*Table of Content, part 2:* • 14:06 *Hold & drag r. m-button:* Distribute units • 14:37 *Hold & drag r. m-button, then P, then Attack-Command:* Don't shoot until the last one has arrived • 16:13 *A: Attack:* Shoot to a position • 17:47 *T: Set Target:* Shoot to target (while moving) • 18:37 *D: D-Gun:* Fire the alternative weapon! • 20:13 *F: Fight:* Move to the Target and shoot as soon as it is in range • 20:55 *Q: Clear Queue* eg. clear the factory build queue • 21:40 *H: Patrol* between positions • 22:22 *K: Toggle Cloak* • 23:10 *L: Toggle Fire state:* Hold, fire at will, … • 24:01 *; Toggle Roaming:* Control unit movements • 25:15 *! Toggle LoS:* Line of sight mode • 25:55 *Enter: Chat* and Console • 26:01 *Shift: Queue* commands while pressing shift • 26:45 *Building:* Common building commands • 29:55 *Commander: M:* Restore the ground • 30:28 *Audio: Backspace: Mute* sound … • 32:25 *F5: Ping:* Communicate with team mates • 33:16 *The Ctrl Key* • 35:50 *Ctrl W:* Select all identical units • 36:37 *Ctrl E:* Evacuate • 37:45 *Ctrl T:* Map overview • 38:00 *T: Pause / Wait" unit • 38:17 *Ctrl T:* Select paused / waiting units • 38:57 *Ctrl i:* Game infos • 39:15 *Ctrl Groups:* Assign units to numbered groups • 40:51 *Ctrl B:* Self-destruct Unit » causes damage! • 42:42 *Ctrl Enter:* Message to everyone
Set target not for target ground, for targeting ground we have attack command, but set target is used for priority target setting, so units in the fight when the target is in range will start a fire at the set target and instead of shooting nearest target.
Why did we lose the "Track" functionality in Grid keys layout? I love tracking units and have the camera follow them, but now only Legacy keys has Track.
Restauring the ground work on Lava map, if u have normal ground and have big explosion ( commander boom/geo boom/afu...), ground disapear and lava get out and spread and damage everything and ground dont get back. Restaure "add" ground and close ground breach. Restaure normaly work on shore/water but I have never try it so IDK.
Guard order works to make constructors follow another one and assist him, and they also repair the unit they guard Im pretty sure. Might also work to keep a mobile radar and/or jammer near your artillery unit group, or mobile AA or repair bots around your com or whatever else you can think of. I'm not sure if you can ask 1 unit to guard multiple ones so they don't just stop when the first one guarded dies. I'll have to test that.
*Table of Content, part 1:*
• 00:36 Tab: select *commander*
• 02:09 Tilde: *Draw* on map
• 03:12 Q: *Select* same unit-type
• 04:27 W: *Resurrect* units & structures
• 05:11 E: *Reclaim* resources
• 06:03 R: *Repair* units & structures
• 06:46 T: *Repeat* commands
• 07:19 Y: *Pause* production units
• 08:00 J: *Transport* units
• 08:56 I: Unit *information*
• 09:50 O: *Track* a unit
• 10:29 P: *Attack* area
• 11:21 D: *Special commands* eg D-Gun, rockets
• 12:00 F: Command to *fight*
• 12:42 Z: *Build* structures & units
• 13:29 G: Clear building *queue*
Additional, for details see part 2:
• 14:06 *Patrolling, cloaking, evacuating, grouping* units
• 15:17 *Control commands* for various in-game actions
• 16:40 *Self-destruct* for units in distress
• 17:21 *Chat communication*
Was just about to comment that it would be nice with timesamps xD
*Table of Content, part 2:*
• 14:06 *Hold & drag r. m-button:* Distribute units
• 14:37 *Hold & drag r. m-button, then P, then Attack-Command:* Don't shoot until the last one has arrived
• 16:13 *A: Attack:* Shoot to a position
• 17:47 *T: Set Target:* Shoot to target (while moving)
• 18:37 *D: D-Gun:* Fire the alternative weapon!
• 20:13 *F: Fight:* Move to the Target and shoot as soon as it is in range
• 20:55 *Q: Clear Queue* eg. clear the factory build queue
• 21:40 *H: Patrol* between positions
• 22:22 *K: Toggle Cloak*
• 23:10 *L: Toggle Fire state:* Hold, fire at will, …
• 24:01 *; Toggle Roaming:* Control unit movements
• 25:15 *! Toggle LoS:* Line of sight mode
• 25:55 *Enter: Chat* and Console
• 26:01 *Shift: Queue* commands while pressing shift
• 26:45 *Building:* Common building commands
• 29:55 *Commander: M:* Restore the ground
• 30:28 *Audio: Backspace: Mute* sound
…
• 32:25 *F5: Ping:* Communicate with team mates
• 33:16 *The Ctrl Key*
• 35:50 *Ctrl W:* Select all identical units
• 36:37 *Ctrl E:* Evacuate
• 37:45 *Ctrl T:* Map overview
• 38:00 *T: Pause / Wait" unit
• 38:17 *Ctrl T:* Select paused / waiting units
• 38:57 *Ctrl i:* Game infos
• 39:15 *Ctrl Groups:* Assign units to numbered groups
• 40:51 *Ctrl B:* Self-destruct Unit » causes damage!
• 42:42 *Ctrl Enter:* Message to everyone
Honestly so helpful. My life is so busy and I’d love to do this on all my vids just have too much going on.
Set target not for target ground, for targeting ground we have attack command, but set target is used for priority target setting, so units in the fight when the target is in range will start a fire at the set target and instead of shooting nearest target.
Appreciate the clarification. I’ll have to check that key out again.
Thanks for the video! Very helpful
Glad it was helpful!
More on its way!
Thank you for this, I learned a TON! I feel like there is a lot more hidden hotkeys and tech!
Super glad to hear. I made this a long time ago but glad it brings value to bar!
Need to look at the settings. Pressing tab just zooms out and pressing again back to where you were.
It’s likely cause you have not selected grid key optimization. I recommend this because it is very intuitive.
I’ve played for about a month now and I actually learned a ton
Very good! More coming in the future as well!
Why did we lose the "Track" functionality in Grid keys layout? I love tracking units and have the camera follow them, but now only Legacy keys has Track.
Someone needs to call up the dev team!
Restauring the ground work on Lava map, if u have normal ground and have big explosion ( commander boom/geo boom/afu...), ground disapear and lava get out and spread and damage everything and ground dont get back. Restaure "add" ground and close ground breach. Restaure normaly work on shore/water but I have never try it so IDK.
It definitely can have some use cases! I’m excited to see what people come up with.
Your coffers were full at the time of reclaim. 😂 Poor grave robber never made a difference. Great content! Thanks.
Glad you enjoyed. love to be of help
use guard to have aa and radar/jammers follow ur front liners :P, its what i use it for
Oh good idea!
When you have a group of units with different speeds and you want them all to move at the same speed?
Guard order works to make constructors follow another one and assist him, and they also repair the unit they guard Im pretty sure.
Might also work to keep a mobile radar and/or jammer near your artillery unit group, or mobile AA or repair bots around your com or whatever else you can think of.
I'm not sure if you can ask 1 unit to guard multiple ones so they don't just stop when the first one guarded dies. I'll have to test that.
It would be interesting to see if you can have a guard command on multiple units. That could be pretty powerful
Attack ground could be used if you saw a commander go invisible, but do not have radar. More so for artillery vs close combat
Yes I’ve used this a few times but it’s pretty hard to get down perfect cause the com can change direction pretty rapidly.
hell yeah thank you.
shooting the ground is good for mines
Agreed and Juno is definitely the op mine killer
Double tap q mapwide selection
Good to know.
Doesn't work for me?
@yaranzo5pwns check the key bindings in settings. If it’s not set to grid key optimized all of these will be different