Most of the prices are hilariously high, but I still love watching these to give me fabrication ideas for DIY clones. A reasonable one is the parking protectors. I've nearly lost both mirrors without them over decades. I recently bought a Vevor retractable air hose reel which I truly love. $68. Maybe the ret ext cord is next. The only high-but-reasonable price is $7,400 for the UL-300 lift and frame repair bench, which will pay for itself. Any skateboard could be used to lift a car or truck wheel, saving $150. One can make a morphable creeper, wrench extender, wheel roller, for pennies on the dollar.
Welcome to the first world. Please watch your orientation video (Idiocracy) and then report to your local government facility to receive a towel and a pat on the back before you released into the wild and left on your own.
Not only that, but pretty sure disconnecting your radiator just to flush it out with a compressor powered water hose attachment isn't the greatest thing, either. Feel like you'd risk airlocking the coolant loop if everything isn't properly flushed and refilled....
Seems like everybody is just stealing inventions from the past, in every video I see at least 2 inventions that I saw my grandfather use and were passed down to me. Such as the wrench lengthening devise in this video so far.
@sneezinhatch yeah, my grandad owned a tire shop, he had two of those. Those went to my cousins, I got some of his other tools. I would like to buy one but only get glimpses at estate sells.
7:09 Waste of money. just use your foot. Roll the tire off-center to the hub, put your foot down, roll the tire onto your foot. It's not rocket science.
ul-300 is how many thousands too much?? its the 1st thing that seems useful. then the next 3t but its not lifting the whole thing... i can lift a 5 tone car, on 1 corner only, just like this junk
Most of the prices are hilariously high, but I still love watching these to give me fabrication ideas for DIY clones.
A reasonable one is the parking protectors. I've nearly lost both mirrors without them over decades.
I recently bought a Vevor retractable air hose reel which I truly love. $68. Maybe the ret ext cord is next.
The only high-but-reasonable price is $7,400 for the UL-300 lift and frame repair bench, which will pay for itself.
Any skateboard could be used to lift a car or truck wheel, saving $150.
One can make a morphable creeper, wrench extender, wheel roller, for pennies on the dollar.
The Trac is a good idea but, $150 +tax USD is hilarious, I'm off to the workshop to make it myself!
Or just use a crowbar
Or use a skateboard.
A lot of these are solutions to problems that don’t exist!
Welcome to the first world.
Please watch your orientation video (Idiocracy) and then report to your local government facility to receive a towel and a pat on the back before you released into the wild and left on your own.
Wow! And to think I never even knew I needed any of that. My life is now cast into a whirl of hopelessness.
Wow, lots of solutions to non-problems. First tool = another box end wrench.
Thanks for also giving measurements in Freedom Units.
You can use a pipe for 10 bucks or less to get leverage u need.
Or use another wrench… who ‘hammers’ on their wrenches anyhow?
or put another box end into the original wrenches open end.
I’ve had one of those wrench extenders for years, they’re great.
Insects don’t get inside a vehicles radiator.
Not only that, but pretty sure disconnecting your radiator just to flush it out with a compressor powered water hose attachment isn't the greatest thing, either. Feel like you'd risk airlocking the coolant loop if everything isn't properly flushed and refilled....
I use the Brake Fluid tester every 6 months to test all my cars - works well.
I just test my brakes every time I drive
Great video! I love using a tool like the VEVOR extension cord reel; it keeps everything tidy in my garage.
Is this American dollars or Canadian as everything is reported in metric measurements?
That 240Z though!
Aussie channel or just a Super Cheap Auto Sponcership?
Everything was cool in the video, but the prices are way out of line.
Thank Biden
Low voltage doesn't mean cheap to run 10w is 10w @ 12v or @ 120v or even @ 240v meanig regardless of voltage it would cost the same to operate
Trac Tire Jack is $150? No way.
$625 for the Ergochair..... I'll keep using layers of cardboard on the ground thanks ;) Who needs comfort when you're working on a car...lol
Hello, I haven't received your programs automatically for a while👍
A wrench isn't designed to be used with an extender.
Thank you
Seems like everybody is just stealing inventions from the past, in every video I see at least 2 inventions that I saw my grandfather use and were passed down to me. Such as the wrench lengthening devise in this video so far.
Yep! Nearly all that stuff is a case of reinventing the wheel, again! LOL
I still use my 2 air jacks that look like a utility dolly with long arms each can lift 8k
@sneezinhatch yeah, my grandad owned a tire shop, he had two of those. Those went to my cousins, I got some of his other tools. I would like to buy one but only get glimpses at estate sells.
Or.... you can just use a second, larger wrench to do the same thing
@ryanc3219 I personally like my 24 inch 2 inch pipe. I just have a bunch of tools from the 40s and 50s my grandfather left me.
👍👍👍👍👍👍👍👍👍
All the stuff I didn’t know I didn’t need
I think the ramps at 3:22 you said the less parts the better. There is another saying "KISS - Keep it simple stupid"
3:41 Is that for blind people?
7:09 Waste of money. just use your foot. Roll the tire off-center to the hub, put your foot down, roll the tire onto your foot. It's not rocket science.
i just saw one continuous ad, where was content
lool tell me you dont have a clue what a product is but still make a video on it
TY T.Z first
ul-300 is how many thousands too much?? its the 1st thing that seems useful. then the next 3t but its not lifting the whole thing... i can lift a 5 tone car, on 1 corner only, just like this junk
That coolant flush tool tho
Worthless video without any links
nice 🛞🛻👨🔧🛞