How To: Foam Coat (Cosplay Tutorial)
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- FoamCoat is a non-toxic, water-based coating for a wide variety of surfaces such as foams (styrofoam, polystyrene foam, …), wood, fiberglass, papier mâché and many more! The coating can even be used on 3D prints as a primer and filler
Get foamCoat @Cosplayshop.be
cosplayshop.be...
- TUTORIAL BY @Silasallaround and @Captainghostly
- FILMING AND EDITING BY @SkySharkCosplay -
- THUMBNAIL BY @Fran_gi_pan -
MATERIALS LIST
-FOAM COAT
cosplayshop.be...
-CONTACT GLUE
cosplayshop.be....
TO SUPPORT THE CHANNEL: ko-fi.com/skys...
Music used:
Target Practice - Riot
Royale
While you work it
Silent partner - DC love go go
Hi looks like a good product. I’m using pva glue to harden insulation foam so far so good. Also I’m going to try golden acrylic soft gel as I have a load of it left over from previous project
new intro new intro new intro! :D
It'll still change a bit, but yes!
Is it possible to use a siphon feed spray paint it. I have taught airbrush Techniques since the 1970's at university.... we used to use fiberglass resin and let it dry and then mix fiberglass beads and resin and then jam it into the smaller tight details. After that we would add fiberglass flock and if needed cut it really small, then mix it with resin and again stab and jab it into all the nasty time spaces. Any Suggestions?
Hi! Just wondering if foamcoat works also for eva foam? I've been dying to find a similar primer. Thank you!
awesome video - which IKO ENERTHERM do you use ?
Do you know if the Foamcoat is water/weather proof?
omg Silas XD Da einde
Da moest!
Do you guys ship to the U.S.?
I need an question answered cause its making me really upset, I got Foam-Mo which looks to be the same thing but I Don't know if there are any differences. In my experience Foam-Mo does not dry at all
@@fourthousandhammers3493 Hi, sorry for the late reply! Foamcoat is not the same as 'Foam-Mo' So it dries out completly ;)
@@SteveVanhulle I think I made an miss calculation I was talking about your guy's Foam clay in comparison to Foam-Mo, sorry if that was confusing
@@fourthousandhammers3493 ahah :) i was indeed a bit confused. I have not had foam-mo to test myself. Indeed simular i know, but for sure our foamclay does dry out completly! Can easy be sanded when dry. Importend to wait 48 hours to dry out completely.
@@SteveVanhulle thank you for getting back to me
How good does it stick to a PLA 3D print?
Sintoxic really well!
What kind of Foam are you using there to carve the Hook out? I always use xps insulation foam but the one you are using here looks completely different and a lot more workable with.