Thanks SO MUCH for putting these videos together. Using these videos as guides, I was able to open up my AX4 from my 1988 Comanche and perform an inspection. Good news, it seems a rebuild is not needed! Also, you mentioned you have never seen a retaining clip under the 12mm bolt on the shifting arm --- mine did have the clip! Thanks again
Thanks SO MUCH for putting these videos together. Using these videos as guides, I was able to open up my AX4 from my 1988 Comanche and perform an inspection. Good news, it seems a rebuild is not needed! Also, you mentioned you have never seen a retaining clip under the 12mm bolt on the shifting arm --- mine did have the clip! Thanks again
How do I get the rest of the re ud video's
Rebuild videos
Aside from the obvious, are the 2WD and 4WD versions the same?
I do not know for sure, but I would expect the internals to be the same or very similar.
Did you clean the outside first, cause sure is clean!
Thanks for the comment.
Yes. Pressure washer, degreaser, and some scrub brushes being very careful not to get water where it should not be....
Alguien q me diga el tipo de orquilla de desenbrague de esta caja