Lexus ECU Common Problems & Best Solutions | by ECU Team Corp
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Official Website: ecuteam.com
ECU Team Lexus Page: ecuteam.com/lexus
ECU Team Corp Online Store: ecuteam.com/shop/
Instagram: / ecuteamcorp
Facebook: / ecuteamcorp
#lexus #lexusecurepair #lexusshiftingproblems #lexustranmission #lexusecureplacement
This video represents Lexus ECU Common Problems and Best Solutions.
ECU Team Corp - Worldwide Automotive Control Module Supplier and Service Provider.
ECU Team Corp Offers the best solution on the market for Lexus ECUs. Lexus ECU Testing, Lexus ECU Repair, Lexus ECU Replacement, Lexus ECU Shifting Problems, Lexus ECU Transmission Issues, Lexus ECU No Communication, Lexus ECU Programming and more! Get things done right with ECU Team Corp.
Had check engine light for a while. One night I was giving it an Italian tune up n then the CEL started blinking and the car was shaking violently. Ever since then everytime I gave it a lot of throttle it would start the violent shakes again until I turned the car off. Slowly it takes less and less to make the CEL blink and then the violent shakes start. Only code that’s being ran rn is random cylinder misfire. I once got a p0174 or 172 code but that was only one time, I had a p0420 code for bank one but when I went under the car my cat on that side was gutted, so I made the other side even and that code went away. That night I drove back from Virginia it was acting a little better n then the next morning it took even less throttle for it to come back and start shaking again and the random misfire code
Could my ecu be a cause for this, I bought the car 6 months ago and it also has had rough shifts at random and would bounce off redline in automatic mode sometimes. 2008 Lexus IS 350
Absolutely, the problem is with the ECU, We do not recommend putting the aftermarket tune on the OE Toyota Computers. You can send it to us and we will get everything done for you, we will get rid of the misfires, shakings, and the violent moves that your car is performing.
@@ECUTeamCorp hi I am using lexus Gs350 2007 and the car refuse to start, we put it in a computer and is showing immobiliser fault, because the car undergo painting and we are suspecting may be there is drip of oil into the dash board, please how can you help on that? Secondly the passenger side back wheel vibrate when I am moving slowly but it doesn't when I am on top speed, and only 1 side vibrate which is the back wheel of the passenger side.
My 2006 lexus gs300 just started giving me transmission problems out of nowhere. It gets stuck on 3rd gear. When i restart the car, goes back to normal right away. No check engine light. Any thoughts ?
ECU Problem, you can get in touch with Edward via chat at ecuteam.com he will guide you through the process.
I have the exact same issue on my 06. Stuck in 3rd. Did the ECU swap fix the problem?
hi i have 3 problems with my 3uz. firstly it has hard changes when i accelerate fast but with slow accelerations its okay. secondly it also cuts power to the engine when i hard accelerate (floor the pedal hard). thirdly it consumes more fuel than it should.. are all these problems ECU related and how best can i fix them..mechanics in my part of the world seem clueless
What's the make, model and year of the car?
@@ECUTeamCorp what if it’s 2006 gs430
Ok.. Help me out . I have lexus gs300 model 2000 , i bought it used. worked fine for a month , then suddenly one day check engine light with VSC on and Off lights came on with no acceleration , i took it to mechanic.. codes came out p1121 , i changed throttle body (full) (used) .. worked fine for few days.. then again . same problem. i bought OBD II scanner and manually removing code everytime it appears . took it to few other mechanics and they dont seem to figure out the problem.
do you think its ECU which i have to replace?
Hello! I don't think you have to replace it. This computer is repairable most likely. It is a possibility that the problem is related to the ECU, but things like this has to be diagnosed on the bench. Please, get in touch with us and we'll help you out. Thank you! ecuteam.com/contact/
have a 2000 doing the exact same thing checked the harness twice following the Lexus service manual troubleshooting procedures. Replaced the throttle body with another from my 99 GS300 exact same problem. So gonna go with ECU next and keep an eye on ABS/VSC ECU under the dash
Hey sir, your help and guidance would be appreciated.
I have a slipping trans problem on my 2012 is350. Its not all the time that it slips just once every week when Im getting to high speeds on the freeway it tends to slip on 4th gear. But other than that the car runs solid.
I have the check engine light on since May 2021.
The code it initially threw out was p2714 for solenoid "D". We swapped it to a brand new OEM solenoid D package and not even 10 minutes later after driving down the road my check engine light came on again. We scanned it and it threw code p2714 solenoid "D" again along with a new code p0763 "solenoid C".
The swap on the solenoid D obviously did nothing but bring another solenoid problem on the scanner.
At this point my trans guy said to just try to find a low mileage used trans and call it a day. But now since you mentioned ECU , maybe I should look into that. May you help me with your input?
Hello, email us at sales@ecuteam.com and we will send you all the proper info.
Thanks for the informative video. I have a P2757 and P2714 error code. I have a hesitation feel when I release the brake pedal and the car hesitates when I accelerate from 1st to 2nd and to 3rd gear. It feels like driving a 4 cylinder manual transmission.
One mechanic recommended to rebuild my transmission without even road testing my GS 300 AWD. He said changing the the Solenoid D will be a waste of money. Then a second mechanic, road tested my car and said that the transmission is fine after he cleared the P2757 and P2714 code. He said that the issue was the ECU.
I checked your site and you don't carry an ECU for 2006 Lexus GS 300 AWD. Please advise
Visit the website and get in touch with our representatives. ecuteam.com
Man I got the same shit with gs 300 , how I can find new ECU?
Man I got the same shit with gs 300 , how I can find new ECU?
Thanks mate for the info , bought a exchange ecu replaced it and it fixed it , fairly easy job , cost $ 500 Australian.
Nice work!'
Di you need to get it programmed before it would start ?
I have a Lexus gs300 2006 that just today starts to buck when it down shift from 2 to 1. So basically at like 15 mphs.. you think it's possibly the ecm?
Same issue 😪 😕 its what he is talking about what everyone on the lexus page is saying and lexus does not help out at all
Hello! Sorry fro the late reply. As long as you checked solenoids, wiring to the solenoids, changed transmission fluid and the car is still acting up, be sure it's the ECU 100%. And yes, we can fix this problem. Contact us here: ecuteam.com/contact Thank you!
@@ECUTeamCorp .Their is any one expert in u151f transmission 4wd lexus harrier .problem is that I repair it clutch torque converter valve body sensor but still that suddenly brake the car.i changed fluid filter and fluid 3times.then don't shift in 3rd gear but you accelerate rpm gone up not shift. Thier is no codes give on scanner. I add liqui moly additive it's solve problem. 2000km again problem come suddenly braking applied car stop
I connected my battery backwards on my Lexus is350 and when I fixed it my car no longer starts. The dash turns on but the engines doesn’t. It doesn’t crank either. Do you think it’s the ecu? I also sent a contact request on your website
Blown main fuse from shorting the battery backwards
After such situation, you have to check all of the fuses. Matter fact, it can easily damage any other module in the car so it potentially can be the ecu but it can be much more than that. Have to diagnose the car!
So I drive a 2007 toyota mark x 4GR Engine same one you find in lexus PROBLEM car only shifting gear 1.2 and 3 ... 4 .5 n 6 not engaging Rpm Going up Speed picking up slowly.
Done ..
Services gear box by changing ATF 4 TIME( Problem Persists)
2. Changes all Solunoud Valves(Same Problem)
3.Changed Valve Body(same Problem)
Please Advice. Scanned Error Code P0760 THAT MADE ME CHANGE VALVE BODY P0760
WHAT CAN I DO
Send ECU to us 4 checking. Most likely it is the problem.
awesome information thanks man!
question: does the computer also control the alternator? my alternator keeps going bad on my 1999 lexus es300
Alternator and ECU work separately and have no communication between each other.
my gs400 alternator keeps going out too, my 3rd just went out in less than 6months
OMG a Transmission shop has had my RX for 5 weeks. Did transmission; then valve body; then Throttle sensor. Car runs just as bad as when I dropped it off. 02 sensor was original issue; then knock sensor......I’ve spent a fortune.....this makes so much sense. I should have just gone to a Lexus dealer! This is so basic. “Fkn computer shifts” I told them it was an electrical issue. How can a 30 year transmission guy NOT know this? I’m going to have to fix it myself!
Thank you for sharing
2011 Lexus GS350. Car is at the shop deer hit. Car is repaired. Car wouldn't start or it wouldn't stay running. Tried to program but the engine ecm is not responding to programmer. All other components are responding except the engine.
We can help you out. Describe your issue to sales@ecuteam.com
So just got into car accident, ecu is in the engine bay in my lexus gs400. Several major things got bent which i already replaced. Along with those was the ECU housing. It looks like it got bent and now car is throwing code p0300 for Random missfire and is not running well. Car was running solid before i really suspect the ecu because same thing happened to a motorcycle i had with a cracked ecu. Looking forward to your response! Thank you.
Hello, you can send in the ecu to us and we will check it, contact sales@ecuteam.com for more info.
Hello brother I connected my battery ,was doing harness repair didn't connect a ground on the harness, and connected the battery did I fry my ECU? Thew a pretty big spark wen connected
I have green light on start button ,push start nothing no lights on dash no gauges or lights on odometer not even signition
Contact us:
Address: 8125 Monetary Dr H 7, West Palm Beach, FL 33404
Tel: +1(888)541-6025
WhatsApp: +1(561)385-5843
Operation Hours: Monday-Friday: 8am-5pm EST
Saturday-Sunday: Closed
E-mail: sales@ecuteam.com
WEB: ecuteam.com
LinkedIn: www.linkedin.com/company/ecuteamcorp
Facebook: facebook.com/ecuteamcorp
TH-cam: www.youtube.com/@ECUTeamCorp
Instagram: instagram.com/ecuteamcorp
Telegram: t.me/ecuteamcorp
I have a 2011 GX460 and I have a P2757 and P2714 error code. My husband already changed the solenoids but the problem remains. We took to a transmission shop, he thought it could be the torque converter. Got that changed and nothing. He said the transmission is in good shape so he thinks it could be the transmission control module and temperature control because the gear shift problem (getting stuck on 3rd gear) only happens when the car is cold, once it's warmed up the problem doesn't seem to happen.
Could you advise? Thanks!
You can take out the ECU and send it in for diagnostics. Send email to sales@ecuteam.com
Could you go into detail about common repair on 08 is250 ECU for no communication? Is it burned resistor or what component fails and location typically?
Ok, we will make a video on that later
Hi. My car was not suddenly clear. After referring to the repair shop, we found that the engine computer has burned and the relationship between the computer and the car starter was cut off. After checking and repairing the computer again, the same happened and the computer was again damaged. The reason for injury is not yet specified. Please help.
Contact me sales@ecuteam.com
Hey I have a 96’ LS400.. I replaced the entire full system, full tune up etc. it’s getting spark and fuel, MAF is fine, all fuses are good, it starts and runs for about 3 seconds and dies out?
Check out your Fuel pump and fuel magistrate.
Hey ECU Team, hope you are well. I have the same lexus model and i have 2 very big issues,
The first one is my lexus automatically loses horn,lights control, indicator, head lights and steering wheel adjusting button.
The second one is my car some time does this problem where my car won’t run when i throttle until the rpm reaches 3 and it kicks very badly(like it just got in gear) and while driving it automatically brakes really hard for 1-2 seconds, tires screeching kind of braking.
Please i need help no one can help me solve this issue.
We have done computer tests but it doesn’t show any errors, just some normal ones.
I will appreciate the response.
Hello, thank you for contacting us. Please give us a call 8885416025 and we will provide you a free quote.
Hi how much and how long if I send you my ecm? I think it’s the original one and I might have problem with vst & solenoid c
We always charge $100 for diagnostics to determine the problem that you got.
i know this video is old so i hope i get the response im looking for. my lexus is250 hasn’t had no power steering will this help get it back?
It may help however first check all mechanical aspects of the car to ensure that it's good. If something is bad mechanically, replacing an ECM will not help.
Have a question do i have to use the same part number computer if i want to swap my car is an o6 can i use one from another 06
Yes, part number must be the same
Please help!
So my Lexus gs3 obd scan says vvt solenoid
But I replace me it 3x n the obd scanner reads the same thing help? Wires are fine I replaced coolant oil
Might be the computer problem, can't say 100% now, but you can sent it to us for Diagnostics and possible Repair. Thank you!
I would like to know if a bad alternator can prompt the error code P1550 as several checks have been made without any luck to the reason why the code P1550 is detected though no check engine light displays. Thank you
The error code P1550 responds to an issue with the electric throttle control system (ETCS). This system controls the throttle opening based on signals from various sensors. While a bad alternator typically doesn't directly trigger this specific error code, it can indirectly affect the operation of various electrical components in the vehicle.
@@ECUTeamCorp Thanks... I will discuss with the technician to take a look at the throttle control system.
I have a 2006 Lexus is250, I have the P2757 check engine code and I replaced the pressure control solenoid but still no luck, it still jolts up between first and second but still works fine highway speeds any suggestions on what I can do or how to fix it?
2006 lexus gs300 my did the same things mechanical said it was transmission replaced transmission did the same thing.so I take a gamble change computers $145 from yunkyard $130 to program the key.make sure computers number are the same.hope it helps someone.been 3+year no issue so far
@@kamsornthan5985 where did you take it to get it programmed?
Hello!
It's repairable computer for sure. This is common problem. Please, get in touch with us here: ecuteam.com/contact/
Haveing same issue but no check engine lights for me , ima buy a computer nd hopefully it works out
My suggestion take it to a guy that can program the key $145.dealer charge about $300+ if you decide to take to dealer tell them that all you want nothing else because they going to sale you a new transmission.call around some dealer do it some don't.make sure ecu number match the use one.hope it help
I want to somehow program out my 2006 GS AWD's first gear completely - any suggestions? I'm GOING to figure it out, but it would be nice if you knew and could reply because nobody in the Lexus forums knows.
How do you want to change your first gear?
Hi mate.
My Lexus is fine. I have serviced it regularly and change the transmission fluid. Reset ECU once.
Question: While slowing down at less than 10 mph it switches to 1st gear as slowing down. How can I hold second gear because I slow down over humps and it goes to 1st gear sometimes unless I don't press the brakes that hard.
IS250 Petrol Auto 2.5 RWD
Potentially the ECU might be the problem. You can send it to us and we can check it out for you, all of the info that you will need is on the website.
@@ECUTeamCorp So you trying to say this behaviour is not normal?
Very nice thanks for u helping we learning a good way thanks again
It's pleasure to help you. We'll be posting more videos.
great content
Thank you! We are doing our best :)
Let us know if you have any questions!
I have a 2018 Lexus is300 awd fsport and it looks like the vehicle is from Canada. The climate control is in Celsius not Fahrenheit. Can this be reprogrammed from the body control module from Celsius to Fahrenheit. Help would be great. Thanks
take the photo of the BCM module and send it to us at sales@ecuteam.com we will be able to help you out.
Do you have a video on how to swap it out.
Not yet, we will make one soon.
@@ECUTeamCorp did you make it
I have a 2008 Lexus IS250 that will not start. Mechanics have told me that the ECU is faulty, problem One. 2nd problem they tell me is that after manual testing the compression on four cylinders is 30PSI, very odd, car has only 150k kms, can continual starting with faulty ECU cause lifter 'pumpup' leaving the valves partially open. Just been informed I need a new engine. Do you do replacement ECUs for Australia?
Yes we can provide a REPLACEMENT Module, you will need to provide shipping in both directions as we do not ship outside the United States.
Hi. I have a 2007 IS350. I had my transmission rebuilt but now my car doesn’t go into 6th gear. Would that be a ecm or tcm problem? Or anything other problem. I also have all the solenoids changed and the problem continued.
Hello, this can be an ecu problem. You can send it to us and we can check it for you. Contact sales@ecuteam.com for more info.
I have a 2018 Chevy Malibu lt that no cumication to the scanner
Check your fuses and power going to the OBD. Also bring it to your local mechanic for initial inspection.
listen I am out of options and see you respond to everyone I just got 2000 GS300 VVTi and i have check engine light code P1755 lock solenoid I replace and light still there I was told to get new ECU will that help? any advice will be game changer for me I really love this car.
Hello, email sales@ecuteam.com for more info. Explain your situation and or employees will get back with you.
My 06 gs300 originally would slip in 6th then eventually seemed to have went into a limp mode it will shift 1-2-3. 4,5,6 show up on dash but no shifting. Do you think this is an ecu problem?
Limp mode is often triggered by the ECU when it detects a significant fault. You should have a diagnostic tool connected to the vehicle's OBDII port to get any fault codes stored in the ECU. Mechanical problems within the transmission, such as worn-out clutches, bands, or valve body issues, could also be at fault. If there's a problem with the ECU or the wiring/connectors related to it, it could potentially cause shifting problems. Problems with the transmission itself, such as a malfunctioning solenoid, torque converter issues, or internal damage, could cause the transmission to slip and eventually go into a limp mod where it remains stuck in a lower gear.
My 2011 Lexus IS250 has no abs and traction control due to an accident and out of insurance shoddy repair. This was all done by the previous owner. My mechanic has checked all the wiring for the ABS sensors and the sensors do read the speed but ABS and TCS is still not working. Could it be something related to the ECU?
It potentially can be related to the ECU, in our case sometimes the customers ABS and VSC light would come on if the ECU is faulty.
do u have an electrical plan to the THIS ECU that i can buy
I can provide Scheme for connection or electrical scheme
@@ECUTeamCorp ,Please DO it Will SAVE ME a DEAL
I have 94 ES300 and before it said it was the air intake valve and then it said it was bank 2 sensor 1 o2 sensor and now my overdrive light is blinking and it's saying vehicle speed sensor and output shaft speed sensor circuit.
So the OBD results change every time I fix what it says and then I check it again and it's showing me something different so I'm chasing rabbits. Would you say that's just a computer problem and no matter how much I keep replacing items is just going to keep showing a different code?
Lexus dealer says that no one can't program a computer if it's not installed on the car but I think they're just wanting me to take my business to them. Can you shed some more light on why they said this?
Most likely you have problem with capacitors, we can fix that for you! Keep in mind that dealer will primarily overcharge you.
My 01gs300 cooling fans start running as soon as the dsshblights come on. Relays are good and coolant sensor are good too. Is it the ecm?
Hello! It seems like the problem is mostly with the wiring.
Thanks for the info..I have an 05 LS430 that just started shifting hard downshifting from 2nd to 1st gear, from what I've read this is usually the ECU...What is the charge to repair the ECU?
Visit ecuteam.com and connect with our representatives, they will guide you.
My31and 37, I have a 2005 LS430 doing the exact same thing. Have you had yours fixed yet? My ecu is at the repair place for the second time.
@@chadvarnadore7767 yeah I had mine fixed ($100.00 at Sia Electronics) and it took care of the problem!
@my31 and 37 was the ecu. They screwed it up the first time. Fixed the shift problem, but had bad soldiers that caused 4 dash lights, no rpm needle, and rough running. Sent it back and they said it couldn't be repaired. They put my original chips back in it and I guess since the fixed the shift problem and put my original chips back in, I plugged it up and it's been running flawless. They also refunded my money so the only loss I had was I was out of the vehicle for 3 weeks.
@@my31and37 thanks for your response
can i just swap out ECMs from another is250 06?
Yes, but it first needs to be cloned. Reach out to us if interested.
Hello. I have a 2002 Lexus es300. Took it to a specialist and he confirmed that it’s the ecu or key or both. B2798 was the code it gave me? What do you think?
It's not the ECU. Most likely it's a Key problem. Could be immobiliser as well. Send us ECU + Key + Immo and we'll check and get it fixed for you.
I have 2006 Lexus GS 300 my transmission module doesn't work correctly? This is the issue before to make any stop has a little nocking i don't know what's going on someone could you help me.
do i need to be reprogram or replace ?
Check your car mechanically and make sure that the problem is in the ecu, then contact sales@ecuteam.com and describe the problem.
Hey buddy idk if you'll see this but the alarm system went off. I couldn't shut off the car. The transmission clunks in drive. I reset it by battery disconnect. Light can on. No check engine light. But traction can on then off? Help!
Get in touch with our engineers at sales@ecuteam.com
Hi I have a 2006 lexus with both p0172 and p0175 code saying that it's running rich and I have already changed the air filter and both upstream o2 sensors and mass air flow sensor and still nothing with the vsc light on, could this be related to the ecu?
Potentially yes, contact sales@ecuteam.com
My mechanic was gonna replace all my solenoids and i had read on a blog about the computer issue it was a hard down shift to 1st and it didnt want to shift into 3rd . Theres a guy on ebay that i sent my computer to and it was cheaper than the price of the solenoids alone. Im glad i went vomputer 1st saved me some coins it was an 06 is250. My gf totaled it a month later. But i picked up a project car an 01 is300 it was runnin like shit and no one could figure it out . I took the compuer out and there was oil that had pushed through a wire and was shorting things out . When you would give it gas it would bluh bluh bluh sputter . It ran good for a little while but its starting to do it again . Not as bad but the computer doesnt have oill on it but one of the peices kinda has a residue stain around it . Has any one heard of such a thing ? Im on yt hopin i run up on something. Sorry for the comment as big as a walmart receipt . Ha thanks.. nice video also
You probably got water damage on your computer, you can send it to us and we will check it out for you. Go to ecuteam.com and fill out the service request form, all the instructions on what to do next will be on the form's page. If you have any questions, contact our representatives.
My car has had the check engine and abs light on for a while. Now my battery died and got a new one and now the issue is when I try to turn on the car it will start accelerating by itself and the car starts smoking. I love my 06 lexus gs300, but this is driving me nuts.
I got it, get in touch with sales@ecuteam.com for more info please.
I need really an advice please 🙏 I have gs300 2007 and when I drive a long way i have the code p0430 I checked my car with many garages everyone have a sorry to tell change your catalytic other one change your o2 sensors 😅 but my car drive well after all but the code come back when I’m on the motorway can you help with an advice please thx in advance
Most likely it is something very basic, change your filters and make sure you do not have any vacuum, air, fluid leaks.
We could better off replace ecu with our in house analog but is it recommend
Absolutely not, ECUTEAM ONLY recommends replacing the ECU with the factory ECU which we can provide.
I have a 2006 Lexus is250 it wasn’t shifting right, I bought a transmission with 50k miles.. thinking that was my problem. After installing the transmission I when for a text drive and my shifting problems are still the same.. with p2757 and p0761 code.. but that’s just like the old transmission.
Contact
Tel: +1(888)-541-6025
Whatsapp: +1(561)-385-5843
E-mail: sales@ecuteam.com
What if the ecu is drawing power while carsvoff with key out..I'm drawing 0.5 volts ...any help
contact
Tel: +1(888)-541-6025
Whatsapp: +1(561)-385-5843
E-mail: sales@ecuteam.com
I have a 2006 Lexus GS300 AWD Automatic. When I drive a little slow it kinda like jerks makes a little like pop sound, and i’m not really sure what it is
Hello! Please, contact our representatives at www.ecuteam.com they should help you out.
I found a 2006 Lexus gs300 and the seller is saying a shop deprogrammed the keys and so he has to send the computer to reprogram it, I thought you only needed the keys to reprogram, and not needing to take the computer out?
Hello! We will need just the computer (ECU) and we are able to make it ready for programming under your car.
Hi I went to your website but it has a error, so nothing appears. I have the codes that come out. Dealership said I need to rebuild my transmission because from 1st to 2nd it pulls and only goes to 3rd gear and after that speed goes up but it over rebs and when I have it on sport shift it only has 3 Gear also. The fuse from the cigarette lighter away pops and the Radio spits the CDs I don’t know if this is something that has to do with the ECU I have a 2007 Lexus is250 RWD I been looking for a shop but a lot have bad reviews. Do you guys rebuild them or sell them.
We have faced this problem with Toyotas and Lexus multiple times and 9 out of 10 times tit is repairable. You will need to get in touch with our representative, sales@ecuteam.com ask for Edward.
Good video very knowledgeable.. ty
Glad we are able to help!
2006 lexus gs300 awd jerking when coming to a stop around 3mph 189,000 miles
the ECU has a problem
Hey, can you help me ? I am in USA I have Lexus hybrid 400h and I have problem with that... can I call you ?
Make sure you will fill out the "Request Contact" form on our website ecuteam.com , our representatives will contact you shortly right after.
I have a problem with my 98 Lexus gs 300, I went on vacation and came back so the car was sitting i tried going for a drive once i came back and I had click, no crank, no start. so I thought maybe the battery died, I charged the battery and boosted it and nothing so I noticed problems in the past with the starter and I didnt have my obd on me so I just changed my starter thinking it would solve it, my starter isnt the problem now, I changed it and we’re getting now, click, no crank no start again and no fuel pump prime, So we tracked it down to the ecu and noticed it was oily when we opened it but only in 2 connectors, I cleaned it with alcohol and qtips and let the car die out with the negative terminal on the battery disconnected then tried starting again after everything was cleaned and connected battery and I tried starting and when I turn the key to start the whole car shuts off no lights no crank no click no start. Im stuck and need help!
Hello, contact sales@ecuteam.com. Whats happening with the security light in your car?
My Lexus IS250 2009 model, I change the ECU and I program it for 30 minutes then I tried to start
it will make a starting sound and trip off, place what do I need to do
Get in touch with our representatives at sales@ecuteam.com
Hi, I have a 2007 lexus LS460 Someone hooked a batt booster to the batt, Car will only start for couple secends then dies, and commincation with ecu .
No comunication with ecu,
In this case, we need to see the ECU
Hello, I have the code p0a08 in my 2008 Lexus RX400H. Could it be the computer? I replaced many parts of the hybrid system and the problem was not solved. Is the computer the cause, thank you
I am not sure however i can diagnose the computer and let you know. Contact sales@ecuteam.com if you are interested.
I have misfires on all 4 cylinders on the driver side. It will misfire badly somedays and then run perfectly fine other days. There is no pattern to when it does it or not. The car is a 1998 Lexus LS400. Could this be a computer issue?
Hello! Make sure you will check out your wiring, plugs, connectors, Ignition coils, injectors and then you need to check fuel pump pressure etc.. After doing so, you can diagnose the car and see if your computer will have any codes. If your computer got any codes, contact us by going to our website ecuteam.com
Hello and thanks so much for your channel. I have a 95 Lexus ES300. When the headlights are on and Im driving approx 60-70mph the rpms become erratic and the car seems to shift crazy and out of control. Once I turn the lights off it stops. There are no ck eng lite on. Also sometimes ( unrelated) the ETC light comes on the dash when I didnt even manually turn it on...all else is fine. 80k miles. Can you provide any help? Thanks so much
Hello! You will want to determine first what gear is the car shifting hard on, also in what position you keep your transmission on, sport? Regular? That is also important to know, let me know! Thanks.
This makes alot of sense.
I'm happy we were able to make it beneficial for you!
04 ls430 99k, seems to have a worldwide issue.. Seems like it doesn’t know when to shift..
That is true!
I just started recently experiencing the first issue detailed in this video (yesterday actually) when downshifting from second gear to first (coming to a stop the car jerks) on my (old) 2006 Lexus IS250. If I shift into neutral when doing this it does *not* happen. So at least I can drive the vehicle without this annoying occurrence happening if I remember to do that. I have a cheaper OBD reader and it read code p0756 which is something about Solenoid B, but from the minimal research I’ve done from the web it could be that, the transmission, ECU, etc. I obviously intend to take it into a mechanic but do you have any idea on what it most likely is? Thanks in advance.
Hello, This is a typical ECU problem. When you have rough gear shifting most of the time it is fixable, and most of the time it is an ECU issue. Reach out to me via email and i will explain further details. It is sales@ecuteam.com
What was the issue? I have the same issue
@@iiFoogieIf it’s neither a transmission nor brake issue, then it’s an ECU issue. You can take it out of the car by removing a few screws and several computer pins (it’s a 20 minute job), and send it to a place that will re-wire the failed circuitry for about $180~200. That is what I did. It’s one of the small number of things a non-mechanic can do on his own without much effort or cost to himself.
@@ScarredRomeo Did you ever replace that solenoid? Also, did you reflash the original ECU prior to replacing/repairing? Exact same symptoms with 05LS just 80k miles and was the first drive after AAA replaced the car battery. My guess is the solenoid code is a symptom of a bad ECU, somehow screwed up from the battery replacement. Appreciate your response and update on your vehicle.
Hey man I went to the website and I don't see anything for the 1994 sc400..do you guys don't do this car
We deal with all the Toyota and Lexus cars, visit ecuteam.com and request a quote to get in touch with our representatives.
Very informative.
Glad it was helpful!
I have RX 300 2002, my electrical person checked and confirmed that all the sensor are working but I am having "system too lean" code on both bank, then he suggested that we replace the ECU, what's your advice or recommendations, thanks in anticipation
We can provide you with a RE-MANED unit that will cover with 1 year of warranty, visit ecuteam.com and get in touch with our representatives for more info!
@@ECUTeamCorp he found some vacuum leaks later, but now I have P0136 complaining on the ECU and he said the sensor is working.
@@samgbuyi Get in touch with us!
My Gs300 speedometer and fuel gauge not working when engine car starts n moving. Please help
Need more info, contact sales@ecuteam.com
My Lexus is250 when coming to a stop and pressing brake there’s a hard stop/ jerk feeling. However if I put the car in neutral and come to a stop , it’s totally fine, is this the ECU or tranny
It can be both, I recommend having the tranny checked out first.
Thank you So Much
No problem
Thanks
Welcome
Would a 2006 Lexus IS 350 ecu work in my 2008 IS 350?
The year and model does not matter, as long as the part number is the same everything should work. We do data transfer with 100% guarantee that all your data from the original module will be transmitted into a used one.
What's the cost of a used programed ecu
What part number do you need?
@@ECUTeamCorp my ecu is messing up. Do I need the part number from the ecu?
Replaced main fuse and alternator and now im having electrical issues and alternator is not holding a charge
Check your ground between engine and body, all the positives connectors on your alternator too. Sometimes the issue might be in the cluster.
I jump started my car wrong I put the black on wrong can somebody pls help it won’t turn on I change a few fuses it keep say depress break pedal n I have no power just one click
Check all your fuses first, under the hood, interiors, if you got some in the trunk also check them out.
My 2006 lexus gs300 wont start i changed the starter and it only cranks now
sales@ecuteam.com contact us for better explanation of the problem.
BRO I HAVE LEXUS ES300 2003 MODEL BUT CHECK ENGINE LIGHT IS OFF . WIRRING AND FUES BOX IS WORK BUT ECU CANT WORK PLZ HELP ME .
Hello! If there is NO check engine light, but everything else works good, meaning that the ECU lost communication. It might be bad ECU, might be bad wiring. Most likely ECU, if your vehicle never has an accident.
Hey Valentin , I’m so confused and stress out with my Lexus IS 350 a starting and dying right away. I took it to the mechanic he scanned the car and it gave him an immobilizer issue so I bought a new Immobilizer module new Smart key he programmed it but still did the same problem and now it’s not letting him program the car do you know what it could be ?
In this car the main components for it to crank are the following: ELV, Immo ID, smart key module (located usually in the trunk on the right side) and the ECU. Do not forget about the key as well. If you want your issue to be resolved, send it to us and we will prepare it for you under the programming using a dealer scanner tool. Visit ecuteam.com/ for more info.
The scanner can't communicate with the ECU. And the check engine light is not flashing. Could be the inmovilator ?
This is ECU problem or wiring. Connection from OBD to the ECU on this Lexus is direct.
@@ECUTeamCorp My Lexus is a 2006 GX470. I was thinking to send my ECU to see is you guys find something wrong. Then I know if is the ECU or the wiring.
We'll be happy to help. Make sure you scan the car, fill out Service Request form and explain the problem as detailed as possible. Follow easy steps here: ecuteam.com/service-request/
My dash cluster quit working gauges and dash lights quit working ? ?
Ok, if you are interesting getting your work repaired, contact sales@ecuteam.com
Crown 2004 3gr engine ecu k-line pinout please
We can send you info to your email. Get in touch with us. sales@ecuteam.com
Could cruise control be a problem?
If I am not mistaken, there is another module for the cruise control.
@@ECUTeamCorp ecm? Cause I cannot figure out why my cruise isn’t working
Is sleeping happen more frequent while driving a concern
Please, rephrase
@@ECUTeamCorp I never lost conciousness before but by driving current car it start to happen more frequent than before could be externality or internal dynamic reprogramming of the ECU I am not certain but if it happened to Nissan then I am sure it soon will spread to all others
Will this fix Shift stuttering ?
Absolutely! Get in touch with us for more info! ecuteam.com
My 95 ls400 has a p0500 an doesnt shift into drive but all other gears work
Hello! In this year, the only solution is to replace the ECM, go to ecuteam.com and fill out the form for further details.
I have issue in gear can you tell me
Yeah, I can help you.
@@ECUTeamCorp please guide me sir
@@ECUTeamCorp we mostly drysolt gear ic give it heat and put a heat sink on ic and it’s working,,,
Thanks for the info!
Any time!
If my fuses in the car seem Burnt (dark haze on tips) that would mean it's probably roasted?
Most likely yes. Check wiring as well.
Heres one for u all windows and sun roof open sometimes on its own looked all over for answers and no one knows
Not related to the ECU. Most likely it's a BCM.
@@ECUTeamCorp TY
How to remove the ECU in a 2006 GX470 so I can send it to yall
Usually you can find the ECM under the hood behind the plastic coverings.
Hey I have a 2002 Lexus gs300 and it’s currently at Toyota due to the key 🔑 not communicating. I was told that I needed a new key, then later they said it was the ignition ring, then they switched it and told me that they dnt have the proper tools to actually program/fix the car due to its year. So now I’m stuck with a bill of $378 for the key, ignition ring and labor cost and a car that still won’t run. So I’m guessing it’s the ECU. I need help!!
You can send in the ECU and the key to us and we will check it for you for $95
Ok, I just sent a request contact under Jacory Watson. I just need the address
I get code b2281 what does this mean? Is it urgent? My car runs fine.
Check the forums, should be some information over there.
I need an rx300 2000 lexus computer 3.0 liter v6
Hello!
Just get a quote here: ecuteam.com/lexus-auto-computers/lexus-ecu-ecm-module/
I have a 92 ls400 could a reverse Polarity fry my computer
Hello! That's sad to hear, however you have very high chance this computer being repairable. Please, contact us here: ecuteam.com/lexus-auto-computers/lexus-ecu-ecm-module/
I have a 98' ls400, the temp gauge said it was overheating so i went to get it checked. They did a cooling test and a sensor test and both came negative, now i noticed the temp gauge is at C and doesnt move and the car has starting issues now. What could it possibly be? Im tired of spending money
It's a problem with the actual cluster. Gauges are going bad with time, so you have to fix it. We can do that for you. Get in touch with us here: ecuteam.com/contact/