ฝัง
- เผยแพร่เมื่อ 29 ก.ค. 2015
- Air conditioning compressor not working? Learn how to properly replace your air conditioning compressor so you can get cold air this summer! I show you how to replace an ac compressor in a Toyota Tacoma but the process is similar for any car or truck. This works for an A/C compressor clutch that wont engage and if you are not getting cold air because the compressor is bad.
AC Manifold Gauges: amzn.to/1XrLgs6
Socket Set: amzn.to/1TOieNm
Universal Joint Socket: amzn.to/1Xb53LL
Serpentine Belt Tool: amzn.to/1R2hgv6
Torque Wrench: amzn.to/1VX9PO5
AC Compressor: amzn.to/2cVtg7f
Panel Clip Pliers: amzn.to/2or8Quc
How to Find an AC Leak: • How to Find AC Leaks i...
How to Properly Charge your AC System: • How to Properly Rechar...
How to Quick Charge your AC System: • How to Recharge Your C...
How to Replace an Alternator: • How to Replace an Alte...
Become a ChrisFix Subscriber→ th-cam.com/users/subscription_c...
Instagram→ / chrisfixit
Facebook→ / chrisfix8
Website → www.ChrisFixed.com
My Channel Home Page → / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. - ยานยนต์และพาหนะ
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 1](http://i.ytimg.com/vi/Qs5zdBqLn_8/mqdefault.jpg)
I watch him do it and I'm like.. "looks easy"
Then I go do it and all hell breaks loose.
Sergio Muñiz so damn true could imagine how my brake job gonna go when i get home lol
@@Antattack22 if ur bolts are rusted, i will pray for u my friend :)
Sergio Muñiz Right? I looked at mine and said (this will turn into a shit show real quick), then I went back in the house.
Sergio Muñiz if it were as easy as it looks on TH-cam it wouldn't be half the fun that it is for a normal person
@@2_fitnesss523
Before you start loosening any bolts spray WD40 15 to 20 minutes prior to start wrenching.
You'll be gladd you did.
Bolts will come off much easier.
ChrisFix intro from 2015:
*chill voice* "Hey guys, Chris Fix here"
Chris Fix intro today:
*WWE ring announcer voice* "HEY GUYS, CHRIS FIX HERE!!"
I was thinking the same thing right now
Right my first thought 😂😂
Lol Gotta love the enthusiasm.
True
Chris fix making that TH-cam $ now.
Fyi, auto zone and o reilly’s will lend out these ac tools
Most underrated helpful comment
FYI: you buy the tool and then return it for a refund. If you don't return it or you damage it you paid full price for a used tool.
I live in Canada and recently found out that Canadian Tire lends out a lot of these kinds of tools too, including caliper tools.
I buy some tools at Harbor freight..very cheap
He never even said a bad word. Not 1 F word.
🤣 hmmm, that is true, Not a single bad word, he must be an alien or something🤣
@@tahaplh1 or lots of patience
The magic of editing
Yeah I appreciate that!
That we know of. Editing is a wonderful tool lol
It's disgusting how easy you make it look!! Nice video!
hahaha
For real, I have an 06 Acura TL with a compressor clutch that's broken, and the compressor is buried under the alternator in an almost impossible-to-reach spot with no other access point, dammit Acura >:( at least I now know why my mechanic wants $900+ to replace it.
+CrowMeister42 lol, $900? Yeah, I'd learn to do it myself for that price and spend absolutely $0 on labor costs. That's a lot of money.
To top it off he was gonna put a rebuilt compressor, and I prefer new since the rebuilt ones aren't as good and they're not built right and break again anyways. The job wasn't as hard as I originally thought, had to remove one of the rad fans for extra room, along with the alternator and serpentine belt. New compressor was around 390 with limited lifetime warranty, plus 110 to get it vacuumed/flush/fill new refrigerant, now it blows ice cold and saved 400 bucks :D
+CrowMeister Good deal, my man!
Good job! I consider Chris as the best car TH-camr ever! The best camera work, the best sound. I don't speak English fluently but understand 100% of the narrative.
Thanks a lot Andrey!
Hi Chris, get video, I have a 2008 Tacoma that needs a a/c compressor, I can't find the link to where you got yours? Please help. thank you
@@chrisfix I need a video on how to replace condenser and expansion valve also
I don't even need to change my compressor but it's still very enjoyable to watch someone competent do a great job.
I’ve watched every single video chris has made over 2 times each, helps cure my boredom and learn a thing or two.
I've only been watching for a couple of months and I have learned so much even though I already did a good amount of the work myself. This channel has help me be more technical about my process but also thought me really cool stuff like replacing the AC compressor and the entire suspension. This channel is easily the best car repair channel on youtube.
@@MrSupernova111 Absolutely is!
Same
This is whats wrong with society. Everyone wasting time watching something they won't attempt and telling themselves thwyre learning. It's the total pay for college in something ull never use generation. Then u think ur smarter but if i sat u in front of any of these tasks to do u couldnt do them because application is completely different from theory.
ChrisFix has helped me out so many times, so I don't want him to take my critic in the wrong way. I have a 2004 Honda Accord and needed to change the compressor, this video helped me out immensely. But...the oil that comes with Denso Compressors is only for shipping purposes and needs to be drained, and filled to the proper amount. Thankfully my new compressor was not ruined but caught it in time. Thank you Chris.
This is a super helpful comment. The new compressor I got in the mail has instructions that say to drain the oil and dispose of it. And I'm thinking "you already went through the trouble to put the right amount in, so why would I replace it??" I had resolved to replace it anyway and follow the instructions, but I'm glad to read this comment and be validated in my decision :)
Thanks...good to know.
So you have to buy more oil? Son of a biscuit
@@supers0nic77😂 i dont know why this comment made me chuckle
The quality and camera angles are amazing. Great video as always.
Alejandro Barocio Awesome! I worked hard on getting good angles and it was tough because it was so tight down there! I am glad you liked the camera angles and appreciate the support as always bud!
ChrisFix I am still trying to figure out how the hell you fit the camera down to see the pulley tensioner haha
It's like he has a camera man and Hollywood editors. High quality videos. Excellent job Chris!
One of the most amazing aspects of your videos is the way you film your work and the quality of the image and light in those narrow spaces. Well done and chears from a Greek fan with a Dodge caliber. (Already changed my spark plugs, thermostat, spraypainted wheels inspired by your videos and general approach to fixes. Now i ll try to mark my tools with the vinegar trik)
Alejandr
Excellent vids! Gave me enough courage to replace the compressor and recharged the system myself! So nice to have working a/c again in this Carolina summer heat and humidity! You made a difference to me and my family!
That's awesome! Thanks a lot Ben!
good luck replacing it again in few years because of too much oil in the system LOL
How did you manage to get the old coolant out of the system prior to this job?
@@AudreysKitchen look up how to properly recharge your ac system by @chrisfix
A man, will an ac clutch that is not engaging cause the radiator fans to not come on also?
My compression just went out, and I'm SOOO thankful that it sits on top of the engine. -lol-
One of the most amazing aspects of your videos is the way you film your work and the quality of the image and light in those narrow spaces.
very good
Shit dealer wanted 2000 to replace compressor an condensor ,Accumulator Drier ,Expansion Valve and do a flush on 96 Nissan . I bought all the parts on eBay for 340 and then another 300 for all the tools guages flush , few cans of coolant and vacum pump and did a complete job and it saved me close to 1400 in my pocket plus i still have all the tools.
what about the man hours?
@@defensegeneral9893 those hours he worked on that car are all MAN hours 😎
Its a nice feeling to fix things, well done.
You WILL use them again. Help a friend.
@@defensegeneral9893 4 hours/$1000
you're some sort of mechanical wizard. swivel socket, deep well, extension, a breaker bar, and one handed bravo chris you've done it again blew my mind
My car don't even have these problems. Lol I'm just watching to be watching 😂
Your Car: "Hold my beer! Me and your AC compressor have beef to settle!"
Same here. Just got a new car to replace my 2002 car in 2017 (from Philippines) Toyota Innova
strawberryvines SAME like well one day when it does i know what to do 😂
Hot af here. My compressor just seized up fml 😭
@@supers0nic77 aww man😥 Sorry about that. My brother literally has been learning to do his own car repairs fron TH-cam. Hope you can get the parts & repair yourself.
Chris, you're a BEAST when it comes to your wonderful videos. You've been at this a long time and your efforts are amazing. Thanks so much for taking the time. Love to watch your efforts and love hearing your voice. You're a natural!
The amount of corrosion is absolutely horrifying.
Love your videos BTW. Keep it up!
This isnt even that bad! Cars up in the Northeast get real bad!
Just wanted to say thanks to your video I’ve been able to fix two cars’ a/c systems using your videos. 🤙🏻
High quality video, straight to the point, most importantly you didn't skip any steps for every bolt installation and removal, and you mentioned all the parts requiring specific attention and lubricating.
Afterr watching a lot of other auto service/repair videos, it is very refreshing to see the stable, clear, concise shots and thorough explanations provided in your videos. Well done sir!
CONGRATS ON 300k subs! I started following u at 70k and you have blown up! I know why your videos are the best!
SNESJedi Thanks a lot man! I really appreciate all of the support!
4.6 milli now sunny boi!
Chris fix is the best! Not afraid to give his knowledge and actually does a step by step! I’ve learned so much from his videos!
Great coverage in the whole aspect of replacing the compressor. Other mechanic videos were not as clear and only included some parts of replacing the compressor. Good job in explaining in detail!! I will try doing this myself.😢 A quote from a mechanic was $1200 to fix & part was $650 when I can purchase for $260 myself.
Lucky you. I was quoted $ 1700
fucking awesome. Thanks man. You may not think it but you are helping out a lot of people that dont have the luxury of paying for repairs. This is a good thing. Kudos.
Thanks! I am glad the videos are helpful!
Your'e welcome. I just let a couple of friends know about your vids too. Very thorough, very clear, no camera shaking, you switch camera locations to get better views, and you cover all the bases. I have subscribed now and look forward to learning more. Thanks.
Honestly, I'd say it's a luxury to be able to fix it yourself. So many shops WAY overcharge you on hourly rates. I've saved thousands of dollars doing my own repairs
Basil Estep indeed it’s a luxury to be able to do it yourself to not get F’d in the ass by shop mechanics’ outrageous prices.
im only 14 so i dont have a car but im definently learning haha
_.Dank.Memes._ good shit man
You're 16 now congratulations. Do you have a car now?
Respect!
Yo bro, you got a car yet?
_.Dank.Memes._ do you have a car now ?
I watch his video just for fun but man knows EVERYTHING and I mean EVERYTHING
Always love your DIYs. You and a few other TH-camrs helped increase my confidence to get away from dealership-dependence and really get involved with my vehicles. Thanks
your videos are great, always amazing detail especially for those without experience, thank you for your work!
fpstina Thanks a lot! I am glad that my videos are helpful and you are learning a lot! That is the goal!
Chris!!! These camera angles are amazing! Keep em coming!
***** Awesome! I worked hard to get good angles and it was really tight down there so I am glad!
ChrisFix What is that car you're working on
08 tacoma
Chrisfix I love your videos
@@chrisfix when She says its my First Time.😂✅
I followed the advice in your video and got it done like a champ! I replaced the AC compressor, Condensor and dryer. Had local shop evac and recharge for a decent fee. Thanks Chris!!
A small tip I have:
Change the hardware out if it's really rusted or if it's made of aluminum. I have had screws and bolts break or get stripped to the point where you can't remove them through normal means. This is especially important if your car is over 20 years old. Ie. 90s or older
Thanks so much for the vid! Keep them coming man, us DIY'selfers really appreciate it!
No problem Kyle!
Another great video, you make working on a car look soooo easy. Keep up the great work. BTW I like the editing on your videos.
cal88usa Thanks a lot! I really appreciate the support and feedback bud!
I love the way you detail your work! Epic video bro!🙌🏽
I am a Marine Engineer who work in ship but your videos are really inspiring me to work at home with our own Car. Great Buddy keep rocking
Hey ChrisFix! Your videos are very helpful and have helped me with. Lot of car issues! Dude keep making these videos until you have nothing left to cover! Your in depth reports on car issues helped me debunk some issues and highlight others! Keeps up the good videos brotha'
I love QUALITY repair videos!
Thanks!!!
Thanks for posting this great video Mr. ChrisFix. You simplified it enough so a DIY person understands and can do the job the correct way.
I liked this channel a lot. For that fact that you explain how, why, and what to replace the parts needed to be replace. I been working on my own and friends cars for about 4-5 years now and videos like your channel have definitely help out a person like myself who’s self taught and is always tryna learn something new. I like that you explain about the part and how to diagnose the problem. While you replacing the part your explaining more about the part as you go so it’s helpful. Keep making videos like you do I always watch your videos because there helpful.
Awesome Chris. Thank you. You are a top notch mechanic instructor.
Thanks a lot!
Such a great video! The editing was fantastic to not let the content drag. So many videos out there show you the mechanic getting frustrated at a point and they just keep recording worthless footage. Hats off to you!
Thank you!
@@chrisfixy
ChrisFix I just replaced the AC compressor in my Jaguar XType then charged it using this video and the recharge. It worked great and I did everything like you described for under $400 buying new parts on Amazon. I was very nervous about this job but took great notes and it went very smooth. Thank you
A video on replacing the a/c evaporator would be amazing! The job is very involved which scares the DIYers away and very expensive to have done at a shop.
Your videos are really informative and easy to follow. Definitely one of my favorite channels for car maintenance. Great job.
Thanks Jason!
this video makes me realize how old the second gen tacomas are...
and wow what a pita job with the location
This video saved me about 1000 dollars though it took me 22 hours to do because of other complications that should be expected when you work on your own car, and I am an amateur. But I had lots of time to do it, and not all that much money. Would highly recommend doing it on your own. If I were to do it again I would expect anywhere from 4 to 10 hours depending on the car now that I know exactly what I'm doing. Now my AC blows coooold all thanks to this awesome guide video.
Thank you for all of your videos! Very informative which is great for a guy like me who’s a bit timid when working on my car! And your camera angles are great!
Good job Chris. Great video. Simple and straight to the point. Very clear video angles and audio is very audible. Keep up the good work.
Fantastic video with clear explanation and great video quality. Thanks!
auto shops wanted to charge $800 to install a new pulley on my 2005 ford explorer that is located on top... and then i watch this video... this is easy... i thought there was waaaayyyy more to it then that! thanks for the video.
This video is so pleasant to watch, your tone is so much more natural and less high-pitched
you doing a good job. helping us thanks so much
+Junior Barrios thanks! I'm glad the videos are helpful!
I just love that ratchet sound
OMG hi
Yo so do I!!
@Bruce Lee omg lol
Nice Job Chris....Even though I do not have to replace anything I love watching and learning. You did not skip any steps showing what to do and that is awesome!
Thank you ChrisFix. Excellent explanation skills. Perfect camera angles.
Good video. Being EPA certified I appreciate you telling viewers to have their system recovered before taking lines off and such.
George W Thanks!
its always best to release all refrigerant directly in the open air to help condition the cloud seals
George W 1313george
where to go for the system recovered? do they charge any money for doing that? if they, how much money will they charge? ~100$?
wolf north should only be around 10-20 if anything at all. It costs the shop nothing but a few minutes
Chris, how do you know some of these little 'tips and tricks'?
Seriously tho. My brother went to school to become a mechanic, and my dad's been working on cars for 50+ years and both of them don't know some of these things.
I've been watching your videos for a long time, and both of them are impressed when I do some of the things I do because of your videos. Any insight on how you learned about this stuff?
Im curious too
He's obviously intelligent. I believe he went to Rutgers for engineering of some sort. Where he actually learned to work on cars, well no one will know.
you learn alot from the people around you but also some people just have very good problem solving skills and they can jimmy rig anything but on a very advanced level lol. just understanding how things work pretty much.
Success breeds success. The income from his youtube allows him to expand his knowledge base and allows him to have resources beyond what he started with. For example: his photography. He's clearly invested heavily in cameras & lighting, and that allows him to manage lighting and tight spaces. Wait till he gets his colonoscopy cam! If you watch, occasionally you'll see that he has a camera crew. That's what success brings. It could be that he conned his buddies into shooting for him early, which greatly enhanced his early production. Now they are paid positions. Unknown if he's kept his 'buddies' from the salad months.
That was the best video work I have ever seen. Thanks for making it simple and not skipping anything. I did sub!
6:12 "Hmm, I wonder how many extensions I need"
Toyota: "Yes"
When you change the A/C compressor you're suppose to change the A/C accumulator as well. Doing so filters out the contaminants and absorbs any moisture that might have entered the system. If moisture is present in the system it will turn into acid and acid is not good for metal. Another note, if you don't install a new accumulator some of the A/C compressors' warranty will be voided.
Eric Lao there is always somebody that thinks they know more than the person on the video
eric lao is correct however
He's completely RIGHT!
Knowledge is power Mr Kennon. I love Chris's videos but I always appreciate others bringing their particular experience to the table and I think Chris does also.
Eric K., warranty on compressors state that certain things must be replaced, such as the accumulator or receiver/driver, orifice tube, and in most cases today, the condenser. Most also require you to flush the system, and all require that ALL of those purchases be on the same receipt for the warranty to be valid. Mr. Lao is correct, there is desiccant inside the accumulator, which absorbs moisture, and the oil can become acidic over time, thus eating away at seals and the such inside the system. It's $50 or less to replace such a simple component and to perform a flush, why not do it when dropping $150 to $300 on a compressor?
Thanks your videos are incredibly helpful. My ac compressor needs replacing, I'm lucky enough to have a Tacoma too, so this is the perfect step by step. Please keep up these videos!
Update! 1 year later my A/C is still cold!
Got my compressor replaced on a 2015 Toyota Corolla today. Ice Cold! thanks for the detailed and to the point video
Please more tacoma parts replacement videos been watching your DIYs since 2015
Hey Chris! Love the videos! Thanks so much for taking the time to help us weekend mechanics. Quick question, my compressor failed due to gasket leaking like yours. Did you flush the A/C system before recharging?
I love how your oil filter is right at the top !! I'm jealous .
Thank you so much for sharing these clear and easy to understand steps!! 🙏🙏🙏
I love this guy videos, because he expain everything very well.
Hey Chris. I love your videos man. You make me want to become a mechanic. You make everything very clear and easy. Quick question (although I've asked a bunch) you have said, in a different video, not to use a universal adapter with a torque wrench, but you used it in this video. Is there exceptions to that rule? Could that damage the torque wrench?
It looks like he kept the ratchet and universal adapter relatively straight thereby he avoided not torquing it enough to where it would come loose.
I have one thing to bring up, I was told that anytime you break the system and expose it to air you should always replace the dryer to make sure you have no moisture in the system. If you have any water in the system it can damage the compressor or the high to low pressure valve( sorry I forgot the name of it). Pulling a vacuum does not get rid of water. Was I told wrong or why did you not change the dryer out?
Vacuum means nothing in there. The dryer is extra insurance to make sure there's no moisture in it. Change all the o rings in the air con pipes
i love looking something up for my subie and find to see chris made a video!!!
Very good job, very professional and clear explanations. Thank you and keep going.
Thanks for the instructional video Chris! Another clear and precise to the point instructional video. No background tunes and the camera is steady. GREAT JOB!!!
When I ordered the gauge set from Amazon it showed up at my door in about 16 hours. I chose regular shipping too. Blew my mind. Ordered at 6pm and it was at my door at 10am the next morning. I thought there was some kind of mistake, I've never received something that fast before. Amazon must be using rocket powered delivery drones.
***** That is crazy! I wish they would do that for me haha
Excellent video as always! Also have to give a 2 thumbs up to the cameraman who did an excellent job.. !!!
Gave me the confidence to take a shot at doing it next weekend!
Thanks!
make a vid ! how to fix pipe lines for ac (high and low pressure)
thank you...
Thank you soooooooo much. Legit replaced it by myself with your help😊. Thank you again. Now, to watch your video on charging ac compressor. Hands down best video.
I'm glad you were able to replace it yourself!
Did this job many, many years ago before TH-cam had everything under the sun. Took me hours to figure out how to release the tension on that belt. All the guides said "remove belt tension" but I didn't know you had to rotate the spring loaded tensionser like that. Eventually figured it out but dang this could've saved me some time and fury.
When replacing a compressor some manufacturers require the lines to be flushed for
warranty. Did you make a video that shows the process you use?
I did not because this compressor didnt grenade. A flush is needed if there is contamination inside the lines and in this case it was just a leak.
So you do have to use a vacuum pump when you get everything back together. Air in the system is actually a problem.
You should pressure test with nitrogen also.
That is shown in the next video of the series.
You explain things as clear as a bell. Much appreciated.
Thanks!
Very informative and detailed, excellent job, keep up the good work. We are learning and saving money. Thank YOU.
chris fix:
The man
The Myth
*THE LEGEND*
Who else watches these videos over and over again for fun
Metaphysicalkid Gaming you and 3 other guys.
I can't tell you how much I've learned from Chris Fix. Thank you!
Bro, you legend! I just picked up an '04 4Runner and I started hearing noises from the compressor clutch. I think it'll give out in the next few months... I was preparing for the job by looking for videos to see what I was in for and I couldn't find any for my engine and car and I stumbled across this and that Tacoma just so happens to have the same engine and whole setup as my 4Runner, wild! Thank you!
same kinda, '00 4runner tho and the belt slips off because the compressor pulley is too far forward by about a half inch. pisses me off because it just started doing it after i bought the damn thing
Okay, I have a 2007 Honda Fit with 296,000 miles on it. The engine still runs strong! I have some front suspension wear, and Chris' recent Del Sol front suspension video has convinced me to replace most/all of my front suspension.
Now my A/C has also failed. I suspect it has multiple problems (leaks + tired compressor, etc.). I'm thinking of just replacing ALL the A/C components (including lines, condenser, evaporator, etc. -- basically EVERYTHING involving the refrigeration system, plus the condenser fan assembly. I'll keep the controls and cabin blower motor, etc.) Ignore the financial questions about the value of the car, blah blah blah. Assume I'm okay with the total parts cost and I'm doing all the work myself that I possibly can (everything except recovering the old refrigerant). Does this sound reasonable? It looks to me like replacing the lines, seals, etc. with all new would save me the time and effort of tracking down leaks, flushing the existing system, etc. And at the end I'd have a whole new system that should last several more years. Does this sound reasonable, or am I completely off my rocker???
No more nuts than I am...should see all the things I've done and am doing to my 2003 Ranger...
Buddy has the same year Fit I "get" to work on so he can save money. You'll find out rapidly that working in that engine compartment is somewhat nightmarish.
You can keep your evaporator, unless it leaks. Everything else is reasonable when you love your old car.
I wish I'd seen this video before the compressor on my 2010 Rav4 went bad a few years ago. Dealer got a good chunk of change out of me to replace that.
These tutorials are masterful. I've only ever changed batteries and oil on my cars, and these videos actually make me a little excited to go see if I can figure out problems and fix them. Amazing work, Chris.
did anything under the hood squeak or squeal for a little while immediently afterwards?
Best how to video I've ever seen on TH-cam!
Thanks!
Great videos Chris. Because of u I'm becoming a mechanic
Aircraft air conditioners work with rapid expansion by taking compressed bleed air from the engines or apu and expanding it quickly which cools it down.... no refrigerant or chemicals lol... pretty simple process but u need a lot of air and it cools it down so much u actually see the vapor come out the vents if it's humid out
Ira Friedman That is awesome! Thanks for sharing that. When I flew out to see test drive the Elio, I was wondering how the AC worked!
Thats how ALL ac systems work. Anytime theres a pressure drop theres a temperture drop too. In cars its either a oriface tube or thermal expansion valve (txv). But thats cool to know how aircrafts run their stuff.
Toyota:
Let’s hide our compressor way down there so no one can replace it
You should see the process to getting to a tundra starter..its like they want you to scrap the truck instead
chris can do it
@@foxtride7890 Do you basically have to take the intake manifold off, right?
@@lordvader3283 Yea and like 7 other things
@ChrisFix this is awesome, i have enjoyed watching lots of your videos so far and have learnt a trick or two, but was totally happy to see this video since you are working a Gen 2 Tacoma which i own and have A/C issues. Yes there is other videos out there on Tacoma a/c replacement but i enjoy your video process and explanation as well helping beginner home enthusiast and beyond. Thanks for the videos!
Love he’s vídeos he is the best Chris do more videos for us bro I already watch all and repeat bunch of them lol 😂
its always best to release all refrigerant directly in the open air to help condition the cloud seals
The penguins like it, too
I really hope anyone who reads this learned in science how bad Freon is for the environment
Maverick r-134a bad for the environment? U sure
R134 is vegan. R12 wasn't. Now you know
Dont you need to replace the drier or accumulator everytime you open the ac system lines?
You should, yes. Also the expansion device and flush out the remaining oil that has circulated into the system. But a catch-22 on that is the parallel style micro channel condensers in use now cannot be flushed and are recommended to be replaced. The place I get my service compressors from will not honor warranty unless all of the above is completed. However, this video does a great job of showing the gist of the repair and also the compressor did not fail mechanically--it was only leaking. This repair will probably last the remaining life of vehicle.
You are a life saver !!! I was just quoted by Toyota for $1400 to change my ac air compressor. Eff that I’m going to do it myself! Thank you!!!
Thanks man. I'm about to get an 07 mazda 3 that needs a new compressor and I'm definitely replacing it myself. I've done just about everything else on cars before but never an AC compressor.