I plan to do this for my sister and her fiance. They're getting married this year and I wanted this to be my gift to them, preserving the flower they choose for their wedding and so they have a constant gorgeous memory of their wedding
Thank you for such a detailed tutorial. I brought home a shoebox full of flowers from the arraignments for my mother in laws memorial. It will be my first time casting so I'm watching as many tutorials as I can while I dry the flowers.
That sounds lovely, it's worth noting that some brands of resin have different capabilities so it's important to follow the instructions for the resin you're using for best results.
A TH-cam friend of mine sent me this video of yours and I think it's really going to come in handy I'm glad you posted it I've been trying to do the same process but some ideas work some don't
Nicely presented. When sanding flat resin surfaces, I find it easier to put the sandpaper face up on a flat surface, and then move the resin object to and fro against it. It also allows you to use some water for wet sanding.
Absolutely gorgeous I’ve got all the gear I just haven’t got around to doing it but I make flowers out of polymer clay etc I might have a play Loved this video thankyou😊
I've been watching several videos about preserving flowers in resin, but this is the first video I've seen where it's explained to have the best results with drying out the flowers first. I've never seen this done and now I'm wondering if those flowers from the videos I've watched will rot over time!
Thanks for clear and useful video - I can see the layer boundaries in the finished cube I was not expecting that from your tutorial, I understand the reason for limiting the volume of pour but hope there is a way of avoiding these marks ?
Hi John, the only potential way of limiting the layer lines would be to use a degassing chamber. You would need to try and cast the resin in one go and to remove the air. The only way to do this would be to degas the resin while it's in the mould.
There may be some further fading depending on how much light exposure the flower gets. Drying out the flower prior to the encapsulation is certainly a good way to keep the color in the petals and prevent it from degrading further.
Unfortunately yes it is possibly to see some lines when pouring in multiple layers. Pouring at the 'B' stage helps keep the visibility of the lines to a minimum.
Thanks so much! I didn't realise you could dry flowers like this. I have a tiny house (my hall is literally 2 metres long, and pretty narrow). I could almost envision drying leaves and petals from the garden next summer, for a floor........ if sticking them to the floor as in the penny video would not destroy them. However I am worried about how slippery a floor would be, and if it would need to be cleaned constantly to avoid staining, with two large dogs coming and going.
Yes with a contrasting pigmented base layer, flower petals cast in GlassCast would make a stunning floor. GlassCast can be quite slippery when wearing things like socks so may not be the best thing for your dogs. In terms of cleaning, you don't really need to worry about staining but the longer dirt is left on the surface the higher the chance that it would be walked over and damage the high gloss surface. We would generally advise avoiding the use of GlassCast as a floor covering in a high traffic area such as a corridor where you may have muddy feet (and paws) bringing in dirt on a regular basis.
@@glasscastresin Thanks so much for your very prompt reply. It will be no good for the floor if it is slippery, which is a real shame, but my number one priority is safety for the dogs, one of whom i my assistance dog. However, I do have some other ideas though. This is a home Bilbo Baggins would describe as tiny. If I cannot do the floor, I am wondering if I could do a feature wall. Or upcycle an old wardrobe. If I cut some plasterboard into tiles, then prepared them outside in the garden, once dry I could glue them onto the wall. I have one wall with two doors, and a really a tiny surface area. It would be a good place to experiment. If using tiles, how would you suggest I fill in the space between the tiles? Could I use more Glsscast then sand down/polish to a shine?
@@rottsandspotsI was talking with my daughter about tiny homes and thought a dried flower "window" for the sliding door to toilet/bathroom would work and also possibly the lip to the shower. Little areas with little surface abraision
I loved this video and I really need your help with floating large items in epoxy…My wife has passed and I I want to create a large glasslike epoxy piece with her personal and most favorite belongings inside of it to like some of her favorite things inside of it like her perfume bottles, some of her high end makeup, her quite large designer hand bag, her sunglasses and several pictures. I feel this would be the perfect way to preserve her items and honor my best friend and my wife and I know you are the only person in the whole world that can help me make this a reality…PLEASE HELP ME Honor Her In The BEST Way I Know She Would Love!!!
Hi Albert, sorry to hear of your loss. If you would like to send us an email to help@glasscastresin.com, our team will be able to offer some advice from there.
I want to make gaps in spoon handles and set tiny dried indigenous South African wild flowers into them. I have a pretty good idea of the technological hurdles...
If you mean to simulate the water inside the vase then no, we wouldn't recommend a rigid curing epoxy like this as the small amount of expansion and contraction during the curing phase is likely to crack a glass vase, Instead, you would be better placed to use a product like Aquallusion which is softer and specifically designed for this kind of project..
You certainly could do yes and if you have access to a degassing chamber, it can really help to draw out the air bubbles that get trapped in and between the petals. You may also be able to reduce the total number of layers needed.
Thank you for the video, I have already dried my flowers before I realised that the kit supplied a drying mixture. Question am I too late to use the epoxy Technic?
If you are confident the flowers are dry, then you do not need to do that stage of the process and can move straight to the main part of encapsulating in resin.
Being fabric based, the resin will soak into the material. It might be worth doing an experiment as a lot of fabrics change colour and/or become semi translucent when wetted with resin.
Is someone willing to comment a list of materials for me, if I were to buy them separate from the kit? What kind of drying agent should I buy? Impeccable video, wonderful tutorial. Thank you very much for your considerate lesson.
Hi thanks for your comment, you can buy the materials from our website www.glasscastresin.com/ If you look at the kit contents, you can also purchase all of these materials separately in larger quantities. The resin ktis we supply come with both resin and hardener together so no separate hardener is required. Alternatively if you email help@glasscastresin.com we would be happy to advise on your specific requirements.
I bought my kit and followed your instructions on the video which was excellent but there was not enough to cover my rose from my cousins funeral so had to make some more to cover it. Everything went well until then so in the last pour it became hot and when I checked it had set with with uneven bubbles very and burned the top of the rose any idea where I went wrong I’m trying to sand it down at the moment to see if I can save any of it
Hi Yvonne, Sorry to hear that you've had an issue with your casting, if you would like to drop an email to help@glasscastresin.com our team will be happy to advise.
Hello there :) I love this video! Can I let the flowers rest in silica powder for two weeks while I'm on my honeymoon and then keep going with the process afterwards?
Thanks for the tutorial, i want to try and get a mimosa flower in resin, since they only bloom 1 to 2 days and are stupidly fragile. It just feels wrong to try and make the bloom eternal. Which is why i want to do it to be honest. Looks like i still have about 7 attempts left this year.
Great detailed video! I'm very new to resin for flower preservation but I saved flowers from my son's wedding, and this will be my first project (I'm going to practice first, though). I have a question... is there a such thing as "too dry" for flowers? Can you leave your flowers in silica gel too long, where it will damage them?
Hi there, no the flowers cant be too dry. I would suggest getting them into the crystals as soon as possible to preserve them whilst they are at their freshest. You can then take as long as you want to do your practice castings and once dry the flowers will keep for as long as you need.
@@glasscastresin THANK YOU! That's a relief. I got the idea to preserve them and immediately ordered supplies from Amazon. I got them in silica gel a couple of days after the wedding (some 3 days, since I needed to get more silica gel). They still looked good, though, so I'm hopeful about the resin step. Thanks for responding!
The ideal time to add the next layer is when the previous one has cured to the 'B' stage and the resin has cured firm with a slight tack to the surface. With GlassCast 50 this is around 12 hours at 20°C
Hello, please, tell me why you don't use a dryer to pop down the bubbles? Is because the cube is small? Started at what meassure do you recommend to use the dryer ? Or not at all...? Thanks!
GlassCast 50 is very good at releasing trapped air by itself and shouldn't need any external help to remove any bubbles. If there has been excessive air trapped in the resin from the mixing process or there are some bubbles which aren't naturally disappearing then you can use some gentle heat to help remove them from the resin.
As long as the flowers are fully dried, any drying method can work yes. The crystal dry is a product anyone can use at home but if you have access to freeze dried flowers then these would be fine to use.
It is not something we have tried. The concern would be that the icing sugar would break down with the wet epoxy. Worth an experiment for sure to see if it stays as a solid material.
Its not something we have specifically tried to preserve. You may find others who have done the exact flower before have more specific advice where it differs to typical flower drying.
Hi David, if your referring to a release agent then in this case no. Epoxy resin does not stick to silicone so no release agent is required, although this will differ depending on the mould material.
A refrigerator may slightly prolong the life but I wouldn't be able to say for how long. Once dry however, the flowers will keep indefinitely. My suggestion would be to get the flowers into the drying crystals as soon as possible to preserve them in their best condition, then you can store them for a while if not needed straight away.
Not really without thoroughly drying it. Any remnant moisture is likely to bleed into the resin as it cures giving tiny air bubbles or a milkiness within the resin.
Hi! I’m looking to preserve a 1) candy (made of sugar, glucose syrup) and 2) a confectionary similar to a madeleine with sugar frosting. Can this resin kit be used? People mention the resin preservation process might melt them, but I don’t see any heat introduced?
We haven't cast candy as far as I'm aware but that's not to say it wont work. There is a bit of heat generated as the chemical reaction takes place for the resin to cure but it shouldn't be anywhere near high enough for the sugar to melt. You could always do a test run with a small amount. It may also help to coat the item with a layer of resin brushed over the surface and let that cure to the 'B' stage before doing the main casting.
It's not something that we have tried so you might need to experiment first. As long as you completely dry out the vegetables with the silicone as you would for flowers, then you should be okay to follow the same process.
If you are placing the flower upside down then yes it might be advisable to fill the flowerhead with resin first to try and eliminate it from trapping air as you pour the rest of the resin into the mould.
As an EU, I cannot find the kit in the easy composites website, what should I do? I also cannot find only the silica crystals to be bought separately on that website.
In theory once dry. However it is quite likely the tea bag will change colour and the tea leaves themselves may well leach tea into the resin discolouring it. You may want to experiment sealing the bag with brush applied resin in the hope it stops that happening.
What can I use to liven or enhance the dried flower color. I have a white rose and white orchid that’s dried in Silica but im afraid it’ll turn translucent in resin can I paint them?
Not something we have seen so you would probably want to experiment. The problem is a lot of flowers are very delicate so it may be difficult to apply a coating without damaging it. Certainly one to try first before committing to a large project.
Hi Billy, We don't stock the starter kits on the EU website, however if you email sales@easycmoposites.com the team may be able to work something out with you.
If thoroughly dried (so there is no moisture content trapped inside the resin), it should last as long as the resin itself so certainly a lifetime if looked after.
Hi Kiara, Yes photos and pictures can be cast in resin but there are a few considerations. You will need to check that the inks used and the substrate itself won't bleed or break down in the resin so a test will be required. Most professional photos will be fine but, If you do find that the inks are bleeding then you can coat the picture with a PVA solution and let that dry, prior to coating/casting in the resin.
Is there a maximum about of time the flowers can be in the drying stuff? Like can I add them before the honey moon (wait 9 days) and then take them out? Or should I put them in the freezer while we are gone and then start on them when I get back? There is a 2 day gap between the wedding and the honeymoon so I want to be careful!
No there is no maximum thie which the flowers can be left in the crystals. Once they are dry they effectively become stabilised and should be preserved in that state.
We started with a 120grit and worked through the grades to 1200grit. We then used our NW1 polishing compound which comes with the kit and can also be found on our website.
At the moment, we're not selling these through our EU warehouse although are looking at options to do so. We can supply you with the GlassCast 10 or 50 resin but not the whole kit I'm afraid so you'd need to seek out the drying crystals and silicone moulds separately - often available on Amazon, etc.
Epoxy resins have very little smell, the resin is almost completely odourless and the hardener has a slight amonia smell which doesn't really carry or linger. In this respect epoxies are very different to polyester resin which has a very strong smell and cannot realistically be used indoors. As always, you should still follow safety precautions and ensure adequate ventilation of your work area.
You can use our resin calculator to help work out the quantity of resin. www.glasscastresin.com/resin-calculator. The volume of that box is about 7litres so you would need about 6-7kg of resin, depending on the volume that the flowers take up.
Assuming you mean to give them more vivid colours then I don't see why not as long as the paint is fully dried/cured. One thing to watch out for though is if the colourant from the paint bleeds into the resin. To be sure, I'd give it a small test on maybe a single petal to make sure it works as you need it to,
Did you use dried or fresh flower? I want to do this with chrysanthemum flower but not sure to use dried or fresh. I heard that fresh flowers eill decay in the resin.
Hi, when shipping dangerous goods to the US we are extremely limited in courier options. On small orders the shipping fee is expensive as it includes a £55 surcharge on DG orders, but on larger orders it's not so bad as the surcharge is fixed.
I’m keeping one of the flowers from the bouquet I got my gf. Gonna store it in resin and give it it to her as part of her anniversary gift
I plan to do this for my sister and her fiance. They're getting married this year and I wanted this to be my gift to them, preserving the flower they choose for their wedding and so they have a constant gorgeous memory of their wedding
from where you can buy this kit??
Thats so cool! I'm also going to preserve my sisters wedding flowers in resin! ^^
Thank you for such a detailed tutorial. I brought home a shoebox full of flowers from the arraignments for my mother in laws memorial. It will be my first time casting so I'm watching as many tutorials as I can while I dry the flowers.
That sounds lovely, it's worth noting that some brands of resin have different capabilities so it's important to follow the instructions for the resin you're using for best results.
Price plzz for resinflower kit
I need a kit. My grandma passed away in 2018 and I want to use a rose from her backyard for memories
Hi Jeanette, I'm sure that will make a lovely keepsake.
🔁
Rught
This is exactly why I am here. I am so sorry for your loss.
That's so lovely, I'm sure your grandma would love this ❤
I'm so glad I decided to watch this before doing my first floral resin project....😅💜
Thank you so much! This is by far one of the best videos on casting roses!
Thanks Sandra, glad that you enjoyed the video!
I'm gonna try this with flowers from my mom's garden. Such a lovely way to preserve memories 💐🌿🌺
Thanks for commenting, it's certainly a lovely and thoughtful way to preserve precious memories! I hope that it turns out as you expect :)
Great job 👏 thank you for sharing
It looks like a lot of work
That’s the reason why we should appreciate others people hard work
Respect ✊ so much professionalism and well presented knowledge
Thanks for the feedback.
Excellent tutorial.thanks a lot for posting.will sure try making mine.❤
That high gloss finish is lovely!!
That's pretty hard pour. Thanks for the educational video!
Hello
thank you! I still have the flower my boyfriend gave me when he asked me out, I want to preserve it and this was so helpful!
Glad to hear it. Sounds like a lovely way to remember the occasion!
Awesome teacher👌🏾👏🏾👏🏾👏🏾
What a great video. Right to the point and well explained.
Excellent video!
A TH-cam friend of mine sent me this video of yours and I think it's really going to come in handy I'm glad you posted it I've been trying to do the same process but some ideas work some don't
I am in the process of casting dried flowers after removing them from silica powder. This helped I will let you know how it goes.
How did it go?
Hello
Thanks so Much for your detailed classes!!!❤🎉🎉🎉🎉🎉🎉I absolutely Love Them!!!
and thank you for the feedback :)
Great tutorial video. Thank you for posting it.
Thanks for the feedback, makes it worthwhile and makes us want to put more videos together! :)
Nicely presented. When sanding flat resin surfaces, I find it easier to put the sandpaper face up on a flat surface, and then move the resin object to and fro against it. It also allows you to use some water for wet sanding.
Thanks for watching, yes this technique works well for smaller objects.
Excellent 👍 thanks for posting. Sure to try
Thank you so much for your detailed instruction
Glad you found it helpful, thanks for watching.
Absolutely gorgeous I’ve got all the gear I just haven’t got around to doing it but I make flowers out of polymer clay etc I might have a play Loved this video thankyou😊
Hello
I've been watching several videos about preserving flowers in resin, but this is the first video I've seen where it's explained to have the best results with drying out the flowers first. I've never seen this done and now I'm wondering if those flowers from the videos I've watched will rot over time!
Its hard to say as it is in a sealed environment once the resin cures but it is certainly possible they could degrade a fair bit initially.
I got fresh rainbow colored rose for my birthday and I want to preserve
love your video so easy to follow thank you so much
Thanks for the feedback.
Excellent tutorial very interesting and informative
so well explained... tks
That is so Beautiful ❤️
Wow very beautiful ,im srilankan,,i like your video, i m like resin job
Thanks for watching, glad you liked it.
Thanks for clear and useful video - I can see the layer boundaries in the finished cube I was not expecting that from your tutorial, I understand the reason for limiting the volume of pour but hope there is a way of avoiding these marks ?
Hi John, the only potential way of limiting the layer lines would be to use a degassing chamber. You would need to try and cast the resin in one go and to remove the air. The only way to do this would be to degas the resin while it's in the mould.
@@glasscastresin what is the process?
Will the flower fade in resin??
There may be some further fading depending on how much light exposure the flower gets. Drying out the flower prior to the encapsulation is certainly a good way to keep the color in the petals and prevent it from degrading further.
❤❤❤great video
Bedankt de goede uitleg, leerzaam 🇳🇱🌹
Thank you
Thank you very much..
How would I epoxy my wife’s purse to honor her and preserve it??? Does anybody know how to do it???
Thanks for the video! Totally beautiful!
11:48 But we can still clearly see the edges of different layers.
Unfortunately yes it is possibly to see some lines when pouring in multiple layers. Pouring at the 'B' stage helps keep the visibility of the lines to a minimum.
Thank youu soo much..
Thanks so much! I didn't realise you could dry flowers like this. I have a tiny house (my hall is literally 2 metres long, and pretty narrow). I could almost envision drying leaves and petals from the garden next summer, for a floor........ if sticking them to the floor as in the penny video would not destroy them. However I am worried about how slippery a floor would be, and if it would need to be cleaned constantly to avoid staining, with two large dogs coming and going.
Yes with a contrasting pigmented base layer, flower petals cast in GlassCast would make a stunning floor. GlassCast can be quite slippery when wearing things like socks so may not be the best thing for your dogs. In terms of cleaning, you don't really need to worry about staining but the longer dirt is left on the surface the higher the chance that it would be walked over and damage the high gloss surface. We would generally advise avoiding the use of GlassCast as a floor covering in a high traffic area such as a corridor where you may have muddy feet (and paws) bringing in dirt on a regular basis.
@@glasscastresin Thanks so much for your very prompt reply. It will be no good for the floor if it is slippery, which is a real shame, but my number one priority is safety for the dogs, one of whom i my assistance dog. However, I do have some other ideas though.
This is a home Bilbo Baggins would describe as tiny. If I cannot do the floor, I am wondering if I could do a feature wall. Or upcycle an old wardrobe. If I cut some plasterboard into tiles, then prepared them outside in the garden, once dry I could glue them onto the wall. I have one wall with two doors, and a really a tiny surface area. It would be a good place to experiment. If using tiles, how would you suggest I fill in the space between the tiles? Could I use more Glsscast then sand down/polish to a shine?
Hello
@@rottsandspotsI was talking with my daughter about tiny homes and thought a dried flower "window" for the sliding door to toilet/bathroom would work and also possibly the lip to the shower. Little areas with little surface abraision
Thank you♥️♥️♥️♥️♥️
I loved this video and I really need your help with floating large items in epoxy…My wife has passed and I I want to create a large glasslike epoxy piece with her personal and most favorite belongings inside of it to like some of her favorite things inside of it like her perfume bottles, some of her high end makeup, her quite large designer hand bag, her sunglasses and several pictures. I feel this would be the perfect way to preserve her items and honor my best friend and my wife and I know you are the only person in the whole world that can help me make this a reality…PLEASE HELP ME Honor Her In The BEST Way I Know She Would Love!!!
Hi Albert, sorry to hear of your loss. If you would like to send us an email to help@glasscastresin.com, our team will be able to offer some advice from there.
this is soo cool
Glad you enjoyed!
Nice. I will try to make 5cm x 5cm x 5cm blocks. will you please let me know how to buy the rubber container? Thank you!
We only sell 6.5cm square moulds which are here: www.glasscastresin.com/65mm-silicone-cube-mould
I want to make gaps in spoon handles and set tiny dried indigenous South African wild flowers into them. I have a pretty good idea of the technological hurdles...
Sounds like a great idea.
Very good and explained well.
How scalable is it if you wanted to have the flowers inside a tabletop?
Could insects be done the same way?
Any encapsulated item is going to reduce the volume of resin used by the volume of the item.
So beautiful good job
Do you recommend this when making artificial flowers for stability for in the vase
If you mean to simulate the water inside the vase then no, we wouldn't recommend a rigid curing epoxy like this as the small amount of expansion and contraction during the curing phase is likely to crack a glass vase, Instead, you would be better placed to use a product like Aquallusion which is softer and specifically designed for this kind of project..
Thank you for a wonderful and detailed explanation. I would like to make a book holder/stand, I hope you can help with some info..☺
You just need to find a mould the right shape. The principle would be the same.
Thanks, could you use a vacuum chamber de de-gas the bubbles under low vaccum.
You certainly could do yes and if you have access to a degassing chamber, it can really help to draw out the air bubbles that get trapped in and between the petals. You may also be able to reduce the total number of layers needed.
I learned a lot. Thank you. I do want to know if it is advisable to mix used silica with unused one?
Yes you can as the crystals can be reactivated when overly saturated with moisture.
So do you saturate the used portion to reactivate
@@silverguardiancreations2014 No, they need to be dried for 1-2 hours at around 100'C in an oven on a suitable baking tray.
Thank you for the video, I have already dried my flowers before I realised that the kit supplied a drying mixture. Question am I too late to use the epoxy Technic?
If you are confident the flowers are dry, then you do not need to do that stage of the process and can move straight to the main part of encapsulating in resin.
I love this. Can this process be used with silk flowers?
Being fabric based, the resin will soak into the material. It might be worth doing an experiment as a lot of fabrics change colour and/or become semi translucent when wetted with resin.
Borax is also good at drying flowers.
Is someone willing to comment a list of materials for me, if I were to buy them separate from the kit? What kind of drying agent should I buy?
Impeccable video, wonderful tutorial. Thank you very much for your considerate lesson.
Hi thanks for your comment, you can buy the materials from our website www.glasscastresin.com/
If you look at the kit contents, you can also purchase all of these materials separately in larger quantities. The resin ktis we supply come with both resin and hardener together so no separate hardener is required. Alternatively if you email help@glasscastresin.com we would be happy to advise on your specific requirements.
I bought my kit and followed your instructions on the video which was excellent but there was not enough to cover my rose from my cousins funeral so had to make some more to cover it. Everything went well until then so in the last pour it became hot and when I checked it had set with with uneven bubbles very and burned the top of the rose any idea where I went wrong I’m trying to sand it down at the moment to see if I can save any of it
Hi Yvonne,
Sorry to hear that you've had an issue with your casting, if you would like to drop an email to help@glasscastresin.com our team will be happy to advise.
Hello there :) I love this video! Can I let the flowers rest in silica powder for two weeks while I'm on my honeymoon and then keep going with the process afterwards?
Yes you can leave the flowers in the drying agent for as long you need.
Thanks for the tutorial, i want to try and get a mimosa flower in resin, since they only bloom 1 to 2 days and are stupidly fragile. It just feels wrong to try and make the bloom eternal. Which is why i want to do it to be honest. Looks like i still have about 7 attempts left this year.
You would have to take care both during the drying process and resin work to avoid damage. It may be difficult to do.
Great detailed video! I'm very new to resin for flower preservation but I saved flowers from my son's wedding, and this will be my first project (I'm going to practice first, though). I have a question... is there a such thing as "too dry" for flowers? Can you leave your flowers in silica gel too long, where it will damage them?
Hi there, no the flowers cant be too dry. I would suggest getting them into the crystals as soon as possible to preserve them whilst they are at their freshest. You can then take as long as you want to do your practice castings and once dry the flowers will keep for as long as you need.
@@glasscastresin THANK YOU! That's a relief. I got the idea to preserve them and immediately ordered supplies from Amazon. I got them in silica gel a couple of days after the wedding (some 3 days, since I needed to get more silica gel). They still looked good, though, so I'm hopeful about the resin step. Thanks for responding!
How much time between layers? I should wait before I pour another one?
The ideal time to add the next layer is when the previous one has cured to the 'B' stage and the resin has cured firm with a slight tack to the surface. With GlassCast 50 this is around 12 hours at 20°C
Do you use different cups for each layer of resin?
It's likely that the resin in the cup form the first pour will not be fully cured so it's a good idea to use a clean mixing cup for each layer.
this was pterodactylly pretty and promotion ;[
Hello, please, tell me why you don't use a dryer to pop down the bubbles? Is because the cube is small? Started at what meassure do you recommend to use the dryer ? Or not at all...? Thanks!
GlassCast 50 is very good at releasing trapped air by itself and shouldn't need any external help to remove any bubbles. If there has been excessive air trapped in the resin from the mixing process or there are some bubbles which aren't naturally disappearing then you can use some gentle heat to help remove them from the resin.
Plz share how you removed bubbles from the first layer to the final layer of epoxy??
Waft a heat gun over the surface and any remaining bubbles will rise and pop.
Can you freeze dry the flowers to make it work as well?
As long as the flowers are fully dried, any drying method can work yes. The crystal dry is a product anyone can use at home but if you have access to freeze dried flowers then these would be fine to use.
Hi, would this work with icing flowers from a wedding cake? We have 1 that i would like to preserve. Thankyou
It is not something we have tried. The concern would be that the icing sugar would break down with the wet epoxy. Worth an experiment for sure to see if it stays as a solid material.
This kit would be the perfect gift for a friend of mine, too bad you don't stock these in the European wharehouse :(
Can you make a vedio how to preserve bhramkamal it's for my grandmother
Its not something we have specifically tried to preserve. You may find others who have done the exact flower before have more specific advice where it differs to typical flower drying.
I have tried this kit for the first time and have had some mistakes on the finished product and was wondering if there is anyway to fix them please
It depends on the mistakes. Bubbles on the surface can be sanded out. Defects much deeper in the resin may not be accessible.
Rhanks
Do you need a separating medium
Hi David, if your referring to a release agent then in this case no. Epoxy resin does not stick to silicone so no release agent is required, although this will differ depending on the mould material.
If you are not going to resin the flowers right away - could u put the flower in the refrigerator
A refrigerator may slightly prolong the life but I wouldn't be able to say for how long. Once dry however, the flowers will keep indefinitely. My suggestion would be to get the flowers into the drying crystals as soon as possible to preserve them in their best condition, then you can store them for a while if not needed straight away.
Still question....how did you pop the bubble
You can waft a heat gun over the surface or pop the more stubborn ones using a cocktail stick or similar to remove them when trapped.
Can you use a flower that has alot of moisture like a daffodil
Not really without thoroughly drying it. Any remnant moisture is likely to bleed into the resin as it cures giving tiny air bubbles or a milkiness within the resin.
Hi! I’m looking to preserve a 1) candy (made of sugar, glucose syrup) and 2) a confectionary similar to a madeleine with sugar frosting.
Can this resin kit be used? People mention the resin preservation process might melt them, but I don’t see any heat introduced?
We haven't cast candy as far as I'm aware but that's not to say it wont work. There is a bit of heat generated as the chemical reaction takes place for the resin to cure but it shouldn't be anywhere near high enough for the sugar to melt. You could always do a test run with a small amount. It may also help to coat the item with a layer of resin brushed over the surface and let that cure to the 'B' stage before doing the main casting.
Hi .. can you recommend a resin polishing wax for a high gloss finish??
The Ultra-Gloss Top-Finish 2 from Pai Boat works exceptionally well following the NW1 cutting compound.
from where i can buy these liquids
Can you preserve vegetables? My nice has a garden and gets some crazy shaped vegetables sometimes. (Jalapeños, carrots etc.)
It's not something that we have tried so you might need to experiment first. As long as you completely dry out the vegetables with the silicone as you would for flowers, then you should be okay to follow the same process.
please if you can help me with this... if im making my project upside down should I pour resin in my flower first than putting in the resin mold
If you are placing the flower upside down then yes it might be advisable to fill the flowerhead with resin first to try and eliminate it from trapping air as you pour the rest of the resin into the mould.
As an EU, I cannot find the kit in the easy composites website, what should I do? I also cannot find only the silica crystals to be bought separately on that website.
Unfortunately this kit is not yet available from our EU website.
Would this work with tea bags instead of flower??
In theory once dry. However it is quite likely the tea bag will change colour and the tea leaves themselves may well leach tea into the resin discolouring it. You may want to experiment sealing the bag with brush applied resin in the hope it stops that happening.
Can you use this flower resin set for other objects instead of a flower??
You could use the resins and moulds however, the silica crystals would be redundant if the object you intend to encapsulate is already dry.
What can I use to liven or enhance the dried flower color. I have a white rose and white orchid that’s dried in Silica but im afraid it’ll turn translucent in resin can I paint them?
Not something we have seen so you would probably want to experiment. The problem is a lot of flowers are very delicate so it may be difficult to apply a coating without damaging it. Certainly one to try first before committing to a large project.
Hey I ca t find this kit on the European site? Any help much appreciated
Hi Billy,
We don't stock the starter kits on the EU website, however if you email sales@easycmoposites.com the team may be able to work something out with you.
Does this immortalize the flowers? And if not, how long do they last?
If thoroughly dried (so there is no moisture content trapped inside the resin), it should last as long as the resin itself so certainly a lifetime if looked after.
Can we put in a picture as well?
Hi Kiara,
Yes photos and pictures can be cast in resin but there are a few considerations. You will need to check that the inks used and the substrate itself won't bleed or break down in the resin so a test will be required. Most professional photos will be fine but, If you do find that the inks are bleeding then you can coat the picture with a PVA solution and let that dry, prior to coating/casting in the resin.
Is there a maximum about of time the flowers can be in the drying stuff? Like can I add them before the honey moon (wait 9 days) and then take them out? Or should I put them in the freezer while we are gone and then start on them when I get back? There is a 2 day gap between the wedding and the honeymoon so I want to be careful!
No there is no maximum thie which the flowers can be left in the crystals. Once they are dry they effectively become stabilised and should be preserved in that state.
@@glasscastresin Amazing. Thank you so much for such a quick reply!!
What grit sandpaper did you use and what’s the name of the polishing compound
We started with a 120grit and worked through the grades to 1200grit. We then used our NW1 polishing compound which comes with the kit and can also be found on our website.
You can see the three separate pour layers in the final product. Not a huge fan of that outcome but a great video regardless
Hello👋 Thanks for the video, very well explained 👍 How could I get a kit in Luxembourg in EU ? I couldn't find a answer on the net 😢
At the moment, we're not selling these through our EU warehouse although are looking at options to do so. We can supply you with the GlassCast 10 or 50 resin but not the whole kit I'm afraid so you'd need to seek out the drying crystals and silicone moulds separately - often available on Amazon, etc.
Oh sad.. but thanks a lot for the advice 👌😉
I've been putting fresh flowers in the silica powder. When dried, do I need to cast immediately? Or can I store the dried flowers?
You can store them but ensure it is in a dry environment such as in tupperware.
Does diatomaceous earth work?
Not heard of it being used to dry flowers.
Do you have any tips on embedding orchids specifically?
They're not really any different to other flower types, if you follow the same processes as here you should get the same results :)
He really carefully to not crush them when dried
Is there a strong smell when you use the resin?
Epoxy resins have very little smell, the resin is almost completely odourless and the hardener has a slight amonia smell which doesn't really carry or linger.
In this respect epoxies are very different to polyester resin which has a very strong smell and cannot realistically be used indoors. As always, you should still follow safety precautions and ensure adequate ventilation of your work area.
Can this be shipped to Jamaica
Unfortunately due to the 'dangerous goods' classification of the resin used in this kit, we do not have a courier option for Jamaica
How much resin would you recommend for a double stranded orchid leis? I would roughly say a rectangular box 12-18”tall by 4” thick by 6” wide?
You can use our resin calculator to help work out the quantity of resin. www.glasscastresin.com/resin-calculator. The volume of that box is about 7litres so you would need about 6-7kg of resin, depending on the volume that the flowers take up.
Can you use an airbrush and paint the petals??m
Assuming you mean to give them more vivid colours then I don't see why not as long as the paint is fully dried/cured. One thing to watch out for though is if the colourant from the paint bleeds into the resin. To be sure, I'd give it a small test on maybe a single petal to make sure it works as you need it to,
Did you use dried or fresh flower?
I want to do this with chrysanthemum flower but not sure to use dried or fresh.
I heard that fresh flowers eill decay in the resin.
The flower was fresh then it was dried as shown in the video.
Wow I need this kit but I can't afford to have it shipped to the U.S.
Hi, when shipping dangerous goods to the US we are extremely limited in courier options. On small orders the shipping fee is expensive as it includes a £55 surcharge on DG orders, but on larger orders it's not so bad as the surcharge is fixed.
How can I buy the kit that you have in this video?
You can find it on our website by following the link: www.glasscastresin.com/resin-flowers-kit