HOW TO TIME A 12 VALVE CUMMINS ( P-7100 PUMP )
ฝัง
- เผยแพร่เมื่อ 23 ก.พ. 2021
- HOW TO TIME A 12 VALVE CUMMINS WITH A P-7100
HOW TO REBUILD 12 VALVE CUMMINS PART 21. Doing the timing !!!!
I did this video to help you guys out on how to set the timing on a your p pump 12v cummins engine ( p7100) i am using the dial gauge setup for timing witch is the way i like to do it as you know what the timing actually is that way
CHECK OUT MY WEBSITE FOR MECH AND PARTS ---- WWW.CUTTERUPROB.COM
WANT to be a patreon ------------ / cutteruprob
also check out my amazon store ----------- www.amazon.com/shop/cutteruprob
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! - ยานยนต์และพาหนะ
![[안방1열 풀캠4K] 베이비몬스터 'FOREVER' (BABYMONSTER FullCam)│@SBS Inkigayo 240707](http://i.ytimg.com/vi/_2HL-ogzzBU/mqdefault.jpg)
Question , In some of your vids you suggest setting the timing at 17* from stock ... My mane inquiry or thought is (pump off) couldn't you slide the dowel pin location flange up or down to preset the new tdc timing for an engine build ? Just trying to simplify my assembly once the engine is back together ...
Your videos are so nice to be able to watch and gain knowledge from , very appreciative of your time taken to make them ...
Definitely interested in the larger fuel lines, at what horsepower level they are needed and all the specifics of banjo bolts, filter housing mods, filter to use etc.
i honeslty not sure at what point it needs to be done. we will find out soon as i have a dyno lol
Thanks
Yes please do the big fuel video
noted
Seems like years ago I heard that the 913 pump or the 215 hp had a different timing or it adds timing at full rack travel some thing like 5 or 6 degrees . My old 95 has a 160 hp pump seems to work ok for me thank I appreciate your videos
Thanks
Would like to see you rebuild the accelerator attachments to the P 7100 for the 1997 Dodge Ram 2500 Cummins motor. Including the attachments spring tabs.
your talking the throttle linkage ?
@@CUTTERUPROB Absolutely. There really is no good video in rebuilding these linkages. I have gone through hoops to correct mine. Some idiot removed the springs and attachments and placed a door spring between the front and rear linkage. I am searching for parts at this time. The difficulty was the truck would not idle without keeping your foot on the pedal. Would enjoy your input. By the way Cummins or Dodge designed the front accelerator unit with a thin plastic bearing; i have replaced this bearing with a part manufactured by Igus , part no GFI 0506-8 at $2.70 per unit (requires two) and appears to be better material. When disassembled the factory bearing was worn through and there was metal on metal. After repair, the real issue is adjusting the unit and how to? Appears to be many options. Your thoughts. Everyone with this linkage has the same problem and no one is addressing the issue. This will affect Dodge Ram diesel trucks from 94 through mid 98. Keep up the good work; as a comment about your videos please smile more often, after all we are having fun, yes?
I have a 98 12 valve just bought, going through paperwork on it, I am having issue with acceleration hesitation and popping filters where black and plugged. Looks to be a built motor, where do I go next coolant still full and drove it over 100 miles. Changed oil and no signs of head gasket issue.
I have a quick question I have a 98 12 valve Cummins and I did a tapping cover on it and the pump and the engine was on TDI when I put it back together I tightened down the pump gear 150 foot pounds foot and drove it more than 4miles and my truck was back fine and pulling white and gray smoke in. I timed it again and it ran just fine then it slipped timed again any ideas?
You should try out PDD adjustable timing gear for ppump and front case
i buy different ones. but i use them in all my trucks
@@CUTTERUPROB awesome I like the company they are all good people there
Have a link where to get a p pump timing tool? The one to measure plunger lift.
this is one's a put together years ago. but i i am working on doing a batch
You mentioned having the timing tab replaced inside the pump. Do you have a test stand?
i don't but its on the list
What keeps the plastic timing pin from coming out the back ?
Should have a metal retainer. But if that’s missing you can put a small amount of rtv on it on the outside will hold it in
You say you like 18ish for a light performance driver. What would you time one at for a street truck that dont tow?
16-18 depends in the mods done to the engine
@@CUTTERUPROB what about for a truck used to tow?
Of the engine is in the truck, can you still turn it back without trouble? Good video by the way! All the videos I've see just have ppl talking and pointing but now that I've seen I can understand better how it works.
yep sure can and Thanks
Do you have a thou lift to timing chart ?
If you google it it should come out
Found one thank you
I have 12 valves Cummis she start and die u ting is the pump ?
Can be a bunch of stuff