Hi I am new at resin however I have the try mode you used but I haven use it because i don't know how much resin to use in the try i also wanted to tell you that i just love how you did the tray thank you for this video very inspiring
I want to do a tray, but make it 3-D. Maybe put a small amount of resin, lay some stuff, let it harden a little, add another layer, etc. Has anybody done this?
Any epoxy ratio dont go by weight on a scale . A 2:1 ratio is equal amounts and cannot be equal by weight due to differences in weight from part a and part b. Home depot sells little clear buckets that has the 1:1 & 2:1 and more ratio. Plus the epoxy thats left can be pulled out after drying
Hello, does placing the flowers first on the silicon mold help with them moving around while resin cures? Because I have tried and they tend to keep moving in the middle.. thanks in advance
I had the same issue. What I do now is pour a thin layer of resin and wait 20 mins before putting the flowers. Since the resin is sticky but not runny, the flowers stay in place. After 12 hrs, pour another layer on top.
Absolutely love this. I'm new at resin making and a friend has asked me to make her a tray with flowers in. Love it thanks for sharing ❤
Gorgeous
This tray is amazing ❤❤😊. Thank you for teaching us how to create such a beautiful tray.😊😊😊Lisa
Love this, nice and simple.
Beautiful. ❤❤❤
This is so beautiful 😊👍🏾.
Hi I am new at resin however I have the try mode you used but I haven use it because i don't know how much resin to use in the try i also wanted to tell you that i just love how you did the tray thank you for this video very inspiring
Nice 👍 love from Pakistan ❤
Most beautiful...
Love from Kashmir ❤️
You could do a small layer of clear, let it get slightly tacky, then put the flowers in, so that you don’t have to keep them from moving(:
Beautiful ❤ do you have to put a polich on top now it finished
Very detailed... Thank you 😊
Was it pretty hard like glass or flexible?
Where did you get your tray ? How much epoxy resin did it take ?
Hi! What if you have sharp edges? Can we use sandpaper to smoothen it?
What are the butterflies made o
What app are you using to get your measurements? I would like to know.
Omg I wanna know the app too
Hello,and nice work but i wonder why you did not use some glue to make flowers and butterflies stick to the bottom of the silicone tray ?.
Perfeito
What’s that app you used?
How do you dull the sharp edges?
You might find it easier to add your foil to the resin before you pour.😊
Hiii
How will I measure resin n hardner
Bu markanın ne kadar zamanda kuruma özelliği var
What app is that? I looked up "rectangle" and nothing came up?
Can you link the torch gun?
Where to get the tray mold or other things?
+What's the name of the app?
What app did u use ?
Epoxy calc
I want to do a tray, but make it 3-D. Maybe put a small amount of resin, lay some stuff, let it harden a little, add another layer, etc. Has anybody done this?
What is the tray made of?
Silicon
How are there NO bubbles???
👏👏👏😍😍😍🌸🌸🌸🌸
After how many hours did u put the handles on ?
At about 9 hours
Any epoxy ratio dont go by weight on a scale . A 2:1 ratio is equal amounts and cannot be equal by weight due to differences in weight from part a and part b. Home depot sells little clear buckets that has the 1:1 & 2:1 and more ratio. Plus the epoxy thats left can be pulled out after drying
Yes you are correct, this video was sent by one of our customers but we always recommend going by volume!
Hello, does placing the flowers first on the silicon mold help with them moving around while resin cures? Because I have tried and they tend to keep moving in the middle.. thanks in advance
I had the same issue. What I do now is pour a thin layer of resin and wait 20 mins before putting the flowers. Since the resin is sticky but not runny, the flowers stay in place. After 12 hrs, pour another layer on top.
ke your video but the music is very irritating and repetative and not very helpful for people with hearing aids we can not hear what you are saying