My '09 TSX is leaking on the low side only. That must mean it's any seal between the compressor inlet and expansion valve, the rubber hose section to the compressor, or the evaporator. Any idea which is most likely? Last year I just had a leaky filler port, so I left the manifold valve on there. It worked fine for the season. I thought I'd replace the fill port this year and it'd be an easy fix. Dang.
This is actually fairly easy to diagnose. If you have a high low side then the compressor isn't pumping correctly. The expansion valve is bad if the low side goes into a vacuum or jumps around a lot while the engine is at idle.
Got a 2010 tsx, blows cold ac for awhile and stops. Blows warm humid air. Wasnt sure if its my compressor but someone told me at could be my expansion valve. Not sure on it but hopefully this layout is the same for the 2nd gen.
I replaced my expansion valve,ac compressor and ac evaporator and blows cool but not cold, what could be the reason it doesn’t blow super cold like before?
After market not sure what brand. Made in China cheap compressor. Maybe it fit Japan accord because honda used universal parts. I put 07 crv compressor to a 2013 civic is and it fit exactly the same one. The best is match your to the new one. Good luck buddy.
My '09 TSX is leaking on the low side only. That must mean it's any seal between the compressor inlet and expansion valve, the rubber hose section to the compressor, or the evaporator. Any idea which is most likely?
Last year I just had a leaky filler port, so I left the manifold valve on there. It worked fine for the season. I thought I'd replace the fill port this year and it'd be an easy fix. Dang.
This is actually fairly easy to diagnose. If you have a high low side then the compressor isn't pumping correctly. The expansion valve is bad if the low side goes into a vacuum or jumps around a lot while the engine is at idle.
thank you for showing how you change and where you change the O rings!! thank you!!
You welcome
Hello,the compressor you replace if it lasted or only a week? what brand was it compresor
Got a 2010 tsx, blows cold ac for awhile and stops. Blows warm humid air. Wasnt sure if its my compressor but someone told me at could be my expansion valve. Not sure on it but hopefully this layout is the same for the 2nd gen.
How long did it take to replace expansion valve?
I replaced my expansion valve,ac compressor and ac evaporator and blows cool but not cold, what could be the reason it doesn’t blow super cold like before?
Do you put enough freeon ? Or maybe you put too much freeon.
Some time your accumulator is old you need to replace it to get cold.
Subscribe please 🙏
What’s the name of the compressor? And can the compressor work for a Japan Honda Accord?
After market not sure what brand. Made in China cheap compressor. Maybe it fit Japan accord because honda used universal parts. I put 07 crv compressor to a 2013 civic is and it fit exactly the same one. The best is match your to the new one. Good luck buddy.
@@alltsab ok bro bless for ur information
You can diag the TX valve with Guages. If you have a proper refrigerate charge.
Do you know where is the a/c thermostat in this car?
I have a 05 TSX my ac compressor started to burn the belt could that be my compressor is out!!!!!!
Yes. replaceable compressor is out
Are you a mechanic or only you do it as the owner?
Both
Hello how onz is on compresor ??
Good
@@alltsab how many onza the pag oil is on compresor??
@@albertoreyes9704 don't remember i think either 14 or 16 oz look at your new compressor instructions because some compressor came with oil already.
Ok Tks
@@albertoreyes9704 help me subscribe ok buddy
You definitely missed showing how to get to the top screw above the vent/filter area...
How mush that job cust
Depends where you take it to. If Acura dealer I will say nearly 2 to 3k. Private auto repair 700 up to 1500.
Parts include?? Thanks
@@elbaron51 yes should include it
OMG you went through all that trouble removing the glove box etc, to find out it wasn't the expansion valve Jesus.
Do you know exactly what is wrong on your ac system? Expansion valve or ac compressor?