U ve fitted bearings but the white plastic shaft is causing a lot of friction wth bottom surface .Keep the windindin part verticle rather than horizontal n see the results.
I have not watched it yet and i do not know if his motor is legit but coils dont work like that. If the 3 coils are electricaly 120° out of phase with each other it will create a continuous spinning magnetic field. The magnets inside pretty much acts as one big magnet that anchors on the spinning field of the coils. I see where you are coming from tho, in brushed dc motors coils can only have 2 polarities and a single supply voltage that is just reversed.
@@spageti6640 as you mentioned, how it is even possible to make DC 120 degrees out of phase electrically? Are you not confusing between DC and three phase AC? Kindly study AC Induction motor theory and also DC motor theory. Thanks.
That's where the controller comes in boys That's the whole point of a BLDC controller or an AC 3 phase inverter as opposed to a single phase three pole inverter I mean you seem to have no concept of the topic of which you're discussing and I'm not trying to be rude I'm simply trying to point out that one of you clearly knows electrical engineering The other is clearly learning about electricity as a source of energy, don't you find it more interesting that neither one of you seem to understand the concept of why the other ones thoughts don't work and whether or not something is legit. The reason this works is a the outer coils do lock in phase with the inner coils however you have a controller that systematically and on the nanosecond or possibly even Pico's second level switches the polarity of the inner coil back and forth from north to south reversing poles instantly And does this hundreds of thousands if not millions of times during the rotation of the stator which transfers to mechanical energy which allows you to move something it's all in the controller board as to how fast and which poles get flipped at what time The point is when it locks phase with the inner coil and that inter coil rotates to turn and lock up it switches on it that instant to turn yet again and continue the motion. The chips on the board the transistors the variable resistors or potentiometers used all point to what coil gets flipped and when and how fast that causes the mechanical energy to occur at a higher rate or a lower rate but with more force from the magnetic field building up. 😊
Hi, I got a thinking, Since u able to make so many free energy or rotor, Why dont u try to make all ur rotor into a drone, Add in blade, Make the drone that able to fly with free energy ? Haha..
Listen I have wound like 50 coils I'm watching your videos I'm making these things with a perfectly aligned at the right degrees and I cannot get a motor to spin I'm so frustrated I have neodymium magnets a ton of them please if you could help me with this project I would appreciate it more than I could tell you maybe my coils aren't big enough I have no idea but please help thank you
whats an engine/motor that is not a generator in reverse? if you rotate a line of wire, not a magnet, in a coil, you dont have resistance, only motor action when providing current
A current will still be induced in an air core coil... coils with less inductance make motors than spin at a higher rpm with torque being traded for speed. To use his supposedly 20k rpm motor as a generator you would have to spin it at 20k rpm
Polarity can be reversed but it looks like he wrapped the coils clockwise so if positive was on the right it will make a south pole facing the rotor magnets. Look up the right hand rule of induction to better understand how it works
I want to know from you, where do you get the shafts, that too cut to the perfection, whether do you prepare these shafts? Let me about these shafts. Where these shafts are available?
I don't know why, but I started watching people do electric engines.
Because you probably got tired of paying those electric bills for something that's everywhere, infinite and free.
@@Andrei369y This is due to lack of knowledge.
удивительно что зазор между магнитом и катушкой очень большой но мотор всё таки работает ! Молодец парень хорошее видео !
Пожалуйста, посмотрите этот стих
Откровение 14:12
12 Здесь терпение святых, здесь соблюдающие заповеди Божии и веру в Иисуса.
@@giovannicorraliza4393 нечем заняться ! Мне не пиши коментариев
@@giovannicorraliza4393 о0?
@@giovannicorraliza4393 ты тупой да или да?
Khoảng cách lớn, hiệu suất thấp, vẫn hoạt động
yesssss 3 plane and 2 plane like this 👍👍👍.
thankyou genius
Hi janu,,,
U ve fitted bearings but the white plastic shaft is causing a lot of friction wth bottom surface .Keep the windindin part verticle rather than horizontal n see the results.
Good sense of astethics.
Did you check the RPM?
Suggest a practical application for this project, that would be nice!
Practical application:
1.We can make smooth 6/7 Dof
Robot arm/manipulator...
2.car
3.drones..etc
The pvc will melt easily, this can only be a prototype
Rc plane
Not more than 2k
Can you make one just the size of a real motor? like those that stand in motorcycles (the same size to make).??
R.P.M.. 100%.. TORK.. 0%.. 👍👍
am building a a 34 " Tunnel hull boat I think this will work perfectly
you're the artist
You are genius
I would like to know the connection of the solenoid wires. Thank you
Excellent! Gracias. Thanks. Merci. 🙂🙏🏻💚
So very good jabardast maind.
How you have arranged the polarity of coils? N S N or S N S ? In either case two similar poles are adjacent.
I have not watched it yet and i do not know if his motor is legit but coils dont work like that. If the 3 coils are electricaly 120° out of phase with each other it will create a continuous spinning magnetic field. The magnets inside pretty much acts as one big magnet that anchors on the spinning field of the coils.
I see where you are coming from tho, in brushed dc motors coils can only have 2 polarities and a single supply voltage that is just reversed.
@@spageti6640 as you mentioned, how it is even possible to make DC 120 degrees out of phase electrically? Are you not confusing between DC and three phase AC? Kindly study AC Induction motor theory and also DC motor theory. Thanks.
That's where the controller comes in boys That's the whole point of a BLDC controller or an AC 3 phase inverter as opposed to a single phase three pole inverter I mean you seem to have no concept of the topic of which you're discussing and I'm not trying to be rude I'm simply trying to point out that one of you clearly knows electrical engineering The other is clearly learning about electricity as a source of energy, don't you find it more interesting that neither one of you seem to understand the concept of why the other ones thoughts don't work and whether or not something is legit. The reason this works is a the outer coils do lock in phase with the inner coils however you have a controller that systematically and on the nanosecond or possibly even Pico's second level switches the polarity of the inner coil back and forth from north to south reversing poles instantly And does this hundreds of thousands if not millions of times during the rotation of the stator which transfers to mechanical energy which allows you to move something it's all in the controller board as to how fast and which poles get flipped at what time The point is when it locks phase with the inner coil and that inter coil rotates to turn and lock up it switches on it that instant to turn yet again and continue the motion. The chips on the board the transistors the variable resistors or potentiometers used all point to what coil gets flipped and when and how fast that causes the mechanical energy to occur at a higher rate or a lower rate but with more force from the magnetic field building up. 😊
Great
20,000 RPM my ass - but thanks for the tutorial ;)
I doubt there's even 2000 there.
why did you not put iron at the centers of each coil to amplify the magnetic field and direct it. thats going to be lioke 30x weaker!
yeah! also I would have asked the same
the presence of an iron will create turbulence
... turbulence
Can we make drone using this motor
20000 rpm ?????????????????????????????????????????
we can run this motor by 9v HW battery are not ???
SIR FIRST LIKE
Thanks your video👍
Super Bro I like this video 📹
Brushless? I hope it’s powerful
how do i arrange the wires? Do I have to use the same wire for all coils, or do I do it separately?
bldc works on three phase so three separate winding need
The 3 coils are connected in a "wye" configuration. I just got done studying bldc motors in college lol
@@beawareofthegreatjjs what does a "wye" configuration mean?
भाई आप भारतवर्ष 🇮🇳🚩से हो क्या🙏🏻☝🏻🗡🌍🚩💎🚩 यदि हो तो उत्तर देना कृपया 🙏🏻🇮🇳
NATARAJ scale is available only in India.. Jai Hind. 👍
thanks
First like and comment are from me
I don’t think most pepole ever built a brushed motor but with titanium connected to the rear maybe it will last longer?
the big question is,,,
'how we get the magnet ?' or
'how we make the magnet ?'
Hi,
I got a thinking,
Since u able to make so many free energy or rotor,
Why dont u try to make all ur rotor into a drone,
Add in blade,
Make the drone that able to fly with free energy ?
Haha..
Need help maybe you can help me I need a wind turbine half a meter long. Got any idea where I can get one.
How I can know max and min range of voltage for my hand mad motor, how can I Calc at and based on what ?
Very nice and easy 👌👍
Awesome
Appreciate your effort, on contrary its not of 20000 Rpm. Please review your specs its an extra over estimation. Rgd Iqbal, Karachi
Nice bro🎉👌🎉🤩🤩
Amazing broooo nise
So creative 😊
what kind of battery did you use?
One word, insane.
3:39 why 60 turns specifically?
Tendria que girar mucho mad roza o el rotor muy liviano
Super!
Motor: $5, ESC: $50-$100... "To increase margin add value..."
Hai scoperto l'acqua calda?? Sono anni che esiste questo motore non è una novità!!!
It's available?
kyaa ise haat se start karnaa hogaa kyaa?
nice bro😷
Listen I have wound like 50 coils I'm watching your videos I'm making these things with a perfectly aligned at the right degrees and I cannot get a motor to spin I'm so frustrated I have neodymium magnets a ton of them please if you could help me with this project I would appreciate it more than I could tell you maybe my coils aren't big enough I have no idea but please help thank you
you using ESC? don't try to recreate off a youtube video that gives no details go find a real tutorial. this is a showcase.
Connection ke baare me bataayaa nehin?
Ye controller ke baare me kutch nehin bataayaa? Binaa controller aur sensor ke keise chalegaa BLDC motor?
If u put an aerofoil wing on it it gonna fly
Good toy:)
I will try soon
Kalo buat yang AC bang gimana. Dengan model yang sama
Please see this verse
Revelation 14:12
12 Here is the patience of the saints: here are they that keep the commandments of God, and the faith of Jesus.
Nobody else can't even think of rhat
How many volts we can use for the motor?
Mind nice
Motar drivar k bager chala sakte h kya
Very nice construction. May I know where to buy PVC sheets?
whats an engine/motor that is not a generator in reverse? if you rotate a line of wire, not a magnet, in a coil, you dont have resistance, only motor action when providing current
A current will still be induced in an air core coil... coils with less inductance make motors than spin at a higher rpm with torque being traded for speed. To use his supposedly 20k rpm motor as a generator you would have to spin it at 20k rpm
When Wrapping the Copper How Do I know Which set of Wires will be the in/out? Or does it matter?
Polarity can be reversed but it looks like he wrapped the coils clockwise so if positive was on the right it will make a south pole facing the rotor magnets. Look up the right hand rule of induction to better understand how it works
@@916619jg Thank you so much
Хорошая, познавательная работа, но обмотка такая ужасная( можно было чутка другим способом сделать и по аккуратней( и лаком их не покрыл(
Good
Good 🇮🇳👍 Kuki
Eingonda Takpagi Utpa Oiramlady ?🙇
Is this 20000 rpm or 2000 rpm
Coil 1 in +coil 2 in +coil 3 in =join
Coil 1 out + coil 2 Out +coil 3 out = controller
Can u plz make a drone with this motor
Control make eppadi panna
যে কোন তিনটা জোরা দিলেই হবে?
how come both pipe are 42mm ??
Good sir
Is the best
wow emezing
can I put this motor in the 220 v outlet ?
No , only using 12v dc
I love these
Can it power e bike
How to join copper link
Brother Can I use this motor in an electric skateboard?
connection details nehin dikhaayaa?
Ok felicitari
Kitna wat h
Too much Gap between magnet and coil ,should be less than 0.2 mm
103.5 FM ( mm. Of Copper )
It's a vibrater
Cómo es la conección de las bobinas .gracias
Great..But which gum did you use? Where do you get the PVC sheet and where can you buy the copper wire and controller
Sir if possible make 775 dc motor thanks
How to calculate wire guage and turns for bkdc motor
Start with 0.5 mm wire for one horsepower and work your way up from there my friend, these vids never tell us enough 😢
And you fit as many turns as you can!
How Many Coiling ?🙏
60 turns each
Первая трубка 42 и кольца 42,по моему какое-то фуфло.
Apakah bsa buat bor kayu
لك عاش خهههه😍
Please using dinama 3 phasa . Please
Please make it without a ball bearing
Brash bush Alternative
I want to know from you, where do you get the shafts, that too cut to the perfection, whether do you prepare these shafts? Let me about these shafts. Where these shafts are available?
This fella is really into shafts
Those are basically nails, cut of the heads and tails, there it is the "Shaft"
@@chrishayes5755 hahahahahahahagaha
I like