Yesterday I did RGH3 on my trinity watched Your video about that. And many time did CFW on my psp also thankfully of Your videos. You are doing great job Mr. Mario.
Just finished RGh3'ing my trinity r2d2 special edition thanks to you, watching your tutorial gave me the confidence to do it. Ive hacked pretty much every device Ive ever owned in some way, but never a 360. I have wanted to do it since I was 13, so thank you for real. It wasnt my first time soldering but I havent done it since I was 15 (I am 25 now)
On my first RGH install with a trinity board, I messed up the post point as well. Couldn't get solder onto the point and as I kept trying, it just made it worse. (Was using a really garbage soldering iron. Ordered a micro soldering Iron to arrive the next day) So after some research, I learned on a forum you can just flip the motherboard back over and scrape away at a via at STP5D1 and solder your wire there. I had to do this and it worked like a charm.
Yep! That's a good alternative point to use, although quite small. The only thing I fear about that is most people who messed up the big POST point probably won't be able to successfully get that alternative. Awesome you managed to get it!
I just left a comment on another video talking about me fucking up hitting the post point. And this video was in the endscreen. Absolutely gonna buy one of these for my trinity
having trouble with my trinity so looking to try a post fix to see if it help so where on the board does the wire solder to from the post fix adapter is it to POST or SMC_POST ??
Good video clarifying this. Did you get the idea for this video from the 360hackss subreddit? That guy was having a mental breakdown about the POST point on his Trinity yesterday.
Nope, but it was perfect timing 🤣 I had this video recorded, uploaded, and scheduled at least a week prior. This question will forever be asked, though.
For the postfix adapter v2 on a trinity board, do you run a cable from SMC post from the back to the front and solder it to the postfix adapter? If so, what spot do you solder it to on the adapter?
Instead of soldering to POST on the motherboard, you solder to one of the breakout pads on the adapter. Solder to whichever one has continuity to it when tested, I think on the V1 only POST_6 works.
Greetings from Bulgaria. What is the cheapest flasher for the Xbox 360? Could I just remove the nand from an usb flash drive and solder some wires to the Xbox?
Hi mr Mario I’ve a corona with a RGH 3.0 but I’ve a really slow boot on it sometimes more than 4mn , I also use a post fix adaptor V2 . I can’t find what can be the problem I did many RGH 3.0 on different models by following your videos I never got this and I can’t find anywhere the solution . Did you get some issues like this and what can cause this problem ….thank you for your videos helping me a lot
Try changing the timing? You dont even need to reopen it, just dump your nand with homebrew, edit it in jrunner and rewrite it with the homebrew (forgot the name of the tool)
@@zz19991yeah I tried to recreate an image by using Jrunner pro with my retail nand and then flash with the new updflash.bin with Xell or 360 nandflasher but no thing change no success… I do not understand
@@MrMario2011 Thank you so much for your advices like as usual for corona I used 1k ohm resistor and wrapping wire 30awg and postfix adapter V2 but I’m gonna try an other resistor value or without resistor and then my wire routing … will let you know on the comment section if it’s work 😉
Yesterday I did RGH3 on my trinity watched Your video about that. And many time did CFW on my psp also thankfully of Your videos. You are doing great job Mr. Mario.
Thanks for hanging out!
@@MrMario2011 I got heart :D
Just finished RGh3'ing my trinity r2d2 special edition thanks to you, watching your tutorial gave me the confidence to do it. Ive hacked pretty much every device Ive ever owned in some way, but never a 360. I have wanted to do it since I was 13, so thank you for real. It wasnt my first time soldering but I havent done it since I was 15 (I am 25 now)
Glad the videos helped!
On my first RGH install with a trinity board, I messed up the post point as well. Couldn't get solder onto the point and as I kept trying, it just made it worse. (Was using a really garbage soldering iron. Ordered a micro soldering Iron to arrive the next day) So after some research, I learned on a forum you can just flip the motherboard back over and scrape away at a via at STP5D1 and solder your wire there. I had to do this and it worked like a charm.
Yep! That's a good alternative point to use, although quite small. The only thing I fear about that is most people who messed up the big POST point probably won't be able to successfully get that alternative. Awesome you managed to get it!
I have messed up my pll point on Trinity... Could you help with forum link
@ChfHappySack
@@razimohiyadheen8245there is no alt PLL point. Do S-RGH
I just left a comment on another video talking about me fucking up hitting the post point. And this video was in the endscreen. Absolutely gonna buy one of these for my trinity
Good luck!
Can you please show us how to put an ssd in a 360? We need a modern video on this
I've already made a video on it recently.
@@MrMario2011 thanks for the reply! I looked before asking and didn't see it. I'll take another look!
I have the same software installed so how do i remove it or atleast update it because i don't want it if i don't even work
I bought myne second hand with the mod installed
I have some spare adapters. I had some Coronas I never could read the NAND on. SD card adapter fail... Any tips for corrupt 4GB Corona firmware?
Reading can be tricky, could be your soldering points. I managed with Pico after few attempts and using very thin wires
Try a different sd card reader. The cheapest no name ones looking like a flash drive are the best for this job.
The SD card method is very picky about which SD card readers it works with. I've personally had no issue with the xFlasher360
having trouble with my trinity so looking to try a post fix to see if it help so where on the board does the wire solder to from the post fix adapter is it to POST or SMC_POST ??
The POSTfix adapter replaces POST
Good video clarifying this. Did you get the idea for this video from the 360hackss subreddit? That guy was having a mental breakdown about the POST point on his Trinity yesterday.
Nope, but it was perfect timing 🤣 I had this video recorded, uploaded, and scheduled at least a week prior.
This question will forever be asked, though.
Hi, can i use the adapter for my xbox360 E? Which version do I need? There are v1-v4 on aliexpress my box is from 09/2014
Any that will work.
For the postfix adapter v2 on a trinity board, do you run a cable from SMC post from the back to the front and solder it to the postfix adapter? If so, what spot do you solder it to on the adapter?
Instead of soldering to POST on the motherboard, you solder to one of the breakout pads on the adapter. Solder to whichever one has continuity to it when tested, I think on the V1 only POST_6 works.
Greetings from Bulgaria. What is the cheapest flasher for the Xbox 360? Could I just remove the nand from an usb flash drive and solder some wires to the Xbox?
Raspberry Pico is pretty cheap.
Corona v4 can be read with sd card reader, i’m serious. The cheapest one you find, the better.
Pico, if its single use, you can reuse it later for something else
PicoFlasher with Raspberry Pi Pico
For postfix v1, wich post is the one to soder? 6,4 or 1?
I can't remember, but only one of the pads has connectivity. I believe it was 6, but you would have to test it with a multimeter.
@@MrMario2011 thank you
I'd love to see a full install of rgh3 with postfix adapter v2 on xbox 360 e.
I covered it all on my Corona RGH3 tutorial.
Hi mr Mario I’ve a corona with a RGH 3.0 but I’ve a really slow boot on it sometimes more than 4mn , I also use a post fix adaptor V2 .
I can’t find what can be the problem I did many RGH 3.0 on different models by following your videos I never got this and I can’t find anywhere the solution . Did you get some issues like this and what can cause this problem ….thank you for your videos helping me a lot
Try changing the timing? You dont even need to reopen it, just dump your nand with homebrew, edit it in jrunner and rewrite it with the homebrew (forgot the name of the tool)
@@zz19991yeah I tried to recreate an image by using Jrunner pro with my retail nand and then flash with the new updflash.bin with Xell or 360 nandflasher but no thing change no success…
I do not understand
Could try changing the resistor value, use no resistor, or change wire routing.
@@MrMario2011 Thank you so much for your advices like as usual for corona I used 1k ohm resistor and wrapping wire 30awg and postfix adapter V2 but I’m gonna try an other resistor value or without resistor and then my wire routing … will let you know on the comment section if it’s work 😉
You recommend a 3k oh resistor in parts listing its for what
Why do you ask for the dislikes? lol
Why not?