Bone stock Husqvarna 350 - HUGE GAINS from custom muffler / pipe. Also, oil pump drive gear info
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- This muffler/pipe design is by no means something I came up with. Go check out Buckin'
/ buckinbillyraysmith
if you want to see more of these whacky mufflers that his close friend Bearclaw designed.
When I see and experience something that works & WORKS WELL, you better believe I'm going to incorporate it into my life. These things flat out work! No denying it. Anyone can build one, just takes a little time and patience is all.
These saws respond very well to most any muffler mods, in general, but the gains with this particular one are very impressive.
much respect for mentioning buckins channel and bearclaws original design of this muffler brother.
I have a 350 that I have been building for the last half year. I opened the exhaust and intake right up. I don't have timing numbers but I raised exhaust and lowered intake by about 1mm. Didn't touch the transfers as I was unsure about doing a nice job grinding them. I essentially did a base gasket delete by honing cylinder down till piston wouldn't cycle thought the cylinder. Then I added a new gasket. Once again don't have the squish haha. I've just got a 359 carb in the post today and found your vid seeing if anyone else has done 350s. Can't wait to put carb on. Last thing to do will be a muffler, maybe claw like yours as it works so well!
How did your project turn out?
Love that muffler! I gotta try that! Thanks for sharing! Glad your channel is growing! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
WOW JUST WOW. Nice work brother. Those are huge gains on a stock saw or a ported saw either way that's impressive. Don't you worry about paint or shine. Function over fashion every time. Plenty of fashion though I must say. You rock brother. Thank you for this great video. 🌲❤🌲👊🪓
I got one of these that would run great for a few minutes and then die. Found the hole for the tank vent was never actually drilled through. Works perfect after I fixed that.
Good work! That's random for sure. Things DO get missed at the factory....... more often than some may think. Good catch!!
That would be one that would take a bit to catch onto I imagine
@@samishsawworks5870 one of my various jobs was a brief stint as a repair technician at a factory service center for a major brand of power tools. I'm very aware of how things can be missed at the factory.
@@samishsawworks5870 The fella I bought the saw from was selling off a bunch of his father's stuff that he left when he passed away. He didn't know much about that saw but he knew his dad bought it years ago and never really used it. So he took it to a shop, had the carb rebuilt and fuel lines changed. It didn't run right so he took it in again and they rebuilt the carb again under warranty. He gave me the paperwork for all of it. When I used it the first time it ran well until it died. Open the fuel cap and you could hear the air rush in. Removed the tank vent and couldn't blow air into the tank. Drilled a tiny hole down inside and it works perfect. Then I did a timing advance, base gasket delete, muffler mod, and its a screamer.
@@crazykincardineite Now that's a first hand experience most won't get to be a part of. Pretty cool!
Not only does it sound awesome with that pipe but it apparently rocks with it. Nice vid!
Impressive! Great video. Your channel is my favorite channel...And that's saying something 'cause I have one myself and I'm a bit narcissistic!
Haha. Thanks bud! I appreciate that. I get a kick out of your channel too! I'm a light hearted guy, so your's suits me perfectly ;)
Now this is a dog gone great vid. You spent a lot of time filming and editing. Thanks.
I tried changing the clutch to a rim style on my 350 in December and nothing fit. Worst of all the bearing was too big for the crank and the old bearing was too small for the new clutch cup.
By your results I will do better for a muffler.
The most informative youtube channel, bar none!
Thanks
That new exhaust sounds really good 👍🏼
Kinda like most things performance....... there is always a side effect/trade-off. With this it's noise, but it's a side effect I don't mind ;)
Huge gains! Very impressive! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
I like the tractor tire in the background. Classy.
The guy before you just loved sealing every thing up!!!
Obtain a 346 OEM cyl and piston kit.Saw will run like a 346xp. Very responsive and makes usable torque somehow.
A previous owner probably came close to smashing that saw with a splitting maul.
Thanks
I just came over from TazMan's channel:) Amazing muffler design!!!
Hey there, welcome! Ol' Taz-Man, he's a good fellow 😊 I didn't design it myself, just built it. BuckinBillyRaySmith runs them on his saws. I just took an already proven design and ran with it a bit ;) Regardless, they do work well!
Thats seriously impressive, i might have to weld one of those up for myself.
Sounds better and seems to cut pretty good
Thanks mate your the bloody AYATOLLAH of rocken Rolla your tips gold so God bless you and all you good American people. Bloody good show mate on ya mate
Great comparison vid man 👍🏻
That’s the wall-e muffler!
It is indeed! Haha
Time to fire up the welder and make one for my 353, nice work has to be seen to be believed thanks alot for sharing just about to sub.
Had one of those it was good when new . Muffler issues wouldnt stay tight chain oiler gear always wearing out poor designed saw with plastic crankcase . Your mod sounds great though
Would their be a similar gain putting a modified muffler set up on a Husqvarna 440 chainsaw?
Those 350 series saws all had issues with those plastic intake clamps
Yeah, I can't believe Husqvarna never made it a factory recall for all of the the small to mid sized 3 series saws with this clamp.
I work on probably ten or more those and the jonsered a year
Nice video!
Is there a video on who you built the muffler?
Awesome video
Thanks
I have a stock Husqvarna 350. Can I buy one of those muffler modifications?
Can those mufflers be bought anywhere?
Built a fuw big bore .
Do you by chance sell those mufflers?
Is that saw stock or bone stock ?
Definitely a lot more gain then stock!
Another common issues with those 350 series saws
Badass.
It's pretty fun for a "stock" 50ish cc saw
Seal bolts to
Is this your go to saw for cutting firewood, reason I am asking is this is the same saw, my 12 old granddaughter limbs tree's with ,16" bar, call's it her girly saw.
That's awesome she's started at a young age! Too many kids are missing that in life. Good for her! My go to firewood saw depending on size of wood is either a ported 372xp with 32" bar or a ported 359 with 24" bar.
But with pipe won't worn the engine faster?
I have a husky 350. Which brand blade & chains do you recommend? I have an old 18 bar but was thinking of going to a 20” setup. Thanks for a reply
I really like the lightweight bars for these saws. My favorite the Tsumura reduced weight bars. The Sugihara bars are very nice too, just comes down to price and availability. The metal on these bars seems to be of much higher quality and holds up much better & longer than the factory bars. Any bar with a K095 mount will fit. I feel the 350, with a smart operator, will pull a 20" bar all day long.
Not sure if you are running 3/8 or .325 pitch chain, but my favorite brand is stihl 33RS (33RSF is the skip tooth version) full chisel chain. I run it on everything.
@@samishsawworks5870
I should’ve mentioned that it’s .325 .050 72 on my current 18” bar setup
@@johnforsyth8414.325 pitch is a great size chain for those saws.
Sugihara makes a .325 pitch 20" bar. If you don't want to spend that kind of money, the Oregon power match bars are a great aftermarket replacement or a stock husqvarna bar is just fine too. For .325 chain I like the Stihl 23RS chain.
I run a 20 inch on mine no problem.
Do you have a link wher i Can by this pipe😊
My 353 rips with pipe on it
I replace the intake boot and reseal them up and send them
Too many of these saws died an early death from loose intake boots
I used to hoard this chassis like there was no tomorrow. Now I only get them if they come with the toolless top cover without the primer bulb.
Swaps in 357xp off camera... yep muffler gained me 2hp hahaha
😄 Haha, good call 😉
A 357xp / 359 With this style muffler runs circles around this 350.
I might just have to steal that idea and swap a 350 decal onto my ported 359 just to mess with people ;)
Samish Saw Works glad there are other saw enthusiasts out there who can appreciate my otherwise lame joke
@@team_1j_jont-179 I got a good chuckle out of it!!
Did you send this to buckin looks just like one he had
Need to have joe dyno one
I'll have to hit him up and see what models he has for testing.
Hey what size Sugi bar are you running there?
24" - 3/8 pitch .050 gauge - K095 mount
【from HIPA】Would you like to test my parts now?thanks
Would you build a muffler for a 372 ?
372XP OE? (Non X-torq?) … I’m about to make one for my saw. 😎
Is there any way I can get up with you about building one ?
Asking a lot from a 50cc homeowners saw. That's a lot of chain to spin. Personally I think those mufflers make more noise than power.
350 is not a home owner saw.
man, i wish you could make me one of those mufflers for my 372xp that would be so sweet. sadly, i don't have a welder so i can't make one
I’m about to build one for my 2001 372XP OE, if you seriously want one let me know. Used to build rollcages so the metalwork for one is very simple.
@@WildAcresFarms oh man if you really wanted to I would love one for my 372xp or 362xp! how much money would you want for one?
@@EasyMoneyCrew I’d build one that’ll fit for $100. Little things like this take a long time to build, and make look good. (Sorry it took me so long to see this!)
@@WildAcresFarms sweet man i would pay that to get one
@@EasyMoneyCrew got an email or instagram or something I can use to talk to your privately?