1986 Johnson Evinrude 15hp/9.9hp outboard Water Pump Impeller Replacement
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Mid to late 80's model Johnson Evinrude 15hp/9.9hp outboard motor water pump impeller replacement. This model is a 1986.
Impeller / water pump kit amzn.to/3SaeuiK (Amazon)
Thermostat amzn.to/3tMJKu0 (Amazon)
Just done the water pump kit on mine but now I have to do thermostat
Thanks bro!
When i pulled the water pump up , i pulled the shaft out of lower unit. How do you reinsert the shaft
This video shows you how to reinsert the shaft. You will have to take the water pump off to refit the key way (woodruff key). I hope you haven't lost the key way when it came out?
Thanks for the help. i
I got the waterpump installed and lower unit re attached to the motor. Thanks again for your help
where does the tiny o ring go?
Good question. I forgot to mention it in the video, and you can't quite see it. It goes on the top of the drive shaft. Once the impeller housing is back on, you slip the oring on the end of the shaft. There is a small groove that it will locate in.
@@glennosgarage do you know what that o ring does?
can you tell me the dimensions of the propeller.
I need the dimensions to be able to buy the propeller
Thanks help
No I can't sorry. I have since sold this outboard. You should be able to find a part number easily at marineengine.com
I got stuck with removing nut inside the unit. It cannot be unscrew. It is turning but not going out. Any suggestion?
I'm not sure what part you're referring to. Do you mean the small bolt that's connected to the shift rod via a brass connector?
@@glennosgarage yes, that's one. In a meantime, I managed to remove the leg, but this bolt is still there, unable to screw on unscrew, I guess the drill has to put on work
@firstlast1995 if the threads have stripped in the brass piece you may have to replace the brass connector. Good luck 👍🏽