How to fix a computer board on a hoshizaki Ice Machine with a three beeps mode
ฝัง
- เผยแพร่เมื่อ 21 มี.ค. 2016
- On this video I will show you how to fix a circuit board on a hoshizaki Ice Machine you can get the relays at
www.futureelectronics.com/
4150 Old Airways Blvd
Southaven, MS. 38671
Tel:662-536-0401
part number JW1FSN-DC12V - แนวปฏิบัติและการใช้ชีวิต
Mr. Pena, Thank you. This video helped me out a lot.
Thanks!! Very helpful video. Appreciate for your time and efforts to make things easy for others.
This is really brilliant, thank you
thanks for your interest, the information about the relay is below the video, if you don't see it please let me know and thanks again
I see you been using the dewalt stack drawers before it was cool!
Thanks! Subscribed !
My G board bin control Green and Amber light doesnt turn on even after I installed a brand new bin switch. Is something wrong with the control? I'm afraid that it will never stop after the bin is full.
Gracias, senor Pena.
What is the difference between an e board and g board
You should invest in some solder wick and a solder sucker. Those would make this much easier
Thank you
is the machine on when you trying to reset it? two beeps means you have a problem with a thermistor, is the white plug with orange wires, but even if it is open you should be able to do a reset, if not then you have a bad board, but I will recommend to change the thermistor first, I hope my information will help you, otherwise feel free to contact me
leo peña ,how about when the hoshizaki board beeps 2 times and can't be reset??
Check the thermistor, more likely is going to be open
Hi, I'm not getting any beeps but the relay on the board cuts power to the compressor after 5 minutes of running. Then a few minutes later it starts up again. The compressor continues to do this indefinitely. I've checked everything else. No other safety switches are open. Any ideas. Please help
You probably have a high pressure, first hook up the gauges and check the high pressure, you probably have a faulty condenser fan motor or dirty condenser, let me know if this was the reason
Where can I get the relays?
www.futureelectronics.com/
4150 Old Airways Blvd
Southaven, MS. 38671
Tel:662-536-0401
part number JW1FSN-DC12V
Where can I get those relays from
www.futureelectronics.com/
4150 Old Airways Blvd
Southaven, MS. 38671
Tel:662-536-0401
part number JW1FSN-DC12V
MI MAKINA TIENE EL MISMO BORD Y SE QUEMO EL PIN # 10 Y 9 Y COMPRE OTRO Y LO VOLVIO A QUEMAR' QUE CREES QUE PODRIA SER?
Pudiera ser el relay que controla el compressor o puede haber un corto en la corriente que va al condensador en caso de ser remote
How about a beep every 3 seconds?
Check the thermistor, the one that has orange wires, more likely is open
Great idea, but some customers may just say, no thanks, I’ll stick with the repaired board, then expect you to save them every time like that. If you do a lot of ice machines, I could see that . The other thing you need to accept is liability in the event of a fire. That modification means you own it, not the OEM...