Earlier this week I got a set of PS4S's for my RS! Great tire so far and seem better than the PSS for daily duty being a bit quieter and less harsh. There may be some compromise at the limit but for a daily... Great looking wheels and bang on off set!
They have long shanks that are specifically for use with the spacers I had that I decided not to put on with the Revo wheels. The long shanks may have been a problem. I mean, probably not but I thought I would just keep them together with the spacers
Looks sweet Adam! I installed black on mine, completes the look.. I went with gorilla lug nuts. Went this route because they use one lug nut key and includes Key Registration/Identification Label. Gorilla Lug Nut Kit Small Diameter 21133-V.
look very good ,like the shine rasther than the satin of oem wheels, just noticed have you put the new maps in the sync 3 .looks different from my screen.
Look great Adam! On mine I can just reset the tyre pressures and didn't need to do anything else, did someone recommend you do what you have done as I have never had an issue?
being wider wont they potentially throw stones and chip the paint without mudflaps or even with them especially for a car that has no paint coating or other treatment?
Hi the new wheels look really cool 😎, could you please tell me where you got your black wheel nuts from that you used on the original wheels please thanks
Adam the wheels look amazing mate a very good improvement over the standard ones and with their offset they fill the arches better , adam where did you get your low level jack and the jacking puck from
The new wheels look great Adam, never was a fan of black wheels but got to say these look great on the RS in gloss black. They remind me of the new GT500 carbon wheels only in gloss black. Great video as always although the TPMS sensors seem abit of a faff
I really like the look of the wheels they really sit and look very good i have tpi black wheels nuts on two of my cars and they are very nice come with a locking nut too and they are steel much better than alloy ones 👍🏼
Yes. The dash menu reset is just to tell it you've pumped tyres up but if you have to replace a tpms then you will have to do this which I found out when a tyre fitter broke my tpms and I got a warning saying 'tpms not detected'.
thanks for the tpms tutorial i was having trouble finding out how to do it on the newer mk3 focus
No probs Dan, cheers :)
Absolutely gorgeous. Perfect set up for your car. I have a orange gold STLine and I want to get it pimped up as much as I can with out spoiling it.
Earlier this week I got a set of PS4S's for my RS! Great tire so far and seem better than the PSS for daily duty being a bit quieter and less harsh. There may be some compromise at the limit but for a daily...
Great looking wheels and bang on off set!
8.7k subs is criminal, keep up the great work mate loving the videos!
Thanks for saying so mate, spread the word!
@@AdamRainey 100%! 🤜🤛
Nice Adam ... wheels are a DEFINITE improvement!!
Cheers Nigel :)
Excellent choice of wheel and tyres the Rs is looking sick now 👍 definitely get black wheel nuts...
Cheers, yea looking into the nuts right now!
Why didn't you reuse the previous black wheel nuts that you had?
They have long shanks that are specifically for use with the spacers I had that I decided not to put on with the Revo wheels. The long shanks may have been a problem. I mean, probably not but I thought I would just keep them together with the spacers
@@AdamRainey ohh makes sense, forgot about the spacer. Looks great tho, considering getting a set myself
Good looking upgrade!
I think so too!
Looks great Adam 👌
Thanks Joe 😊
Just as you say, "Looking awesome"!
Cheers mate :)
There is a computer program you can load up that deactivates the tps and gives you the option of keyfob window roll down activation
Love em Adam great choice of wheels I'm jel 😭great job as ever mate 👍
Cheers Lee :)
Looking good Adam 👍...I use tuner brand black wheel nuts, all locking nuts too, they were around £32 posted from demon tweeks
Looks sweet Adam! I installed black on mine, completes the look.. I went with gorilla lug nuts. Went this route because they use one lug nut key and includes Key Registration/Identification Label. Gorilla Lug Nut Kit Small Diameter 21133-V.
Look great good video as usual 😎
Thanks David 😊
Curious, how have the wheels held up with them being the 19’s and thinner tire wall which many people tend to frown on.
Beautiful Wheels!! Yes i also put black lug nuts on my black wheels and it completes the look.
How have the 19’s held up over time with the thinner side wall? Many people tend to hate on 19s.
Awesome wheels Adam great choice,need some lows now to make it have a more aggressive stance
Cheers Michael, springs have been on the to do list for ages now lol
I've had my rs for about a year now and I had no idea about the arrows on the side skirts.
Cheers Juan, yea such a small thing that you would never notice!
look very good ,like the shine rasther than the satin of oem wheels, just noticed have you put the new maps in the sync 3 .looks different from my screen.
Looking good Adam. They suit the car well. I would like to see a pair of rear mudflaps next just to square the back end up. Well done mate 👍👍
What size of wheels and tires are these? They look fantastic!
Car looks great
Cheers :)
Adam do you have a link to where you bought the sensor fob thingy from? There’s loads on eBay but I’m worried some are shit lol
yep
www.amazon.co.uk/gp/product/B07SZKWMVH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@@AdamRainey thanks I’m having trouble with one of my sensors but don’t know what one. So I guess I need four new ones 😭
Looking good 👍👍 which jack are u using mate?
Cheers :) It is the Halfords Advanced 3 tonne low profile jack - it is really, really good!
Very nice looking. Curious on the answer to the wheel nut question, want to change wheelnuts on my car too when my new wheels are ready
Looking well Adam think it needs black wheel nuts but its your car
cheers Carl :)
Looks brilliant👌😎 go for black wheel nuts👍
Cheers Gareth, looking into the nuts now!
Did you use genuine Ford tpms or something different as iv orderd the same alloys
Yes genuine Ford TPMS sensors/valves. Check the previous revo wheels video I did for specifics...
Great video as always 👍. May I ask what the reason for having the 'Do Not Flash' bung in the OBD port is for?
Ford service personnel can sometimes have a habit of flashing software without any regard for custom maps which can wipe them
Look nice bro
Cheers :)
Car looks nice on the new wheels, you selling the spacers? lol looking a set for my forged alloys.
Hi Adam where did u purchase the poly jack pad from?
Hi Steve, it is from Powerflex but I bought it from SiCo Developments
@@AdamRainey
Thanks so much Adam I will get one, I have a 2016 Rs in blue.Awsome car.
I watch your videos it's great viewing.
Thanks
Steve
Look great Adam! On mine I can just reset the tyre pressures and didn't need to do anything else, did someone recommend you do what you have done as I have never had an issue?
being wider wont they potentially throw stones and chip the paint without mudflaps or even with them especially for a car that has no paint coating or other treatment?
I have small flaps on the front and the rears don't matter
Hi the new wheels look really cool 😎, could you please tell me where you got your black wheel nuts from that you used on the original wheels please thanks
Hi Adam. Great lovely looking wheels. Is this the part number for these wheels- RF011W100100. Just to make sure I get the same ones 😊 Thanks.
Those are great looking tires but so expensive. Do they have much better grip & handling vs. some of the top tier other brands?
Wow looks really good and suits the car 🚙💨 🥰
Adam the wheels look amazing mate a very good improvement over the standard ones and with their offset they fill the arches better , adam where did you get your low level jack and the jacking puck from
They look fantastic. Great choice Adam.
Thanks mate 🙂
Omg Adam they look banging I want 2 get spacers on my st I've got 19inch wheels but not sure what size spacers 2 get have u got any pointers 4 me?
Static-x yeah!😄
Damn right!
And I you still use CD’s, yes!😂
The new wheels look great Adam, never was a fan of black wheels but got to say these look great on the RS in gloss black. They remind me of the new GT500 carbon wheels only in gloss black. Great video as always although the TPMS sensors seem abit of a faff
Do you want to sell the original set??? I want to know will they fit a 2012 se model
What width,diameter and offset are these wheels?
19 x 8.5 inch, 5 x 108 stud pattern, ET45 offset, 63.4mm center bore
I really like the look of the wheels they really sit and look very good i have tpi black wheels nuts on two of my cars and they are very nice come with a locking nut too and they are steel much better than alloy ones 👍🏼
They look amazing! How's the Mini? 😬
Cheers Mark, check out today's vid for the latest Mini news!
How much were the tyres man they look awesome!!
Great stuff, I'd 100% go for top quality black nuts,,,
What’s this witchcraft ‘training the tpms sensors?’ Is this different to just setting the sensors through the dash menu?
Yes. The dash menu reset is just to tell it you've pumped tyres up but if you have to replace a tpms then you will have to do this which I found out when a tyre fitter broke my tpms and I got a warning saying 'tpms not detected'.
I got black nuts from the RS mk3 club easy pezy lol 👍
Yea, they look like a solid option
Blue nuts look really nice on black wheels & Blue car, also if you can, lower it haha.
lowering springs are waiting to get done...:)
what r the specs of them
I had to get my back brakes done they cost $800 in Canada anybody care 🤷🏽♂️rs
You looking to sell your old wheels ??
Nah, I think I will keep them for winter
Be careful with your nuts. I bought some black ones off e Bay that said don't rust and they rusted within a week. Bad times.
And good call with no spacers. 👌
👍🏽👍🏽
nice but what have now ET ? in serial wheels is ET45
Which tires are better, sport cup 2 or 4s¿? Which pressure you get in your tires¿? Thanks!