@@nasimahmed3356 don't clear or paint up to a hard tape line. There's ways to make it soft. It's hard for me to answer cause I don't know the situation. Are you referring to base coat or clear?
Great video, to the point leaving the viewers on the edge of our seats in anticipation. Thanks for continuing education, knowledge truly is power. Peace out.
I like how you speak about keeping the repair small very important I use to make these mistakes also I like the roberlo filler must try it one day thank you for the video stay safe
Alot of the things I do come second nature to me cause I've been doing it so long. So creating these videos has really forced me to dissect all the steps in order to make a helpful video. Still working on that ,thanks for the comment!
Just found your channel and noticed you actually reply to all comments that had questions, thats a rarity in itself . Bravo my hats off to you . Enjoyed video learning alot in the videos appreciate what you do ,how you speak it and explain what you are doing . Keep up the awesome videos .
you got alot of patients lol sanding with 180. I would use 100 on a light filler like that. other times 80 grit on very heavy bodywork. I finish my bodywork in 320 and prime. sand the primer with 400 and use a light sealer sometimes depending on the job.
Great video! I’ve always had a hard time getting the filler perfect. A friend of mine used to have me close my eyes in between sanding. When I moved my hand over the fresh sanded area, It was easier to feel the hi and low spots.
What is the orbiting size of the orbital sander your using? Thank you for all the great videos, new guys in the industry like me are super grateful for all the information.
I would just knock it out from the inside remove the wheel liner and hammer and dolly away, lol sometimes I hate using the stud guns. the guns are too heavy and the one you have.. it is good but for dings or if you got like 30 minutes of time to pull out. when i do bodywork i try to get it into bondo as fast as possible
Yes, it is true for speed I use a different process. I don't want to teach that for beginners. Maybe I should make some videos using different techniques for more experienced technician's
Lol, you got me crackin up! I indeed was wearing a "pimp chain" 🤣🤣. I was forced to retire it due to backlash from my daughters. Lol, have a good one Thanks for the laugh
Hello instructor by the grace of lord I'm too spray paint from Pakistan now working here in saudia Arabia so i have to some questions from you first of Fall kindly may i know that where you from who made a reaper car means auto panter
Hey there, I have a old steel horse trailer that's dented a little and rusted. I plan on painting it myself. You think I can pot filler on the small dents, sand the rust and paint it without taking all of the old paint off?
Depends what your looking for. If your just wanting to clean it up then yes that would work fine . You may consider shooting a sealer over it before you paint.
Sure, if your concerned about adhesion this is a good one . Inexpensive and wrks well. I will sometimes use a thin coat of glaze to finish with. Here's the link amzn.to/3VatZ9g If you ever are looking for products I use there's a Amazon storefront link in the description of all my video's as well. Appreciate the support!
Good question! Remember if you replace the fender now you need to blend the color into the door and the hood . You would Also need to remove trim on that door to do it properly. So just repairing the fender in this case saves time and materials. Appreciate the support brother!
When it's straight with the rest on the panel. Use guide coat it helps to ensure the panel is level. Check out some of my other body filler video's I think it will be helpful. Appreciate the comment and support
So about 10 minutes between coats of primer but always check manufacturer's recommendations. After the primer is dry and sandable then your ok to paint.
Because of body filler? Body filler is really high quality stuff these days it's not like when it first came out. There won't be any problems with cracking . Don't be afraid of using filler. The only problem is when people miss use it by applying it way too thick.
@@GarageNoise Yes,i tought on body filler. Just asking because service repair my door with body filer but i wanted to get new doors. I hope it doesnt crack 🤞 Thanks.
Whats your opinion on bondo?? Its the cheapest right? I worked with it but i honestly thought all fillers were hard to work with like bondo whats your opinion?
The bondo brand it's been a long time since I used it. The best cheap body filler I've ever used is R1 it's made by a subsidiary of Roberlo. Evercoat make good filler. You want good filer if you have alot of body work. There's a big difference in how a quality filler sands. It's much easier . Gallon will be about 50-60 bucks but it's worth it. Rage ultra is my go to right now.
@@GarageNoise i was about to fix some rust spots and almost got bondo till i did some more reasearch and this roberlo works wayyy cleaner and easier than the bondo i hated it for a spray or some that stops rust after cleaning inside and out as good as possible what so you recommend rusteuleum? Por15?
@@rodolfogiles8055 rust spots where? I use por15 on chassis and it's great stuff inside body panels cavity wax or rust inhibitor like ospho it's not as heavy and kills the rust . Check out tomorrows video repairing rust on the bottom of a door.
@@GarageNoise rust spot on wheel well around dodge charger and close the rear bumper do you have an email so i can send you pics and see what youbrecommend for this application im in Illinois so rust is bad out here
Haven't watched all your videos yet but am learning so much and considering painting my own truck what I once thought was not even conceivable! Maybe you have already discussed this but would like to know what affordable moisture/oil separator you recommend for a DIY'er like myself? Thank you!
Paint your truck! You can do it! If you have any questions along the way just let me know. I haven't found a reasonable priced water/ oil separator I can recommend I'm looking for a new one myself but If I find one I will put it on the channel. Thanks for watching and the comment.
Wow...really though !!? 🤔 I'd like to see that....possible maybe, but 15 mins... seriously!! 28 years in the trade and I feel so inept now because you like to lie on TH-cam 😂😂 stop !!
@@dbuckley100 lmfao bud !!!! I also have some years in the trade been slinging mud and pulling frames from heavy hits for a bit over 2 decades. Although the plastic he's using is pretty decent and easy enough sand
Why wait until filler is mixed before masking alway do all prep first and why not cover wheel to keep dust from calliper etc If you are telling us about a repair keep to facts not tell us about the make of filler stay on message
I know an idiot who does and then complains his compressor tank is to small to handle painting jobs. He has a 20 gallon husky. I told him too much psi turn it down. He laughed at me. 😆 what an idiot. I just wanted to make sure I wasn't crazy, thanks.
Could've had that back to the customer, in brand new condition in 10-15 minutes , with that one blue handled tool. PDR . Crazy someone would want to repaint thier vehicle and lose all that value , when that dent was beginner level PDR!
Howdy, howdy have questions? leave them in the comments and I'll be happy to answer!
How do i get rid off hard edges on paint? Taped around the area i was painting only to then be given hard edges due the the tape
@@nasimahmed3356 don't clear or paint up to a hard tape line. There's ways to make it soft. It's hard for me to answer cause I don't know the situation. Are you referring to base coat or clear?
@@GarageNoise Both paint and clear.
Watching from Haiti 🇭🇹 thanks for the course!!!!
Thanks for watching!
Great video, to the point leaving the viewers on the edge of our seats in anticipation. Thanks for continuing education, knowledge truly is power. Peace out.
I like how you speak about keeping the repair small very important I use to make these mistakes also I like the roberlo filler must try it one day thank you for the video stay safe
Alot of the things I do come second nature to me cause I've been doing it so long. So creating these videos has really forced me to dissect all the steps in order to make a helpful video. Still working on that ,thanks for the comment!
Just found your channel and noticed you actually reply to all comments that had questions, thats a rarity in itself . Bravo my hats off to you . Enjoyed video learning alot in the videos appreciate what you do ,how you speak it and explain what you are doing . Keep up the awesome videos .
Thanks and welcome, appreciate the support brother!
@@GarageNoise ya welcome brotha
Watching from Jamaica 🇯🇲
Very cool! Welcome!
you got alot of patients lol sanding with 180. I would use 100 on a light filler like that. other times 80 grit on very heavy bodywork. I finish my bodywork in 320 and prime. sand the primer with 400 and use a light sealer sometimes depending on the job.
Great video! I’ve always had a hard time getting the filler perfect. A friend of mine used to have me close my eyes in between sanding. When I moved my hand over the fresh sanded area, It was easier to feel the hi and low spots.
Perfect yes, good tip! Thank's for sharing and supporting the channel!
Guide coat eliminates all the guess work.
for me found this very intuitive
th-cam.com/video/d7TSyRwC5Ik/w-d-xo.html
What do you do with the hole after drilling it? Just body fill over it? Or prime it and body fill? Or weld closed the hole?
I bough a camry le 1998 and it was hit on the quarter panel and like parts of it starting to come off
Probably had been painted before.
That reberlo looks pretty Smooth..!!..👍🏻👍🏻
Premium product at a reasonable price!
Hello
Which sand paper grit number before apply the putty and after apple the putty?
180 is what is recommended before and to block a glazing putty like icing. Then 320 before primer. Appreciate the support!
Awesome info, very well explained
Thank's for the support!
What is the orbiting size of the orbital sander your using? Thank you for all the great videos, new guys in the industry like me are super grateful for all the information.
3/16 its a finishing sander. Thanks for supporting the channel and what I'm doing!
I would just knock it out from the inside remove the wheel liner and hammer and dolly away, lol sometimes I hate using the stud guns. the guns are too heavy and the one you have.. it is good but for dings or if you got like 30 minutes of time to pull out. when i do bodywork i try to get it into bondo as fast as possible
Yes, it is true for speed I use a different process. I don't want to teach that for beginners. Maybe I should make some videos using different techniques for more experienced technician's
that would be cool I would watch I am doing a home Bodyshop soon and thinking of doing some videos like this also
@Garage Noise were you wearing a "pimp" chain in this video? That's old school, you go boy! 🤣
Lol, you got me crackin up! I indeed was wearing a "pimp chain" 🤣🤣. I was forced to retire it due to backlash from my daughters. Lol, have a good one Thanks for the laugh
@@GarageNoise I was a child in the 80s and a teenager in the 90s so I feel you 😎
Do that same repair on a bmw, and I will explain the rest. But a Chrysler, dodge has the most flexible mild steel available on every panel.
👍
good job my friend , i bought a galon of roberlo , and it is not smooth , how can i see the expiry date of the galon?
Not really sure on the date appreciate the support!
how about Bondo Body Repair Kit?
What are you referring to Joe?
Hello instructor by the grace of lord I'm too spray paint from Pakistan now working here in saudia Arabia so i have to some questions from you first of Fall kindly may i know that where you from who made a reaper car means auto panter
What is your question brother?
Continue good work and teaching 🌎👍
Thanks for sharing.
Hey there, I have a old steel horse trailer that's dented a little and rusted. I plan on painting it myself. You think I can pot filler on the small dents, sand the rust and paint it without taking all of the old paint off?
Depends what your looking for. If your just wanting to clean it up then yes that would work fine . You may consider shooting a sealer over it before you paint.
@@GarageNoise thank you so much!!!
Could you recommend something I could use for filler on a plastic bumper. Read bonds won't stick to plastic. Thanks for any feedback
Sure, if your concerned about adhesion this is a good one . Inexpensive and wrks well. I will sometimes use a thin coat of glaze to finish with. Here's the link
amzn.to/3VatZ9g
If you ever are looking for products I use there's a Amazon storefront link in the description of all my video's as well. Appreciate the support!
@@GarageNoise thanks very much. Greatly appreciated
Bro never stop making these videos dead asss
th-cam.com/video/d7TSyRwC5Ik/w-d-xo.html
Awesome Work 👌 👏 ❤
Thanks ✌️
Great videos, I have question , with what labor rates are wouldn't it be cheaper to get a new or undamaged fender and just prep and spray it ?
Good question! Remember if you replace the fender now you need to blend the color into the door and the hood . You would Also need to remove trim on that door to do it properly. So just repairing the fender in this case saves time and materials. Appreciate the support brother!
what is the brand for the tube used with the max filler?
Comes with the filler it's Roberlo
You sound 100 times better with that mic 😀
Thanks man, I'm lovin it.
Nice work
Do you use sealer over the primer?
Only if I have to. If I can have a uniform primer sanded to 600 ready for paint without sealer that's the best option without a paint booth.
amazing guide in setups! 😁
Great video
Thanks
How do you know how much to send off
When it's straight with the rest on the panel. Use guide coat it helps to ensure the panel is level. Check out some of my other body filler video's I think it will be helpful. Appreciate the comment and support
How long did you wait inbetween coats of primer and how long before painting? Thanks
So about 10 minutes between coats of primer but always check manufacturer's recommendations. After the primer is dry and sandable then your ok to paint.
really good
👍thank you!
That's a nice rig. No studs to pull grind. Looks like it's not as hard on the metal.
Take the fender linner out and repair the fender pretty simple
👍
Nice video inspirative amazing😃
Thank's! Appreciate it!
It will crack after some time?
Because of body filler? Body filler is really high quality stuff these days it's not like when it first came out. There won't be any problems with cracking . Don't be afraid of using filler. The only problem is when people miss use it by applying it way too thick.
@@GarageNoise Yes,i tought on body filler.
Just asking because service repair my door with body filer but i wanted to get new doors.
I hope it doesnt crack 🤞
Thanks.
what kind of grinder blade do you use?
36grit roloc
Appreciate your video
you should have started with 80 then 120 would have been faster but if your not careful you can sand too much off
Normally I would have but this Roberlo filler is designed to sand easy with 180 but 80 would've been quicker.
Whats your opinion on bondo?? Its the cheapest right? I worked with it but i honestly thought all fillers were hard to work with like bondo whats your opinion?
The bondo brand it's been a long time since I used it. The best cheap body filler I've ever used is R1 it's made by a subsidiary of Roberlo. Evercoat make good filler. You want good filer if you have alot of body work. There's a big difference in how a quality filler sands. It's much easier . Gallon will be about 50-60 bucks but it's worth it. Rage ultra is my go to right now.
@@GarageNoise i was about to fix some rust spots and almost got bondo till i did some more reasearch and this roberlo works wayyy cleaner and easier than the bondo i hated it for a spray or some that stops rust after cleaning inside and out as good as possible what so you recommend rusteuleum? Por15?
@@rodolfogiles8055 rust spots where? I use por15 on chassis and it's great stuff inside body panels cavity wax or rust inhibitor like ospho it's not as heavy and kills the rust . Check out tomorrows video repairing rust on the bottom of a door.
@@GarageNoise rust spot on wheel well around dodge charger and close the rear bumper do you have an email so i can send you pics and see what youbrecommend for this application im in Illinois so rust is bad out here
Auto panel beating and painting
👍👊
Ship doesnt have pro spot or chief pulling or welding systems? Havking away I guess.
👍
Haven't watched all your videos yet but am learning so much and considering painting my own truck what I once thought was not even conceivable! Maybe you have already discussed this but would like to know what affordable moisture/oil separator you recommend for a DIY'er like myself? Thank you!
Paint your truck! You can do it! If you have any questions along the way just let me know. I haven't found a reasonable priced water/ oil separator I can recommend I'm looking for a new one myself but If I find one I will put it on the channel. Thanks for watching and the comment.
Could you not have used the tools to sort it without grinding out ? Diddnt look to bad
Yes if you just want to make it look better and not perfect. A pdr tech might be able to make it perfect without paint but I lack those skills.
You do not have the drill holes use a stud welder
👍I didn't drill holes
Laying
Laverdad Thetruth
Salam kenal mas bro salam sukses selalu 👍🙏
great video, come to my house, friends
Laying Mentira
Paint less job….. 15 minutes with out paint 🎨
Not quite, but this video is about how to do body repair.
@@GarageNoise okay
Wow...really though !!? 🤔
I'd like to see that....possible maybe, but 15 mins... seriously!!
28 years in the trade and I feel so inept now because you like to lie on TH-cam 😂😂 stop !!
@@dbuckley100 lmfao bud !!!! I also have some years in the trade been slinging mud and pulling frames from heavy hits for a bit over 2 decades. Although the plastic he's using is pretty decent and easy enough sand
@@dbuckley100 Hope he works as a flat rate employee Adjuster probably wrote that dent for 3 hours Maybe I should just watch and learn something lol
per5
LaTruth
I thought it was Joe Rogan speaking haha
Lol, A few people have said that.
Pro tip mask it up before you mix your filler lol
Good tip!
Mentira
👍✌️
👍👊
I like your tools....but there is another way to fix that ...
Pdr?
th-cam.com/video/d7TSyRwC5Ik/w-d-xo.html
Thetruth
👍
Why wait until filler is mixed before masking alway do all prep first and why not cover wheel to keep dust from calliper etc
If you are telling us about a repair keep to facts not tell us about the make of filler stay on message
👍
Really bro, on dodge metal!???? Your doing to much.
Just repairing a dent. Why is that too much?
Do you ever use 90 psi on any of your paint sprayers?
No, why do you ask?
I know an idiot who does and then complains his compressor tank is to small to handle painting jobs. He has a 20 gallon husky. I told him too much psi turn it down. He laughed at me. 😆 what an idiot. I just wanted to make sure I wasn't crazy, thanks.
@@daniellegler4011 oh my, ok lol
Laverdad
Could've had that back to the customer, in brand new condition in 10-15 minutes , with that one blue handled tool. PDR . Crazy someone would want to repaint thier vehicle and lose all that value , when that dent was beginner level PDR!
Yeah I'm not that skilled at pdr yet!
@@GarageNoise I'd be more than happy to give you every pointer I know from 26 years of it. Anytime.
It's mainly I haven't devoted enough time to using the rods and practicing finish work. I'm getting pretty proficient at glue pulling.
Watching from Haiti 🇭🇹 thanks for the course!!!!
Awesome! appreciate the comment and support!
awesome video
Thank's Max! Appreciate the comment and support!