*Parts and Tools* This channel earns a small commission using some of these links - at no additional cost to you. Milwaukee Impact Wrench: amzn.to/2ZGeSKE Genuine Toyota Front Brake Pads 04465-AZ006-TM: amzn.to/2NHFGnt Brake Lubricant: amzn.to/2MMwNcH 3M Silicone Paste: amzn.to/2ZIuN7o Brake Pad Spreader: amzn.to/2LiCH21 The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive
Hey Big Dog , one minor detail , if you don't mind.. The hardware clips appear to be original OE , based on their brass looking color. Most aftermarket hardware resemble stainless steel. The upper and lower clips are different and so placement is "somewhat" important. The lower of the two clips has a flat base in which the end of pad sits and rides on.The upper clip has a base with a mild "V" shape . Your installation was correctly done! As to why the mild V shape I can only assume that it creates a tight fit of the pads and may prevent the pads from rattling.. FWIW most after market clips have bases that are flat. Nice video by the way. Cheers
By the way very good explanations during the process. Excellent video. Probably because it’s branch specific. I do like the idea of OEM brakes from Toyota.
Since you did just one side, are there any differences if I'm going to do both? For example, should I pump the brakes in between doing the left and the right so that I don't push double the brake fluid up into the reservoir?
Thanks for your video which shows you putting a thin coat of lubricant on the back of the brake pad before snapping on the metal shim. I just bought pads which have a metal shim glued to the pad. My metal shim has 4 tangs bent around the edges of the pad so that if the adhesive fails, the shim is still mechanically held in place. This shim also has a textured coating of nitrile rubber on the outer surface. Your video would suggest that I should apply a coating of lubricant onto the surface of the textured nitrile rubber. I am wondering in a second thin plate of metal is added on top of my shim or does the lubricated, textured, rubber surface of my shim directly touch the caliper piston? Thanks for any suggestion.
Be sure to subscribe for more tool and car repair videos! th-cam.com/users/BigDog50001 twitter.com/BigDog50001 instagram.com/bigdog50001/ Disclosure: This channel earns a small commission using some of these links - at no additional cost to you. The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive
Good vid man! Can a guy use anti sneeze instead of that purple stuff you were using? Also, what are those clips called? I think I’m going to replace them regardless Thanks!
one interesting question, On Honda, you got sliding pin with bush on top, whereas in toyota you got sliding pin with bush on bottom. What I understand is sliding pin with bush should be always on trailing pin, which is right on toyota but not on honda, in honda it has sliding pin with bush on leading side which is on top. Do you have any view. you told me sliding pin with bush will be always on top for front both side and in bottom for rear in honda.. any thoughts.
Specs and locations can be different from manufacturer to manufacturer, model to model and even year to year. When it comes to sliding pins I usually only remove one at a time to avoid mixing them up. That being said, I will usually check service info on locations to verify correct placement, because there have been instances where the factory put them in wrong. And I try not to use the word "always" when it comes to auto repair lol.
I have a rusty old 2005 Sienna, I removed that bottom bolt on the caliper, but the caliper won't budge. I can't lift it like in your video. Any idea on how to get it to move?
New pads and rotors Wagner thermo quiet and what they call premium rotors on 13 Sienna. Everything is good. At stop when slowly release pedal there’s a slight “crunch” sound like I can here the calipers releasing. Anything I can do to stop that? Thanks
What did you say at the very end? I couldn't understand .. "short something process to make sure the pads... " Thanks. Very clear video otherwise. I've had my breaks done twice by mechanics and they still squeak. So I'm going to give it a try myself.
I spoke with several people and they all said that they have to pry the pads away from the rotor to get the caliper bracket loose enough to lift like you did. I am totally new to this, and the bracket wouldn't even budge, and I couldn't figure out why, because your video shows you effortlessly lift it up. It would be helpful if you as least explained to people what to do to get it lifted. I ended up having to pack everything up and put the wheels back on to try for another day since it took to long trying to figure this out, and it was getting to dark, cold, and rainy.
I didn't hide anything in this video, and obviously you don't ALWAYS need to pry the caliper up because I didn't need to in this video but sometimes you do. I wish I could think of every scenario when doing videos but that is impossible. I am glad you figured it out. Sometimes working on cars (or anything) means you have to improvise, adapt and overcome.
hey big dog are those jack stands the 3 ton jacks from harbor freight tools? i have a 2004 sienna and i bought the 3 tons jacks from harbor freight tool and i know that where you put your jack stands thats the right place for the regular car jack since it has the cut out in the middle of it , so that it does not touch or bend the part that you showed on the video on where to place them. i think that if i place the jacks stands where you show its going to bend it since its too thin to support the car's weight. were your jacks touching the thin vertical part sticking down? thank you in advance!
alfre sua Those are the pinch welds and the sections I pointed out are designed to hold the weight of the vehicle. They usually only bend if you try and lift one side of the vehicle instead of both sides at the same time like I showed in video. I have several sets of jacks stands and I do believe the ones in the video are from HF.
I bought rubber adapters that fit on these jack stands. You simply press them in place on top of the stand. They are grooved so the pinch welds sit in the grooves. No surface damage to jack points at all.
Yes, typically the rear disc brakes can be a bit more work. They don't all have rear disc brakes though, the vehicle in this video had rear drum brakes.
Possible causes that come to mind: crappy aftermarket pads missing/misaligned shims (this is what the problem on this vehicle was) poor/no brake grease on backs of pads/shims
*Parts and Tools*
This channel earns a small commission using some of these links - at no additional cost to you.
Milwaukee Impact Wrench: amzn.to/2ZGeSKE
Genuine Toyota Front Brake Pads 04465-AZ006-TM: amzn.to/2NHFGnt
Brake Lubricant: amzn.to/2MMwNcH
3M Silicone Paste: amzn.to/2ZIuN7o
Brake Pad Spreader: amzn.to/2LiCH21
The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive
I like that you show jacking points. Too many videos do not show. Thank you
graeme1957 Thank you for the comment, I try to be thorough!
Probably the best repair video on youtube.
Thanks 👍!
Thank you easy straight forward instructions no nonsense or time waisted, perfect 👌🏼
Thanks for the comment!
this video was very informative unlike most of the garbage out there you are a very professional mechanic. thanks for the info.
Thanks for the comment, I appreciate it!
Thank you for the detailed information. The torque specifications are especially appreciated! Great video!
very professional job, thanks, you just saved me at least $150, thanks again...
Glad it helped, thanks!
Hey Big Dog , one minor detail , if you don't mind.. The hardware clips appear to be original OE , based on their brass looking color. Most aftermarket hardware resemble stainless steel. The upper and lower clips are different and so placement is "somewhat" important. The lower of the two clips has a flat base in which the end of pad sits and rides on.The upper clip has a base with a mild "V" shape . Your installation was correctly done! As to why the mild V shape I can only assume that it creates a tight fit of the pads and may prevent the pads from rattling.. FWIW most after market clips have bases that are flat. Nice video by the way. Cheers
Really appreciate the help You made this look really easy. Very clear instructions!
Excellent job showing and explaining. Thank you!
Thanks 👍!
Excellent technique! I especially like only having to remove one bolt from the caliper.
This helped me change my break pads flawlessly. Thanks a bunch for uploading this.
Glad it helped!
Very professional presentation , thank You so much !
I appreciate the comment, thanks!
By the way very good explanations during the process. Excellent video. Probably because it’s branch specific. I do like the idea of OEM brakes from Toyota.
Thanks 👍!
Awesome video! Very well explained.
Since you did just one side, are there any differences if I'm going to do both? For example, should I pump the brakes in between doing the left and the right so that I don't push double the brake fluid up into the reservoir?
Nice video... Thank. Now I could do it in my Sienna 2006.
Thanks 👍!
Thanks for that run through..
Thanks for the comment!
Thanks for your video which shows you putting a thin coat of lubricant on the back of the brake pad before snapping on the metal shim. I just bought pads which have a metal shim glued to the pad. My metal shim has 4 tangs bent around the edges of the pad so that if the adhesive fails, the shim is still mechanically held in place. This shim also has a textured coating of nitrile rubber on the outer surface. Your video would suggest that I should apply a coating of lubricant onto the surface of the textured nitrile rubber. I am wondering in a second thin plate of metal is added on top of my shim or does the lubricated, textured, rubber surface of my shim directly touch the caliper piston? Thanks for any suggestion.
a lot of good points and very helpful. Thank you
Thank you.
Be sure to subscribe for more tool and car repair videos!
th-cam.com/users/BigDog50001
twitter.com/BigDog50001
instagram.com/bigdog50001/
Disclosure: This channel earns a small commission using some of these links - at no additional cost to you.
The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive
Bob Ross of brakes. Maybe brothers sound alike
Good vid man! Can a guy use anti sneeze instead of that purple stuff you were using?
Also, what are those clips called? I think I’m going to replace them regardless
Thanks!
Todo un Genio gracias por compartir, ya no pagaré los $50 que me cobran por cambiarlos.
Bro thank you for sharing your video helped save my family 500$ bucks
No problem 👍!
Thank you buddy, it’s exactly
No problem 👍!
Great video as always
Thanks!
Thank for your video
Glad to help.
Thank you great video presentation
I appreciate the comment, thanks!
Very helpful, thank you.
Thanks for the comment!
Nice Work ....thanks
Thank you for the comment.
Thanks for sharing bro!
I appreciate the comment, thanks!
Thank you for the video sir
👍
Super excellent job
Thanks 👍!
Thank you so much
one interesting question, On Honda, you got sliding pin with bush on top, whereas in toyota you got sliding pin with bush on bottom. What I understand is sliding pin with bush should be always on trailing pin, which is right on toyota but not on honda, in honda it has sliding pin with bush on leading side which is on top. Do you have any view. you told me sliding pin with bush will be always on top for front both side and in bottom for rear in honda.. any thoughts.
Specs and locations can be different from manufacturer to manufacturer, model to model and even year to year. When it comes to sliding pins I usually only remove one at a time to avoid mixing them up. That being said, I will usually check service info on locations to verify correct placement, because there have been instances where the factory put them in wrong. And I try not to use the word "always" when it comes to auto repair lol.
I have a rusty old 2005 Sienna, I removed that bottom bolt on the caliper, but the caliper won't budge. I can't lift it like in your video. Any idea on how to get it to move?
I guess you had to remove both bolts
New pads and rotors Wagner thermo quiet and what they call premium rotors on 13 Sienna. Everything is good. At stop when slowly release pedal there’s a slight “crunch” sound like I can here the calipers releasing. Anything I can do to stop that? Thanks
What did you say at the very end? I couldn't understand .. "short something process to make sure the pads... " Thanks. Very clear video otherwise. I've had my breaks done twice by mechanics and they still squeak. So I'm going to give it a try myself.
A short "bed in" process, to mate the pads to the rotors.
I spoke with several people and they all said that they have to pry the pads away from the rotor to get the caliper bracket loose enough to lift like you did. I am totally new to this, and the bracket wouldn't even budge, and I couldn't figure out why, because your video shows you effortlessly lift it up. It would be helpful if you as least explained to people what to do to get it lifted. I ended up having to pack everything up and put the wheels back on to try for another day since it took to long trying to figure this out, and it was getting to dark, cold, and rainy.
I didn't hide anything in this video, and obviously you don't ALWAYS need to pry the caliper up because I didn't need to in this video but sometimes you do. I wish I could think of every scenario when doing videos but that is impossible. I am glad you figured it out. Sometimes working on cars (or anything) means you have to improvise, adapt and overcome.
Nice vid bro! Question, how to you like your Sienna? Good car?
Not my vehicle but it seems to be a good reliable van. Thanks for the comment!
hey big dog are those jack stands the 3 ton jacks from harbor freight tools? i have a 2004 sienna and i bought the 3 tons jacks from harbor freight tool and i know that where you put your jack stands thats the right place for the regular car jack since it has the cut out in the middle of it , so that it does not touch or bend the part that you showed on the video on where to place them. i think that if i place the jacks stands where you show its going to bend it since its too thin to support the car's weight. were your jacks touching the thin vertical part sticking down?
thank you in advance!
alfre sua Those are the pinch welds and the sections I pointed out are designed to hold the weight of the vehicle. They usually only bend if you try and lift one side of the vehicle instead of both sides at the same time like I showed in video. I have several sets of jacks stands and I do believe the ones in the video are from HF.
I bought rubber adapters that fit on these jack stands. You simply press them in place on top of the stand. They are grooved so the pinch welds sit in the grooves. No surface damage to jack points at all.
thx so much dude
Thank you
👍
很好👍
I don't see you install/attach wear indicator to the pads
Instead of a torque wrench for the lug nuts, would you recommend using an 80 ft. lbs torque limiting bar and call it a day?
What are torque limiting bars.
@@francisniestemski2440 they attach to your impact wrench and flex when a torque limit is reached, resisting further tightening of the fastener.
What kind of a torque wrench are you using?
I think I used a cheap Harbor Freight torque wrench in this video. Now I pretty much only use my Snap-On digital torque wrenches.
What about the rear disc. I know they are more complicated because of the emergency brake.
Yes, typically the rear disc brakes can be a bit more work. They don't all have rear disc brakes though, the vehicle in this video had rear drum brakes.
👍👍👍
Thanks!
درود بر شما متشکرم اقا
👍
خواهش میکنم
Why mine squeekes after changing the brake pads?
Possible causes that come to mind:
crappy aftermarket pads
missing/misaligned shims (this is what the problem on this vehicle was)
poor/no brake grease on backs of pads/shims
Q numero de copa se usa para soltar el tornillo del caliper
You only did one side, toyotas have brakes on both sides of the front wheels, driver and passenger.
I only RECORDED one side....
@@BigDog50001 lol