Logitech G29 Sticking Pedal Fix - The Quick(ish) way

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ธ.ค. 2024

ความคิดเห็น • 53

  • @crazylegssw
    @crazylegssw ปีที่แล้ว +12

    You have no idea how much time, energy, and money I wasted only to have finally seen this video. THANK YOU MATE!

    • @HamVR
      @HamVR  ปีที่แล้ว

      LOL. Glad it helped 😁 👍

  • @checkevolution20
    @checkevolution20 ปีที่แล้ว +4

    Bless up, fixed for me too. Been just dealing with it for months even after watching the video because it seemed like such a hassle. Spent less than $15 total, took me less than an hour and a half from start to finish. Thanks so much

  • @Vincent-_-123
    @Vincent-_-123 ปีที่แล้ว +3

    Thank you very much! I was about to buy new pedals because I thought there was no repair for my problem but then I saw you video and decided to try it. Now they work again and I feel like I owe you the 60 - 70 Euros I would have spend without this video.

    • @HamVR
      @HamVR  ปีที่แล้ว +2

      Glad it helped 👍

  • @Flymonster0953
    @Flymonster0953 หลายเดือนก่อน +1

    Thank you so much for the video, didn't have contact cleaner so I used brake cleaner, but now it works perfectly

  • @jeroenvandenbroeck7991
    @jeroenvandenbroeck7991 4 หลายเดือนก่อน +1

    Worked like a charm!

    • @jeroenvandenbroeck7991
      @jeroenvandenbroeck7991 4 หลายเดือนก่อน

      Can joystick drift on the ps5 controller be fixed in the same way?

    • @HamVR
      @HamVR  3 หลายเดือนก่อน

      To some extent yes. Just make sure your device is out of warranty before doing it, otherwise get a replacement under warranty.

  • @gus_8368
    @gus_8368 2 ปีที่แล้ว +4

    Thanks, I did the steps of the video and it worked.

    • @HamVR
      @HamVR  2 ปีที่แล้ว

      Glad it helped

  • @ICU2CCTV
    @ICU2CCTV 2 ปีที่แล้ว +3

    Brilliant, Did all that and problem solved, Cheers :-)
    (I did replace the screws under the gripper though, and seen as it was all exposed I added a rubber cube into to the Brake spring; i'm loving the new brake). Thanks again 👍

    • @HamVR
      @HamVR  2 ปีที่แล้ว

      Nice and great work on the brake mod!

  • @HamVR
    @HamVR  3 ปีที่แล้ว +2

    Help the channel - Use my Amazon UK Affiliate Link to buy Electrical Contact Cleaner 👍
    amzn.to/31fKRnU

  • @SalsaKetchup
    @SalsaKetchup 3 ปีที่แล้ว +4

    Well done, I was wondering when you would get to the screews under the carpit gripper that are a 'really someone thought putting more screews there will be fun' moment.

    • @HamVR
      @HamVR  3 ปีที่แล้ว +2

      Haha indeed, I think they over engineered the screw design LOL.

    • @banan33033
      @banan33033 2 ปีที่แล้ว

      @@HamVR fr

  • @vanwylde9993
    @vanwylde9993 2 ปีที่แล้ว +2

    Thx & Cheerz from Oz.

  • @CroArmor
    @CroArmor 2 ปีที่แล้ว +3

    You said 2.5mn key for pedals but it doesn't fit for me, and 2mm is too small.
    Really don't know what is happening and why it won't go with 2.5 size.
    I have problem with losing power on throttle.

  • @TurtleNadereal
    @TurtleNadereal ปีที่แล้ว +3

    To anybody with this problem, don't hesitate to try it.. after dealing with this dogshit problem for 2 months after trying everything wd-40 trick really did it

  • @abdul1092
    @abdul1092 11 หลายเดือนก่อน +1

    When I plug my g923 into g hub it shows that all pedals are being pressed and I’m not pressing them, u know how to fix?

  • @wanderlyy
    @wanderlyy 2 ปีที่แล้ว +4

    thank you so much for this just fixed mine ! 💚👽

  • @LeonX29
    @LeonX29 7 หลายเดือนก่อน

    It may or may not be an issue that my WD-40 had its expiration date about 8 years ago.. (there was some dust and unaligments in the cogwheels and i've confirmed that the remainder of my missing brake power is in the potentiometer)

  • @markoatf5121
    @markoatf5121 2 ปีที่แล้ว +2

    so I got problem with g923 for ps4...and on gt7 throttle jumps between 90% to 100%( not all the time ) when pressed at maximum...
    is that a problem solving for that?

    • @HamVR
      @HamVR  2 ปีที่แล้ว +1

      It could be a sticky potentiometer on the accelerator pedal, so this method might help too.

    • @markoatf5121
      @markoatf5121 2 ปีที่แล้ว +1

      @@HamVR it did...I pressed the shit out of wd40 cleaner 🤣🤣🤣🤣🤣🤣

    • @superserdoencanal9009
      @superserdoencanal9009 ปีที่แล้ว

      That’s a dirty potentiometer, I fixed mine with the all time fix for potentiometers, a bit of Kontakt spray

  • @CrasyFingers
    @CrasyFingers 2 ปีที่แล้ว +2

    my issue is the gas pedal sometimes doesn't go all the way sometimes it wiggles from 90% to 100%, will this video also fix this?

  • @blainewing1010
    @blainewing1010 2 ปีที่แล้ว +4

    What is that app you used to see the pressure on the pedal and test it works ok?

    • @HamVR
      @HamVR  2 ปีที่แล้ว

      The standard Logitech G Hub Software
      www.logitechg.com/en-gb/innovation/g-hub.html

    • @blainewing1010
      @blainewing1010 2 ปีที่แล้ว

      @@HamVR thanks a lot 👍

  • @spiralyguy
    @spiralyguy 11 หลายเดือนก่อน

    You are the dude!

  • @FitGuy16
    @FitGuy16 2 ปีที่แล้ว +3

    Thanks a lot sir. Problem solved and i am faster at least 0.5 sec per lap :).

  • @deffloyd
    @deffloyd 3 ปีที่แล้ว +2

    Good stuff

  • @ltsRewind
    @ltsRewind ปีที่แล้ว +1

    Having this issue with brand new pedals… is this beyond expectations or just bits of dust etc as I’ve read? Usually over a couple of years this starts happening so I’m a bit confused

    • @HamVR
      @HamVR  ปีที่แล้ว +2

      I would not expect brand new pedals to have this problem. You might have a faulty potentiometer, in which case I would return rather than try to fix yourself.

  • @randommicrowave3917
    @randommicrowave3917 ปีที่แล้ว +1

    THANK YOU

  • @popastefan1439
    @popastefan1439 11 หลายเดือนก่อน +1

    it works with compressed air spray?

    • @HamVR
      @HamVR  11 หลายเดือนก่อน +2

      It's contact cleaner which will clean the potentiometer contacts better than just air blowing allowing.

    • @popastefan1439
      @popastefan1439 11 หลายเดือนก่อน

      Thx@@HamVR

  • @Brandjum
    @Brandjum ปีที่แล้ว

    what screwdriver did u use for the silver screws? those are a nightmare

  • @blo0phs
    @blo0phs 6 หลายเดือนก่อน

    Is it work with normal WD-40?

    • @HamVR
      @HamVR  6 หลายเดือนก่อน

      Possibly but not as well. This stuff cleans and regular WD40 is a lubricant.

  • @JosephThompson-x5h
    @JosephThompson-x5h 11 หลายเดือนก่อน

    mine doesnt stick it just keeps going.

  • @Delayeed9
    @Delayeed9 2 ปีที่แล้ว +1

    "HEADSHOT!"

  • @banan33033
    @banan33033 2 ปีที่แล้ว

    i sitll have the sticking problem after doing this

    • @HamVR
      @HamVR  2 ปีที่แล้ว +1

      Might be time to strip or replace the potentiometer completely.

    • @banan33033
      @banan33033 2 ปีที่แล้ว

      @@HamVR nut it worked yesterday perfectly isdk how ity broke in 1 dayy

    • @banan33033
      @banan33033 2 ปีที่แล้ว

      but

    • @juanin1556
      @juanin1556 ปีที่แล้ว

      @@banan33033 what did you do ?

  • @ransomsdp
    @ransomsdp 2 ปีที่แล้ว

    How is this quick

    • @HamVR
      @HamVR  2 ปีที่แล้ว +4

      It's quicker than stripping down and/or replacing the potentiometer but slower adding newer pedals to cart. Quickish.