free shipping) and will install that upon arrival. In the meantime I'm going to adjust the torsion springs so that they will provide a bit more lift so that the oversized door can be raised with less effort. A little bit more torsion spring lift can reduce the motor strain and the extra lift should reduce the force (weight) of the garage door at the relatively weak carriage threads. I suspect the growing door weight (due to weakening torsion spring tension over the decades) contributed to the failure of my carriage. Great video beginning to end. Well done.
I replaced the carriage and afterwards the door would open, but when closing it would only move about a foot and then stop. I then watched this video and saw you lubing your carriage with silicone spray. I did that and it worked! I had never thought of lubricating it and the video I referred to for installation instructions never mentioned it. Now I know! Thanks!
Thank you so much! the "teeth" part popped out and I had no idea what it is or where it came from. After your video, I am now educated about this and know how to (try) to fix it! THANK YOU!!
Thanks so much Jeffrey - easy fix and headache gone! I've been manually opening/closing my door for months, afraid it was a drive screw our motor issue. Nope - just a trolley replacement! Videos like yours are so valuable! I've subscribed... thanks again!
THANK YOU! Although I could not get the carriage off as easily as you did in your video, my repair with your guidance was a success. I needed to remove sheetrock to get the carriage off the rail and move the rail to the side to get the carriage off, it was so close to the wall. But once I did, the repair was easy-peasy, thanks to you.
This video is now 5 years old, yet the price quoted for the trolley is still just $21. I bought one today on Amazon via the Genie store. The surprising part is that my opener is about 25 years old and has worked perfectly all this time. Thanks for the helpful video.
Thank you very much! I had a feeling the carriage was the problem - just didn't know how to go about replacing it. Looks easy enough so I'll go ahead and get the part ordered so I can get the garage door back in service.
THANK YOU! This is EXACTLY what is happening to my garage door of the exact model! A tip at your own responsibility: Folks, you CAN still open your garage door MANUALLY by pulling the cord gently away from you, when standing in front of it facing the garage door. That will unlatch the carriage and you just lift your garage door!
You Rock! A $20 part was exactly what was wrong with my Garage Door-Thank you for posting such an easy to follow video-Continue the great video advice. Aloha~~~
Jeremy, thank you! Your video was the EXACT solution to the EXACT problem I am having. I ordered my new carriage and I'll install it tomorrow. Thanks again!
Thank you for this video. Today we made the repair, but I would add one thing - our rail was so close to the garage wall that we had to drop the motor to remove the carrier. It is a good idea to make a loop of some romex to hold the motor so you can swing it back a bit to make room to remove the old carrier and install the new one. It was definitely a job for two people because of that complication.
Dude you’re the man my name is Jerry your name is Jerry this was exact problem I had and for 15 bucks it was fixed thanks so much for what you do now my wife is calling me Jerry the fixer
Watched your vid a week ago. Garage has been out of commission since May... lol Replaced the carrier like you did and lubricated everything the white lithium and that special low temp grease. Thing sounds great. Thanks man!
Just fixed mine! Thank you!! Track had to be pulled off to side a bit to clear. Also silicon to scree stopped stopping after first trying again. Great vid!!
Thanks soooo much.....found your video.....EVERYTHING you said worked.....ordered carriage assembly on Amazon...pull pin...13mm socket...2 bolts...teeth were sheared off...2 minutes.....and sooo quiet now...looool
Thanks for the video! We hired someone a few years ago to do this. That carriage is needing replaced. I’m doing it myself after watching! Looks like we have similar helpers too. 👍
Thanks a million for the video! One of my doors just had this issue. Ordered the part and just replaced it! She’s like new! Only ruined a $50 sweatshirt with grease 🤦🏻♂️
That’s great (but not the sweatshirt part), glad I could help. I’ve ruined plenty of shirts over the years. I guess it just comes with the territory of fixing. Thanks for watching! Please consider subscribing if you like these kinds of videos.
Wow, thank you this worked great and the part with the link you gave worked perfectly and so convenient. The part was $18 and the local garage door company wanted to charge me over $500. It only took me 10 minutes thanks to your great video.
Well done! This solves the mystery, thank you! On a personal note, I noticed you invited and encouraged your son to "help you fix it", you is prepared to help with his pliers, but the very next minute you removed him from the ladder where he was going to help? Follow through means a lot...❤
Awesome man, thanks for the video. I ordered my screw drive, arrived next day, went with the genie lube though, (3pack). Fixed it in literally 5min. Didn’t have to take the two rail screws out on my, I had enough clearance on mine to slide past it. Thumbs up
Thanks, you saved our bacon!! Great video! And adorable lil guy with you. We had never owned a garage door before now. Somehow something hard in the corner of the garage feel just as the door was closing...and we were leaving. I didn't wait to see it closed all the way, but drove off. Apparently, about halfway down it caught the object and broke the carriage piece off the rail instead of stopping and going back up. Thanks to your video and Amazon, we're back in business. Also, before this event, the door was pretty noisy, rattley, and now it's smooth as silk.
I understand how to replace the carriage, what I need to know is how to prevent stripping the threads on the carriage. Is it possible to have too much lubrication? The carriage hits something at the first screw coupling on the way up and wears the threads out on the carriage. This is my third replacement in six months. Can you please help me figure out the carriage failure?
I had the same problem. Called my dad and he was no help. Thanks for the video! As I started working on it, my three-year-old was climbing up the ladder to help. Sound familiar?
Thank you! I can't believe I went three months lifting my garage door manually when you showed how easy it was to fix. I'll be sure to subscribe to your feed.
I had the same experience and after watching the video I ordered the screw drive clip and was able to fix the problem. Thank you for sharing the video and saving me some money, the garage door technicians were charging me a lot of money to fix the garage door.
Finally fixed! I was directed to another video that had a solution to a similar problem but it involved switching out a coupler - that did not work and I gave up hope. I found this video by pure luck and it was simple and easy to fix. Thank you so much
Great. I noticed that my thread shaft has two spots where there is a little space in the shaft threads, about 1 inch. Those two spots are where the door will get stuck. When it hits the first one I'm able to push it up past it, then it will grind again at the second space. I think the spaces are where the thread shaft sections get put together. I expect to find exactly what you showed, where there is enough trolley thread to get it going but when it hits that space it does not have enough thread to get past it. I thought I would have to replace the whole rod, then I thought, maybe there is something wrong in the trolley and found your video. Ordering a replacement now.
Thanks for sharing this! I'm a first time home owner, never seen a garage door opener in my life... with the door open, I saw the big red string hanging and thought, "does pulling this close the door?" ... it sure did, the whole weight of the door came crashing down and ripped the carriage off the track because I was still holding the string.. I hope I can fix it just as easily lol
Your door shouldn’t come crashing down. Since it did, you likely have an issue with the spring tension. There are two giant springs just above the door. They essential help the opener lift the door. It also keeps it from doing exactly what yours did. I suspect the springs are broken, or they need adjusted. Very dangerous what happened to your door
Helpful vid in case that part goes kaput. My door has a loose track that moves up and down when the door closes. BUT...got to see how it should be with your vid...thank you!! Btw...your boy reminds me of my son at that age. Love and enjoy him! Mine now is 15 and is always saying “that’s what she said”. Oh to go back!!
Lol.. it’s crazy how quickly they grow up. The days are long but the years are quick as they say. Thanks for watching the video. I’m planning on pulling the whole track assembly apart in a future video and clean it. Be sure to subscribe if you haven’t already, so you don’t miss it!
@@IAmAFixer I lubed the track and sprayed it with spray graphite. Then a torsion spring broke followed by the carriage wearing out and now I'm a graduate of garage door owner class. Thanks for the vid, it illustrates what I read. Genie has the part for 19.99 + tax, free shipping. Deal that they support my 35y.o.+ opener. There is an aftermarket part that's cheaper, but I wonder if it's a false economy....
Wow! Thank you sooo much. Our garage door is doing the same thing. We hired a garage door repairman and he Charged us $270 dollars to replace the rollers (old ones were fine) and to grease it up. Stopped working the next day same problem. I'm furious! We need more people like you sir. I have an old genie not sure of the model an the moment. Are the parts the same you think?
Thanks, Alex. It’s hard to say if they’re the same. The part would look significantly different than mine if it was. If it looks the same, it probably is.
Somebody already mentioned door balance, which should be a first step in checking any opener problems, even if the problem seems unrelated. I actually am having a tough time from the color, but it looks like those springs may have been galvanized at one time. If that is the case, they are mostly likely weak and either need to be tightened or replaced. Also, the spring anchor is upside down, which, I guess doesn't matter of the door clears, but that's why it is supposed to face the other way, it's built that way to offer more clearance for the door. I see there is some reinforcement for the door bracket, but from all the holes in the vertical struts, it does not seem adequate. You might want too look into beefing that up before you end up with even more holes. Helluva door you got there, tho, must be in a hurricane area.
It is hurricane area. It was actually a result of my wife pulling the manual release half way when we had a power outage. Then when the power came back on, it stripped out the grooves of the carrier. No other issues. Been working great for 10 years and since replacing the carrier. Thanks for the tips though, someone may see them and get some useful help out of them.
ON my 10 year old unit what was grinding down the teeth on the carriage was the joint on the screw drive..a collar was missing...new collar would not stay in place...so assuming that the new carriage would eventually grind down..I bought several carriages until I can replace opener....nice vid...
Thanks for your video. I had a bad limiter switch at the door up position that I replaced and it messed up my carrier i believe but also messed up the connector bushing at motor to the screw drive. Works great now! Best to use garage door opener grease on the carrier. and lube the screw drive real good. Thanks for the video Mr. Fixer!!
I replaced carriage a few months back and it's making lots of noise again. So before I put on the new replacement am I going to need new lift springs? The 16' insulated door is used quite a bit and inspecting it moments ago the springs look undersized. But I''m no expert.
Thank you so much Jeremy. I'LL get on your link and purchase one right now. Loved seeing your boy helping you !! So cute !! BLESSINGS AND HAPPY NEW YEARS !!!!!!!
Thanks for posting. My opener behaved exactly as shown at start of this vid. Ordered/installed new carriage. Now screw turns ONLY when carriage is disengaged. Did I miss a step? Any thoughts? Anyone? Thanks.
The worn down carriage teeth can also cause a BANGING noise as the opener pulls the door up. The noise happens twice, as the carriage moves between the sections of the screw; three sections, two connections. So if your opener BANGS twice on it's way up, check the carriage's teeth.
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
Thank you! Installed in ten minutes. Works perfectly! Saved me $400!! $20 part, 10 min install.
Awesome! Glad it helped you out.
You just saved me a ton of money. I'm a sixty year old female and I just fixed my garage door by myself. I cannot believe it. I am so happy. Thank you so very much for this video.
Thank you for the tip. This is exactly what is going on with my garage door opener. I just bought a $250 new set and i will be returning it tomorrow. Thank you
Glad it helped, thanks for watching!
My husband and I watched your video after obtaining a quote for over $600 to fix our garage door that wasn’t opening or closing properly.
We wound up buying the part you showed us for $15 and, thanks to your video, were able to fix it ourselves! 🙌 I bought myself a Pumpkin Spice Latte today to celebrate 😂.
One note: in our particular case, after replacing just the carriage piece, our garage door functionality improved, but was still not closing as it should. We decided to try lubricating the entire length of the screw-drive channel and that did the trick! (We now realize we should probably have been doing that all along 🙃) Now it works smooth as butter (and operates SO much quieter!) So, don’t be quick to give up if the carriage replacement alone doesn’t fully do the trick for you!
Thank you so much again!
I was told I had to replace the entire drive unit because of this issue and given a quote for $1100. Thanks to your video I fixed it for $20. Thank you very much! God bless
Glad it helped you out!
You are a life saver, wife called a guy wanted $300 to replace everything. $20 and 15 minutes later it was good as new.
That’s great, Arturo. I’m glad it saved you some money. Thanks for watching!
I see a future garage door repairman there. Thanks for the videos. Watching these on YT show me that a lot of these door opener issues can be fixed by the homeowner without calling a technician.
I have the same problem, the repair guy told me that I need to install a whole new set. Now I can DIY. Excellent video thanks
Came across this video and it is still relevant. Thank you! Saved me $300 +!
This is the good side of the internet. You have saved me a ton of money. I have ordered the part and lube which will arrive tomorrow. Thanks!
Glad it helped you out. Thanks for watching! Let me know how it goes.
Buddy, is quite the helper! Thanks for the video, you saved me from hunting down the instructions manual.
You got it! He is a pretty good helper!
Your description and fix nailed my issue. I suspect the weight of my door grew over the years (as the torsion springs gradually grew weaker) and that added "weight" finally overcame and stripped the carriage "threads". I've ordered the replacement carriage ($22 OEM e-bay vendor with free shipping) and will install that upon arrival. In the meantime I'm going to adjust the torsion springs so that they will provide a bit more lift so that the oversized door can be raised with less effort. A little bit more torsion spring lift can reduce the motor strain and the extra lift should reduce the force (weight) of the garage door at the relatively weak carriage threads. I suspect the growing door weight (due to weakening torsion spring tension over the decades) contributed to the failure of my carriage. Great video beginning to end. Well done.
I replaced the carriage and afterwards the door would open, but when closing it would only move about a foot and then stop. I then watched this video and saw you lubing your carriage with silicone spray. I did that and it worked! I had never thought of lubricating it and the video I referred to for installation instructions never mentioned it. Now I know! Thanks!
That’s great. Glad it helped you out!
Thank you so much! the "teeth" part popped out and I had no idea what it is or where it came from. After your video, I am now educated about this and know how to (try) to fix it! THANK YOU!!
You got it. Thanks for watching!
Nice job! Love the little assistant. He will absorb everything that you can teach him. God bless you all.
Thanks Robert! We’re having a birthday party for him today. Crazy how fast they grow up. The days are long, but the years are fast, as they say.
Thanks so much Jeffrey - easy fix and headache gone! I've been manually opening/closing my door for months, afraid it was a drive screw our motor issue. Nope - just a trolley replacement! Videos like yours are so valuable! I've subscribed... thanks again!
Thanks, I’m glad it helped you out.
THANK YOU! Although I could not get the carriage off as easily as you did in your video, my repair with your guidance was a success. I needed to remove sheetrock to get the carriage off the rail and move the rail to the side to get the carriage off, it was so close to the wall. But once I did, the repair was easy-peasy, thanks to you.
That’s great, Brad, thanks for watching!
This video is now 5 years old, yet the price quoted for the trolley is still just $21. I bought one today on Amazon via the Genie store. The surprising part is that my opener is about 25 years old and has worked perfectly all this time. Thanks for the helpful video.
Thank you Jeremy we really appreciate the video you are definitely the Fixer.
Awesome! My opener just started to have this exact problem. Envisioned replacing the entire thing - nope! Thank you so much for posting this!!
Thank you very much! I had a feeling the carriage was the problem - just didn't know how to go about replacing it. Looks easy enough so I'll go ahead and get the part ordered so I can get the garage door back in service.
Good deal!-
Easy job. Ordered the carriage from Genie and it was a 10 minute fix - and I didn't even have a little helper. :-) Thanks for the video!
You bet! Thanks for watching. Glad it helped!
Thanks man, my garage door has been doing this and driving me nuts. I was about to call for a repair and you just saved me. 💪🏻
THANK YOU! This is EXACTLY what is happening to my garage door of the exact model! A tip at your own responsibility: Folks, you CAN still open your garage door MANUALLY by pulling the cord gently away from you, when standing in front of it facing the garage door. That will unlatch the carriage and you just lift your garage door!
You Rock! A $20 part was exactly what was wrong with my Garage Door-Thank you for posting such an easy to follow video-Continue the great video advice. Aloha~~~
Glad it helped. Thanks for watching!
Jeremy, thank you! Your video was the EXACT solution to the EXACT problem I am having. I ordered my new carriage and I'll install it tomorrow. Thanks again!
FYI, I installed it with no problems. Very easy.
Thanks a bunch. My symptoms are similar. I am going to pull my Genie carriage tomorrow and examine it for excessive wear.
Let me know how it goes!
Thank you Jeremy for sharing your knowledge and experience 🙏 which saves us a lot of money God bless your heart and your family 🙏
Thank you! Our Genie garage door opener is operational again all thanks to your video and advice! Again thanks!
That’s great, glad I could help. Thanks for watching!
Thank you for this video. Today we made the repair, but I would add one thing - our rail was so close to the garage wall that we had to drop the motor to remove the carrier. It is a good idea to make a loop of some romex to hold the motor so you can swing it back a bit to make room to remove the old carrier and install the new one. It was definitely a job for two people because of that complication.
Dude you’re the man my name is Jerry your name is Jerry this was exact problem I had and for 15 bucks it was fixed thanks so much for what you do now my wife is calling me Jerry the fixer
Watched your vid a week ago. Garage has been out of commission since May... lol
Replaced the carrier like you did and lubricated everything the white lithium and that special low temp grease.
Thing sounds great. Thanks man!
Just fixed mine! Thank you!! Track had to be pulled off to side a bit to clear. Also silicon to scree stopped stopping after first trying again. Great vid!!
thanks for putting the link in the description. it saved me a bunch of time.
You’re welcome. Thanks for watching!
Thanks soooo much.....found your video.....EVERYTHING you said worked.....ordered carriage assembly on Amazon...pull pin...13mm socket...2 bolts...teeth were sheared off...2 minutes.....and sooo quiet now...looool
Fantastic! I’m glad it helped. Thanks for watching and consider subscribing if you like these kinds of videos
This is exactly what mine is doing. You are brilliant! Thank you.
Dude!!! You made my morning chore ridiculously quick and easy.... Even had the link to the part. You rock. Thank you!!!!!!!!!!
Mark Braverman thanks! Glad it helped you out.
Thanks for the video! We hired someone a few years ago to do this. That carriage is needing replaced. I’m doing it myself after watching! Looks like we have similar helpers too. 👍
Very cool! Glad it helped you out. Helpers are great! Thanks for watching!
Thanks a million for the video! One of my doors just had this issue. Ordered the part and just replaced it! She’s like new! Only ruined a $50 sweatshirt with grease 🤦🏻♂️
That’s great (but not the sweatshirt part), glad I could help. I’ve ruined plenty of shirts over the years. I guess it just comes with the territory of fixing. Thanks for watching! Please consider subscribing if you like these kinds of videos.
Thank you, this video saved me from spending a couple hundred dollars on a new garage door opener. I spent $23 instead of $200-$300.
Glad it helped you out!
Thank you so much. This is my exact problem I ordered my $19 Carriage from Amazon already thinking it was the problem
Glad to help!
This video is very helpful for those who has Genie garage door opener
Thank you
Thanks for watching, I’m glad it helped you out!
Wow, thank you this worked great and the part with the link you gave worked perfectly and so convenient. The part was $18 and the local garage door company wanted to charge me over $500. It only took me 10 minutes thanks to your great video.
You're welcome, glad it helped you out! If you don't mind, like the video (helps out a lot), and subscribe if you like these types of videos.
You are a lifesaver! Thank you so much for recording this and sharing it!!!
Glad I could help!
Thank you. I suspected my carrier but your video confirmed it.
Glad I could help!
Great video and I thought it may of been the screw drive that mounted in the motor instead of the part on the end . Thanks
Great video thanks. And God bless the little fellow helping you.
Thank you. This is exactly what is going on with my garage door. Too much work to change it though. Will need to hire someone to do it for me.
Well done! This solves the mystery, thank you! On a personal note, I noticed you invited and encouraged your son to "help you fix it", you is prepared to help with his pliers, but the very next minute you removed him from the ladder where he was going to help? Follow through means a lot...❤
YOU AND THAT BIG GUY IS A LIFE SAVER 🙏🏾
Thanks for the fix. Got mine up and running yesterday.
Glad it helped you out! Thanks for watching.
Amazing, thanks for making the video, Gary the fixer!
You’re the man that inspired me to fixed our home garage..I did it in one strike!!!😎thanks for your inspiring video..God bless your family circle
That’s so awesome! Thanks for sharing. These types of comments keep me going. Glad it helped you out. Thanks for watching!
Thank you for the instructions works perfect again I thought I was going to have to buy a new garage door opener thank you very much
Awesome!
Great video. Pretty sure this was my issue after watching about 10 other vids. Parts ordered. Thanks!
Glad to help. Thanks for watching!
Awesome man, thanks for the video. I ordered my screw drive, arrived next day, went with the genie lube though, (3pack). Fixed it in literally 5min. Didn’t have to take the two rail screws out on my, I had enough clearance on mine to slide past it. Thumbs up
That’s great, Kyle! Thanks for watching!
Thank you so much for this video - I was able to get the carriage piece off easily to investigate - if the $16 part fixes it I'm going to be ecstatic!
Thanks, you saved our bacon!! Great video! And adorable lil guy with you. We had never owned a garage door before now. Somehow something hard in the corner of the garage feel just as the door was closing...and we were leaving. I didn't wait to see it closed all the way, but drove off. Apparently, about halfway down it caught the object and broke the carriage piece off the rail instead of stopping and going back up. Thanks to your video and Amazon, we're back in business. Also, before this event, the door was pretty noisy, rattley, and now it's smooth as silk.
That’s great, Teri, thanks for sharing! I’m glad the video helped you out.
I understand how to replace the carriage, what I need to know is how to prevent stripping the threads on the carriage. Is it possible to have too much lubrication? The carriage hits something at the first screw coupling on the way up and wears the threads out on the carriage. This is my third replacement in six months. Can you please help me figure out the carriage failure?
I had the same problem. Called my dad and he was no help. Thanks for the video! As I started working on it, my three-year-old was climbing up the ladder to help. Sound familiar?
Thank you! (of course, we all loved your little boy’s helping)
You’re welcome. Thanks for watching!
Thank you very much …! You save me some money and stress..! Very well explained, God bless you.
Thank you! I can't believe I went three months lifting my garage door manually when you showed how easy it was to fix. I'll be sure to subscribe to your feed.
You’re welcome, Jeffrey, glad it helped you. And thanks, I’d love to have you as a subscriber. Have a great weekend!
I had the same experience and after watching the video I ordered the screw drive clip and was able to fix the problem. Thank you for sharing the video and saving me some money, the garage door technicians were charging me a lot of money to fix the garage door.
You got it Jose, thanks for watching!
Finally fixed! I was directed to another video that had a solution to a similar problem but it involved switching out a coupler - that did not work and I gave up hope. I found this video by pure luck and it was simple and easy to fix. Thank you so much
That’s great, I’m glad you found it! Thanks for watching!
Great. I noticed that my thread shaft has two spots where there is a little space in the shaft threads, about 1 inch. Those two spots are where the door will get stuck. When it hits the first one I'm able to push it up past it, then it will grind again at the second space. I think the spaces are where the thread shaft sections get put together. I expect to find exactly what you showed, where there is enough trolley thread to get it going but when it hits that space it does not have enough thread to get past it. I thought I would have to replace the whole rod, then I thought, maybe there is something wrong in the trolley and found your video. Ordering a replacement now.
Thank you for the great advice! This was exactly my problem with my door, and a $20 part did the trick!
That’s great, Kevin! Glad it helped you out.
Thanks for sharing this! I'm a first time home owner, never seen a garage door opener in my life... with the door open, I saw the big red string hanging and thought, "does pulling this close the door?" ... it sure did, the whole weight of the door came crashing down and ripped the carriage off the track because I was still holding the string.. I hope I can fix it just as easily lol
Your door shouldn’t come crashing down. Since it did, you likely have an issue with the spring tension. There are two giant springs just above the door. They essential help the opener lift the door. It also keeps it from doing exactly what yours did. I suspect the springs are broken, or they need adjusted. Very dangerous what happened to your door
Exactly what I needed! And so glad for the co-star - my home projects usually have a small set of hands helping.
Glad it helped you out! My little guy is a good helper... most of the time 😁
Thanks! Exactly the same issue. Your video made the $20 part fix simple!
Thanks, Erik. I’m glad it helped you out.
Thank you for the video! I was able to fix my garage door for less than 30$.
Helpful vid in case that part goes kaput. My door has a loose track that moves up and down when the door closes. BUT...got to see how it should be with your vid...thank you!!
Btw...your boy reminds me of my son at that age. Love and enjoy him! Mine now is 15 and is always saying “that’s what she said”. Oh to go back!!
Lol.. it’s crazy how quickly they grow up. The days are long but the years are quick as they say. Thanks for watching the video. I’m planning on pulling the whole track assembly apart in a future video and clean it. Be sure to subscribe if you haven’t already, so you don’t miss it!
@@IAmAFixer I lubed the track and sprayed it with spray graphite. Then a torsion spring broke followed by the carriage wearing out and now I'm a graduate of garage door owner class. Thanks for the vid, it illustrates what I read. Genie has the part for 19.99 + tax, free shipping. Deal that they support my 35y.o.+ opener. There is an aftermarket part that's cheaper, but I wonder if it's a false economy....
🤷♂️glad it helped you out. Thanks for watching
Good man. Thank you. Simple clear and useful. A box of nitrile gloves might come in handy.
Thank you for the tutorial. I just ordered from Amazon.
Wow! Thank you sooo much. Our garage door is doing the same thing. We hired a garage door repairman and he Charged us $270 dollars to replace the rollers (old ones were fine) and to grease it up. Stopped working the next day same problem. I'm furious! We need more people like you sir. I have an old genie not sure of the model an the moment. Are the parts the same you think?
Thanks, Alex. It’s hard to say if they’re the same. The part would look significantly different than mine if it was. If it looks the same, it probably is.
Thanks Jeremy you just saved me 200 bucks!!!
THIS IS GREAT VIDEO! I was having the same problem now I know how to fix it thanks so so very much for wonderful information
You’re welcome, glad I could help!
what a nice video. Thank you, you made my day. because of your video, I am able to fix my garage problem. Thank you my friend.
Glad I could help! Thanks for watching!
Your son is a great help😀
He’s a character
Somebody already mentioned door balance, which should be a first step in checking any opener problems, even if the problem seems unrelated. I actually am having a tough time from the color, but it looks like those springs may have been galvanized at one time. If that is the case, they are mostly likely weak and either need to be tightened or replaced.
Also, the spring anchor is upside down, which, I guess doesn't matter of the door clears, but that's why it is supposed to face the other way, it's built that way to offer more clearance for the door.
I see there is some reinforcement for the door bracket, but from all the holes in the vertical struts, it does not seem adequate. You might want too look into beefing that up before you end up with even more holes.
Helluva door you got there, tho, must be in a hurricane area.
It is hurricane area. It was actually a result of my wife pulling the manual release half way when we had a power outage. Then when the power came back on, it stripped out the grooves of the carrier. No other issues. Been working great for 10 years and since replacing the carrier. Thanks for the tips though, someone may see them and get some useful help out of them.
Thanks for this bro. Sure glad I found your channel before I tore into my Genie motor housing. Sure wish I had a helper like you do too. Subscribed.
Thank you so much! Fixing my genie garage now 😁
Garage just started to do this exact thing! Thanks for posting this video 🔥
You got it. Thanks for watching!
Good work! Can you show us how to make the thing less noisy?
Exactly what I needed. Ordered and fixing soon!
ON my 10 year old unit what was grinding down the teeth on the carriage was the joint on the screw drive..a collar was missing...new collar would not stay in place...so assuming that the new carriage would eventually grind down..I bought several carriages until I can replace opener....nice vid...
Thanks Phil, and thanks for the info. I’m sure it will help someone. Thanks for watching!
Thank you! This video helped me fix my garage door!
You’re welcome, glad it helped.
Thanks for your video. I had a bad limiter switch at the door up position that I replaced and it messed up my carrier i believe but also messed up the connector bushing at motor to the screw drive. Works great now! Best to use garage door opener grease on the carrier.
and lube the screw drive real good. Thanks for the video Mr. Fixer!!
That’s great, I’m glad it helped you! Thanks for watching!
Good Job Easy fix. Great little helper you got there too.
Thank you Jeremy. I have the same kind of garage door opener screw assembly. I will order the part and hopefully it'll work.
You’re welcome. Glad u could help!
Awesome video! Thank you! Saved me an expensive service call.
I replaced carriage a few months back and it's making lots of noise again. So before I put on the new replacement am I going to need new lift springs? The 16' insulated door is used quite a bit and inspecting it moments ago the springs look undersized. But I''m no expert.
Turned out the be a very easy repair thanks to the video. Thanks.
Yessir! Glad it helped you out.
Thks - Made 1 hour troubleshooting a YT search + half hour part search a click...
Glad to help, thanks for watching!
Thanks. This was exactly what I needed.
Thank you for the video. Very helpful.
You’re welcome!
Great video. Now I know what how to fix it.
Thanks, glad I could help! Let me know how it goes.
You’re awesome, thought I needed a new garage door opener, thanks for the video!
You got it! Glad I could help and thanks for watching!
Thank you so much Jeremy. I'LL get on your link and purchase one right now. Loved seeing your boy helping you !! So cute !! BLESSINGS AND HAPPY NEW YEARS !!!!!!!
Thanks, John! I’m glad I could help. He’s my best little helper and we’re truly blessed.
Thanks for posting. My opener behaved exactly as shown at start of this vid. Ordered/installed new carriage. Now screw turns ONLY when carriage is disengaged. Did I miss a step? Any thoughts? Anyone? Thanks.
The worn down carriage teeth can also cause a BANGING noise as the opener pulls the door up. The noise happens twice, as the carriage moves between the sections of the screw; three sections, two connections. So if your opener BANGS twice on it's way up, check the carriage's teeth.
Great info, thanks for sharing!
Hello I have the same problem actually ok where are you located. In what city?