After watching about 7 vids where the title said how to re badge your car just to find out that they all showed you how to do it with a brand new after market badge that had a perfect layer of adhesive on the back.. I was strictly interested on how you re install these damn things so finally I found why was looking for . Thank you sir 🙏🏻
@@poppinfresh5261 automotive double sided tape. It's very strong and easily removed with fishing line. I've had my emblems on with double sided tape for years no issues.
@@Trenscendent I love how people think weatherstripping and gasket adhesive would work well to mount emblems that obviously were mounted with mounting tape. Then making the claim it can be used to remount emblems on fresh paint. Adhesive with solvents in it on fresh paint… smeared on haphazardly. I guess they’ll find out the adhesive doesn’t stay that flexible when it dries and an emblem will easily pop off a body panel taking some fresh paint with it. I try to cut mounting tape in a way which minimizes dirt getting behind the emblem.
Thanks I appreciate this. The emblem S-10 came off the back of the pick up truck at the car wash. I was lucky enough to see something fly outside to the front on the entrance while I was spraying the truck with water. Got the part and that’s why I’m here, now I need to get what you used, thanks. 👍
Thanks for the recommendation. This looks like what I'm after. I was considering the 3M press in place transfer adhesive which looks like a nightmare to use. This product looks much better and I won't have to clean it up around the edges. Tip - use dental floss with a hair dryer. I wouldn't trust a spatula to not scratch the paint.
@@froglobster I used 20lb fishing line yesterday to get my camaro shields off left and right sides. Line broke 2-3 times per shield so recommend 40 or 50lb line for stronger pull. I used spray bottle of Goof-Off afterwards to clear Remaining residue of glue off after peeling off what I could. Uses car wash towels to clean it up. About 15mins of work. Nbd. 👍
Those square body Chevrolets were the first generation to have the Silverado trim level. 1975 was the first year for the Silverado trim level & it replaced the previous Cheyenne Super trim level.
TO MAKE IT DIFFICULT FOR THIEVES TO REMOVE THEM EASILY, I THINK I SHOULD COMPLETELY FILL IN THE ENTIRE THE EMBLEM. And a little cleaning before sticking them back on would help, If the repair is already being done, it costs nothing to get it right.
I seen silver on the tape from the emblem when you peeled it off. Must just been from the emblem already starting to peel off but still funny to see as youre saying that
My car dropped a letter from the back emblem, and I could see some "resin" remnants. I thought it was "old and dried up double sided tape". Now, I guess it was that glue you used. I bought the 3M double sided trim automotive tape. I placed the letter on top of the tape, trimmed the excess with a razor, and gently placed it back in place. And it worked. However, now one letter is slightly higher than the other one. The thing that I noticed was how the original glue seemed to "dissolve" the cars surface, and I was afraid to pry out the other one to make them even. I might do it. Later. Or if the car drops the taped letter, I will replace the whole thing. But I have faith in the double sided tape. I used to work in a warehouse and some of the trailers came with this "plates" glued on to the walls of the truck to tighten an tie up everything from falling via a "ribbon and crank tying system" that was held together by 3M double sided tape.
will that adhere if it has no pins? One of my emblems has no pins and the other just one pin. And will that work with metal emblems? I can't tell if you're emblem was plastic or some type of light metal
Racist or honest? Cuz you will blast out your ear drums. Besides, gun community likes guns and actually knows about them, not just glorifying them because criminals use em. Go ahead and let me know a singular genre of music that isn’t stereotypically black, GUARANTEE you none of em are talking bout doing drugs and killing their neighbors cuz they on the wrong side of the street. So yeah, y’all do crack me up. And no it’s not racist, it’s an honest point of view supported by fact.
Bro wtf are you even talking about? Like i know what you are talking about but I think you commented on the wrong video 😂 this is just a tutorial on how to put an emblem on a car
@@LxneStxner I honestly don’t know lmao. I have a lot of idiot gun people on my TH-cam shorts, so probably was supposed to be on one of those…no fuckn idea how the comment got here tho 😂 I’ve literally never searched anything close to this, not an automotive bone in my body lmao. Shits funny tho fr
After watching about 7 vids where the title said how to re badge your car just to find out that they all showed you how to do it with a brand new after market badge that had a perfect layer of adhesive on the back.. I was strictly interested on how you re install these damn things so finally I found why was looking for . Thank you sir 🙏🏻
THANK YOU THANK YOU. finally someone shows what type of Adhesive is used.
This will RUIN paint work
@@Trenscendent what will work better?
@@poppinfresh5261 automotive double sided tape. It's very strong and easily removed with fishing line. I've had my emblems on with double sided tape for years no issues.
@@Trenscendent I love how people think weatherstripping and gasket adhesive would work well to mount emblems that obviously were mounted with mounting tape. Then making the claim it can be used to remount emblems on fresh paint. Adhesive with solvents in it on fresh paint… smeared on haphazardly. I guess they’ll find out the adhesive doesn’t stay that flexible when it dries and an emblem will easily pop off a body panel taking some fresh paint with it. I try to cut mounting tape in a way which minimizes dirt getting behind the emblem.
Dont bother washing it or cleaning off the old tape from the badge. Wouldn't want it to stick or anything.
Thanks I appreciate this. The emblem S-10 came off the back of the pick up truck at the car wash. I was lucky enough to see something fly outside to the front on the entrance while I was spraying the truck with water. Got the part and that’s why I’m here, now I need to get what you used, thanks. 👍
For all asking: 3M Black Super Weatherstrip and Gasket Adhesive P/N: 08008
Thank you, wayfaring James.
I'm going to order now.
You made my day.👍👍
3M black super weatherstrip and gasket adhesive
Thank you sir!!! Best info on this yet! Thank you for explaining pegs too. Im new to fixing cars. Big thumbs up!
I use a fishing line to remove them! Great vid!!
Thanks for the recommendation. This looks like what I'm after. I was considering the 3M press in place transfer adhesive which looks like a nightmare to use. This product looks much better and I won't have to clean it up around the edges. Tip - use dental floss with a hair dryer. I wouldn't trust a spatula to not scratch the paint.
Interesting use dental floss, did you do this job successfully it’s an 8 month comment
@@froglobster I used 20lb fishing line yesterday to get my camaro shields off left and right sides. Line broke 2-3 times per shield so recommend 40 or 50lb line for stronger pull. I used spray bottle of Goof-Off afterwards to clear Remaining residue of glue off after peeling off what I could. Uses car wash towels to clean it up. About 15mins of work. Nbd. 👍
excellent. I bought some 3M two sided tape, but I also have some of the 3M adhesive. Thanks for the heads-up on which is better ! GREAT !
Those square body Chevrolets were the first generation to have the Silverado trim level. 1975 was the first year for the Silverado trim level & it replaced the previous Cheyenne Super trim level.
Thank you so much for the information. I was dumb and try to D badge my F150. Didn’t know it had holes in it.
Well done 👍🏻 I was looking for this exact video Ty very much
TO MAKE IT DIFFICULT FOR THIEVES TO REMOVE THEM EASILY, I THINK I SHOULD COMPLETELY FILL IN THE ENTIRE THE EMBLEM.
And a little cleaning before sticking them back on would help, If the repair is already being done, it costs nothing to get it right.
Excellent video. I like the 3M weatherstrip adhesive idea.
Thank you very much! I just ordered a new badge for my Ford Fusion. I will definitely be using this video as a guide!!
The part # of the 3M adhesive would be helpful to know. Otherwise, great vid!
I seen silver on the tape from the emblem when you peeled it off. Must just been from the emblem already starting to peel off but still funny to see as youre saying that
Best instruction on this topic out there.
Omg finally a good video!! I watched 4 before this one and omg what a waist of time. You got straight to the pint thank you so much
I wonder if E6000 would work, that stuff holds just about anything!
What about JB Weld plastic epoxy?
My car dropped a letter from the back emblem, and I could see some "resin" remnants. I thought it was "old and dried up double sided tape".
Now, I guess it was that glue you used.
I bought the 3M double sided trim automotive tape.
I placed the letter on top of the tape, trimmed the excess with a razor, and gently placed it back in place. And it worked.
However, now one letter is slightly higher than the other one.
The thing that I noticed was how the original glue seemed to "dissolve" the cars surface, and I was afraid to pry out the other one to make them even. I might do it. Later.
Or if the car drops the taped letter, I will replace the whole thing.
But I have faith in the double sided tape. I used to work in a warehouse and some of the trailers came with this "plates" glued on to the walls of the truck to tighten an tie up everything from falling via a "ribbon and crank tying system" that was held together by 3M double sided tape.
Very helpful, great content.
Thank you for the video. You've solved my problem!!!! Thanks again stay safe amigo.
Appreciate the vid only thing you should’ve done was put a link in the description for the glue but at least u told us what u used
Ron Swanson? Is that you?! Seriously though, thanks for the detailed video.
lol
So where can I buy that glue? Auto zone??
Great simple explanation!
Perfect Video for me , was working on my OBS aswell
"nice and flat" just like my wife
will that adhere if it has no pins? One of my emblems has no pins and the other just one pin. And will that work with metal emblems? I can't tell if you're emblem was plastic or some type of light metal
Does anyone know if this stuff works well in high heat? I live in the Middle East with temps that hover around 100-120 degrees Fahrenheit
How long after applying can I drive.
I'm not 100% but at 2:20 of the video it looks like some crome attached to the plastic came off and is stuck to the tape.
Very helpful!!! Thanks
Question, how to you remove that black silicone if it gets on the paint and you didn't notice?
goo gone
What year is your pick up? I have a 1977 Cheyenne 3/4 ton.
1988, they don’t build them like that anymore
Can I just use gasket maker?
straight the point awesome
is that okay re-instal emblem with 3M Nitril /1099 ?
very helpful!
👍
Thanks was very helpful
Does this adhesive harden up and last?
thank you sir!
This can work for front grill emblems too right ??
Thanks Live Free!
honda camry here I come
💯💪🏾
thank you!
Thanks
🙏🏽🙏🏽🙏🏽🙏🏽
Racist or honest? Cuz you will blast out your ear drums. Besides, gun community likes guns and actually knows about them, not just glorifying them because criminals use em. Go ahead and let me know a singular genre of music that isn’t stereotypically black, GUARANTEE you none of em are talking bout doing drugs and killing their neighbors cuz they on the wrong side of the street. So yeah, y’all do crack me up. And no it’s not racist, it’s an honest point of view supported by fact.
Bro wtf are you even talking about? Like i know what you are talking about but I think you commented on the wrong video 😂 this is just a tutorial on how to put an emblem on a car
@@LxneStxner I honestly don’t know lmao. I have a lot of idiot gun people on my TH-cam shorts, so probably was supposed to be on one of those…no fuckn idea how the comment got here tho 😂 I’ve literally never searched anything close to this, not an automotive bone in my body lmao. Shits funny tho fr
31,000 views. 400 likes. You guys are heathens
What's the mame of the adhesive?
Freeze video at 0:29
Just use glue gun simple
Very bad on paint