#FilamentOne

In this video we review the PROFI Box Mini which comes with 4 sample rolls of Filament. We put the FilamentOne filament against our “normal” filament we use every day. To be blunt and honest, FilamentOne our performed our baseline test using their Filrunner design from Thingiverse. This is the filament that pushed us across the threshold to finally become a member of their subscription boxes. We cannot say enough about this filament. If you love filament one filaments, I would recommend that you purchase their PROFI Box subscription; however, if you are still on the fence, like we were prior to testing, then I would suggest that you purchase their PROFI Box Mini subscription. This way, you will get 4 different filament samples to try out on your own. Let’s be honest, you know yourself better than me and my video is just a reflection of the things I like. My opinion should only get your foot in the door, test it for yourself and let me know in the comments what you think about their filaments. Don’t forget to Like, Share, Subscribe, Click that Notification Bell and head over to our Patreon and support our Channel. Thank you and Happy Printing, Cheers!
Patreon: / eitri3d
Facebook: / eitri3d
Instagram: / eitri3d
Twitter: / eitri3d
Links to the items mentioned in the video are listed below. These links are for your convenience.
Filrunner by filamentone: www.thingiverse.com/thing:384...
-----------------------*Affiliate Links ONLY in this section*-----------------------
This video contains affiliate links. If you click on one of them, and place an order, I'll receive a small commission. I want you to rest assured that if I am placing an affiliate link to a brand/product, I have tested that brand/product and it adheres to MY standard of use. If a brand/product does not meet that standard, I WILL NOT be an affiliate of theirs.
PROFI Box Mini 1.75mm - Monthly Premium Sample Subscription:
www.filamentone.com/collectio...
FilamentOne:
www.filamentone.com/?aff=19
--------------------------------*End of Affiliate Links *---------------------------------
Music:
“Viking” Aakash Gandhi
“Book The Rental” RAGE

[@Fetchas1]

How about your feedback about all metal hotend upgrade? I would like do something like that, but I'm probably try the mosquito hotend.
Thanks for your work 👍
Congrats from Portugal

[@Eitri3D]

Absolutely love it! Would not go back to factory hotend for anything. Only clog was due to filament that was out of tolerance (measured 2.13mm). Printed 23 Benchys from 6 different filament companies, to include TPU with zero issues. This and bed leveling upgrade are tied for best upgrade, this far. Will do this again if I get another printer without an all metal hotend.

[@Fetchas1]

@@Eitri3D Thanks for your feedback. So I need to have a conversation with my wallet 😂 (again)
For bed I use yellow springs, are more rigid than the original ones. I only have to add 4 washer near the bolt beyond the bed.

[@Eitri3D]

Good luck with that conversation. Me and mine aren’t on speaking terms right now. Just upgraded my audio recording equipment, hopefully it improves the audio of our videos. If not, the wallet may just leave me. Lol. Can’t wait to hear how your upgrade goes.