Just installed ARB compressor with ACM Bracket. Purchased all the components via links on this video. Everything arrived exactly as described. I have a 2021 JLUR with manual transmission. No clearance issues. No spacers required. Only installation issue encountered is we broke two plastic fender clips. Recommend you purchase some extras ahead of time. Thanks Eddie for designing the bracket and putting together a clear easily understandable video supported by written instructions.
Thank you for another lesson on Jeeps. Now I know how easy it is to take off a front fender. I am still going to tote around my compressor since I bought it just after buying the Jeep two years ago. It is interesting to watch your videos. Cindy must be recording since the angle of the shot changes constantly and keeps you and everything you want to show in the video. Great job Eddie and Cindy.
Great explanatory video !! FYI - one thing an old timer taught me almost 30 years ago (now I'm an old timer lol), is to be careful cutting the ends off of the Zip Ties!! They look better and neater BUT, they are SHARP and can easily cut you. If it's in an area that no hands or arms will go, no problem BUT, if that sharp little cut end is exposed and in any area you may be tinkering with, maybe just loop the long ends around a few times and cover them with electrical tape. Thank you for what you do! 👍
Man, I really appreciate you. Super detailed instructions on every project you do. Having never done any mechanic work on a vehicle, you make me feel confident that I can do this because you don’t skip steps in your vids or apply any BS to cover up what you may not know. It’s clear that you know exactly what you’re doing which helps folks like me take the plunge. Thanks again. Happy to use your affiliate links. Jerry.
Duuuuude, no one on the Earth treats the Jeep like you do, Amaaaazing!!! if I was the Jeep's owner, I would bring you in as a technical consultant to fill the gap the Jeep has right now... good job and thanks for teaching us
Just wrapped up this install today. Really happy with everything. I will say you should definitely buy a bag of extra fender clips, half of them snapped on me when removing the fender. I also had bad luck with ARB hose kit. It did not come with the T piece that attaches the pressure sensor. The house was also damaged. I bought that kit a few months ago so I am out of my return window for Amazon which is a bummer. Long story short, check for all parts and test everything. This tutorial was so helpful, install was a breeze. This is going to make airing up from the beach much easier and faster.
What a great video! You have everything thought out and applied so perfectly. That was one complaint people had, was not being able to fit a compressor under the hood. Love your workaround and innovation! Thank you 👍🏻
I finally installed my on board air today! Thanks Eddie for the great video! Few things I would recommend, buying extra fender clips (I salvaged half of mine after pulling it off), when installing the remote Chuck, install the 90 degree compression fitting first to avoid knuckle busting, and use aux 3 or 4 because those are only need 15 amps.
Jumped on the only one in stock when it was available - delivered in two days! Darn impressive. Install was almost exactly as shown - except the sensor line from the catalytic converter ran to a connector on the horizontal bracket - different than how it runs on yours- and was to short to keep the bracket sideways. Only way to get enough slack to clear the compressor was to bolt it back under to mount. Nut still fit and tightened up properly. Otherwise it went without a hitch. Thanks for providing a great, solid product.
Finally got around to doing the install using the kit I ordered and received months ago from you for my Gladiator! Other than not taking off the wheel (which you mentioned wasn't mandatory) I followed your instructions and it worked perfectly! took about 2 hours as I wanted things to remain tidy under the hood etc. ---- one thing to note for others looking at this kit plus items the ARB 1m 1/4 hose extension is no longer available on amazon (or more accurately the item shows none available! ) ---- Thanks again for such thorough instructions!
Just installed the ARB compressor with the ACM bracket. Like previous viewers I purchased all of the components from this video. A great video with very detailed instructions. Everything went well with one small exception. I have a 2021 JLUR and the lower stud was in a different location than the cutout on the ACM bracket. I had to make a small cutout about 1/2" to the right of the cutout. Extremely happy with the installation and performance of the system. Thanks for making a great video and products.
I'm sorry to hear that the ACM didn't just bolt right up but glad to hear you were able to make it work and that you're still happy with it. I'll have to give this a look.
I just saw a write-up quazi how-to for this mount last week - I do believe this is is now on my Need list... Just not THAT Air Supply... no one needs that EVER!! :-)
perfect timing! have that same compressor in a bag in the back! time to buy your mount and the extension items and mount mine the same way! thanks for taking the time to make such a great howto !!
Great video, great channel, your videos are all so very detailed and informative. NOTE to JLUR DIESEL OWNERS; the driver's side wheel well is where the windshield reservoir bottle lives, and it's a big one, and mounted in the same location as Wayalife's mod.. So unless you can find another place to mount an alternative washer reservoir and fittings, the ARB compressor will not fit in said wheel well. No, I have not looked at what is located in the passenger side area. Take care,
Great instructional video. Just got done with lift, tires and rock lights. Have been contemplating where I’d place a compressor ... and you just answered it! Now I just need to figure out where to order your bracket Thanks!
You may as well as claim me as a dependent lol I am definitely getting your mount and installing the onboard air compressor! I love watching your videos and customizing my Gladiator!
just a tip, you should shrink tube all that wiring you did especially those solenoid plugs not currently being used and also buy some ratcheting wrenches. Harbor Freight made a set comparable to snap-on called Icon if you want to take a look!
Thanks for a good Video. You're a good Teacher, I enjoy the details laid out with great communication. I hadn't considered purchasing a better compressor, let alone a fixed mounted one, but your opening comments sold me. Also, I totally agree on using a Torque Wrench on the lugnuts!
Excellent vid , people who might be new to DIY on rigs will be able to do the work even if they did not have much knowledge of how it all goes together before. It will ease their minds and let them see it's not brain surgery and there is no mystery in how it all goes in. Nice work.
We have a fair amount of mud and water on our off-road trails in NC. I slipped a 6” long sleeve from a cut off section of bicycle tube over the air chuck located behind the front bumper. I thought about sealing the end but decided to leave it open. You don’t even have to remove it from the chuck to insert or remove the hose. Keeps mud, water, and debris out of and off the chuck. A simple easy solution.
Glad you mentioned it only takes 2.5 minutes to air up from 15 - 30 psi on a 37 inch tire! Not bad at all. Being new to this world, one would think nothing less than the dual ARB air compressor would be worth having.
LOL - the twin is a bit faster but I think you'd be surprised at how little it really is. At least, from what I've seen. I used this setup to air up my 40's during the JL/JT Experience and found that I was finishing up about the same time as everyone else, every single time.
@@wayalife I had such an internal argument on weather or not the video was going to go to Mega Cheesy Mode or not. Fortunately it was quickly squashed. 😄😄😎
This was so helpful for my install. Thanks for showing all you did!!! It made it so much easier for me to be sure I was following the manuals for my ecodiesel JL and the ARB compressor properly
Just don't forget the wires on that cluster are also on the inside under the glove box one more thing if you don't want to use the supplied relay and fuse the bigger two wires are on a 40A fuse and a relay and there are plenty of grounding jeep did a good job with this feature
Awesome install but still a JK and TJ owner for now. You did a great job with the how to video and the bracket you designed is perfect clean and simple install.
Eddie, I got everything installed and cant tell you how much watching this video helped me. Great bracket and everything fit perfect. I did end up breaking 6 clips but I ordered the ones you had listed just in case. But there was a little trimming involved were the clips go in, I think the factory clips are a little narrow in the center were they slide in but everything worked out. I did run my air line on top of frame rail under power steering pump and did the same modification to the bracket you did and wow man, Perfect!! Just wish the ARB kit came with a dust cover for the Airport but I found one that will work. Thanks again man and will definitely order more stuff again.
8:43 Whispers, "okaaaaaay," under your breath. The good ol', 'Yup, now I can't remember anything that comes next, but that looks good,' okay. That one got me to chuckle.
Thanks for the help figuring those issues out i was able to get it put in do to your awesome video. There was no guess work involved. Just waiting to get a extension hose to be able to mount the chuck behind the front bumper. For now it works and is ok behind the tire.
Another top notch video production! Thanks for all you do for the community. Just replaced my tie rod and drag link with Synergy HD JT kit and Synergy track bar relocation/steering box kit after your last vid. Now it looks like I’ve another project. You’re killing me smalls!
Really liked the install video and the way you walk through things. Attention to detail is great and I really like the location of that mount. My wife really wants a JLU Wrangler Rubicon and I was curious where to put onboard air. Thanks for taking the time to push this video out.
Since I already have a twin compressor in my JK... guess I’ll be buying a JL so I can instill this very cool piece of kit. Very well done guys. I know making custom brackets like that so you can bring them to the public is both time consuming and exhausting. Happy new year!
Awesome and I apologize for not having these available for sale right now. I'm on the road right now and unable to ship anything so I pulled everything out of stock. I should be shipping by mid week again though :)
Love your videos, I watch all of them and also from Northern Nevada. The only thing I noticed about the ARB wiring harness is that the fuse should be as close to the battery as possible, not across the engine bay. if a positive wire were to ground out between the battery and fuse you could potentially have a fire. You have an absolutely beautiful collection of Jeeps and your style of making and explaining your videos are excellent 👍
Just purchased a “stars & stripes wayalife” hoodie in support of your channel. Definitely an awesome channel you guys are promoting. Would like to see more content...more often, thanks!
LOL!! Hey Katie, it was a pleasure meeting you even if only in passing. Nice JK you had too! Hope to see you around town or better yet, out on the trail :)
Wayalife - thanks she’s my husband’s baby 😂 we are actually moving out to Virginia in about three weeks for a new duty station. My husband just hit 17 years active duty Navy, we are currently stationed at NAS Fallon. My husband was disappointed he didn’t notice you 😂
@@wayalife Yeah, I had to push those ABS pipes a bit to make more space so I was able to squeeze it in and rotate compressor to far right. I knew it would take more effort than regular (not 4xe) JLU, but there isn’t much space anywhere in the car (not counting passenger seat) :)
Thanks for such a great video really well thought out and presented. My buddy and I ordered Everything we needed from your link and installed our systems on our Jeep’s yesterday. First one took a bit longer than the second (ha). Thanks again love the channel!
Thanks Eddie, I added an ARB compressor in my 2020 JLU. I followed your directions perfectly. The only problem I had was those **** Fender clips. I broke 3. I had ordered the replacements from your link which said there were 13 in stock, but never got shipped out and its been 11 days since the order was created. I cancelled the order for them today and will have to find somewhere else to order. You might want to change the link to another place that will actually ship out products. :) Other than that, Great Video, Thanks.
Really enjoying the videos. Just ordered my first jeep. Getting the new diesel wrangler rubicon. All the videos have really helped in giving me an idea on what I need. Hoping to build it all out as soon as I get it or have Evolution build it. Keep up the vids.
VERY comprehensive (yet concise) installation video, nothing we didn't need but EVERYTHING we did need to know. My question was why no locktite on the mounting bolts ~ not an issue? Love the "not that Air Supply", that was awesome. Your videos have gotten so good! Thank you for all your editing work and great information! Probably one of the best videos I've seen done, and it's very nice to know HOW to wire in the Aux switches (since Jeep won't tell you).
Thats a slick mounting location. I think my only concern would be heat from the manifold/cat on extended idles times. Although this would probably be a long term concern.
Since the AUX switch package has built in relays and fuses under the hood, why not simplify the installation by wiring the main power wire directly to one of the 40 amp circuits and eliminate the air compressor relay? You used a 12ga. 40A wire to power a low amp relay. That compressor only draws 14 amps.
Careful about the 14 amps have used an ARB compressor for the last 4 years and it melted the power supply plug to the motor, now changed to an Anderson plug and also melted the 40 amp relay, now changed to a 70 amp one. Not just my one other mates have had the same happen to theirs.
Because at the time, we thought we would be getting ARB air lockers in the Dana UD60's we now have. We wanted to just use the ARB wiring harness to make things easy and keep things clean.
Just installed this setup on my jlu rubicon. I ordered the heat shield but could not install it as there was another wire in the way that I could not get around. But in all very happy with the install.
I really am sorry to hear that you weren't able to install the heat shield. I'm not sure what wire you're referring to but would love to address this if I can. Would you mind telling me what what year JL you have as well as engine? Thank you.
Okay, I was only able to test it out on a JL and JT with a 3.6L. I assumed that it would work on a 2.0L being that the ACM can be installed on it too. I apologize for the trouble. Please reach out to me at store @ wayalife . com and I will be happy to send you a refund for it. If there's any chance you could send me a photo of what the problem was, I'd be super grateful.
Totally awesome and informative. I knew I liked Cindy and Eddie - awesome team with camera and videos. I want to let you know that you are appreciated and Thank You and please continue
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Just installed ARB compressor with ACM Bracket. Purchased all the components via links on this video. Everything arrived exactly as described.
I have a 2021 JLUR with manual transmission. No clearance issues. No spacers required. Only installation issue encountered is we broke two plastic fender clips. Recommend you purchase some extras ahead of time.
Thanks Eddie for designing the bracket and putting together a clear easily understandable video supported by written instructions.
Awesome! So glad that you're happy with your ACM and that the install went well for you. Thank you for the nice review too 😎
@@wayalife I am curious if you broke the plastic fender clips too...
@@kodder Yes, a couple. I should have a link in the description for replacements.
Thank you for the simple straightforward layman-style communication and for not skipping steps. You are a great speaker and teacher. Thanks!
Truly flattered that you would say as much. Thank you. Glad to hear our video was helpful to you.
Just installed an ARB single in rear cargo area of my JLUR and Eddies description of the wiring finally helped solve the problem. Thanks Eddie
Glad our video was helpful to you.
Thank you for another lesson on Jeeps. Now I know how easy it is to take off a front fender. I am still going to tote around my compressor since I bought it just after buying the Jeep two years ago. It is interesting to watch your videos. Cindy must be recording since the angle of the shot changes constantly and keeps you and everything you want to show in the video. Great job Eddie and Cindy.
LOL - oh yeah, Cindy does pretty much all the filming and editing. I just get all the credit 😁
Great explanatory video !! FYI - one thing an old timer taught me almost 30 years ago (now I'm an old timer lol), is to be careful cutting the ends off of the Zip Ties!! They look better and neater BUT, they are SHARP and can easily cut you. If it's in an area that no hands or arms will go, no problem BUT, if that sharp little cut end is exposed and in any area you may be tinkering with, maybe just loop the long ends around a few times and cover them with electrical tape. Thank you for what you do! 👍
Man, I really appreciate you. Super detailed instructions on every project you do. Having never done any mechanic work on a vehicle, you make me feel confident that I can do this because you don’t skip steps in your vids or apply any BS to cover up what you may not know. It’s clear that you know exactly what you’re doing which helps folks like me take the plunge. Thanks again. Happy to use your affiliate links. Jerry.
Truly flattered that you'd say as much and so happy to hear that our videos are helpful to you. 😎
Welcome to (it’s a Jeep thing)
Duuuuude, no one on the Earth treats the Jeep like you do, Amaaaazing!!! if I was the Jeep's owner, I would bring you in as a technical consultant to fill the gap the Jeep has right now... good job and thanks for teaching us
LOL - you're too funny but thanks :)
Wayalife I 😄😄
Almost makes me want to go buy a new JL so I can buy the bracket and mount my ARB compressor in that location! lol
That is a nice install, brilliant!
LOL - too funny. Glad you like what you see :)
Just wrapped up this install today. Really happy with everything. I will say you should definitely buy a bag of extra fender clips, half of them snapped on me when removing the fender. I also had bad luck with ARB hose kit. It did not come with the T piece that attaches the pressure sensor. The house was also damaged. I bought that kit a few months ago so I am out of my return window for Amazon which is a bummer. Long story short, check for all parts and test everything.
This tutorial was so helpful, install was a breeze. This is going to make airing up from the beach much easier and faster.
Great feedback and so glad to hear this video was helpful to you.
What a great video! You have everything thought out and applied so perfectly. That was one complaint people had, was not being able to fit a compressor under the hood. Love your workaround and innovation! Thank you 👍🏻
Thank you. We appreciate it :)
I bought the mounting bracket on the morning of December 28th, received it on December 29th.... WOW!!! !!! That was fast shipping. Thank you!
Awesome! Glad to hear you're happy with it 👍
If I only had a 10mm wrench or socket. AWESOME ARB INSTALL, Thanks for all the hard work in your videos. Keep them coming!
LOL - now that's funny. Glad you found our video to be useful :)
I finally installed my on board air today! Thanks Eddie for the great video! Few things I would recommend, buying extra fender clips (I salvaged half of mine after pulling it off), when installing the remote Chuck, install the 90 degree compression fitting first to avoid knuckle busting, and use aux 3 or 4 because those are only need 15 amps.
Glad you're happy with the ACM and glad the video was able to help you out. Great tips too!
By far the best how-to Jeep installation videos on TH-cam! Thanks again!
We're flattered to hear you say as much. thank you.
Just bought my first Jeep. I've been binging on your videos and really enjoy your content. keep it up!
Congratulations to you and thank you :)
Same!!! I really love the way you do your videos and support American products. Totally been binging your videos since I bought my gladiator!
Jumped on the only one in stock when it was available - delivered in two days! Darn impressive.
Install was almost exactly as shown - except the sensor line from the catalytic converter ran to a connector on the horizontal bracket - different than how it runs on yours- and was to short to keep the bracket sideways. Only way to get enough slack to clear the compressor was to bolt it back under to mount. Nut still fit and tightened up properly. Otherwise it went without a hitch. Thanks for providing a great, solid product.
Thanks for the heads up on the changes Jeep has made and glad to hear you were able to work around it anyway.
Finally got around to doing the install using the kit I ordered and received months ago from you for my Gladiator! Other than not taking off the wheel (which you mentioned wasn't mandatory) I followed your instructions and it worked perfectly! took about 2 hours as I wanted things to remain tidy under the hood etc. ---- one thing to note for others looking at this kit plus items the ARB 1m 1/4 hose extension is no longer available on amazon (or more accurately the item shows none available! ) ---- Thanks again for such thorough instructions!
Awesome! Glad you were able to install your ACM, that it went well and that our video was able to help you out.
Just installed the ARB compressor with the ACM bracket. Like previous viewers I purchased all of the components from this video. A great video with very detailed instructions. Everything went well with one small exception. I have a 2021 JLUR and the lower stud was in a different location than the cutout on the ACM bracket. I had to make a small cutout about 1/2" to the right of the cutout. Extremely happy with the installation and performance of the system. Thanks for making a great video and products.
I'm sorry to hear that the ACM didn't just bolt right up but glad to hear you were able to make it work and that you're still happy with it. I'll have to give this a look.
I just saw a write-up quazi how-to for this mount last week - I do believe this is is now on my Need list... Just not THAT Air Supply... no one needs that EVER!! :-)
LOL - awesome and no, nobody ever needs that. :)
I like your blue renegade ....I had a yellow Orange one when it was one year old, loved it ,wish I had it back
Thank you
perfect timing! have that same compressor in a bag in the back! time to buy your mount and the extension items and mount mine the same way! thanks for taking the time to make such a great howto !!
Awesome! So glad to hear we could be of help to you :)
Great instructions! In Minnesota, I would use OxGuard on the terminals to keep corrosion at bay.
Thanks! Glad you found our video to be informative and good tip!
Just got the compressor and your mount Eddie! Going to install it on my new JL Rubicon nest week! Best place to have a compressor hands down!
Awesome and thank you 👍
ARB. Another great Aussie company. I have the same ARB compressor under the hood of the JL via the aux switches too. works like a charm. Steve 🇦🇺
Awesome :)
WAYALIFE are one of the reason why people buy a Jeep Wrangler. 🤙🏻
LOL - you give us way too much credit but we're flattered you would say as much :)
ABSOLUTELY! I binged on his JL Journal before i got my Rubicon two weeks ago lol and i'm still here watching more hahaha
Followed instructions and links. Worked like a champ on my 2022 gladiator. I did not need to remove tire or bodywork. It was a tight fit but not bad.
Awesome! Glad to hear it :)
Just what I’ve been looking for to mount my single ARB compressor. I’ll order one soon.
Awesome! Glad we'll be able to help you out :)
Wayalife just ordered. Thanks!!
Eddie have you had any problems with dirt getting into coupling?
Great video, great channel, your videos are all so very detailed and informative. NOTE to JLUR DIESEL OWNERS; the driver's side wheel well is where the windshield reservoir bottle lives, and it's a big one, and mounted in the same location as Wayalife's mod.. So unless you can find another place to mount an alternative washer reservoir and fittings, the ARB compressor will not fit in said wheel well. No, I have not looked at what is located in the passenger side area. Take care,
Glad to see y’all back. Miss the videos you produce
Thank you and we apologize for being gone so long.
Great instructional video. Just got done with lift, tires and rock lights. Have been contemplating where I’d place a compressor ... and you just answered it! Now I just need to figure out where to order your bracket Thanks!
Awesome! Glad to hear we were able to help you out. There is a link in the video description to place an order for one. :)
You may as well as claim me as a dependent lol I am definitely getting your mount and installing the onboard air compressor! I love watching your videos and customizing my Gladiator!
LOL - awesome :)
just a tip, you should shrink tube all that wiring you did especially those solenoid plugs not currently being used and also buy some ratcheting wrenches. Harbor Freight made a set comparable to snap-on called Icon if you want to take a look!
Perfect timing! I have a JT and was looking into adding some onboard air! Nice video!
Awesome! Glad we could be of help :)
Thanks for a good Video. You're a good Teacher, I enjoy the details laid out with great communication. I hadn't considered purchasing a better compressor, let alone a fixed mounted one, but your opening comments sold me. Also, I totally agree on using a Torque Wrench on the lugnuts!
Happy to hear you enjoyed our video and found it to be educational.
Another great install video Eddie and Cindy. Keep up the great work! :)
Thank you, hope this is something that can help you out :)
Excellent vid , people who might be new to DIY on rigs will be able to do the work even if they did not have much knowledge of how it all goes together before. It will ease their minds and let them see it's not brain surgery and there is no mystery in how it all goes in. Nice work.
Thank you! Glad you enjoyed the video.
Great video. Covers the install steps well.
Thank you my friend :)
We have a fair amount of mud and water on our off-road trails in NC. I slipped a 6” long sleeve from a cut off section of bicycle tube over the air chuck located behind the front bumper. I thought about sealing the end but decided to leave it open. You don’t even have to remove it from the chuck to insert or remove the hose. Keeps mud, water, and debris out of and off the chuck. A simple easy solution.
Very cool, thanks for the tip
Sir! You're making me spend way too much money on my JLU Moab with these videos! Lol Keep up the good work!
LOL - Glad to hear you've been enjoying our videos :)
One of the best install videos every. Simple even for a layman like myself. Thanks.
Awesome! So happy to hear you find our videos to be helpful.
Great Video Eddie, I love the way Cindy films the unboxing of your parts. Its been a while.
LOL - sorry for being MIA. Wanted to spend time with the family over the holidays. Glad you enjoy our videos :)
Had no idea you’re down in Carson! Got my ACM mount up in Reno last week, putting it all together in the next day or two. See ya on the trails 🤙🏻
Awesome! Yeah, just down the way from you. Maybe we'll see each other around sometime :)
One of my favorite Jeep channels. Thanks for sharing.
Glad you enjoy it!
I just added this mod to my Jeep yesterday! It's great.
Awesome, glad to hear it :)
@@wayalife And I added it to my wife's Jeep today. A lot easier the second time around, especially with the video!
Glad you mentioned it only takes 2.5 minutes to air up from 15 - 30 psi on a 37 inch tire! Not bad at all. Being new to this world, one would think nothing less than the dual ARB air compressor would be worth having.
LOL - the twin is a bit faster but I think you'd be surprised at how little it really is. At least, from what I've seen. I used this setup to air up my 40's during the JL/JT Experience and found that I was finishing up about the same time as everyone else, every single time.
Good seeing getting back in it hope you an Cindy had a great holiday an wishing you the best of the new year great video as always be safe
Steve Tabor thank you, we really do appreciate it 😎
It’s been a dry spell without Wayalife videos. Don’t let it be another month without a video! Haha! You guys are awesome!
Sorry about that. Needed to take some time off to spend with the family. Hope to get more videos out on a more regular basis again :)
Wayalife Totally understandable! I was just being selfish. 😉
Another excellent video bro!
Thank you, so glad you liked what you saw :)
Got the install done today, on the coldest day here so far, but it's done. The mount worked great, also installed the CBbar for my Ham rig.
Awesome! So glad to hear you're happy with both!
"Um, not *that* kind of Air Supply".
HAHHAHAHAHAHAAHHAHAHAHA
LOL - glad you found that to be funn :)
That was funny. That hair. And great songs for it's time. Great slow dancing music.
@@wayalife
I had such an internal argument on weather or not the video was going to go to Mega Cheesy Mode or not.
Fortunately it was quickly squashed.
😄😄😎
This was so helpful for my install. Thanks for showing all you did!!! It made it so much easier for me to be sure I was following the manuals for my ecodiesel JL and the ARB compressor properly
Glad it helped!
Just don't forget the wires on that cluster are also on the inside under the glove box one more thing if you don't want to use the supplied relay and fuse the bigger two wires are on a 40A fuse and a relay and there are plenty of grounding jeep did a good job with this feature
Love the step by step instructions you make it look easy never knew how easy it really is
Awesome :)
Excellent video as always! Please note that the "NEW Optional Heat Shield" link in the description is broken.
Thank you for the heads up.
Thanks Eddie, because of your videos, I bought my Rubicon JLU, no kidding. Nice job.
LOL - congratulations to you on your new Jeep :)
Awesome install but still a JK and TJ owner for now. You did a great job with the how to video and the bracket you designed is perfect clean and simple install.
Thanks! There are tons of options for the JK and TJ but I couldn't find anything I really liked for the JL/JT. Had to come up with something myself :)
About to buy a Jeep - been researching all the mods I want to do so I can stage (1.2.3 etc) them with my budget. You have a been a big help.
Awesome, so glad to hear it 👍
Eddie, I got everything installed and cant tell you how much watching this video helped me. Great bracket and everything fit perfect. I did end up breaking 6 clips but I ordered the ones you had listed just in case. But there was a little trimming involved were the clips go in, I think the factory clips are a little narrow in the center were they slide in but everything worked out. I did run my air line on top of frame rail under power steering pump and did the same modification to the bracket you did and wow man, Perfect!! Just wish the ARB kit came with a dust cover for the Airport but I found one that will work. Thanks again man and will definitely order more stuff again.
Awesome, glad to hear it!
Just did this install. Thanks for the ACM and the video instructions. Pretty painless for an amateur wrencher like myself!
Awesome! So glad to hear it and glad that you're happy with your ACM!
8:43 Whispers, "okaaaaaay," under your breath. The good ol', 'Yup, now I can't remember anything that comes next, but that looks good,' okay. That one got me to chuckle.
Thanks for the help figuring those issues out i was able to get it put in do to your awesome video. There was no guess work involved. Just waiting to get a extension hose to be able to mount the chuck behind the front bumper. For now it works and is ok behind the tire.
Awesome! So glad to hear it :)
now that is a very slick mounting solution, well done brudda
Shane Martinson thanks! Glad you liked it 😎
Now that’s what I call a great instructional video. Will be ordering the mount very soon!
Thank you and awesome :)
Very detail explanation, proper tools you have.. nice video bro
Glad you liked it! 😎
Another top notch video production! Thanks for all you do for the community. Just replaced my tie rod and drag link with Synergy HD JT kit and Synergy track bar relocation/steering box kit after your last vid. Now it looks like I’ve another project. You’re killing me smalls!
LOL - glad to hear our videos have been able to help you out with the build of your Jeep :)
Great install video.
Thanks for putting the work in for everyone else's benefit.
Glad to help
Thank you for this video. I couldn’t find how to wire it to my AUX switches anywhere, I even called ARB and they couldn’t help me.
Glad I could help :)
Really liked the install video and the way you walk through things. Attention to detail is great and I really like the location of that mount. My wife really wants a JLU Wrangler Rubicon and I was curious where to put onboard air. Thanks for taking the time to push this video out.
Awesome! So glad that our video was helpful to you :)
Hey Cindy and Eddy!! Hope your holidays were full of peace and joy!! Glad to see you uploading videos again.
Thank you and Happy New Year :)
Since I already have a twin compressor in my JK... guess I’ll be buying a JL so I can instill this very cool piece of kit. Very well done guys. I know making custom brackets like that so you can bring them to the public is both time consuming and exhausting. Happy new year!
LOL - thank you my friend. Happy New Year to you as well :)
Great video, Eddie and Cindy. I have ordered the parts, except for your back ordered mounting plate. You guys are inspirational!
Awesome and I apologize for not having these available for sale right now. I'm on the road right now and unable to ship anything so I pulled everything out of stock. I should be shipping by mid week again though :)
Real slick mounting solution. Great for a bug out vehicle
Glad you like it! :)
Wayalife you earned a sub today sir thank you
We really do appreciate it. :)
Very cool. The mount design is very clean. Great job.
Thank you, glad you like it :)
Dude, can't wait for your next adventure. The east coast one was very good.
So glad to hear you enjoyed it :)
You made that look so clean and easy. Great video
LOL - honestly, it really is that easy to install :)
Love your videos, I watch all of them and also from Northern Nevada. The only thing I noticed about the ARB wiring harness is that the fuse should be as close to the battery as possible, not across the engine bay. if a positive wire were to ground out between the battery and fuse you could potentially have a fire. You have an absolutely beautiful collection of Jeeps and your style of making and explaining your videos are excellent 👍
Man that was one hell of install video! Now to order everything up and watch the video again! Thanks!
Awesome! So glad to hear our video was helpful to you 😎
Just purchased a “stars & stripes wayalife” hoodie in support of your channel. Definitely an awesome channel you guys are promoting. Would like to see more content...more often, thanks!
Thank you, we really do appreciate your support and we'll do our best to get more content up :)
Great Video...now I want one of those compressors!!!!
Glad you like the video and happy to hear it was helpful to you.
Saw you at Lowe’s recently in Carson, shouted hey in the parking lot!
LOL!! Hey Katie, it was a pleasure meeting you even if only in passing. Nice JK you had too! Hope to see you around town or better yet, out on the trail :)
Wayalife - thanks she’s my husband’s baby 😂 we are actually moving out to Virginia in about three weeks for a new duty station. My husband just hit 17 years active duty Navy, we are currently stationed at NAS Fallon. My husband was disappointed he didn’t notice you 😂
Well that's disappointing that I missed your husband and that the two of you are leaving just after we met.
Great Vid, just an FYI, what helps in sand, snow etc when airing down is not a wider footprint but less rolling resistance.
Thank you. Just finished that on 4xe Rubicon. It was tight but doable... :)
Really, it worked? I wasn't sure if it would and have been wanting to know. Thank you for posting this up!!! 👍
@@wayalife Yeah, I had to push those ABS pipes a bit to make more space so I was able to squeeze it in and rotate compressor to far right. I knew it would take more effort than regular (not 4xe) JLU, but there isn’t much space anywhere in the car (not counting passenger seat) :)
I looked at mine today, and it is difficult to do this without damaging the lines. Can you provide more info, pics? forum post with more details?
Thanks for such a great video really well thought out and presented. My buddy and I ordered Everything we needed from your link and installed our systems on our Jeep’s yesterday. First one took a bit longer than the second (ha). Thanks again love the channel!
LOL - glad to hear it! 😎
I installed this mount and compressor a bit ago. I love it and it works great thank you!!
Awesome!! So glad to hear you're happy with yours :)
Thanks Eddie, I added an ARB compressor in my 2020 JLU. I followed your directions perfectly. The only problem I had was those **** Fender clips. I broke 3. I had ordered the replacements from your link which said there were 13 in stock, but never got shipped out and its been 11 days since the order was created. I cancelled the order for them today and will have to find somewhere else to order. You might want to change the link to another place that will actually ship out products. :) Other than that, Great Video, Thanks.
Thanks for the tip. I'll look into it.
What a great bit of kit! Nicely done on the bracket 👍👌
Thank you! Glad you like what you see :)
Really enjoying the videos. Just ordered my first jeep. Getting the new diesel wrangler rubicon. All the videos have really helped in giving me an idea on what I need. Hoping to build it all out as soon as I get it or have Evolution build it. Keep up the vids.
Really happy to hear it and congratulations on ordering up your first Jeep :)
Good video Eddie and Cindy clean and simple.
Thank you. We're glad you enjoyed it :)
Great how-to video! You make everything look easy. 👍🏻
LOL - thank you but if you follow the steps I show in this video, it really is that easy.
I don't seed easy is litle hard.Is more better pay to do it
VERY comprehensive (yet concise) installation video, nothing we didn't need but EVERYTHING we did need to know. My question was why no locktite on the mounting bolts ~ not an issue? Love the "not that Air Supply", that was awesome. Your videos have gotten so good! Thank you for all your editing work and great information! Probably one of the best videos I've seen done, and it's very nice to know HOW to wire in the Aux switches (since Jeep won't tell you).
You're too kind and we're truly flattered you would say as much. Thank you.
Just call them like I see them (good and bad) @@wayalife. Very impressed with your growth over the last year, keep it up.
Now thats a clean install
Thank you :)
Thats a slick mounting location. I think my only concern would be heat from the manifold/cat on extended idles times. Although this would probably be a long term concern.
Well, so far so good. We've had this installed on our JL for well over 20,000 miles and on our JT for about 15,000 miles. No issues what so ever.
Great video. One of the best how to diy videos I’ve seen so far!! So easy to follow!! Will be ordering soon!!
Thanks.
Thank you. Glad to hear we've been able to help you :)
Hi from, Sakhalin island, when I by Gladiator), will use your videos like manual)), thanks!
Awesome :)
And just like that my list extends again.. Thanks!
LOL - so glad that we could be of help to you :)
Since the AUX switch package has built in relays and fuses under the hood, why not simplify the installation by wiring the main power wire directly to one of the 40 amp circuits and eliminate the air compressor relay? You used a 12ga. 40A wire to power a low amp relay. That compressor only draws 14 amps.
Careful about the 14 amps have used an ARB compressor for the last 4 years and it melted the power supply plug to the motor, now changed to an Anderson plug and also melted the 40 amp relay, now changed to a 70 amp one. Not just my one other mates have had the same happen to theirs.
Because at the time, we thought we would be getting ARB air lockers in the Dana UD60's we now have. We wanted to just use the ARB wiring harness to make things easy and keep things clean.
Just installed this setup on my jlu rubicon. I ordered the heat shield but could not install it as there was another wire in the way that I could not get around. But in all very happy with the install.
I really am sorry to hear that you weren't able to install the heat shield. I'm not sure what wire you're referring to but would love to address this if I can. Would you mind telling me what what year JL you have as well as engine? Thank you.
@@wayalife its a 2021 JLU Rubicon with 2.0 engine.
Okay, I was only able to test it out on a JL and JT with a 3.6L. I assumed that it would work on a 2.0L being that the ACM can be installed on it too. I apologize for the trouble. Please reach out to me at store @ wayalife . com and I will be happy to send you a refund for it. If there's any chance you could send me a photo of what the problem was, I'd be super grateful.
Happy new year and glad we have another video from wayalife👍🏻
Happy New Year to you as well and apologize for the delay in getting a video up. :)
Awsome install! Love how clean and simple it is.
Thank you.
Totally awesome and informative. I knew I liked Cindy and Eddie - awesome team with camera and videos. I want to let you know that you are appreciated and Thank You and please continue