I've never regretted buying a pre-owned Ultimaker S3 (dual core) 3D printer, it's identical to their larger S5 variant and boasts all the features of the S5, served up in a slightly smaller desktop friendly package. Having the capacity to print simultaneously in two completely different filaments is a difficult act to beat, even for all the high spec 3D printers reviewed in this video, none were dual core. My advice is check out online auctions for high grade small commercial 3D printers, before investing in a more limited retail hobby-style tabletop printer. 👍
Not sure why you would do the ender 3 pro and not the ender 3 v2 neo big improvement and a really good cost. And using sonic pad makes it even easier and faster
I bought a pre-owned Ultimaker S3 (dual core) 3D printer, with a dozen sealed packs of various filament on eBay and in my humble opinion, it's the dogs bollocks! 😉👍
Funny not one Bambu printer is mentioned here, have you even tried any of them yet? I've been 3d printing since 2016 and thought everyone talking about Bambu were paid shills getting their free 3d printers till I bought an A1, with the recall of the A1 got a full refund and bought the X1C with my money not given to me and can say hands down they are the best printers out there.
there are far too many printers to choose from, after spending 4 years on my ender 5 plus trying to get it to print properly and spending an extra 800 euro's on upgrades...i'm done, i need something that works right all day every day.
Very nice video and thanks for the infos! Just something minor: it's not Pr"osh"a like how you would say "brush" + a. It is PruSA - like how you would pronaunce the "sa" in sabotage.
Actually you are not entirely correct. In czech (where Prusa is from) the name of the guy is Průša, which would be pronounced like "proosha". So that's how we say it here :)
@@ethandolny "proo-sha".."oo" as in moon. And "sh" as in brush. Proo-sha. At least that would be the czech pronunciation....which you don't hear much outside of czechia
The best printer is a bambu lab x1c, second best is bambulab p1p third best is bambulab p1s and the fourth best is the bambulab A1. None mentioned here.
I think with the huge veraty of mods avible for ender i think that will be my 2nd and 3rd printer think i graned the ender 3 pro one and the ender 3 neo max i have a elegoo 3 pro been awsome but it absulitly hates petg had 2 warped beds the probe sucks majorly had to add bed springs to fix the bed mesh since they where dumb and didnt put springs in the 3 pro hate the elegoo screen the 4 u cant emove the screen like the 3 so thats a hell no for me the screen is to small and bulkey and just has a ugly look was debateing on geting a 3 max but i think elegoo finaly pushed its last sraw cant ulgrade to the parts i want with out ukgradeing the mother bord or useing a pi for kliper and the pins and then a pico for a 2nd mcu for the gpio pins its great for pla it sucks donkey nuts for petg
Dude, you are over 18, the tattoos, you have no excuse not knowing how to pronounce the single most recognizable name in 3d printing for years. It's 'Proosa', not 'Prussia'.
I've never regretted buying a pre-owned Ultimaker S3 (dual core) 3D printer, it's identical to their larger S5 variant and boasts all the features of the S5, served up in a slightly smaller desktop friendly package. Having the capacity to print simultaneously in two completely different filaments is a difficult act to beat, even for all the high spec 3D printers reviewed in this video, none were dual core. My advice is check out online auctions for high grade small commercial 3D printers, before investing in a more limited retail hobby-style tabletop printer. 👍
Fake review ? Just advertising ? Why not mention any of the bamboo 3d printers ?
Cuz bamboo is dogwater (I've actually never seen them before so idk)
@@hussalojr5916They are the best printers right now. Bad thing is that it's software is closed source.
@@handikappad Oh yeah? What makes them so cool huh?
@@hussalojr5916 Well great prints without much fiddling
@@handikappad Then how come there's a strange layer shift when printing on the Bambu huh?
Not sure why you would do the ender 3 pro and not the ender 3 v2 neo big improvement and a really good cost. And using sonic pad makes it even easier and faster
The ender 3 V3 comes out on the 14th and, if the SE is anything to go by, will be fantastic for how cheap it is
@@syko2695whould i buy the v3 se for 194 or the v2 neo for 181 cuz its on sale?
Good morning, in your opinion, what is the best 3D printer, with an approximate area of 300x300x300mm and that prints ABS and ASA filaments?
Thanks
What do you plan on printing?
I would recommend a Odin Smart
i want print channel letters, thanks
I wana get the ender 3 neo max since I'm starting to dislike elegoo
I bought a pre-owned Ultimaker S3 (dual core) 3D printer, with a dozen sealed packs of various filament on eBay and in my humble opinion, it's the dogs bollocks! 😉👍
So in conclusion, what would be the best for custom car parts? 😅
/guns
Youd be printing that in nylon or some more advanced filaments. Would recommend a high end printer for that like bambulab X1c
Funny not one Bambu printer is mentioned here, have you even tried any of them yet? I've been 3d printing since 2016 and thought everyone talking about Bambu were paid shills getting their free 3d printers till I bought an A1, with the recall of the A1 got a full refund and bought the X1C with my money not given to me and can say hands down they are the best printers out there.
Flsun?? Bamboo?
Thank you from a new 3d printer
I am looking for commercial purposes? any suggestion
THEY BE MEAT RIDING THE ENDER 3 PRO!!!!!
Kobra 2?
there are far too many printers to choose from, after spending 4 years on my ender 5 plus trying to get it to print properly and spending an extra 800 euro's on upgrades...i'm done, i need something that works right all day every day.
fusion 3 ?
Very nice video and thanks for the infos! Just something minor: it's not Pr"osh"a like how you would say "brush" + a. It is PruSA - like how you would pronaunce the "sa" in sabotage.
Actually you are not entirely correct. In czech (where Prusa is from) the name of the guy is Průša, which would be pronounced like "proosha". So that's how we say it here :)
@@MeneT3k3l wait.. "proo-sha" or pro-sha"?
@@ethandolny "proo-sha".."oo" as in moon. And "sh" as in brush. Proo-sha.
At least that would be the czech pronunciation....which you don't hear much outside of czechia
Ender 3 v2 is honestly better than the pro and just as many upgrades for it.
Yeah I just upgraded my original Ender 3 with the new sprite and pro parts
Pru sa not Prussia
Yes, it is. Průša sounds like Proo-scha. Prussia is very close when it comes to the constructor surname's pronunciation in Czech.
@@JanPodhajsky but is says Prusa on the device, not Průša, so Pru sa.
It was driving me crazy the way he kept saying Prussia. Told me this was just another lame advertising video. On to a more relevant video.
Very good review. All of these have had good reviews.
it's amazing
Wish this included pricing....
Nice
The best printer is a bambu lab x1c, second best is bambulab p1p third best is bambulab p1s and the fourth best is the bambulab A1.
None mentioned here.
Sounds like you're a shill
3D print plastic money one day!
I think with the huge veraty of mods avible for ender i think that will be my 2nd and 3rd printer think i graned the ender 3 pro one and the ender 3 neo max i have a elegoo 3 pro been awsome but it absulitly hates petg had 2 warped beds the probe sucks majorly had to add bed springs to fix the bed mesh since they where dumb and didnt put springs in the 3 pro hate the elegoo screen the 4 u cant emove the screen like the 3 so thats a hell no for me the screen is to small and bulkey and just has a ugly look was debateing on geting a 3 max but i think elegoo finaly pushed its last sraw cant ulgrade to the parts i want with out ukgradeing the mother bord or useing a pi for kliper and the pins and then a pico for a 2nd mcu for the gpio pins its great for pla it sucks donkey nuts for petg
your#1 is from the year 1018 bruh.... tf
You lost all credibility when you said ender 3 was a good product
Might be cheap.
But it don't work until its been upgraded
Prusha
Its Josef Prusa not Jusuf !
You know nothing about 3d printing.
You can't even pronounce Prusa.
Clickbait
gpt generated video
REPEAT AFTER ME: Pru sa…. Pru sa….It is NOT Prusha
He probably has never touched a printer in his life.
Wow, more dislikes than like... Yikes
Dude, you are over 18, the tattoos, you have no excuse not knowing how to pronounce the single most recognizable name in 3d printing for years. It's 'Proosa', not 'Prussia'.