Obviously there's gonna be some comments about "We want Grant!" and the such, but can we give some love to Nate? Grant chose him for a reason so I'd like to say that he's doing a great job right now! I like both Grant and Nate, so keep it going, you two! Absolutely love this channel :D
Jeremy Maynard I think the only reason he wasn't was because it wasn't just the fiberglass itself plus the fact that it wasn't much grinding at all, knowing grant if it would have be hazardous they would have worn proper protection
You should wear a respirator while applying resin to fiber glass, when cutting fiber glass, and grinding/sanding at it. Basically you need to use a respirator whenever you are handling fiberglass.
The particles of resin will equally shred your lungs, they put warnings on resin miniature kits which are way smaller than the amount he was grinding off.
I think after this little series on fiberglass castings nobody should say that Nate isn’t perfect for the channel. He knows his stuff and is a great addition to the channel
Nate is a necessary part of the channel now. As the channel grew, Grant had an obligation to increase the quality of the content. One person can't possibly be in charge of design, creation, and editing. That's why Nate is here, so that Grant can do some behind the scenes work and make the videos we love. Keep up the good work :)
A mask at the very least, I got worried when I saw him polishing off the sharp edges with the rotary tool. Airborne glass dust is NOT something you want in your lungs!
ok I got two things i would love for you guys to do!!!! 1. Can you show us how to make a Dragonball from dbz and also I was wondering while metal is molten is it still conductive? Thanks guys keep up the work Nate and Grant!! :D
The thing that measures conductivity is valance electrons. It’s the electrons on the outer shell of the atom. These shouldn’t change when metals are molten So yes they are just as conductive.
Actually I already discovered his channel and i love his work as well but i think I missed one of his videos talking about that. Would have to find it :)
Guys, thanks for doing this video series! I've been wanting to do a fiber-glass casting project for a couple years now, but held-off because of how complex the process seemed. However, I have followed the instructions in many of your past videos (router table, hot wire cutter, and metal melting kiln to name a few) and always gotten great results. Now I think I will tackle that fiberglass casting!
You guys should experiment with magnesium powder and other chemicals to make different kinds of black power for beautiful fireworks!💥 BTW I love you guys and I have been subbed since the beginning!❤️ Also I think Nate is doing a great job keeping the channel going while Grant is working on “The Big Project” and I think it was smart to do this so we get double the videos and better quality. Keep up the good work!👍🏽
There's a lot of comments saying where's grant and many people hating on Nate! Sometimes the past cannot always be. Things change and we should appreciate that he even uploads for us.
I'm really more excited about the projects Nate is bringing up for us this time, This thing is AWESOME!!!! You have definitely earned my fandom Nate!!!
FYI for anyone who plans to use fiberglass and resin. Where a respirator. Not a dusk mask or stuff like that. You need to wear a respirator. It is very toxic to inhale or ingest. Especially when sanding/grinding away at it.
@@rxz4140 Polyester (fiberglass) resin uses styrene, the styrene dissolves polystyrene cups (such as the popular red cups) chemically. Much like acetone will do to any ABS plastic. Clear cups are typically PET (polyethylene terephthalate) or PP (polypropylene) so that's what you should look for instead.
It's always enjoyable to watch how you do a project you're very concise in your instructions can you walk everybody through it anybody could make a fiberglass mold for what you showed them
This is one off my favorite channels throughout TH-cam and there are others but if I don’t want to watch them I can always go here and count on this channel to keep me occupied and not bored. 😄
A HELPFUL TIP IF YOU DONT MIND MY INPUT. There's a chop mat gun that has the fiberglass mat in rope form an as you pull the trigger it sprays 1 inch pieces an soaks up the resin even an level so you don't get air bubbles , an unwanted sharp edges an a glass bubble roller helps smooth out the air bubbles . Hope this helps for future videos
Hey Grant and Nate! Great video. This is very inspiring and now I'm thinking about how I could apply these techniques to my own projects. I'm really enjoying the new content and I think Nate is a great addition to your TKOR team. Keep 'em coming! -Brian
Hello from me to people who hate nate I just wanna say why you all are so hated to nate because I see that nate doesn't give me any problem for taking grant place in this channel,I mean there must be a reason that why nate taking grant place in this channel like grant wanna help his friend nate to be popular like him so don't you hate nate give him some chance to prove us that he can help grant to make this channel more productive in youtube.can you try to think that nate have work so hard to make a new awsome video for us and no one appreciate his work,dont be a person who like to bullying people be a person who like to help other person. and my message to nate I will always try to supporting two of you guys grant and nate.love you all. and thanks to read my comment I really appreciate it if you read it. P.S=who have a reason why nate must not gonna be the king of random host please reply this comment below.
You can also apply a layer of Body Filler (Bondo) to make the surface smoother, and fill up any holes (then sand and fill again). Also, with the idea of the foam, you can apply the fibreglass to the foam after demolding it. That way you can have a solid version of the prop that can resist a bit more beating up, and also drill holes to screw on other parts (Maybe a blue shell? XD).
New member, I’ve been looking for this tutorial. Lol when you were lining the turtle with the black air brush, first thing that popped in my head was I can use a sharpie, since I don’t know how to use an air brush machine. Thank you for the tutorial. Now it’s time for me to get started. Have a great day.
I was ordering pizza in 2014 I heard a guy say the king of random is the best TH-cam channel ever That’s how I started to watch your channel love you both P.S if you’re wondering where grant is his on vacation
I have a new experiment idea: you should get some sort of thing the flys in the air (maybe a drone or balloon) and let it hover in the air for a whole day. Would it disappear and be somewhere else in the world due to earth’s rotation? Or would it go along and stay in the same area as earth spins around?
Since the dust from the grinding is plastic and glass, I suggest you wear a dust mask while grinding. And if you want a smoother surface I assume you can use a primer on the fiberglass and sand it down to the desired finish.
i think it might help if after the 1st later of resin cured/dry, add 1 layer of mix resin+talc to make the surface of the resin smoother before adding the fiberglass layer to reduce any air bubble gap when the fiberglass cant bent deep enough. never used fiberglass cloth so i dont really know how far it can bent but i do that with fiberglass math
![[UNCUT] บอสพอล แผลงฤทธิ์ บอสพระ-นักร้อง ก. โดนแฉยับ! I คนดังนั่งเคลียร์ I 21 ต.ค. 67](http://i.ytimg.com/vi/XKf6HeftoPI/mqdefault.jpg)
Obviously there's gonna be some comments about "We want Grant!" and the such, but can we give some love to Nate? Grant chose him for a reason so I'd like to say that he's doing a great job right now! I like both Grant and Nate, so keep it going, you two! Absolutely love this channel :D
👍👑
I am a fan of both but where is Grant
Very true
Grant is on a vacation
Poor Grant probably just wants some time with his family! TH-cam is a very demanding and time consuming occupation.
Shouldn't you have been wearing a Respirator while Grinding down the edges of the Fiberglass?
Jeremy Maynard I think the only reason he wasn't was because it wasn't just the fiberglass itself plus the fact that it wasn't much grinding at all, knowing grant if it would have be hazardous they would have worn proper protection
You should wear a respirator while applying resin to fiber glass, when cutting fiber glass, and grinding/sanding at it. Basically you need to use a respirator whenever you are handling fiberglass.
The particles of resin will equally shred your lungs, they put warnings on resin miniature kits which are way smaller than the amount he was grinding off.
he was cutting it not grinding it, it shouldnt have left dust just a few jaggy pieces
respirators are for bishes, i never used one XD
*How cool would a fiberglass blue shell drone be?* 🤔
TechByte or a green
ok.... how about you throw in some explosives? ;)
TechByte mounted to a flying drone
*VERY COOL*
Flite test did a 3d printed blue shell quad (drone)
I don't know about others but..Nate's doing a very good job...👍👍..keep it up Nate..
agree
Finally someone who doesn't just complain, i think he is great thus way we get more content!
Now do it with the blue shell so you can teach kids to never be first at anything!
lul
Litterally all that would be done is painting blue instead kf red
And adding spikes...
Coggler Angie and replacing the car with a helicopter
And adding small wings
Nate's skills at DIY are just perfect for this channel
nope
no
Yup
Yes
I think after this little series on fiberglass castings nobody should say that Nate isn’t perfect for the channel. He knows his stuff and is a great addition to the channel
Nate is a necessary part of the channel now. As the channel grew, Grant had an obligation to increase the quality of the content. One person can't possibly be in charge of design, creation, and editing. That's why Nate is here, so that Grant can do some behind the scenes work and make the videos we love. Keep up the good work :)
You nailed it! 👊👑
100% Agree buddy. :)
Hail Nate, The Duke of Random. Good job on this guy.
Great job this looks amazing! you should make a blue shell!
Should be wearing a respirator even outside. You don't want to breath the glass or fumes in.
Darktrio Spfx also he should wear THICCer gloves
Darktrio Spfx Shirt: "RANDOM HAPPENS"
Me: "Randomly not wearing a respirator is dangerous."
A mask at the very least, I got worried when I saw him polishing off the sharp edges with the rotary tool.
Airborne glass dust is NOT something you want in your lungs!
ok I got two things i would love for you guys to do!!!!
1. Can you show us how to make a Dragonball from dbz and also I was wondering while metal is molten is it still conductive? Thanks guys keep up the work Nate and Grant!! :D
The thing that measures conductivity is valance electrons. It’s the electrons on the outer shell of the atom. These shouldn’t change when metals are molten So yes they are just as conductive.
Molten states of certain metals do change conductive properties . I've read about it but forgot by now
Michael Lathberry search for ElectroBoom on TH-cam, He has loads of videos and covers this topic, Enjoy!
Actually I already discovered his channel and i love his work as well but i think I missed one of his videos talking about that. Would have to find it :)
i love this channel even more now because of Nate.like if you agree
Guys, thanks for doing this video series! I've been wanting to do a fiber-glass casting project for a couple years now, but held-off because of how complex the process seemed. However, I have followed the instructions in many of your past videos (router table, hot wire cutter, and metal melting kiln to name a few) and always gotten great results. Now I think I will tackle that fiberglass casting!
Good stuff! Why are so many people complaining! Nate is a beast!! Really cool project!!!
you know I don't want Grant to leave but if he has to Nate would be my number one choice.
You guys should experiment with magnesium powder and other chemicals to make different kinds of black power for beautiful fireworks!💥
BTW I love you guys and I have been subbed since the beginning!❤️
Also I think Nate is doing a great job keeping the channel going while Grant is working on “The Big Project” and I think it was smart to do this so we get double the videos and better quality. Keep up the good work!👍🏽
At first I didn’t like Nate but I’m getting used to him and he does a very good job 👍
Wouldnt mind seeing another project like this in the future
this chanel is the best of youtube
Erik Gyorfi No, it's the King of TH-cam! (get it? 😉😂)
Jay The Blue Jay The King of the Randomess of TH-cam
By the day-to-day thank you for the marathonic effort of producing a daily video- KOR rocks
Best channel I have ever seen in my life
Sanding Fiber glass without a respirator :/
the man is hard core what can you say
This was one of the best TH-cam videos I've ever seen.
There's a lot of comments saying where's grant and many people hating on Nate! Sometimes the past cannot always be. Things change and we should appreciate that he even uploads for us.
Hey Nate. In honor of Super Mario Odyssey, please try to make a drone with Cappy.
Yesterday's project worked great! I have a perfect fiberglass mold of my depression. 10/10 would mold again
I'm really more excited about the projects Nate is bringing up for us this time,
This thing is AWESOME!!!!
You have definitely earned my fandom Nate!!!
Seeing Nate brush the shell made me think of bob ross painting on a canvas. Great work!
Yay! Finally fiberglass on this channel!
FYI for anyone who plans to use fiberglass and resin. Where a respirator. Not a dusk mask or stuff like that. You need to wear a respirator. It is very toxic to inhale or ingest. Especially when sanding/grinding away at it.
Y’all are like the best TH-cam channel, there’s like no one better than y’all, keep up the awesome work.
As soon as I saw those cups I thought, he's going to find out soon enough that they aren't compatible.
I wonder what nate thought when he saw your comment...
What do you mean- not compatible?
@@rxz4140 the cup will start to sort of dissolve with the resin inside
@@rxz4140 Polyester (fiberglass) resin uses styrene, the styrene dissolves polystyrene cups (such as the popular red cups) chemically. Much like acetone will do to any ABS plastic. Clear cups are typically PET (polyethylene terephthalate) or PP (polypropylene) so that's what you should look for instead.
I'm Greatful that you guys are both here to make awesome vids for us!
Loving Nate, and the DIY, can he make a vacuum heat molding machine next,
It's always enjoyable to watch how you do a project you're very concise in your instructions can you walk everybody through it anybody could make a fiberglass mold for what you showed them
Turned out great!
This is one off my favorite channels throughout TH-cam and there are others but if I don’t want to watch them I can always go here and count on this channel to keep me occupied and not bored. 😄
Vice King of random Nate for 2018
It is AMAZING how such a small group of people can create such quality content in a matter of hours.
Nate look swag with sunglasses on 😎
Best channel EVER. I like the making things the primitive way videos the most.
Who thinks nate is a boss I do he uploads so much I love him
A HELPFUL TIP IF YOU DONT MIND MY INPUT. There's a chop mat gun that has the fiberglass mat in rope form an as you pull the trigger it sprays 1 inch pieces an soaks up the resin even an level so you don't get air bubbles , an unwanted sharp edges an a glass bubble roller helps smooth out the air bubbles . Hope this helps for future videos
Hey Grant and Nate! Great video. This is very inspiring and now I'm thinking about how I could apply these techniques to my own projects. I'm really enjoying the new content and I think Nate is a great addition to your TKOR team. Keep 'em coming!
-Brian
This is my favorite project on this channel. Will be using this in future projects!
I was super hungry while watching this video and the entire time I thought the resin looked like bbq sauce
this is the best video i've ever seen about fibreglass casting
Love the nerf ball idea
+Specific Love Creations yeah that really needs to happen doesn't it?!
Great to see a channel growing the correct way. Nate's a great addition.
You're doing great Nate !!
Meet is doing an awesome job for the TKR Channel tbh
Hope grant and Nate have a amazing day. Also love your videos
Who needs notifications when you are 24/7 on TH-cam
Wassup nate, Have a great day everyone !
I’m rewatching this one and I don’t think we ever got to see a follow up with a nurf ball. Think that would be super fun
This guy is being awesome. Great video man. Nate is rocking ;)
This is so "on brand"! Nice attention to detail, right down to the sunglasses!
Hello from me to people who hate nate I just wanna say why you all are so hated to nate because I see that nate doesn't give me any problem for taking grant place in this channel,I mean there must be a reason that why nate taking grant place in this channel like grant wanna help his friend nate to be popular like him so don't you hate nate give him some chance to prove us that he can help grant to make this channel more productive in youtube.can you try to think that nate have work so hard to make a new awsome video for us and no one appreciate his work,dont be a person who like to bullying people be a person who like to help other person.
and my message to nate I will always try to supporting two of you guys grant and nate.love you all.
and thanks to read my comment I really appreciate it if you read it.
P.S=who have a reason why nate must not gonna be the king of random host please reply this comment below.
I really wanna thank to you king of random for loving my comment.hope you guys have a bright future.
Very cool. Love the time put into making it again rather than just a showcase.
It'sa me Mario.
It's me you're mom
Jack gissel u
Sam Bhatt hi
I don't know what I would make, but this looks like a lot of fun!
This is what all the Grant lovers want, I see. Nate do more gaming related stuffz, great work!
You can also apply a layer of Body Filler (Bondo) to make the surface smoother, and fill up any holes (then sand and fill again). Also, with the idea of the foam, you can apply the fibreglass to the foam after demolding it. That way you can have a solid version of the prop that can resist a bit more beating up, and also drill holes to screw on other parts (Maybe a blue shell? XD).
Awesome job!! I definitely want to try something like this out
That shell turned out very nice. Cool project!
we want grant......... ( afterward)
i change my mind we want both together even this guy is doing a lot of hard work
This is cool learning how fiber glass works cause I just broke my 1-4 metatarsals on my left foot and they gave me a splint with fiberglass
Hey Nate! Awesome video.
Mine Hero.
He's been thanking us quite a lot last few videos
plz cast a king of random logo with melted copper!!
New member, I’ve been looking for this tutorial. Lol when you were lining the turtle with the black air brush, first thing that popped in my head was I can use a sharpie, since I don’t know how to use an air brush machine. Thank you for the tutorial. Now it’s time for me to get started. Have a great day.
Nate
The nerf foam red shell sounds really cool looking forwards to that
I make Peach vids
Oh yup
Peach Daily BEST 10/10 XD
Peach Daily here
Peach Daily great... lmai
The sound pf cutting fiber glass is oddly satisfying
cool
I was ordering pizza in 2014 I heard a guy say the king of random is the best TH-cam channel ever
That’s how I started to watch your channel love you both
P.S if you’re wondering where grant is his on vacation
Wow that looks amazing
The past three days have been like edging....I'm glad this video finally came
nate is great
I didn't know that fibre glass could be used to mould things with Cloth! Thanks!!!
wow.. nate is awsome. . 😃👌👍
I have a new experiment idea: you should get some sort of thing the flys in the air (maybe a drone or balloon) and let it hover in the air for a whole day. Would it disappear and be somewhere else in the world due to earth’s rotation? Or would it go along and stay in the same area as earth spins around?
Gummy mario kart shell
That "Nerf ball" shell concept is actually a great idea for anyone who might not have a fancy toy car with which to use the fiberglass shell on.
Early/notification squad! Btw who just watches the video but never does the things in the video? Like if you do.
I think Nate is doing an amazing job !! Keep it up nate
Make a gummy shell with the mold plz like if you agree
How do you make it smooth? The paint really brings out the imperfections. Is there a way to smooth out all the imperfections?
Notificationsquad where u at??? 👊👑
Grant graced the end with his presence!!!!!!!!!
Nice Work. Thumbs up 👍👍👍
If fiberglass is small strands of glass try melting it with a blowtorch since its small then it should melt easy
Amazing
Since the dust from the grinding is plastic and glass, I suggest you wear a dust mask while grinding.
And if you want a smoother surface I assume you can use a primer on the fiberglass and sand it down to the desired finish.
I love your videos and I was wondering if you can send me one of those mini awrows and please do and Love you
i think it might help if after the 1st later of resin cured/dry, add 1 layer of mix resin+talc to make the surface of the resin smoother before adding the fiberglass layer to reduce any air bubble gap when the fiberglass cant bent deep enough.
never used fiberglass cloth so i dont really know how far it can bent but i do that with fiberglass math
Where is that guy... Whats his name again... Oh yeah Grant Thompson... Almost forgot about you... *PHEW*
Shrelerton Ikr why isnt Grant here anymore
He went on vacation, I wish he picked someone different that does things more grant style
EmbattledFrame6 no he's not vacation anymore that was a little while ago
Shrelerton he’s making bigger projects instead of smaller ones. Also watch the 1 hour vid he made a little while ago and he explains it pretty well
SureGaming I said went that's past tense dumbo
might wanna check out SMD Fiberglass resin, UV activated, amazing!
42 views, 42 comments..
Looks believable...
Compared to other videos..
60 likes and 42 views....
I LOVE this three part series!!!