Mercedes Benz W204 C300 DIY ESL Emulator FIx
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- I saved over $2,500 fixing the broken Electronic Security Lock on my W204 2009 Mercedes Benz C300 and replaced it with an Emulator. I did this DIY job myself, but I did have to send the key and Ignition switch to a shop that programed an emulator to delete the ESL.
EIS removal tool and ESL Motor amzn.to/3VeAvhV
Center Punch Tool amzn.to/4afvXvG
Scan Tool used to determine ESL Failure amzn.to/4945Mr9
Disclaimer: This video is for entertainment purposes only and does not constitute professional advice. Use of this information is at your own risk. Further, the information contained herein should not be used as a substitute for advice of a qualified professional. We cannot guarantee against improper use or unauthorized modifications of this information. We assume no liability for property damage or injury incurred as a result of any of the information contained in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, safety practices or from the information contained in this video is the sole responsibility of the user and not FixAnythingDIY
Usterka blokady kierowniczej
Usterka blokady kerovnitskoy
Mercedes Benz C250 C350 GLK 350
This video contains affiliate links. If you click on one of them, I'll receive a commission.
For Collaborations and/or Business Inquiries Email: fixanythingdiy@gmail.com
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 10](http://i.ytimg.com/vi/8kldrPPsDZs/mqdefault.jpg)
Germans engineer good knives. That’s about it.
stay tuned to see what breaks next...
Nice work! Thanks for the shout out. I’m happy to help.
Thank you
Is this who you went through for programming the emulator? I would love to send mines where you sent yours missing my car😭
Could I senf you my emulator to be reprogrammed
Awesome video. Love the edit.
Thank you
Love it ❤
Thank you
Nice work!!! 🎉 Can you post a video on how you got the steering wheel out or did you even have to do that? I ordered one from Michael too and my man that fixes Mercedes-Benz is backed up, so it would be amazing if I could do it myself! Hit me up and let me know! Awesome job!
@exclsv12 I found this vid for removal
th-cam.com/video/oMWpbrxQPEk/w-d-xo.htmlsi=uLeScI7XfY-iMpxy
You don’t need to remove the steering column.
Just so you know UHS makes plug n play esl emulators where they don’t need replaced.
You can buy the emulator yourself online and it’s just plug and play. You’ll save $150-$200 bs buying it online.
Btw, use a local shop, tech, locksmith as they can support you after the fact.
The unlock noise you hear is a little speaker emulating the sound.
Keep in mind if you ever take the car to the Mercedes dealer for service and they find that stuff while doing diagnosis they will require you to replace said components so they can diagnose properly.
A goood mobile tech, shop, locksmith can even take a used esl and write the data from an old to a new one.
How do you get the ESL out when it failed in the locked position? If mine failed in the unlocked position I could have got it off the steering column, but mine failed in the locked position. @@dtnel
u throw out that big metal piece with old steering lock? remove it totally?
It is removed now. The emulator replaced it.
can I just replace the motor? without progamming?
I tried replacing the motor, but it didn't work. I noticed there were some very dark spots on the pc board inside the esl where the motor connected, so the pc board on mine was probably fried. It's worth a shot trying though. I had to get an emulator to delete the esl. Hope you get yours fixed. th-cam.com/video/PoZkqtFGKcQ/w-d-xo.html
so, if the pcb is good ,no need programming@@fixanythingdiy
Where did you put the emulator, after connecting it? Just let it hang or...?
I just zip tied it under the kick panel
Man I’m so lost. I have a 2010 c300. Left the doors open too long battery died. Swapped battery(ended up putting negative on first by accident) checked fuses, checked relays…everything is good. My battery just so happened to drop a cell and was due to die anyway(auto store checked it). Nothing was popping up for DTCs. I decided to start pulling relays and all off a sudden I get p0607(performance control module error)… when I place key in ignition it says “remove key from ignition.” Jumping the car won’t even work… is this really my answer bro?
Should I give this a go?
I'm just a DIYer. Perhaps get the car scanned with a Mercedes Scan tool to get more insight into what's going on. These cars are a **** to figure out and I was real close to sending mine to the junk yard.
Can you put the link up where you bought the emulator? I have the same issue with my 2011 c300. Imma give Michael a call lol
Before this fix what issues was the car having
@@tcal9230 Starting about two months before the esl completely failed, periodically I would put the key in and and it would not start. I would then take the key out and put in back in then it would start. This happened to occur more frequently before it completely failed. Before you take it all apart scan the car with a tool that can see the Mercedes codes. Taking the steering column out is a real pain. And if you can get that esl out while it is unlocked you won't have to put the whole column out.
how much did it cost to program the new emulator?
I paid $280 to get the emulator programed. I hope you get yours fixed.
Same problem got it fix for 800.
Glad you got it fixed.
@@fixanythingdiy mercedes wanted 2700
@@alexhenderson5153 I didn't want to pay that much at my local MBZ dealership. They told me about $2,500 but said it could run higher...
@fixanythingdiy I found the guy they call him the key master. He came to my house and fixed it in my driveway. Put in an emulator, and it's all good 🙏🏾❤️ took him 2 hours.
Does it work on s 2009 c63 AMG? My steering wheel is not stuck but car wont crank everytime I try.
Maybe It's possible that your ESL stuck in the unlocked position? The way I found out for sure was to use a scan tool that can read the Mercedes modules. See link in the description for the scanner I have. I didn't want to take the whole steering column out (which is a major pain in the ass) until I knew for sure with the scanner. I hope you get yours fixed.
How did u program the esl unit ?
I had to send the key and the ignition switch to a shop that programs the emulator to communicate with the car's system.
@@fixanythingdiy perfect thanks 👍
Does it need to be programmed ???
it will need programing to communicate with the Ignition switch