How To Make Your MAZDA 3 FASTER! (POWER GAINS)
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- One of the BIGGEST question's i'm asked... how to make your Mazda 3 faster. Here is everything you need to know on how to make your Mazda 3 faster, with each stage group step by step.
Check Out Arseny's Channel!: bit.ly/ArsenyRa...
MAZDA 3 POWER MODS STAGE LIST: bit.ly/mazda3pml
Throttle Body Ground: bit.ly/34Y4kG5
Short Throw Shifter: bit.ly/32C8sKi
Short Ram Intake: bit.ly/2X2CO7u
Exhaust: bit.ly/33KzZKY
Thank You For Watching!
► Subscribe: goo.gl/pKiz53
► Merchandise & Stickers HERE:
- Canada: bit.ly/2GBRjar
- US: ebay.to/2PuHIX7
► Follow Me!
- Instagram: goo.gl/SfsiGA
- Twitter: goo.gl/qGEQFe
- Facebook: goo.gl/qHnGGz
- Twitch: goo.gl/fDCA9A
Hope You Enjoyed!
One word : Lifesaver
Just drive in standard, keep your oil brakes, suspension and air intake maintained and remount your TCM(Transmission Control Module) so it doesn't overheat later on. Trust me, I know!
Any tips on where to remount it
@@tylerbodzioney8963 my mechanic just ziptied it against back the wall with the three small metal pipes. I wish youtube would let you post pictures in the comments. But it's basically mounted against the wall right behind the battery
@@Kaio_Kid I’m thinking of getting spacer bolts and just putting like a 4in gap between the tranny and the Tcm but still in the same location
@@tylerbodzioney8963 that should work because you're giving it room to breathe. I had mine replaced and remounted round this time last year and still riding smooth. If that AT light is ever on, that's what the problem is.
@@Kaio_Kid yeah I had to replace it last year as well, super simple, but super expensive and shitty design
Crazy how different these vids are compared to your old ones keep it up bro not alot of people are doing vids on these cars :/
I will always own a Mazda 🙃
@@ColtonRichter the link for the mod list doesn't work anymore
Just replaced both O2 sensors yesterday. I have to say it made an enormous difference on acceleration as well as slightly lower idle and much smoother overall engine run. Ive had my Mazda for 8 months now, and its just now topping the 70k range and from what I can tell, the major 60k maint hadn’t been done. It ran ok, but poor acceleration to say the least. About 2 months in to ownership my CEL came on, drive awhile and off it went. I ordered some replacements online and got the $15 O2 socket and....... night and day!!! I definitely recommend replacing them if your car laughs at you while trying to pull out in traffic!
You should replace your spark plugs and coil packs as well, was having same issue and it made a world of a difference making power and accelerating as well
No one does recommended service, welcome to smart people! haha
Imo these cars benefit way more in chassis and suspension upgrades rather than engine mods. I think removing the intake resonator is a good idea. But honestly it’s better to spend your money on upgrades such as better rear sway bars, coil overs, tyres, better bushings, sway bar links and brakes. It will give a really fun car around turns. If you want more power then your better off buying a speed 3 or another car tailored for performance
Great advice!!!! New sway bars are a great idea. The rear engine mount made a huge difference for my manual hatchback. I never had much extra money so i never did the suspension. Its a non speed 3 so i know it will never go that fast. I wish i could pop in a OBD and get 50hp or even 20hp. I think there might be something wrong electronically. I had a couple days where it magically drove much quicker, until i turned it off. Happened a few times and never again :(. First gear is so embarrassing lol.
just bought 2012 mazda 3 this helps a ton my guy
Anything u have done that gave u a noticable power/acceleration difference
Im in the process of building a 2010 mazda 3 2.5 and it is going to go full track car but for the time being just cs intake, borla exhaust, aluminum intake manifold. Probs going to remap my ecu and get bc coilovers soon... Idk if I'll upload it but I might thanks for the resources though I might invest in a catch pan soon
Please upload
Man, what a difference 3 years makes! Now there's both a CS turbo, and a VT Racing Skyactiv supercharger. Those improvements have spawned a renewed interest in other mods, and I swear I'm seeing a wider variety of bolt-ons recently, though that could just be my impression.
I'm actually going after the supercharger myself, because the broad power band and no lag is so good for daily driving. Can't wait!
did you put this on your mazda ? if so how much did it cost
@@lukeburton6446 I did! Total cost was in the neighborhood of $4000, not cheap but a simple way to add like 35% more power or more.
Nothing is going to make more power without a tune. Your engine runs within parameters. These paraneters are set for a middle ground between fuel economy and horse power. This goes for most vehicles which means you can tune your vehicle for more horse power so if you plan on doing a bunch of bolt ons and want to see gains, get it tuned.
This ^ 🔥
Okay for all the people with 2.0 (me included!) or any mazda3 … IF YOU PUT BOLT ON’s ON UR CAR YOU WILL FEEL A DIFFERENCE BUT UR ECU WILL STILL READ IT AS STOCK SO YOU WONT GET ALL THE PERFORMANCE OUT OF IT! Yes you still can get it but just be aware if you want all the gains bolt on’s are for getting your car tuned so ur ecu uses everything together!
cheers just got a maxx sport and trynna find stuff to do it that wont be a waste of time.
You can turbo it and upgrade injectors exhaust intake on a 2.5L and you'll beat speed3's
How much will this cost ? Estimate ?
I been looking for a turbo kit for me 2011 2.5 but I can't find one. Do you know of any?
@@JoseMorales-er7xh they don't make any, you'd have to put the kit together yourself. You could use parts of a used Mazdaspeed 3s turbo system if you wanted to do it for cheap.
I have a non speed 3, so damn slow. I did the rear engine mount and that made a HUGE difference. Even made it growl a bit more. Corksport intake is good. Like you said, the car isn't made to go fast. Having a manual helps a lot. If i run it rough at higher rpms it can feel fast but its not. I like the old school tallights on my hatchback. Its a 2008 so its old now. Hoping to get an A4 to mod up!!!!!
"feels fast but not" perfect for my first car, I wanna feel good but I'm not racing or being fast till I'm experienced, and by then I'll be set to buy a faster car, for now I'll make it perform as best as IT can go, and I'ma make it look nice, not rice nice, but pretty. I don't care bout true speed yet, because I don't want to end up wrapped around a tree or a track wall. Good little car to go around town and not worry about speeding, while scratching that young guy "speed speed speed" itch and feeling fun.
was going to buy a mps3 '06. thanks for this
Get one but 2nd gen. You'll have some of the MZR problems out of the way and you have a way more bulletproof motor to play wth. Had a Protégé Speed, Then a Speed 6 and a Speed 3. you won't regret your cho1ce...sorry my keyboards messed up. no abcdefgh jklmopqrstuvwxyz one not there so theres that... lol
the happy face on the gen 2 was meh but was thinking about that aswell. i've seen on the mazdaspeed forums that the first gen was a little bit expensive on maintenance than the gen 2
I love driving my 3s 6-speed hatch. Its got the 2.5 and I just keep it stock and at 215k I can still burn out the front wheels. Its not a race car, but it's got the zip around town and is just as lively as when I got it 8 years ago.
Love the 2.5!
This is the perfect video for new Mz3/MS3 owners! 🤘🏼
Sure thang!
Well... march of this year I bought a 2008 Mazda 3, since then I painted the wheels, blacked the emblems out, pulled the trigger on a cork sport intake, footwell LEDs, resonator delete, short-throw shifter, aftermarket shift knob that was like $200, a sound system for the doors, and learned how to do a brake job and headlight replacement on the car too. Well... last Friday a 2010 Honda crv rolled through a stop sign leaving me no time to react, which totaled my Mazda... I've been looking for a Mazdaspeed or a different car or even a truck. Just wanted to say, Colton, you really inspired me to buy my first car, my Mazda 3
Sorry to hear that dude. Good luck 💪
Man, I know how that feels I really do.
Good luck searching for your next vehicle, make it one to last! Thanks for the on going support ❤
But after all the mods did you have good gains in hp? I'm really curious as I have a 05 mazda 3 and am trying to gain more hp
Honda owners are the worst
@@khufu8642 he didn't do anything to get power
I have a 2005 Mazda 3, and found the best way to add horse power was by welding a hitch to the front of my vehicle, and getting it pulled by two mustangs. You can also save some money and go with a pair of donkeys. Get that license plate customized: "assman" 😂
😂😂😂
has anyone had this problem before?
i used to use that exact short throw shifter but i had an issue where if i shifted too hard the ball would pop out of the shifter and i would have to pull over and fix it it was dangerous and i just took it back to stock but left the bushings and it felt way better
I took off on a Subaru WRX Wagon 😂 I have a 2.3 Mazda 3 2006 stock
dude, with the vids alone you earned my like/sub and then you go and put out these great google docs........you a legend fr. I'm excited to get started on my 2.5 '10 3S after getting all this info. thanks man keep it up!
Glad we could help!
What have you done to your 2010 Mazdaspeed 3 2.5l so far?
My 2006 mazda 03 stock!
True sleeper
Loving my 08 2.0 5spd
Do a 2.3L swap!
@@applepoop10worth it ???
@@makehernaughty-188hell no keep your reliability of the 2.0
Y’all I need an answer can I buy these mods to my hatchback 08 manual 2.3
Yes
A mazda 3 smacks a vw g6 how caN it be slow
A vw what? Lol cars slower than a base 1.4t jetta
Nice, your in BC. Ill comment before I watch. Cheers
My 18 GT 2.5 has 184 horse...didn't hear you mention these
Hey Colton, I got a 08 2.3 Mazda 3 hatchback I’ve added new wheels, short ram intake, Megan lowering springs, what should I add to make more hp?
I know u posted this awhile but I’m in the same situation as u so have u found any way to make more power?
@@michaeltaipina2511 hey bro I’m in the same boat have you found anything out lol?
@@marvinescobar473 not really tbh, I did do a full cat back exhaust with a valved muffler and I do notice the car gains a few extra poneys when the valve is open so I would guess an exhaust with better airflow help you gain a couple horsepower
sri, headers, full exhaust and a remap
I have a 2008 Mazda 3 S and need help my car will sometimes try to shut off on me and at first the radio will shut off and turn on then my steering light will come on and finally the car will shut off and when I turn it off all the bushes will max out then go back to normal. When I turn it back on it will be fine for awhile till it does it again. Any help would be nice 😊
Nice, so Ill stick with an intake probably. Im only working with the 2.3L. I just want a bit more sound but not all the time. Cheers.
Have fun!
drove my dads ‘13 mazda 3 5spd until I got my ‘06 speed6. still love the mazda 3 I think maybe one day i’ll grab my dads 3 and MZR DISI mazdaspeed swap it
Dream big ❤
Dumb
Hey, you removed your video for the throttle body ground, do you know or remember any other resources?
th-cam.com/video/q3SvtXoaS-0/w-d-xo.html
@@ColtonRichter awesome, tysm!
Great video
Thanks!
I'm probably the only one looking for what all comes for the mazda 3 motor. I got one in my ford ranger that I'm turning into a sleeper.
Ashes OnFire Same. Not a big enough market of mods for these cars 🤷🏼♂️
@@HomeTheatre101 sadly. I have found drift kits and a supercharger that would fit with some modification... but not much other then the basics.
Are there any turbo kits for your sedan? Also is there any trubo kit for 1.6?
Not direct bolt on, but you can whip up one together from eBay
@@ColtonRichter check out corksport
just want to say the docs have been completely messy up and im wondering if i could get another one somehow
I got a 2009 Mazda 3. Looking to upgrade to a mazdaspeed. Worth it or no?
If you're comfortable driving manual on a daily basis, and looking for a larger world of mod opportunities, then yes!
have you modded it at all?
😊@@ColtonRichter
Arseny+Colton= collaboration
One day 🙃
Hi Colton, was just wondering if i do take the intake resonator off then will i start getting hotter intake temps due to the intake sucking air closer to the engine, therefore getting head radiation from the engine? Seen a lot of good things yet bad things about it at the same time, i want to do the mod but i’m not sure if it will be fully safe
Yes & no, in my own theory I still believe air is being sent through the fender well where the resonator grabs the air from even without it being there, maybe a tad hotter but nothing to go crazy over!
@@ColtonRichter Cheers for the reply. I guess as long as the car is moving it should still be getting cool air from other places. You haven't noticed any excessive temps or overheating in the time that you've had this mod done? I've also just purchased a high flow K&N air filter so I should be getting more air volume regardless.
Any way I can get that google doc you were showing?
It's in the description!
Can you stock tune a Mazda 3 2.3 2008?
Yes, the price, not worth it.
210 horsepower is good enough for an NA mazda 3... If you're really into tuning buy the awd mps wich is even harder to modify... But i dont think you'll ever touch it
210 a lot for an economy car
planning to go through a stage 1 on my 3rd gen mazda 3 1.5 skyactive. am looking for performance. is it recomended? will the stage 1 give some more noticeable juice?
No
Where can I find that articles thanks.
In the description!
Thank you. Thank you for telling the truth. You have saved me so much money and time you do not even understand. Thank you so so much
Hard truth is the best!
That’s why I widened my exhaust all the way through
wish mazda would make something like challenger/370z/camaro/mustang. A stock mazda RWD with 400+ hp oem
The world going economy my friend :(
i do have a question, im not super knowledgeable when it comes to cars, but is it possible to slap a bolt on turbo in my 2.3 if im not rocking forged internals?
Sure
would it ruin my vehicle? e_e
@@ColtonRichter
i have an ‘09 mazda 3, my lights are super bad. what would you suggest to upgrade them?
A basic LED upgrade from eBay 🙂
Just sold my Veloster n for a 2010 Mazda 3 2.5 because it was cheap and I was sick of a payment auto Bach 119 miles what should I do to it ?
Wheels & lowering is always the first 🙂
Dope vid, ive got a 2006 mazda 3 2.0 svt gt-m, it is still not modified for my knowing but ill be sure to make some adjustments when my wallet lets me
Hey there mate what should be the tires size set for 17s oem Mazda rims snowflakes. Thanks!
215/45/17
Anyone know if the 2016 i sport is a good amount of power? It's hard to find the s Touring and s Grand Touring,but a local place near me has the i Sport that looks good. Should I wait and try find an s level trim???
Its fun
ebay supercharger, adjustable rising-rate FPR, a bag full of check valves, wideband o2 (if you care enough)
Does my 2008 mazda 3 2.0l have a tcm on the trans?
If it's an automatic yes
So how solid are the 2.3s if I left it stock and put a simple axle back exhaust on it. Like what are the main failure points that are common with the 2.3s? I heard the timing tensioner likes to fail if that's true is there anyone that sells a better kit
The VVT issue is a MazdaSpeed thing, your NA 2.3 has a HUGE common issue with throwing rods, and burning a ton of oil due to PCV system clog up.
@@ColtonRichter Timming chains on the N/A 2.3s is still a common falure too. I work at a Mazda Spare parts yard and we always have to replace the timming chains whenever we ship out any L3 2.3 motor due to the amount of issues our customers have had after they install them.
Faster than a Subaru Forester
I have a Mazda 3 2005 2.3 any suggestions to make mine faster ?
Go to corksport they have a lot of stuff for the 3. Remember, the mazda 3 is quick, it isnt fast.
got a 2006 mazda 3 sedan 2.0l automatic transmission, any recommendations to make it faster?
Yeah, get a manual 😂
Put a turbo
I don't have a 3 speed just the regular, I'm still looking for mods to make it look cleaner for sure I know I'll get a cold air intake
Check out corksport for performance parts
Question. How fast does yours go. Mine tops out at 100 for some reason
I'm not sure what the governor is
@@ColtonRichter could you make a video on how to take out and replace the wheel liner? Mines is there and I would like to install it. Also thanks for showing me how to change the fender lights they’re dope asf
How about adding a supercharger to the mazda3 sedan will that add horsepower or just make noises
Both I would assume
Better off going with a turbo
I agree that Mazda 3 arent the fastest car in the world, but at the same time, my stock 2008 Axela/3 20S managed to keep up with an IS250 for a short while at a red light drag. I was using manual mode and revving to 5k. Either The driver in the IS250 was a bad driver or the car dealer was lying about the car being fully stock 🤔
Yeah idk wtf hes talking about, my mostly stock 2.3S pulls on challengers an stangs daily until about 100mph ^.^
What about straight pipes?
+69 horsepower
I have a 2011 Mazda 3 2.0L straight piped from the cat back and I don’t know how much power it increases but I would like to say like 5 hp at most, but also it sounds so raw and unique
That google doc is all sorts of f*cked up for me someone did something to it
It definitely has seen better days
Buy a Mazdaspeed 3 😊
Have 2 :)
I just want it to look good and sound good idc how fast
How much horsepower if i upgrade my full catback exhaust like im thinking to get corksport catback
Maybe 1hp if you're lucky
@@ColtonRichter thanks
You know if u can ECU tune a 2.0 mazda 3 2012???
Yeah man it's do-able!
Where shoukd I start on a 2004 Mazda 3 2.3
Wheels & Suspension
My mazda 3 07 has a smell of gas in the oil stick can you help please!!
Bring it to a shop, I can't do much over a computer screen!
hpfp seals kit. look into it
Used engine oil smells like gas.... that is perfectly normal lol.
Change your oil
Put your gas in your gas tank not your oil port
Need that brake vid
Bet 😏
@@ColtonRichter did you do a Mazda 3 brake video can’t find it ?
@@curtismcpherson4823 No... not yet 😅
mazda 3 2015 sounds loud when i starts is there any wrong on the engine?
Not familiar with that year sorry.
Check the oil!
It could just be that the engine is cold, u should turn it on and wait for it to get quieter, usually for me it takes like 10 secs
Does OrangeVirus still tune for the Mazda 3 ?
Wow, now that I look I don't believe they do! Guess they weren't making enough business...
@@ColtonRichter I was looking at their site and I couldn't find anything because I was looking on forums. But I'm sad because I absolutely love Mazda 3. It's not fast but it's a fun car😂
@@ColtonRichter you can email one of the guys there and they will respond. Are they worth the tune and money?
E85, turbo. That’s all I gotta say 😂
Zoom Zoom P i s t o n T o T h e M o o n
Make em go fast-er
how much hp is a 05 2.3L good for
Weak motors, not much
I heard with a cold air intake it will make it fly breAking necks
how do I do this
Buy one but if you live in CA they won’t ship to the state
So still nobody knows how to remove limiter on Mazda 3 2.0L.. it’s obvious the car can go faster it just dios when going 118 119.. so bad somebody help @colton
Wouldn't be able to tell you boss, don't need to go that fast in an economy car myself
Hey I live in an area with tons of pot holes and speed bumps, any recommendations for suspension for my 2011 Mazda 3?
Maybe just an aftermarket spring & strut combo!
anybody find good short throw shifters for the 2004 year mazda 3? can't seem to find much besides ebay ones with no reviews. links appreciated to reputable places/brands
eBay is your only option unfortunately!
Why are suspension, wheels and tires in stage 4? Everyone knows if you want to go fast that’s the first thing you touch
It's a power list, seeing as why suspension's last
not spost to go fast... 800 hp says diff
Mazda 3 not thems3
Step 1: Get a Mazdaspeed 3...
They’re ugly
you can make it fast. Pull the motor, change internals, headers, fuel system, injectors, turbo. hello 500+hp
Very true!
Should this be my first car?
Sure, reliable and fun!
I love my 2008 mazda3 the body is nice but honestly the engine is slow as fuck everybody passes me in the freeway trucks other cars and minivans bikes guys in bicycles I’m like wtf I’m going too speed what’s going on so I’m working on putting a corvette c7 stingray engine on it plus the transmission and the rear transaxle I know it’s gonna be hard but it will be like working on a formula I know your probably saying might as well buy a different car but I like the body of this mazda3 and tricking the people yeah it’s slow but once they see the corvette run there gonna shit there pants and say wow that mazda3 is fast and I would like it to be better a Subaru wrx,Mitsubishi evo and Ford Focus RS
What free way are you on I've gotten my 02 up to 125mphs and hit governor gearing is short enough I honestly don't know if I could hit 140 with out. Governor before hitting rev limiter, so not fast by any means but as far as cheap fwd sub 180hp car goes its kinda quick, for you I would check your air filter then for clogged exhaust and o2 sensor codes.
yeah somethings up with your car, i got an 04 mazda 3 hatchback, and sure the 1-60 feels slow and unresponsive, but after 60 i can reach 100 suprisingly fast for how slow it is at the lower speeds.
but i feel you on the wanting to drop in a sweet engine into it, i will do the same whenever my engine fails just because i love the 3s body
@@sathanas420 i got a 2.5 05 sedan sp5 speed and it goes 1-40 in 3 sec 40-60 2sec 60-80 1 sec 80-140 2 sec combine 8 second to max that’s pretty good for a dohc engine
Maybe add some moped peddles? Zoom zoom 😸
I think I'll just get a Tesla Model 3...
This video was helpful though, thanks.
Is it possible to change the map from a 2.0 125hp to 165hp ?
what drug r u on
Throttle bodies, camshafts, exhaust manifold, cat back, tune.
These engines can see 200+ horsepower in the NC mx5 and in the European fiesta ST150. It’s not all peaky power either, with 175lb-ft from 3000 rpm
At least on the first gen NA 3s, there's no aftermarket TB or cams. Headers and tune makes a helluva difference though. I've got two 3s, one with tune and exhaust mods, one without ... major difference.
Jj Fatts You can get them in the UK/Europe. So you’d need to import them to the states. But we can’t get specific exhausts/manifolds here, so have to source them from the states haha.
No one can escape overseas shopping
A 4 cylinder is still a 4 cylinder
Damn right & they do the most work
Why get a Mazda 3 saloon the MAZDA speed 3 hatchback is way better
Because people can enjoy whatever they want
👍🏼🔰
Victor Martinez jdm
Get a hatchback they well go fast
Unless you mean the speed 3, a hatch motor is the exact same as the sedan.
Air intakes are generally a bad idea for modern cars (2010+). They tune the length of the intake with the gearing and the tune of the engine to make it an all around package. Oiled filters like K&N's will end up putting the oil into your car's combustion chamber as well so keep that in mind.
Intake length is tuned with the gearing... lol
Lol why would you spend money on a Mazda3 just buy a mazdaspeed
Because I'm stubborn and hate hatchbacks 🤣🤣🤣
@@dakkadakka9189 get a mazdaspeed 6 😅😅
@@germanmedrano872 fair enough but those are kind of hard to find where I'm at and a 3.0 5 speed is easier to find and Cheaper then a speed 6, I really have yet to see a speed 6 for sale in my town
I have an 08 mazda3 with non turbo 2.3l. Whats the best mods I can add? Best brands to use?
I got an 09 and would also like to know lmao
About to buy one myself and was wondering the same.
Get high performance spark plugs from ngk, o2 sensors from ntk, this helped me get a better throttle response for cheap, also jet performance makes a mazda 3 intake sensor that supposedly adds power, plus I have an afe filter, blitz makes a 3 filter too that performed nice, he also forget to mention performance engine coils that are easy to install and cheap