Peck Brothers- Working On LS SWAP Jeep TJ
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Watch as youngest Peck Brother (Cayleb) spends his weekend putting out fires and fixing problems that come with putting an LS engine in a Jeep. He tackles the front accessories brackets and belt system. Alternator hitting fuel lines/ radiator hoses in the way etc. Thanks for watching!!!!
Your guys' videos have inspired me to build my own tj
Looking forward to binging all your vids! (I’m older than your Dad)
Interesting seeing how guys you started out and how far you've come..
They make transfer punches that work pretty good for stuff like your alternator hole 👌 glad to see some TH-cam content, keep it up!
Dang we are going to look those up and get some ordered up 😂😂
You can put grease on the end of the bolt to make your bolt circle.
What zack Kelly said transfer punch for the win cool video!
Thank you 😁 we are stoked you like it!!
Great great words there at the end. So true! I wish I knew more about building stuff. Would have saved a lot of money.
Haha it’s 50/50 weather or not your will save money 😂😂😂😂 thanks so much for watching!!
Amazing work. And congratulations on your marriage.
Thank you so much we appreciate your comment more than you have any idea!!!
9:50 after working my way through dozens of videos of the past couple weeks when Cayleb says "believe it or not, we have more problems" my first thought was don't worry, I believe it! lol that could be a new shirt!
Just started watching your vlogs. Been watching Fabrats for awhile. Your Vlogs popped up. They are pretty cool. I am enjoying them. Thanks
Smart man . Faceshield and gloves .with that death wheel
Right arm brother
You guys have some beautiful rigs. Love the videos
thank you!!
I've gone back to the start :o only couple years late
Videos have been great keep it up👍
Thanks dude 🙏🏼
Since the LS injector rails can be swapped you should at the time reversed them so the front gas connection would be running in the back with no need to make that bracket.
I love the videos. Hey something i found just recently to help with deep hole markings are these "Dixon Industrial REACH- Deep Hole Permanent Marker". You can add them to your amazon order!!!
We need to look into them for sure!!!! 😁😁 thank you!!!
Screaming Eagles 🦅 🇺🇸💪🏼
This shows as your first vid, but it seems like there are earlier ones? Just found your channel recently and am catching up. On the thing with marking the hole with the spray paint, maybe use a thin long red straw attached to the paint can, like comes with WD40.
🔥🔥🔥
Or you could use a drill bit thru the alternator hole to mark where to drill the mounting hole😊
Dad's jeep sounds good 👍
It’s so loud it hurts when he is wide open 😂😂
Is it open headers ???
I like the way it sounds for surec
Man, u guys are great! Keep those vids coming! Rigs are lookin good! Enjoy that cold ass weather! Lol Sending some Florida Heat your way! 🌴☀️👍🏼
Haha will do man thank you!!!
New to the channel so starting from the beginning…. But I have a feeling this is not there first video?
Keep the vids coming
Aye aye captain!!! We will have a new one out on WEDNESDAY‼️
A piece of all thread and 2 hymn joints and an adjuster nut could of saved you some time. They use that set up on hot rod motors for accessories
my 2003 tj brought me here
Jeeps looking sexy! Good luck and keep the videos comin!🤘
Thank you SOOO much!!! We bet man, the videos will keep pouring in 😁😁 please share!!!
An old fashioned pencil.
Deep respect for anyone who runs Swampers lol
Poor baby no heat on his little feet, lol..
🤘🏽
Looking good! I'm guessing that with the exhaust near the neck of the intake that you weren't able to run the fuel rail connector pipe on the rear? What little I saw looked tight.
Can't wait to see this rig running!
That’s exactly why we ran the fuel rail inlet on the front!
I'd like to wheel with you brothers, but i'm in Texas and have a Bronco. Maybe one day my friends.
I’m sure we will be down in Texas at some point!! 😁😁
Hello from your oklahoma uber driver great video
Tobie my man! Thanks for the ride and thanks for watching!
The pick came like that🙃
Sure it did 🧐😆
😆😆
Better idea Q tip with paint
That’s a way good idea 😂😂😂
So out of curiosity, what do y’all think the final cost to build this Jeep?
way too much😂
Could put painters tape on it and use a nail and tap it like a punch.
That’s a dang good idea! Haha wish you woulda been with us 💡😂
13:09 sigh.... Layout fluid, Dykem blue. Paint it on the piece and shove... whatever through the hole punch screwdriver heck the bolt you are gonnna use, and it will scratch off the Dykem exactly where you need to drill.
There you go, that’s a good idea!!
Where did you get the throttle body angle adapter?
So that was something that we custom made from 2 adapter plates that convert the throttle body mounting from 4 bolt (car style) to 3 bolt (truck style) with a pice of 3” aluminum tubing in between cut and beveled for the perfect angle!!
@@PeckBrothers Thanks. It looks great. Looks like I'm making one too. Trying to keep a manual fan. My holley intake angles down and looks like something from Star Wars. Great build.
Doses your LS engine have a tensioner on the alternator to tighten up the belt I really don't know because I have never messed with a ls engine for real guys for real okay thanks Charles Williams later on jelly beans lololol later on bro please just be safe at what ever you are doing in your life okay thanks again Charles Williams later on jelly beans lololol
You Guys Need A Instagram
We have one! Look us up @peckbrothers