Once again a solid video boys!! The Jk has made a transformation from when it came home!! Keep up the good work!! Loving the weekly video setup. Had me worried for a minute last Sunday!!
Thanks so much for this comment 🙏🏼🙏🏼 we are gonna make it up to everyone and get 2 videos out this week 😁😁😁 thanks so much for following along and supporting our channel!!
If you take out one spring in the coil pack on all 4 corners and lock them out with the slider rings you can get a good ballpark on your spring rates. So if you have a single 200lb (example) spring that’s is locked out and you have 8” of shock shaft showing. Once you lower the weight of the jeep down you only have 4” remaining. You loose 4” on a 200lb spring. Poly with be able to figure out your sprung weight of the vehicle and get you the proper spring rates for the amount of shock you want showing at ride height.
We use them on site mixing trucks for doing highways in Illinois. Bridges the ground with that rebar you could’ve use the copper they sell it at home improvement stores.
First time I've ever seen a concrete mixer that mixed on the spot as needed. We just use the rotary tumbler style in Tn. That was pretty 😎. I bet I logged on TH-cam 5 or 6 times since Sunday looking for the next video. Glad to see it made it on here. I'm in the middle of rebuilding my crawler jeep Yj, and have a lot less knowledge on the matter than y'all, but use yalls stuff as an inspiration to trying new stuff.
THANK YOU SO MUCH!! We are so grateful for the loyalty 🙏🏼🙏🏼 we are gonna make it up to everyone with 2 videos this week 😁😁😁 and they are both gonna be pretty dang good 😁😁 thanks so much for the positive comments and the support to our channel!!! 🙏🏼🙏🏼
😂😂😂😂 10-4 brotha 🫡 it’s just tough to know how long they will end up!! Our next one is like 16ish minutes hopefully that quenches yuh 😂😂🙏🏼🙏🏼 thanks so much for the support!!
Looking good. But if you don’t mind a suggestion, you might wanna rotate the rear upper shock mounts 90 degrees. This will let the reservoir hose come off the front or back and won’t be sticking into the rear seat area. Would be a quick and easy fix. Also make it easy to mount the reservoir to the shock hoop.
Love your guys videos! Your doing cool stuff with that JK. After seeing Cayleb’s Jeep though your killing me with all that clutter in the engine bay. Clean it up! Haha
Really Nice work boys! Those rear hoops are awesome! Looks like you might have some sheet metal work to do in the near future. Or Plexi Glass so the rear passengers can stare down at the tires ;)
You should’ve welded a plate to the frame and then welded your pipe to the plate. Nice welding though. I hope you covered up the chrome on the shocks before welding
I wish my 2013 2dr JK Rubicon was set up like like yours like the grey or the red one love the suspension set up im trying to find the best bang for the bucks 3" lift kit to go with any thoughts
I’m in the process of 1 ton swapping my jk and I’m looking to go ahead and swap over to coilovers. I’m looking to do pretty much the exact same setup. What size coilovers did you go with?? Thank you.
Set them hard. And drive it and tune the softer till your happy with how it handles in the corners. Thats high speed tuning. And low speed ya wanna some resistance. So ya not topping rhe shock out and with put smashing the bumps to hell.
@@PeckBrothers what rates you running? I'd guess for that rig a good starting point with 5" shaft showing youd want 200/225-250 fronts and 175/225 or so rear. Hard to say what all will be added still but that would prolly put you in the ballpark
Hey guys I'm going to DM on IG My Nephew's page who's also a owner of fabrication shop in AZ. Pro Drifter building race cars top to bottom. Maybe he can hook you up with some of his sponsors! Definitely would be able to help out with small ideas for small issues. Not going to put up another creators channel on your channel. 😊 Even watching commercials for you! Stay blessed! Your Wendy's gal! 😎❤️🤙
Once again a solid video boys!! The Jk has made a transformation from when it came home!! Keep up the good work!! Loving the weekly video setup. Had me worried for a minute last Sunday!!
Thanks so much for this comment 🙏🏼🙏🏼 we are gonna make it up to everyone and get 2 videos out this week 😁😁😁 thanks so much for following along and supporting our channel!!
Happy for yall and the shop the jeep looks nice brother love the seats
Thank you!
Man when y'all build a Jeep, y'all really build it!! Great video guys!!
Thank you 😁😁😁🙏🏼🙏🏼 we so appreciate your support 😁
If you take out one spring in the coil pack on all 4 corners and lock them out with the slider rings you can get a good ballpark on your spring rates. So if you have a single 200lb (example) spring that’s is locked out and you have 8” of shock shaft showing. Once you lower the weight of the jeep down you only have 4” remaining. You loose 4” on a 200lb spring. Poly with be able to figure out your sprung weight of the vehicle and get you the proper spring rates for the amount of shock you want showing at ride height.
Dang thank you for explaining that!!
We use them on site mixing trucks for doing highways in Illinois. Bridges the ground with that rebar you could’ve use the copper they sell it at home improvement stores.
First time I've ever seen a concrete mixer that mixed on the spot as needed. We just use the rotary tumbler style in Tn. That was pretty 😎.
I bet I logged on TH-cam 5 or 6 times since Sunday looking for the next video. Glad to see it made it on here.
I'm in the middle of rebuilding my crawler jeep Yj, and have a lot less knowledge on the matter than y'all, but use yalls stuff as an inspiration to trying new stuff.
THANK YOU SO MUCH!! We are so grateful for the loyalty 🙏🏼🙏🏼 we are gonna make it up to everyone with 2 videos this week 😁😁😁 and they are both gonna be pretty dang good 😁😁 thanks so much for the positive comments and the support to our channel!!! 🙏🏼🙏🏼
They look sick!!! Strong work. Can’t wait for headquarters to be built!!
We're just as excited! Thanks for watching!
I enjoy watching your videos since I never know what you 3 are going to be doing in your videos
Haha yeah you will get a little bit of everything in our videos lol usually we have no idea what we are doing and aren’t qualified to do it 😂😂
@@PeckBrothers yet you do it anyway
Loving the content!!! You guys are my favorite off-road TH-cam channel. Keep it up fellas!
We are seriously honored!! Thank you 😁😁😁😁😁
Trailer wheel wells would work great to replace an cover that area up an look good to an pretty easy to set up since there so simple!
Thanks for the idea!!! 😁😁 We appreciate you watching our channel! 🙏🏼
Dang that was some good pouring thanks for the shout out
🔥🔥🔥Nice build
Just found your channel. Great Video! Alex you are the spitting image to a young Chris Cornell.
I had to look up who he was but you're spot on😂
Caleb can weld!
I was waiting for video on Sunday morning. Nice build 👌
More to come!
good stuff !!!!
Thank you so much for supporting our channel 🙏🏼🙏🏼
I. Need. Longer. Videos.
I love the content. You all crack me up! Please make longer videos.
😂😂😂😂 10-4 brotha 🫡 it’s just tough to know how long they will end up!! Our next one is like 16ish minutes hopefully that quenches yuh 😂😂🙏🏼🙏🏼 thanks so much for the support!!
@@PeckBrothers I’d watch a full 1/2 to 1 hr video of u all easy!! Leave in the “boring” stuff. It’s not boring to a lot of folks.
Cant Wait to see what comes out of the shop!
buncha jalopies for sure😂
Looking good. But if you don’t mind a suggestion, you might wanna rotate the rear upper shock mounts 90 degrees. This will let the reservoir hose come off the front or back and won’t be sticking into the rear seat area. Would be a quick and easy fix. Also make it easy to mount the reservoir to the shock hoop.
We were planning on that! Just didn't have time yet. We still need to add bump stops to the shock shaft and then fill them all with oil. Good catch!
I had a feeling you’d already be on it. As always, keep up with awesome work and videos!
Passenger can adjust rear shock rebound in real time , awesome 😂
Love the videos guys. Keep them coming. Always looking for yalls videos when i pull up TH-cam. Shock towers came out awesome👌🏼
We sure love how they turned out! Glad you're enjoying it!
Dang I have been waiting for your video. You guys are funny and knowledgeable.
It has been wild around here lately, we are gonna make it up to everyone this week with 2 videos this week 😁😁😁
Love your guys videos! Your doing cool stuff with that JK. After seeing Cayleb’s Jeep though your killing me with all that clutter in the engine bay. Clean it up! Haha
😂😂😂😂 lol for real!! He needs to get a grip under there 😁😂😂
You guys buil awesome jeeps 👍
we sure try😂
Looks like suceed pretty well at it
You should buy phosphoric acid with zinc if you buy the por 15 metal prep works great
Little trailer fenders. Quick and easy way to cover the hoops
Good thinking, we’ll look into that thank you!! 🙏🏼
It’s coming along SAWEET!! 🤙🏼🍻🤙🏼
Thank you man!! 😁😁
Use metal motorcycle fenders and sheet the sides for those rear shock hoops just find some wide enough.
Might have to look into that!! Thanks for the input!
Welding gooood..
I don’t know weather or not this is sarcastic 😂😂😂
Awesome content!!
Appreciate it!
Really Nice work boys! Those rear hoops are awesome! Looks like you might have some sheet metal work to do in the near future. Or Plexi Glass so the rear passengers can stare down at the tires ;)
We might need you're help on the plexiglass install😂
You should’ve welded a plate to the frame and then welded your pipe to the plate. Nice welding though. I hope you covered up the chrome on the shocks before welding
Cover the shock hoops with sheet metal and weld them to the tub, and for style points add a couple bead rolls.
That would looks freaking amazing!! Thanks for the idea 😁😁
Nice Job Caleb!
You guys look baked AF. Lol
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
I wish my 2013 2dr JK Rubicon was set up like like yours like the grey or the red one love the suspension set up im trying to find the best bang for the bucks 3" lift kit to go with any thoughts
Can y’all give an overview of your axles notice y’all don’t have a front truss and I like it.
You bet man!! We are gonna do one soon of all the Jeeps 😁😁
I’m in the process of 1 ton swapping my jk and I’m looking to go ahead and swap over to coilovers. I’m looking to do pretty much the exact same setup. What size coilovers did you go with?? Thank you.
Are those 14 or 16 inch coil overs
Looks like everything clears minus the rear tire is shoved into the fender so hard the tire is deformed 😂 lol love it!
Spray foam and flex seal tape it’ll do away with that hole .
When you boys fabbed up the hoops how did you find the angle to mount the coil overs
So we copied Cayleb’s at about 18 degrees in!! 😁😁😁
Was that the shocks clicking at the end? Or was that the skid loader boom slowly lowering lol! Looks really good tho! Huge inspiration here!
It was probably the skid 😂😂😂 thank you so much for this comment 🙏🏼🙏🏼
Move the battery behind the driver seat.
already mounted😎
Gucci🙌🙌🤟🏻
😁😁😁
Why do you guys like shock hoops so much?
There’s no intention for attitude in that comment I’m genuinely curious 😂
I honestly have no idea, it’s legit just something we have loved since we were little 😂😂
@@PeckBrothers they look so tight! I just didn’t know if there was a mechanical advantage 🤣
Make Brady work some over time so that shop will get done faster 😆
We're gonna print this comment out and hang it up on his mirror😂
@@PeckBrothers 😂😂 please do that
Do you guys make your own beats to you videos
No sir!! We aren’t even close to talented enough for that!! We have a subscription to epidemic sound 😁
@@PeckBrothers well I have a program where we can make your own beats
Set them hard. And drive it and tune the softer till your happy with how it handles in the corners. Thats high speed tuning. And low speed ya wanna some resistance. So ya not topping rhe shock out and with put smashing the bumps to hell.
It's been tough trying to find the right springs. Hopefully I have the right ones coming!
@@PeckBrothers what rates you running? I'd guess for that rig a good starting point with 5" shaft showing youd want 200/225-250 fronts and 175/225 or so rear. Hard to say what all will be added still but that would prolly put you in the ballpark
What flares do you guys have on this?
They are moto built fronts that they put in the rear.
Exactly right, they are motobilt rear flares on the front and rear!!
Get bump stocks on the back
America 🇺🇸💪🏼🤙🏼🔧🔩
Hey guys I'm going to DM on IG My Nephew's page who's also a owner of fabrication shop in AZ. Pro Drifter building race cars top to bottom. Maybe he can hook you up with some of his sponsors! Definitely would be able to help out with small ideas for small issues. Not going to put up another creators channel on your channel. 😊 Even watching commercials for you! Stay blessed! Your Wendy's gal! 😎❤️🤙
Thank you so much for watching and supporting our channel!! 😁😁😁