What do we think of the colour choice?! Am I Batman yet? Would you have gone with a different option? If you want your own calipers done check out instagram.com/caliper.refurb.mcr/ and quote ZH Cars for 10% off.
Looks great. But why remove the tape and plastic bag before spraying the lacquer. That’s so weird considering there’s moving and sliding parts inside the calipers.
@@stena_vlogs second that and more importantly why didn’t you cover more when spraying…i really hope that you clay the car immediately after painting over spray has a way to get everywhere
Looks good but i think burnt copper colour would have looked better and more "classy" Also if you get 4 axle stands you can raise the entire car up, remove all 4 wheels, prepare all 4 bakes and after you painted 1 brake jump up to the next and so on that way when you're back on the firstt it should be dried up. Save alot of time.
Great video! I just painted mine. When can I wash the car again? Do I need to wait a certain amount of time before the calipers can get washed w/ a pressure washer? Is wheel cleaner safe to put on like normal or should that be avoided all together? Thanks!
How did you get the rear callipers so smooth? I just had mine done and my rears are quite rough looking? Did you brush them or sand them down or just use a lot of coats?
Nice job. It's so easy to just take the calipers, pads, and rotors off, put just the caliper on, then spray the calipers ;-). Way less taping and masking.
Looks like he did a decent job. Not sure why DIY is a bad thing, earlier comment??? I would have probably put some cardboard on the block paving though, you could have ended up with the yellow brick road 😁
15:20 ... you have serious brake problems dude .... that disc is done for, probably your caliper too, surprised this car even stops at all, with the pad touching 20% of the disc only ....
What do we think of the colour choice?! Am I Batman yet? Would you have gone with a different option? If you want your own calipers done check out instagram.com/caliper.refurb.mcr/ and quote ZH Cars for 10% off.
Looks great. But why remove the tape and plastic bag before spraying the lacquer. That’s so weird considering there’s moving and sliding parts inside the calipers.
I absolutely agree to that!
@@stena_vlogs second that and more importantly why didn’t you cover more when spraying…i really hope that you clay the car immediately after painting over spray has a way to get everywhere
@@msk3905 exactly!
Looks good but i think burnt copper colour would have looked better and more "classy"
Also if you get 4 axle stands you can raise the entire car up, remove all 4 wheels, prepare all 4 bakes and after you painted 1 brake jump up to the next and so on that way when you're back on the firstt it should be dried up. Save alot of time.
Who ever asked a question go no reply, who ever commented looks great, amazing etc got a love!!!
Looks nice, but who gets to remove the overspray from the wheel wells & brick pavers?
Great video! I just painted mine. When can I wash the car again? Do I need to wait a certain amount of time before the calipers can get washed w/ a pressure washer? Is wheel cleaner safe to put on like normal or should that be avoided all together? Thanks!
Great job mate! What yellow primer and paint did you use?
How did you get the rear callipers so smooth? I just had mine done and my rears are quite rough looking? Did you brush them or sand them down or just use a lot of coats?
does anyone know which yellow color & spray brand did he use? & also am curious on which primer he used ?
Thank you 🙏🏽
Class job !! Could I ask which tyre shine your using pal ?
Great job,
Good video showing all the steps, how many can spray of primer and color and clear coat, should I buy to do the 4 calipers.
Nice job. It's so easy to just take the calipers, pads, and rotors off, put just the caliper on, then spray the calipers ;-). Way less taping and masking.
Did you use duplicolor yellow for ur calipers? That the perfect yellow
where did you buy your amg vinyl decal? how would I know the size is the right size for my caliper?
Are you still doing the caliper paintings?
Nice color! You can share the characteristics of the yellow color? Tks
Looks great was going to pay someone to do mine but think I will give it a bash
the primer used, was that a direct to metal primer? or was a metal prep wipe used , but not shown? just wondering
Amazing job, looks great
Looks like he did a decent job. Not sure why DIY is a bad thing, earlier comment???
I would have probably put some cardboard on the block paving though, you could have ended up with the yellow brick road 😁
As long as the owner - aka me - is happy with the result...I see it as a good thing! Haha true
This looks sick bro .you got a new sub here👌🏽…where can I buy this paint at if you don’t mind me asking?
Jhhheeze that looks really good 💯
Amazing job 👍👍
Miss your content man. How much did you pay for this to be done?
Looks great!!
That car is all sprayed and you don’t know it !! 🤦🏻♂️😁 If you want to do it right, you have to cover all the area around.
Looks mint 👍🏻
Hello zubair missing your content loads keep active plssss
Sick!
Tbh the AMG logo on the callipper gone bigger 👎🏾, but good video
you spread the lacquer all over the rotor and you forgot your N95 mask
yea i dont understand why he didnt spray lacquer clear coat on before un masking.
15:20 ... you have serious brake problems dude .... that disc is done for, probably your caliper too, surprised this car even stops at all, with the pad touching 20% of the disc only ....
Just noticed that too, seizing calipers 🙈
Looks good but that front decal is way to big
@2:25 I'm so anal that the squint last line before the "A" in the logo would drive me crazy haha
You can see how the Logo is supposed to be at 5:00
Just noticed this...beady eye indeed! 🤣
@@DrivesbyZH Sorry to point it out mate, that's just me being anal though lol callipers looks great in the colour, reminiscent of solar beam yellow!
The difference in size of the decals look terrible
Fake ceramic🤣🤣🤣🤣🤣🤣🤣🤣🤣
Amg ceramics are ‘burnt copper’, not yellow