Symptoms of a Bad and Failing Oil Pressure Sensor Switch | Oil Pressure Gauge at 0 20 80 | Light On
ฝัง
- เผยแพร่เมื่อ 29 ม.ค. 2023
- Symptoms of a bad and failing oil pressure sensor. If the oil pressure gauag shows 0, 20, 60 or 80 then it is possible the oil pressure sensor is faulty. If the oil warning light is on, it should be inspected.
- ยานยนต์และพาหนะ
This is a great Mechanic, the explanation factor has to be highlighted, without bs he tells it like it is. Thank you, Brother, keepin' it real, it's the best deal. For this, I'm a new sub.
This is EXACTLY what was happening to my oil gauge, checked my sensor and was covered in oil, Amazon had it for 20 bucks, easy fix, THANK YOU 🙏
Thank you for posting this video, this is the first time I've visited your page and I find it awesome that you are teaching us!
This guy knows his stuff love his videos hes the man
So mine is leaking at the moment so it's time for a replacement. Almost time for an oil change as well. Thanks man for the heads up 🤙🏼
Great content with fast & detailed information! Because of this, I am a new subscriber! Looking forward to other videos. Thank you! 👍
Thank you for this video. Very good explanation. I understand how it works now.
Thank you! You make it easy to understand.
Thank you so much. Mine was doing this and is now fixed.
Thanx for tips and tricks bro!!!
Thank you for your tips
Great advice to check my 1995 caddy deville
Good idea , got sense .Thank you.
Great Video Mine stuck at 0 with no Problems Time to Change Asap
Excellent! Very helpful. Thanks!
This happened to my first engine on my frontier 2006. My mechanic insisted that it was a bad piston rod so I had to replace it with a new one still under warranty luckily. Honestly I think he did to make money. Now its doing it again. The needle goes up and down but no issues with the motor.
Good info buddy thank you
Any suggestions on what i can do to get rid of my rocker arm/lifters from clicking when going above 2000rpm? My mechanic said there was no damage internally but the there are a whole crap of sludge. And to use seafoam prior to doing oil changes (every 1,000 miles) and hopefully it goes away.
Thanks!
Question? I have a 2005 Honda odyssey EXL and I get the code B1175 50 and I looked it up and said it’s not ready the sending unit but it’s reading fuel, any clue? Thanks!!
thank you i have my answer...
Question:
I have a 2013 ford edge 3.7....is the oil pressure sensor,and an oil pressure switch,the same thing?
Having an issue at the moment that’s stressing me out. Four days ago I noticed when I would take sharp turns I’d get “ check engine oil level “ and as soon as I’d drive normal it would go away , and it’s been doing that ever since. I checked my oil yesterday by looking at the dipstick and it was dry. I decided to do an oil change and when I jacked up my car I noticed it there was dried up oil around the oil filter area and alongside other spots by it. I assumed that maybe I didn’t tighten the filter enough, so I made sure to do it this time lol . I finished doing the oil change and drove it a bit and still got the light that says “ check engine oil level “when I took a sharp turn . As soon as I got back to my place I checked the dipstick again and it was still dry
Wow! You’re very lucky you didn’t blow it up.
appreciate the informative video man, subscribed :thumbsup:
Car drives fine gave me p520 code, jeep runs fine, can I drive the jeep for a few days or not recommended?
I have a 2001 mercury grand marquis and the oil light comes on most times lately when i stepped on the brake pedal before and after i got a oil change and the brake fluid is clean & full, Is this my problem??
My 2004.5 LLY Chevy 2500 duramax just started throwing a low oil pressure warning and won’t stop chiming. I drove the truck for an hour without anything happening to the truck so I’m guessing the truck is getting oil pressure but the cluster or sensor is gone. Wouldn’t the truck start knocking or lose performance after an hour of driving with zero oil pressure ?
thanks for the no-nonsense info...can you point me to where this is located on a 7.3 diesel 2001 Ford E series van?
Thanks for the information.
What triggers a p0700 code on 2010 Yukon?
Eix am on peugeot 508 and I keep getting oil pressure faulty stop engine,can it be switch or its oil pump packing up
Small thought, it may not make sense and I'm sure after years of engineering this shouldnt be a problem but its a thought... After an oil change or replacing the oil could the small port in the sensor make it hard for the oil to flow in causing air to be trapped in it.
How about pressure dropping then raising back up by restarting or reving the engine
Hi, is the oil pressure switch and oil pressure switch the same thing? Thanks
My oil light came on a few days ago but only when idling. It’s been cold as hell recently so I don’t know if that’s the reason why.
If you've been driving the car on short trips, is diesel, and is cold outside, then it can happen that there's carbonization in the engine or some part is clogged somewhere. An engine flush followed by oil and filter change can fix it. Air filter replacement is also advisable. But it can be something else such as engine gasket leaks, or even sludge accumulation in an oil strainer under the engine. To know best, you can hook up your car on a OBD scanner and look for sensors in the oil pressure and oil pressure control solenoid. Sometimes, the solenoid cannot fire because it's digitally controlled and dependent on the correct oil pressure to activate the release valve when you remove the foot from the gas pedal, resulting in errors like this. Firstly, the pressure itself at idle should be normal as well as at particular RPMs. Hope this helps.
My car jumps like it wants to stall no check engine lights and I just got it back from the shop didn't really want to take it back to said shop cuz if they didn't fix the issue why would I take it back and let them charge me again not to fix the problem but just didn't know what to do any info would help but acts like bad fuel or faulty fuel pump please help
have a tick on my 04 envoy 4.2 when cold and getting worse, no lifters so can't see what it could be, changed oil and filter 2,000 miles ago but it was not doing it then.
I have my oil pressure gage going to the 80 psi position. And no sign of leakage. Could it be a bad gage or grounding issue?
I have the E350 bus with the 7.3. I changed the ICP sensor and it would still die after going about 40. Should I change the IPR valve? What else should I look for, thanks man. Great video
Bro, what is the sensor that sits on top of a metal box right in front of the fuel filter? Oh and I’m working on the 7.3 Van
Hi there would this cause a noise as well?
I have a 00 Buick Sabre runs fine but after 30 mins or so oil pressure goes up n down u think k it's the same
I’m getting no light oil pressures almost maxed out on a 94 k3500 454 can’t figure it out and I’m not getting oil to the top of the block
Hey man, please help me with my isuzu dmax 2007..
My formen told me he use 15-40 semi synthetic engine oil..
Why when i started my engine, oil pressure light comes on however they go away as soon as i hit the gas. But when i release the gas it will appear again…after driving for 20-30 minutes it will go away..Any ideas? I already got my oil pressure sensor and oil pump changed..im also changed my head engine totally it cost me MYR8000
Please help man, i really dont want my engine to broke again…im in Malaysia, should i change to 20w50 engine oil?
Hmm, I got one where the needle will sometimes fall to zero for about a second and then back to normal. Usually does it on a blue moon (don’t drive it a lot now).
On my car it should be an on and off type of deal.
So my assumption is, it’s going bad?
I’ve had the engine rebuilt so I would think it’s the actual pump as it should be a new unit.
My zr2 s10 has 329K miles and it showed 0 psi out of nowhere and turned off while I was driving, but it has done it a few days at a time, does this mean the sensor has finally given up, or has the switch given up?
what if my pressure gauge says it’s at max then after driving for a bit and letting it idle goes down to half
My oil signal goes to middle and go to low then come back to middle while cruising? What should i do?
My oil pressure says 99 regardless of oil changes and for the ‘12 300c it’s in the most annoying spot to get to but I need to change it
I have ? My check engine light on 60 series keep coming on & off only when I’m loaded then I let off the gas pedal accelerate again it comes on again
BUT I CHANGED SENSOR AND NEEDLE STILL DOWN AND ENGUNE STILL TURNS OFF WHILE STEPPING ON BREAK AT STOP SIGNS OR AFTER DRIVING & STOPPING TO TURN WHAT CAN IT BE????????
My 2008 Mazda 6 engine oil light flickering while in low speed. But the light is off while in higher speed.
Is it a problem with OPS?
Thanks
Most likely but first check oil level.
What about a no start condition I had a 5024 in the back end and didn’t have a actual light on the dash
That’s what mines doing now … just stopped off here to see if someone else had that problem
Hi guys my oil pressure light comes on but i have no leaks and my car drives normal but i did throw a little bit over the max line,so can the overthrow coz that light to come on
I got a 2016 Hyundai Tucson with oil light flickering, checked oil and it’s good, I replaced the oil pressure switch with a dealer one. So it has new switch and oil level is full but oil light keeps flickering. What can it be? Thanks in advance 🙏🏼
The wiring, bad oil filter, or engine bearing clearance are too high.
So you're saying you can have a bad oil filter just about Dew for an oil change
Having some problem gave me a low oil pressure code while driving so I added some oil then drove a Lil bit then it came back on low oil pressure was keep flickering with the red oil symbol what u think
If you overfill it will cause the same type of issue. Make sure you didn’t over fill
Please my es350 show oil level low after doing the servicing what could be th e problem am confused
My oil light is coming on but after a some time it goes of again. And my oil level in engin is totaly fine. Do what can be the problem
I Just Bought one used 2008 grand vitara v6 2.7 lts.
They reap me off
Now i m dealing with it
Anyways
The engine starts on time
(No hesitation at all)
Temperature looks good after an hour of driving
Runs pretty good on flat surfaces...except hills
My problem is that
- the scanner plug doesn't work. (Can't read any codes)
- I Just found that they disconnect the oil sensor or knock sensor
- It looses power after warmed up going up a hill.
- it makes a rattling noise by the driver side of the engine.
I m fixing to run all types of tests ....
Oil pressure , engine pressure (compression)
Any other suggestions
Thanks for your advices
I have a vw beetle and my sensor is located below my ignition coil do i drain my oil first?
It's optional. Only a small amount of engine oil will flow out.
Thank you!
My oil pressure gage is sticking at around 20 sometimes 0. Just had a lot of work done some by mechanic some by me after my car broke down on the highway. New fuel filter & pump, all new spark plugs & wires, distributer, starter, thermostat.. I think that's all 😅
The coolant gage sometimes bounces still but I push on brakes and it goes down pretty fast. It doesn't seem to be overheating because the level hasn't gone down again.
The oil pressure was fine before this..
My 2013 gmc Sierra hangs out at around 20 but i got no check engine light and its running like the day i bought it. Just turned over to 76k miles
My 5.7 ram has normal oil pressure then an alarm and red light and guage falls flat. Cut it off, crank back immediately and perfect pressure till it does it again.. any ideas? Many Blessings, Kev
Same. Did u find a solution
Same issue. Usually happens on a mid-chilly morning 60°F or so. Restart engine, pressure works fine. Will change switch at next oil change.
Can the ac pressure sencor be the reason of my car overheating. I got a 1992 buick riviera 3.8 6 Cyl my pressure switch ac leaks were i connect the plug on to and my car overheats
Check the your engine temperature sensor or ETC that’s the culprit if the radiator and everything else is good usual place is near thermostats or side of engine block
@@rosieclark3661 thank you
Will it cause rough cold starts that smooths out after a minute or so?
No. All the oil pressure sensor is is a warning device. It has no affect on your cars performance whatsoever.
@@eliferguson3422 thank you
@@radianm6 no problem 👍
I'm replacing the oil sensor in my car and I want to know if I need to disconnect the battery since it is electrical or can I just change it without doing that step?? Thanks
Disconnect the battery first
Mine only comes on when im braking or making a a turn. It also started doing this after i messed up my brakes
Just got my engine swapped on my Denali and I drove it for like hour drove good and saw the oil pressure didn't not go up .... The my concerned and oil light didn't not come on
Has someone ever experienced loss of engine oil pressure only at high rpm? Mine keeps coming on at 70mph + but is fine at idle and lower speeds?!?
Do I need to drain oil before changing switch or can switch without anything
You can always just put the oil back in as long as it's clean
No need to drain. Make sure to check oil level after replacement.
My car peougeot oil indicat red light what happened
Will it cause engine noise?
It will not cause engine noise.
My question is that I get the low oil pressure when the weather is cold at 55 degress and not at hot or warm days. Can it be my sensor or is something else??
I think it just determines how the temperature is but if your worried ask a local mechanic to make sure
Did you figure it out? My 2008 Honda civic oil light just turned on for the first time and it’s been cold (-3)
What if it’s marking engine light w the code but nothing is happening
Most likely it's a faulty oil pressure sensor
is this related to over heating?
No. If your engine is overheating, then you probably are having low oil pressure.
hey man, just got my car with back from the shop with a new used engine a couple months ago. However when im driving for awhile and i get in traffic my temp gauge rises and oil pressure light comes on however they both go away as soon as i hit the gas. Any ideas? I got my oil pressure sensor fixed by them the day after i got it back and it continues to do it
How's the oil level?
Could be bad tolerances in the engine. If the crank etc are worn down, oil escapes and you lose pressure. Pressure can drop once the engine warms up (oil thins out), once you stop driving (engine begins idling under low load). This combined with loose tolerances means that insufficient pressure is produced to fully lubricate the engine. The overheating at idle could be a number of different things. Air bubbles in the coolant (wasn’t burped properly), low coolant, thermostat going bad, and worst case is the engine overheating due to poor lubrication at idle, or alternatively a head gasket leak. Can also be caused by a seriously jacked up water pump. My 2006 Colorado actually had both of your complaints. Oil pressure light would come on after heavy driving in hot weather when I came to a stop. This was fixed by simply installing a new sensor, old unit went bad. The coolant issue is something I’m still somewhat chasing, though I believe it was related to a poor fuel to air mixture that I corrected, as it has remained relatively steady since I completed work on it. I hope you can find out what’s wrong with your vehicle, surf some forums with a lot of different phrases; chances are someone else has had your symptoms.
Forgot to mention to check your fan clutch; if it’s gone bad it won’t engage and you won’t have additional assistance with airflow at a stop to help cool the engine bay. Very well may be a culprit with a used engine
Sold you a motor with bad main bearings probably, and or oil pump! Or both
Mine only comes on when I have the ignition only on , not the car is that weird or what
When my key is in the on position, the oil pressure light is supposed to stay on till the engine starts, but it does not. The light goes off. Think the sensor's bad.
My oil gauge sometimes jumps around back n forth from 0 to normal
My light comes on and when I accelerate goes off?
If I'm going up hill my jeep loses power. Hoping it's just the oil pressure sensor
I replaced mine about 6 months ago. Now it's leaking again.
I replaced mine,cleared the code and it comes right back on
Is it a fuse or relay for the VTEC oil solenoid I’m not sure the name of it, it plugs into the top of the VTEc oil solenoid, not the oil sensor that plugs into the side of the vtec
I’m referring to the one that plugs into the top of the oil so annoyed
man, My car failed start after cranks then the oil pressure symbol came up.
I turn the ignition again and starts one click the symbol was gone
My trailblazers oil pressure gauge bounces back and fourth when the engine gets hot.
My Joyner trooper 1100 is doing the same thing. Did you figure anything out on it?
They are a good knock off side by side
My 05 silverado is doing the same thing hoping it's just the sensor. I've started to get a bit of a knock in the engine too.
@@hunterread3507did you fix it ?
Already put a new one and still do it the same thing
Just replaced my alternator, tension pulley, and belt and now my oil pressure gauge is at 0.
my oil light comes on when i stop and car is idling but as soon as I accelerate it goes off. it is even safe to drive it like this
It is but get it fixed asap
Computer also could be a problem
My reads high all the time
I just took my truck up to a mechanic by me because I was having Oil pressure fluctuations. They said they did a Manual Oil pressure test and suggested I replace the whole engine for $9k... How much bullshit does that sound like to you?
Lol
doesn't apply if you have a VQ 😂
So question I changed the sensor and the new one still dose the same thing ?????
How about no code? Doge ram 1500 goes down to 0 pressure but when i idle it goes up but when i drive goes back down to 0. Not over heating or stalling ect...
Can it cause my 2003 dodge Dakota to keep stalling after it runs for a little while
It's possible but unlikely. I suggest checking oil pressure and compare it to spec.
Having the same issue with my 06 ram 1500 4.7 stalls out when coming to stop signs or stop lights randomly changed hell a shit and still happening
@@juanornelas6779 camshaft or crankshaft sensor if it hasn’t been replaced yet
@@Top5AutoRepairsoil pressure Guage can help to check pressure on the oil pump