What an awesome bash Brother Aldo 👊. The Castle 2200 friggin rips!!! Bro you had me laughing when you were hammering her 2wd 😂. Still clearing the gap 😱🚀🚀. She was grinding pretty bad at the end. Totally enjoyed this my friend. Even had the wife watching on the big screen 🍻😎💪👊👊
Thank you so much Rich and glad y’all enjoyed it. It was definitely an interesting session. What a tough little Truck when I ran this truck before on 6S it had the slipper now with the center diff I think was just way too much load on those plastic CVDS definitely going to rebuild the truck tone it down a little bit and try it again, but I was very impressed that it cleared the gap in 2 Wheel Dr. that was the best part of the run. Thanks again my friend. Enjoy the rest of your week and tell the wife I said hello 🚀🤩✌️👊
Definitely a great session just need to go in and tune it up a little better for that kind of power that M2c V2 brace is definitely holding strong multiple nose bombs and not even a slight bow. Have a great weekend.
Yes, it would, but you would still need to limit the travel. They’re too long and the shocks that I used are smaller, not so bulky and they also have the emoshion style shock caps, which is a plus.
Yeah, It did only because I lost front wheel drive and I kept running it and then the center shaft popped off and just ate a hole into the front of the motor mount who would ever thought a piece of plastic would eat a hole in aluminum
U and ur power systems r mental lol that body looks beaut in that colour, u know me I love my kratons but I wouldn't get the 4s I don't like slipper clutches for the same reason u had in this video 😂😂😂
Thanks man this truck does not have the slipper. It’s got the center diff. That’s what they’re putting in the V2.5 now I think that’s why I kept breaking the CVDs. The slipper would allow a certain amount of slippage. This is almost fully locked up with no slippage. I’ll get it working properly it’s just gonna take a few Sessions of destruction first lol
@@AldoLoyal what are some good upgrades brother? I've got the stock esc and motor. Put a 15 tooth pinion on it. Running hoovo 120c battery. I can't keep the front down unless I turn the punch down to 3 or lower. I have the v2 esc that only goes up to 5 on the punch. I think the v2.5 punch can go up to 9
Thanks bro yeah, that truck is really good with that power system. I just wasn’t thinking when I geared it I geared it for 4s but ran it on 6s which I should’ve never done. I need to go down about three teeth at least and see what she does that Center diff tighten the hell out of everything there’s no more slip. I think that’s why I got away with it in the past because I was running the slipper
Holy 💩! You launched that pup ! I’m sorry that happened . It’s happened to me on 2 ft jump lawn dart . Adios arrma servo . Slight bow to the front center shaft but an easy fix . I m new to this and glad I got into working on them as well . It’s getting better anyways 👍🦅
Yeah man, it happens especially when you treat a RC like I do, but I enjoy wrenching on them the most so I have no problem fixing them. It’s relaxing just to go out in the garage and build an RC after a long day at work.
Yeah dude, that happens sometimes when you start upgrading these RC’s i just keep upgrading shit until it stops breaking but now I know pretty much exactly which parts I need to get and which ones don’t work so it makes it a little bit easier. I’ve built quite a few of these RC cars.
@@AldoLoyal yeah, you’ve upgraded so many platforms that now you set them up the best way possible for your driving style (hardcore) before you run them… I have been hookin’ some of mine up following your lead… you could run my 6s Kraton over with a tank and it wouldn’t break😳… I did what you did, minus electronics, to your 8s to the “T” deferent brands on some shit but it’s a beast! My buddy makes 7mm shock shafts and will install them with a custom piston and an aluminum cap with the bleeder screw… shocks are just bad ass
Mine's been running great on 4S, those plastic CVDs can't handle 6S power, I have no idea how you managed to keep it in one piece for so long! Great sends though, I'm not sending mine as hard as you are but it still takes some bad hits and keeps on going!
I ran this truck for at least a year with the slipper and never had a problem with those CVDs never broke one on 6s I think that Center diff was too much for that and I was over geared by three teeth. I’ll get it straightened out and running on 6s
@@AldoLoyal No doubt, is that what was smoking at the end there? Never heard of a diff overheating... or I guess it was that driveshaft that popped off and ground itself against the motor mount plate
What in tarnation kind of voodoo Alaskan bush hippie alien spaceship technology you gotta going on here son? You think you're tough? I'll see you at Armageddon! We gonna dance! boy 😂
Maniac setup Aldo. The car is nuts but you may be right, just askin a little too much. Freakin insane wheel speed. How do you like the center diff compared to slipper?
Thanks dude. I just made a bad call on gearing. I think I just should’ve went with like a 14 T to start with. I geared it up like I would’ve on 4S and ran it on 6S and it was way too much the good thing about a slipper is I wasn’t breaking the CVDs, it would allow enough slip for that not to happen with the center diff it’s like being completely locked up and it’s not good running that kind of power. i bought some new stuff to try and I’ll give it another shot.
4.37am and wake up to this ❤, Aldo yoi made ma friday morning PERFECT. That K4s onn6s looks like a violent mf 😮😂😂😂..Bit toasty saamoky😊. Some serious hangetime there❤. Weather seems good as few🎉, no bashing here..💩weather here.
Thank you, my dear friend. I’m glad I made your Friday morning Perfect. Yes this truck is super violent with this power system. I will get it sorted and working flawlessly. At least that’s the plan. Hope your weather gets better soon my friend and you’re able to get out for a session or two.
I wonder what I’m going to break next personally . One time , early in , I was getting ready to drive and didn’t know to set down the controller and the car took off into my truck bed before I realized what happened 😂
Conversation to kraton on way from jenny rc for my outcast 4s v2.5 and m2c chassis brace my 1st bashing build want to do 6s as well looking at hobbywing Max 8 combo currently running max10 g2 2400kv combo
That sounds awesome, dude 6s is pretty rough on these cars but if you drive it somewhat easy it’ll hold together. They just don’t like full throttle pulls on 6s they like to twist axles since they’re all plastic
Anyone who posts Kraton gets a sub from me , lol . I m a little over a week into the 6s one and liking it . 6s is a handful compared to 4s . I have to look further ahead to make sure it’s safe becasue she’s moving ! Look at yours fly 👍. Dukes of hazard baby ! Oh yeah I see a larger Kraton over watching 👍
Thanks man the K-6 is hands-down one of my favorite bashes super tough and handles Awesome and flys super flat. If you like the Kraton check out my K-12 videos that joker is a monster thanks again, man. Have a great weekend 🚀💪✌️👊
Hi Dude, I want to ask you... Is this Kraton 4s resistant to falling? Because I am planning to get my salary at the end of July and I don't know whether to buy Sketer 4s or Kraton 4s... So I want to ask you, after all, you are much more professional than me...
They’re both good cars and depending on what you’re gonna do to it if you’re gonna leave it stock for the most part, the arrma is a really good choice. The Skeeter I didn’t have fun with that truck until I made it 6s and it was a blast to run, but was having heat issues no matter what system I put in it just could not keep the temperature down, but I am in a hotter environment than most. That’s a hard one dude I can’t really make that call for you. I like them both but if you’re in the US, I would say Arrma Kraton 4s
@@AldoLoyal 😇OK, thank you very much for sharing... I have only been playing with cars for about five months, and I don’t know everything about cars yet... I only know how to control the car to do a backflip... 😇 Thank you very much for sharing your experience and welcome you to visit Langkawi, Malaysia... 😇 Thank you...
There’s a few reasons I’m sure but the right one I don’t know to be honest. those Lipos are hard to come by. Never seen a 7S but I’m sure they’re out there. Also, it’s not easy to set up a esc to work properly Not too many people would know where to even start. Yes, you can plug them in and just go run the car, but your LVC won’t be set up properly and could drain your lipo down to nothing.
*_7:35_**_ 😅 Roger Dodger, THAT'D be a violent faceplant!_*
Yes, sir, that truck took a beating no doubt
Awesome sends
Thanks dude appreciate it. This is a little monster of a truck.
What an awesome bash Brother Aldo 👊. The Castle 2200 friggin rips!!! Bro you had me laughing when you were hammering her 2wd 😂. Still clearing the gap 😱🚀🚀. She was grinding pretty bad at the end. Totally enjoyed this my friend. Even had the wife watching on the big screen 🍻😎💪👊👊
Thank you so much Rich and glad y’all enjoyed it. It was definitely an interesting session. What a tough little Truck when I ran this truck before on 6S it had the slipper now with the center diff I think was just way too much load on those plastic CVDS definitely going to rebuild the truck tone it down a little bit and try it again, but I was very impressed that it cleared the gap in 2 Wheel Dr. that was the best part of the run. Thanks again my friend. Enjoy the rest of your week and tell the wife I said hello 🚀🤩✌️👊
Great Bash!! even with a couple of probs!!! v2 chassis brace still holdin up!! thanks for punishing the parts!!!!
Definitely a great session just need to go in and tune it up a little better for that kind of power that M2c V2 brace is definitely holding strong multiple nose bombs and not even a slight bow. Have a great weekend.
_Woah waaait, whaaaat... what did you use for shocks? Wouldnt a shock set from the 6S EXB be a proper upgrade for this one?_
Yes, it would, but you would still need to limit the travel. They’re too long and the shocks that I used are smaller, not so bulky and they also have the emoshion style shock caps, which is a plus.
that thing was cooking lol literally
Yeah, It did only because I lost front wheel drive and I kept running it and then the center shaft popped off and just ate a hole into the front of the motor mount who would ever thought a piece of plastic would eat a hole in aluminum
@@AldoLoyal shit not me lol must have been some rpm
U and ur power systems r mental lol that body looks beaut in that colour, u know me I love my kratons but I wouldn't get the 4s I don't like slipper clutches for the same reason u had in this video 😂😂😂
Thanks man this truck does not have the slipper. It’s got the center diff. That’s what they’re putting in the V2.5 now I think that’s why I kept breaking the CVDs. The slipper would allow a certain amount of slippage. This is almost fully locked up with no slippage. I’ll get it working properly it’s just gonna take a few Sessions of destruction first lol
@AldoLoyal oh ok I thought it had the slipper lol
@@AldoLoyal I converted mine to the 2.5 also. I kept breaking cvc shafts with the slipper
@@AldoLoyal what are some good upgrades brother? I've got the stock esc and motor. Put a 15 tooth pinion on it. Running hoovo 120c battery. I can't keep the front down unless I turn the punch down to 3 or lower. I have the v2 esc that only goes up to 5 on the punch. I think the v2.5 punch can go up to 9
Them shocks looking plush.... That first send was Nutso.... Just went downhill after that 😳😞 shafts, Tires, etc😳
Great video my friend
Thanks bro yeah, that truck is really good with that power system. I just wasn’t thinking when I geared it I geared it for 4s but ran it on 6s which I should’ve never done. I need to go down about three teeth at least and see what she does that Center diff tighten the hell out of everything there’s no more slip. I think that’s why I got away with it in the past because I was running the slipper
Holy 💩! You launched that pup ! I’m sorry that happened . It’s happened to me on 2 ft jump lawn dart . Adios arrma servo . Slight bow to the front center shaft but an easy fix . I m new to this and glad I got into working on them as well . It’s getting better anyways 👍🦅
Yeah man, it happens especially when you treat a RC like I do, but I enjoy wrenching on them the most so I have no problem fixing them. It’s relaxing just to go out in the garage and build an RC after a long day at work.
I’ve had a few RC’s that were tanks stock, but as soon as I upgraded them EVERYTHING would break constantly!!
Yeah dude, that happens sometimes when you start upgrading these RC’s i just keep upgrading shit until it stops breaking but now I know pretty much exactly which parts I need to get and which ones don’t work so it makes it a little bit easier. I’ve built quite a few of these RC cars.
@@AldoLoyal yeah, you’ve upgraded so many platforms that now you set them up the best way possible for your driving style (hardcore) before you run them… I have been hookin’ some of mine up following your lead… you could run my 6s Kraton over with a tank and it wouldn’t break😳… I did what you did, minus electronics, to your 8s to the “T” deferent brands on some shit but it’s a beast! My buddy makes 7mm shock shafts and will install them with a custom piston and an aluminum cap with the bleeder screw… shocks are just bad ass
Mine's been running great on 4S, those plastic CVDs can't handle 6S power, I have no idea how you managed to keep it in one piece for so long! Great sends though, I'm not sending mine as hard as you are but it still takes some bad hits and keeps on going!
I ran this truck for at least a year with the slipper and never had a problem with those CVDs never broke one on 6s I think that Center diff was too much for that and I was over geared by three teeth. I’ll get it straightened out and running on 6s
@@AldoLoyal No doubt, is that what was smoking at the end there? Never heard of a diff overheating... or I guess it was that driveshaft that popped off and ground itself against the motor mount plate
@@GeddyRC I need to open it up and look, but my guess was running it 2Wheel drive burned it up.
What in tarnation kind of voodoo Alaskan bush hippie alien spaceship technology you gotta going on here son? You think you're tough? I'll see you at Armageddon! We gonna dance! boy 😂
Sounds good to me 👍
See you there, Should be awesome.
@@beerforyourhorses3812 yeah man I’m hoping so
Maniac setup Aldo. The car is nuts but you may be right, just askin a little too much. Freakin insane wheel speed. How do you like the center diff compared to slipper?
Thanks dude. I just made a bad call on gearing. I think I just should’ve went with like a 14 T to start with. I geared it up like I would’ve on 4S and ran it on 6S and it was way too much the good thing about a slipper is I wasn’t breaking the CVDs, it would allow enough slip for that not to happen with the center diff it’s like being completely locked up and it’s not good running that kind of power. i bought some new stuff to try and I’ll give it another shot.
4.37am and wake up to this ❤, Aldo yoi made ma friday morning PERFECT. That K4s onn6s looks like a violent mf 😮😂😂😂..Bit toasty saamoky😊. Some serious hangetime there❤. Weather seems good as few🎉, no bashing here..💩weather here.
Thank you, my dear friend. I’m glad I made your Friday morning Perfect. Yes this truck is super violent with this power system. I will get it sorted and working flawlessly. At least that’s the plan. Hope your weather gets better soon my friend and you’re able to get out for a session or two.
I wonder what I’m going to break next personally . One time , early in , I was getting ready to drive and didn’t know to set down the controller and the car took off into my truck bed before I realized what happened 😂
Whoops I hope the truck is OK👍
Conversation to kraton on way from jenny rc for my outcast 4s v2.5 and m2c chassis brace my 1st bashing build want to do 6s as well looking at hobbywing Max 8 combo currently running max10 g2 2400kv combo
That sounds awesome, dude 6s is pretty rough on these cars but if you drive it somewhat easy it’ll hold together. They just don’t like full throttle pulls on 6s they like to twist axles since they’re all plastic
Anyone who posts Kraton gets a sub from me , lol . I m a little over a week into the 6s one and liking it . 6s is a handful compared to 4s . I have to look further ahead to make sure it’s safe becasue she’s moving ! Look at yours fly 👍. Dukes of hazard baby ! Oh yeah I see a larger Kraton over watching 👍
Thanks man the K-6 is hands-down one of my favorite bashes super tough and handles Awesome and flys super flat. If you like the Kraton check out my K-12 videos that joker is a monster thanks again, man. Have a great weekend 🚀💪✌️👊
Hi Dude, I want to ask you... Is this Kraton 4s resistant to falling? Because I am planning to get my salary at the end of July and I don't know whether to buy Sketer 4s or Kraton 4s... So I want to ask you, after all, you are much more professional than me...
They’re both good cars and depending on what you’re gonna do to it if you’re gonna leave it stock for the most part, the arrma is a really good choice. The Skeeter I didn’t have fun with that truck until I made it 6s and it was a blast to run, but was having heat issues no matter what system I put in it just could not keep the temperature down, but I am in a hotter environment than most. That’s a hard one dude I can’t really make that call for you. I like them both but if you’re in the US, I would say Arrma Kraton 4s
@@AldoLoyal 😇OK, thank you very much for sharing... I have only been playing with cars for about five months, and I don’t know everything about cars yet... I only know how to control the car to do a backflip... 😇 Thank you very much for sharing your experience and welcome you to visit Langkawi, Malaysia... 😇 Thank you...
ask myself why 5s or 7s is not a thing...
There’s a few reasons I’m sure but the right one I don’t know to be honest. those Lipos are hard to come by. Never seen a 7S but I’m sure they’re out there. Also, it’s not easy to set up a esc to work properly Not too many people would know where to even start. Yes, you can plug them in and just go run the car, but your LVC won’t be set up properly and could drain your lipo down to nothing.
#poop
Your to far away from the car.