Seems like a simple enough solution! I have been looking into options of pre-made brackets ($$$) and have actually seen a lot of people unhappy with how high the seat sits using them. Your approach actually seems like it would allow the seats to sit lower into the car. I'm thinking of giving this a shot with some Cipher seats. How have things been holding up with your brackets? Do the seats feel nice and firmly planted, not bounce up and down? Thanks for sharing your video!
spoolinpos yea man quite Easy to do and a hell of a lot cheaper.. never had issues with height and the eclipse is a pretty small car. And yea seats are solid no movement at all if you do it right and get a think steel you won’t have any issues.. The ones I made here Have held up great I did get a couple tack welds on there but honestly don’t think that was necessary just use lock washers or Loctite.
I just found this video so I have a few questions... one question did you do this stuff yourself I'm assuming you did since you're DIY like I am. How hard was it steering wheel to do? I love the interior that how did you get the carbon fiber wrap to stay on the dash I have a lot of trouble trying to do that. You have like everything that I'm working on and that's my colors definitely an inspiration for what I'm working on my 99 Eclipse Spyder.
Yes I do everything myself. the steering wheel wasn’t to bad I I had to relocate the cruise control and the horn was a bit tricky other then that really quite easy just need the steering wheel and a hub to mount it. As for the wrap.. I cleaned it really good any armorall or anything still on there will cause an issue use a degreaser needs to be very clean. Also get a quality wrap something with a good adhesive mine has been on there for years and I don’t think a single spot has peeled up. If you have any questions along the way I have no problem trying to help you out good luck on your project
were you able to connect the sliders to all the drilled out brackets from the factory seat.. mine appear to only have enough length to attach one on rear and front
At first I had the same issue so I only used one of the holes on the ones I couldn't fit two... Since then I have had the brackets that were shorter extended.. Just welded a piece of metal on the bracket and drilled new holes sorry it took for ever to write u back if u have any other questions just ask
How do you take those rivets or I bolts out, I bought some new racing seats and I need the feet from the old seats but those bolts are what's stopping me from putting them on. Thanks
I used a grinder. Just grind or cut one side off and it will fall out of the other side. If u don't have a grinder you might be able to break it with a hammer and flat screwdriver.
97-99 best Eclipses
Looks sick
Thanks very much for posting this video. I may have to put new seats into my '91 Eclipse, so the material may be very useful.
Hope it helps. If you have any questions just ask
Seems like a simple enough solution! I have been looking into options of pre-made brackets ($$$) and have actually seen a lot of people unhappy with how high the seat sits using them. Your approach actually seems like it would allow the seats to sit lower into the car.
I'm thinking of giving this a shot with some Cipher seats. How have things been holding up with your brackets? Do the seats feel nice and firmly planted, not bounce up and down? Thanks for sharing your video!
spoolinpos yea man quite Easy to do and a hell of a lot cheaper.. never had issues with height and the eclipse is a pretty small car. And yea seats are solid no movement at all if you do it right and get a think steel you won’t have any issues.. The ones I made here Have held up great I did get a couple tack welds on there but honestly don’t think that was necessary just use lock washers or Loctite.
Looks awesome
Thanks man
looks good bro
anyone know any good websites to find a racing seats for a Mitsubishi eclipse 2005?
Damn gorgeous!
what brand seats?
I just found this video so I have a few questions... one question did you do this stuff yourself I'm assuming you did since you're DIY like I am. How hard was it steering wheel to do? I love the interior that how did you get the carbon fiber wrap to stay on the dash I have a lot of trouble trying to do that. You have like everything that I'm working on and that's my colors definitely an inspiration for what I'm working on my 99 Eclipse Spyder.
Yes I do everything myself. the steering wheel wasn’t to bad I I had to relocate the cruise control and the horn was a bit tricky other then that really quite easy just need the steering wheel and a hub to mount it. As for the wrap.. I cleaned it really good any armorall or anything still on there will cause an issue use a degreaser needs to be very clean. Also get a quality wrap something with a good adhesive mine has been on there for years and I don’t think a single spot has peeled up. If you have any questions along the way I have no problem trying to help you out good luck on your project
@@OneLove7161 awesome! How did u relocate the cruise control? Yeah thanks i appreciate it.
Fuck ._. So thats were i fucked .... Thanks for this Video!
Could u make a vid were u have a list of the name to front bumper, rear, lights etc.? And where I can buy them on internet? Would be really useful
were you able to connect the sliders to all the drilled out brackets from the factory seat.. mine appear to only have enough length to attach one on rear and front
At first I had the same issue so I only used one of the holes on the ones I couldn't fit two... Since then I have had the brackets that were shorter extended.. Just welded a piece of metal on the bracket and drilled new holes sorry it took for ever to write u back if u have any other questions just ask
OneLove7161 nice job on this man, you plan on making any more videos?
Yea I plan on making more videos just been really busy I have some footage just need to edit. Will post soon
where did u get the sliders I can't find any could I use the stock ones
eclipse squad
How do you take those rivets or I bolts out, I bought some new racing seats and I need the feet from the old seats but those bolts are what's stopping me from putting them on. Thanks
I used a grinder. Just grind or cut one side off and it will fall out of the other side. If u don't have a grinder you might be able to break it with a hammer and flat screwdriver.
Could you post the ebay link?
I looked a little but couldn't find them. Sorry
did u ever add in a harness bar an if so possible video an what size bar u used
damn i wish i had this video when i had mine i had a hard time trying to figure it out lol..
how long is the metal across
were u buy metal from
Got it from ace hardware
What size bolts did you use ?
How did u drill the feet of the sliders ?
Damn how much money have you spent on your car so far?
Hey man would you ever sell the car
is that car awd or fwd
Hunter Snyder fwd
Post more vids
lol