CR10s Pro V2 All Metal Micro Swiss Upgrade with Direct Drive
ฝัง
- เผยแพร่เมื่อ 25 ก.ย. 2021
- I decided to upgrade to an all-metal-hotend with direct drive.
It involved modifying the fan casing I got from thingiverse to suit my machine since the original uses v1 sensor.
Although it works well, I still need to figure out how adjust the nozzle location back to the middle of the bed. Hopefully, some of you may have some experience and suggest some in the comments.
Update:
Link to the modified part: www.thingiverse.com/thing:514...
Link to fan duct: www.thingiverse.com/thing:515...
Found a vid with a solution for the x and y offsets.
Explained in detail.
• CR10S PRO V2 Tiny Mach...
MP3 tracks:
Sunday Rain by Cheel
Brooklyn and the bridge by Nico Staf
Sunny Travel by Nico Staf
Great post and printed the files as preparation for my Microswiss DD upgrade. Question however is how did you mount the fan duct to the fan shroud? Not very clear for me. Appreciate your answer.
Fan duct mounted by two screws. Used inserts to hold them better.
@@webslinger2011 thank you. But in have no screw holes in the fan shroud print. How did you resolve this? Did you drill them?
I wonder if the sprite is a direct replacement now
Great video, the million dollar question it worth it?
If you're sticking with a bedslinger. Absolutely! Moved on to building DIY CoreXY printer. I now have complete control over my printer.
Do you have a link to the STL for the final mount you used?
Just uploaded to thingiverse: See if you can download the file. www.thingiverse.com/thing:5147868
@@webslinger2011 Yes, I can. Thank you very much!
@@webslinger2011 have you got the red fan duct STL please?
@@marksneyd1262 Updated the link in the description. Note that the vent needs to be shortened. An easy fix.
Did you use the cr-10s pro hotend or the cr-10/ender one ?
Originally had the creality cr10s pro v2 hotend. Replaced it with the micro swiss all-metal-hotend.
@@webslinger2011 Sorry if I was unclear, I meant was it the cr-10s Pro microswiss or the cr-10/ender microswiss, seeing that the pro has a separate version of it.
@@Steel_shooter It says CR10/Ender from the local supplier.
@@webslinger2011 thank you, I have the slightly longer CR-10s pro version, so I am really struggling to find a good fan setup
@@Steel_shooter Made a custom single fan duct posted on thingiverse.
8mm off center? Thats a lot. How did you fix that in the firmware?
Fixed when I did the probe offset.
What parts and where did you buy. I'm trying to kill two birds with one stone by getting a kit like this where I repurpose my existing drive motor and getting an all-metal hotend. I want to save money but still want a direct drive setup, because I'm suffering from clogs and jamming on my CR10s Pro V2 all the time. Please advise.
Bought from a local supplier on shopee Singapore.
anyone have an issue where bl touch is now sitting too high and won't make contact?
Likely a probe malfunction. Usually replacing the bl pin fixes it. Post a video on creality fb forums to see what's happening.
Auriez-vous le lien de la pièce rouge à la sortie de l’extrudeur pour tenir le tube
Updated the link in the description. Download the file from thingiverse.
Does the Extruder Motor not turned reverse?
Nope. Didn't need to do anything. It's still the same.
@@webslinger2011 can't understand it because the original extruder gear spins counter clockwise and for the Extruder of the micro swiss needs clockwise direction.....maybe the Cable switch poles? Or have U a better explanation?
@@Martin-zd8eb Mine came with the extender cable. It seems the wires 2 and 4 were switched(counting from the left as viewed from the back of the motor).