I love these molds! I noticed tho they’re a little bendy? I’ve made sure my mix is accurate a few times and still the same. I was curious if you had the same issue?
You place the handles in the poured resin which holds the handles. However, when you turned the tray over there appears to be screws going through the underside of the board that would attach to the handles.
Hi Nadia! This is absolutely gorgeous! I have probably a silly question but after the latex dried and you’re getting ready to top coat it, did you place the tray on lifts for the resin to drip off or let it sit on the mat. The reason I ask is because I put mine on little plastic cups but the tray will bend since it’s not fully cured. I guess I could wait a few days but I was anxious 😬
Thank you! No, it won’t melt the resin but could leave a small dent. We top coat with a higher heat resistant/protective top coat such as DCS Resin or Honey Resin by Dipon. You can use my code ‘SUMMERGIRL’ to save 10% 😊
Thanks so much for your prompt reply!!! I have a couple of questions: did you add some strokes to make it look this way? I’m in USA and cannot find the honey resin. I’ll try the DCS. Thanks for sharing your beautiful designs!
@@lindac1259 The resin slowly pulls in over time creating striations on its own. If you're in the US, I can also recommend Craft Resin - you can use this link to save 10% :) go.referralcandy.com/share/G537QB2
It is a beautiful and elegant tray! 😍👍🏼 I had the experience with the color in the edges (gold or silver), they pilled or get scratched very easy, do you have the same experience or not??? I’m thinking that maybe doing the edges before the clear top coat, can be a good idea! I’ll try that! By the way thanks for the tip of the latex, I didn’t have idea about that!
Room temperature or slightly higher than room temperature is ideal. Blush could be caused by high humidity levels and can be fixed by adding a top coat 😊
Hey Nadia. Another questions sorry hehe. But what kind of latex is it? I mean is there a specific latex for resin or any latex is okay? And whats the difference between coating / pouring clear resin after demolding and before demolding? Is before demolding easier? I want to learn resin arts so i need more informations. Thank you in advance.
Any liquid latex should be fine! I’ve used a brand ‘meant’ for horror make up and it was the same as any other brand. Top coating out of the mold leaves a nice domed finished, for more info check out my video here: th-cam.com/video/5-VBL4k24ho/w-d-xo.html 😊
A low viscosity resin 😊 I highly recommend Dipon (located in EU), you can save 10% with my code ‘summergirl’. If you’re located in the U.S, I can highly recommend Craft Resin, you can save 5% with my link: craftresin-us.refr.cc/summergirlcroatia
Job Well DONE. Your teaching is the very BEST way to learn how to make a resin tray. You were very clear from beginning to the end, thank you ❤
Black and silver don't normally do it for me but this shimmery set has me rethinking palettes ;) Thank you!
Stunningly beautiful! Thank you for sharing your talent, process, and products! 👌
Very pretty~! I wish I knew the difference of putting the top coat in the mold and the way you did it! First time seeing that.
This is beautiful tray. The colors makes it look dressy.❤❤❤😊
Thank you 😊❤
Very beautiful. I love it!
Beautiful, im just learning, can't wait till start, im in Ontario Canada
It’s so beautiful 😊
I ❤ watching your videos!
HI Nadia, WOW really loved the way your Tray turned out thanks for sharing 👍❤️Lin
Thank you Linda! 😊💗
Beautiful tray Nadia, well done x
Precioso!!!!, gracias por el tutorial y por la traducción al español, gracias
Wow 🤩 so beautiful 😻
Stun-ning!!
Such a stunning piece!
Thank you! 🥰
Very pretty tray
Woww, it's so beatifull.
BEAUTIFUL
This is stunning, thank you for sharing x
Thank you so much 💗
Stunning piece
OMG this is beyond beautiful!!!New sub here. I’m waiting for my resin and my silicone mold to try something similar to this ❤❤❤❤❤
This came out so gorgeous! 😍
Thank you! 🥰
Muazzam bir eser ellerinize emeğinize sağlık teşekkür ediyorum.
Stunningly gorgeous!!
Masterpiece
Beautiful
How beautiful so elegant!
Thank you! 💖
spectacular
Magnifique 💗 💗
STUNNING!! NEW SUBSCRIBER!!
I love these molds! I noticed tho they’re a little bendy? I’ve made sure my mix is accurate a few times and still the same. I was curious if you had the same issue?
This is so beautiful...wow.a question please,the top coat is it a mixture of part A and B?
Really pretty Nadia love the Smokey look of this 😘😘🦋🦋
Thank you Barbara 🥰
Does it dry naturally if you leave it till the next day? I am a beginner and your videos are beautiful. Learning a lot. Thanks so much!
You place the handles in the poured resin which holds the handles. However, when you turned the tray over there appears to be screws going through the underside of the board that would attach to the handles.
I also want to know how she placed those handles?
Same. Because mine fall into the resin every time. I usually just wait until it cures and then drill them in with a low impact drill.
Beautiful.
Beautiful work😍
How did you get from 5:09, which is pretty bad to 5:15 which is beautiful? Something pretty drastic happened between those 2 shots.
This a nice piece …How much Resin did you use for this mold?
U can use any aap for it by giving the length and breath size of the mold
Liquid latex! Genius!
Beautiful 😍
So gorgeous👍👍
What viscosity resin did you use for this? 😍
good job
love it
MERCI super tuto ❤❤. Savez-vous la quantité de resine nécessaire pour un plateau svp?
Nice. But I don't understand one part, that backside which metarials use it. Please reply
Hi Nadia! This is absolutely gorgeous! I have probably a silly question but after the latex dried and you’re getting ready to top coat it, did you place the tray on lifts for the resin to drip off or let it sit on the mat. The reason I ask is because I put mine on little plastic cups but the tray will bend since it’s not fully cured. I guess I could wait a few days but I was anxious 😬
Love it 😍
Thank you 💗
Lovely tray. Is it not possible to use adhesive tape instead of latex
How much resin did it take to make this very beautiful
Is putting handles like this safe or do we drill them to be safe?
Hello.Nice work. But if you put hot mug on this, it will not start melting the resin?
Thank you! No, it won’t melt the resin but could leave a small dent. We top coat with a higher heat resistant/protective top coat such as DCS Resin or Honey Resin by Dipon. You can use my code ‘SUMMERGIRL’ to save 10% 😊
Divina
Was the top coat a mixture of part A and B resin please
So gorgeous!!! I am new at using resin, so I was wondering what Top Coat did you use?
Thank you! If I’m working with Dipon I love to topcoat with either Honey Resin or DCS Resin, in this case I used DCS Resin
Thanks so much for your prompt reply!!! I have a couple of questions: did you add some strokes to make it look this way? I’m in USA and cannot find the honey resin. I’ll try the DCS. Thanks for sharing your beautiful designs!
@@lindac1259 The resin slowly pulls in over time creating striations on its own. If you're in the US, I can also recommend Craft Resin - you can use this link to save 10% :) go.referralcandy.com/share/G537QB2
Can we make this with acrylic and mica?? Same effect wil com or not
Здравствуйте, скажите пожалуйста это внутри вы насыпали, камушки с эпоксидной смолы? Спасибо!
After how much time you put handles
Скажите пожалуйста это фламастер специально для эпоксидной смолы?
Absolutely gorgeous. I am allergic to latex do you have any other ideas
I have seen people use regular white school glue with success! They cover the back almost completely and the resin doesn't seem to stick to it!
Please what quality marker do you use
Lateks si sürdükten sonra kuruması için verdiğiniz süre ne kadar zaman
Que material es la base en al que está aplicando el material
Is it mica powder that provides this effect? Can the same result be obtained with epoxy pigment?
What kind of resin do you use it is beautifully crystal clear ? A absolutely Beautiful tray 🤩👏
Thank you! 💗 I use EpoxyPlast B20 JewelCast by Dipon. You can use my code ‘SUMMERGIRL’ to save 10% www.dipon.de/
رائع يامبدعه 😍
It is a beautiful and elegant tray! 😍👍🏼 I had the experience with the color in the edges (gold or silver), they pilled or get scratched very easy, do you have the same experience or not??? I’m thinking that maybe doing the edges before the clear top coat, can be a good idea! I’ll try that! By the way thanks for the tip of the latex, I didn’t have idea about that!
Thank you! 🥰 If you’re having issues you could try before the top coat, I add a few layers with the markers so it doesn’t scratch off 😊
Nice work, what’s the name of the marker please?
Did the black edges level out and mix in with the clear center over time or did you have to mix/shake it to cover up that clear area?
Yes the black pigmented resin pulls into the center over time 😊
May I ask in what temperature you let the resin set till the demolding? I have a lot of amine blush every time.😔
Room temperature or slightly higher than room temperature is ideal. Blush could be caused by high humidity levels and can be fixed by adding a top coat 😊
Hey Nadia. Another questions sorry hehe. But what kind of latex is it? I mean is there a specific latex for resin or any latex is okay? And whats the difference between coating / pouring clear resin after demolding and before demolding? Is before demolding easier? I want to learn resin arts so i need more informations. Thank you in advance.
Any liquid latex should be fine! I’ve used a brand ‘meant’ for horror make up and it was the same as any other brand. Top coating out of the mold leaves a nice domed finished, for more info check out my video here: th-cam.com/video/5-VBL4k24ho/w-d-xo.html 😊
How much resin did you use for this mold
Could you please tell me what resin you use for this tray?
Hermoso
How much quantity of resin taken while making this tray
What's the purpose of the latex???
Can you write the dimensions? Thickness. And how much resin was used.
Please share how to get the materials at wholesale rate if possible
Can it break
How much resin did you mixed
🔥🔥🔥🔥🔥🔥😎❤️👍
Mam did u conducting classes for ths
How much price
si può mettere colore acrilico nella resina
Coast ethra
Very sheik!
How much would this cost?
Супер 👍👍
What viscosity resin are u using?
A low viscosity resin 😊 I highly recommend Dipon (located in EU), you can save 10% with my code ‘summergirl’. If you’re located in the U.S, I can highly recommend Craft Resin, you can save 5% with my link: craftresin-us.refr.cc/summergirlcroatia
@@SummerGirlDesigns thank you so much!!!
It's so beautiful
Can you translate to Arabic
I messaged you on etsy for a set I would in specific colors
No answers, too bad!
Beautiful
Magnifique 💗 💗
Lovely tray. Is it not possible to use adhesive tape instead of latex
Thank you! Yes, you can also use adhesive tape, I just find liquid latex to be easier for me 😊
Beautiful