Yes most of these 11800h es I saw was able to get around 6400-6500 in cpu-z multi thread after some overclocking (similar to a desktop i9-11900), great value if you have a decent water cooler
It's very hot with overclock (both VRMs and Cpu), liquid metal is good for cooling but a bit risky though... I limit it below 65W and the maximum temperature is ~90C.
Suggesstions. Liquid metal between cpu and interposer. DO NOT GET IT ON THE ALUMINUM. LEAVE A SMALL BORDER BETWEEN THE COPPER AND ALUMINUM!!!! Make sure your cpu cooler is a solid base and not heat pipes. Heat pipes don't make "great" contact with the interposers copper slug. With those two suggestions you can start to crank up more power as needed to keep clocks steady. I highly suggest the upgraded erying vrm heatsinks as the stockers are pretty crap. In the overclocking section "uncore" is where your voltage is for mem controller. My memory is some B die flare X at gear 1 3500mhz with some some pretty tight timings. I get around 48 NS of latency via Aida64 so don't sleep on the uncore. It'll help get your mem stable. My board was able to be set at 104bclk for an easy extra 150 ish mhz. In total, I have in gaming 4 cores doing 4.95ghz while the other 4 do 4.85. My total power allowed is 145 watts which under stress test goes to about 140. My mem as stated is running at 3512 mhz. Mine is an i7 11900 ES. I'm running adaptive and have not given my board any extra + Vcore offset. Just as a quick measure, in cpu single core gets around 670 and multicore gets around 6800 - 6900. Good luck everyone. These things are a steal once tuned. Also, if anyone is interested there is an aliexpress store selling 5700XT's for around $125 us plus shipping. I think I paid $137 after tax. It appears to be a Biostar extreme gaming triple fan card rebranded to "Elsa"
Thanks! this helped a lot, havent built a machine in 8 years, and havent seen an AMI bios since the 90's so was a bit lost - this one had me going around in circles getting my kingston fury beasts to run at a descent speed, the 'golden nugget' moment was that bit in the bios that showed the 24x multiplier for 133 clock speed to get 3200 mt/s ! The only issues I have had so far are RDP drops out when remoting into it unless am running the high performance profile, and as i'm testing am using onboard gfx, the driver doesnt allow me to sort the overscan issue out on a tv - this wont be an issue when I drop a proper gfx card in, the other thing is I had an unrecoverable GPF while adjusting the power settings under windows to sort out the RDP drop outs as I suspected it was power management related that was causing the RDP problem, and the system ended up bricked but was ok after a fresh install, I havent had the need to touch the cpu settings on my 11900ES, and in the bios it idles at 13-15c but I am using a custom water loop to cool it... but switching to the high performance profile it boosts to 4.7 without any intervention so am leaving it at that.. btw the vrms get a bit toasty too so they will need descent cooling...
I've used RDP with it for a while and it's quite stable... I only did overclocking in the bios and left most of the settings in bios at default. Enabling Sleep in the bios can lead to some weird issue (some issue with power management), also if the voltage is too low it also have random issues like bsod, etc. I would recommend you leave most of the settings in the bios at default as I don't think it's fully functional. VRMs does get very hot when gaming and I added a small fan blowing directly to them to make sure they don't blow up😂
Did you figure out that the onboard graphics are actually 1st gen Iris Xe? If you lock down the driver and disable windows updates to it they work fine supposedly.
thanks for the video, it helped me alot. Do you know by chance if theres any way to control fan speeds?, I havent seen anyone talk about that with this board
WORked my 11600h am soo happy scoring 585 on cpuz beating a i9 9900k in single core performance (i was having stability issue at the settings you did it 47 so i did it 43 then it was all stable thank you ✅
And what is the minimum number of "watts" that could work, that is, the minimum energy consumption of that board. Would it be interesting to use it for a NAS, but would we have to see its consumption?
I have not been able to get Kingston Fury 2x16GB 32GB 3200MHz C16 kit to be stable above 2666MHz. Any ideas why? The latency and voltage is set to XMP1 values and I even tried to increase all latency values a bit to no avail. Crashes when stressed. With 2666MHz all stable, but anything over that crashes. No cpu overclocking (yet).
@@ringofeustel7009 I've done those and even tried to ease the latency setting. Not working, freezes with all Kingston (over 2666MHz memories). 3DMark crashes etc. With Samsung 2666MHz memories all fine. Do anyone know if the M.2_A Wifi slot works? I have not been able to get it working.
@@mikev2066 that was about the first things I tried. This is not stable even in 2666MHz. To be honest, this is cheap rubbish. But if you are ready to accept the instability, it is ok.
Thanks for the video have you tested OC with enabled AVX3 (AVX-512)? I want to use it as an emulation PC and for RPCS3 AVX-512 has significant performance gains I have coe i5 equivalent (6c/12th, base clock 1.8 GHZ) and have stability issues It also does not posts in gear mode 1, at least so far I have no luck It runs cinebench R23 fine (score is about 10000) but Aida 64 stops with Hardware fault detected, and Prime 95 stops some workers due to calculation errors. It also has BSOD during normal use, for example while installing the game from steam Temperatures are fine, maximum I observed is 82℃, I changed thermal paste between CPU and interposer and used same thermal paste (MX6) under the cooler (Be Quiet Shadow Rock LP) I also have 3200 MTS RAM(which is working in another system without an issue at XMP) , I selected XMP, but as I mentioned no gear ratio...
Yes with AVX3 is fine, I think the ram is cauing these stability issues. Maybe try couple of pairs and see which one works, I'm using 16G*2 C16 Corsair vengeance lpx 3200.
Is it possible to achieve here 5 GHz on all cores? Just asking :D Btw, how are the temperatures? I saw some guys suggesting to use a liquid metal, but I think a better option is to use carbonaut thermal pad from grizzly, between the cpu and cooper slug.
It is possible, 5ghz is maximum. However the voltage will be very high i found that 4.4ghz has the best performance/voltage 4.5 need 47mV more. And for obvious reason u cannot use adaptive voltage, u need override and add like 150mV for 5Ghz so if u dont have big radiator and liquid metal just stay at 4.6
@@АлексейКлочков-щ8у в общем все просто, множетели подбирай опираясь теста синебенч 23, а повер лимиты ставь на 115 кратковременную, а обычный на 130 ват. У меня вышло стабильно на 47 46 46 46 45 45 45, под крышкой жидкий метал, температура дросилей не больше 76 градусов.
Bought one, the bios is abit overwelming... not for default users for easier overclocking might I suggest a software program "quick CPU" very easy and works too. I am having some memory problems, perhaps some1 here could help me out ? I bought 2 dimm's both 3200mhz and 16gb. one of them works and the other won't go upto 3200, but instead does max 2666mhz, is it possable to force it to go 3200 ?
@@beyondz6408 yes that is correct. I bought corsair vengeance ddr4 3200 2x16gb. Doesn't work (it works at 2100 or something like it) I would recommend buying it with the board. The stick i bougth with the board does work. BUT! The 2nd stick i bought from ali express didn't work. It is "Erying" ram. But the software info says it is both from a difrent brand. ( This means to me it is either the chips on the board OR it is just reused/2nd hand memory)
Короче эта карта это то еще г@вно, через 7 месяце отвал внешней видеокарты, китаец сказал что это не его проблемы. Не тратьте деньги, купите нормальную вещь.
Thanks! I cant believe how much performance i squeezed out of this es i7 from your instruction. great video
Yes most of these 11800h es I saw was able to get around 6400-6500 in cpu-z multi thread after some overclocking (similar to a desktop i9-11900), great value if you have a decent water cooler
does it overheat too much with Overclock? I saw some videos it needs liquit medal below the IHS
It's very hot with overclock (both VRMs and Cpu), liquid metal is good for cooling but a bit risky though... I limit it below 65W and the maximum temperature is ~90C.
@@beyondz6408what desktop processor would erying i9 motherboard function like
Suggesstions. Liquid metal between cpu and interposer. DO NOT GET IT ON THE ALUMINUM. LEAVE A SMALL BORDER BETWEEN THE COPPER AND ALUMINUM!!!! Make sure your cpu cooler is a solid base and not heat pipes. Heat pipes don't make "great" contact with the interposers copper slug. With those two suggestions you can start to crank up more power as needed to keep clocks steady. I highly suggest the upgraded erying vrm heatsinks as the stockers are pretty crap. In the overclocking section "uncore" is where your voltage is for mem controller. My memory is some B die flare X at gear 1 3500mhz with some some pretty tight timings. I get around 48 NS of latency via Aida64 so don't sleep on the uncore. It'll help get your mem stable. My board was able to be set at 104bclk for an easy extra 150 ish mhz. In total, I have in gaming 4 cores doing 4.95ghz while the other 4 do 4.85. My total power allowed is 145 watts which under stress test goes to about 140. My mem as stated is running at 3512 mhz. Mine is an i7 11900 ES. I'm running adaptive and have not given my board any extra + Vcore offset. Just as a quick measure, in cpu single core gets around 670 and multicore gets around 6800 - 6900. Good luck everyone. These things are a steal once tuned. Also, if anyone is interested there is an aliexpress store selling 5700XT's for around $125 us plus shipping. I think I paid $137 after tax. It appears to be a Biostar extreme gaming triple fan card rebranded to "Elsa"
thank you so much! I finally got mine booted up today. Now I can start the overclocking!
Thanks! this helped a lot, havent built a machine in 8 years, and havent seen an AMI bios since the 90's so was a bit lost - this one had me going around in circles getting my kingston fury beasts to run at a descent speed, the 'golden nugget' moment was that bit in the bios that showed the 24x multiplier for 133 clock speed to get 3200 mt/s !
The only issues I have had so far are RDP drops out when remoting into it unless am running the high performance profile, and as i'm testing am using onboard gfx, the driver doesnt allow me to sort the overscan issue out on a tv - this wont be an issue when I drop a proper gfx card in, the other thing is I had an unrecoverable GPF while adjusting the power settings under windows to sort out the RDP drop outs as I suspected it was power management related that was causing the RDP problem, and the system ended up bricked but was ok after a fresh install, I havent had the need to touch the cpu settings on my 11900ES, and in the bios it idles at 13-15c but I am using a custom water loop to cool it... but switching to the high performance profile it boosts to 4.7 without any intervention so am leaving it at that.. btw the vrms get a bit toasty too so they will need descent cooling...
I've used RDP with it for a while and it's quite stable... I only did overclocking in the bios and left most of the settings in bios at default. Enabling Sleep in the bios can lead to some weird issue (some issue with power management), also if the voltage is too low it also have random issues like bsod, etc. I would recommend you leave most of the settings in the bios at default as I don't think it's fully functional. VRMs does get very hot when gaming and I added a small fan blowing directly to them to make sure they don't blow up😂
Did you figure out that the onboard graphics are actually 1st gen Iris Xe? If you lock down the driver and disable windows updates to it they work fine supposedly.
I have japanese h61 huananzhi plus is it overclockable?
I dont have all the menus in the bios
thanks for the video, it helped me alot. Do you know by chance if theres any way to control fan speeds?, I havent seen anyone talk about that with this board
Yes you can control the fans in the bios. I think it's under hardware monitor and you need to manually set the pwm values (0-255) and slope.
WORked my 11600h am soo happy scoring 585 on cpuz beating a i9 9900k in single core performance (i was having stability issue at the settings you did it 47 so i did it 43 then it was all stable thank you ✅
buenas, has hecho justo lo mismo del video y solo cambiaste ese valor de 47 por 43?
Hi. Can this motherboard support Arc A770 GPU?Asking cos noted the bios can enabled resizable bar.
And what is the minimum number of "watts" that could work, that is, the minimum energy consumption of that board. Would it be interesting to use it for a NAS, but would we have to see its consumption?
can you overclock iris xe graphics, I want to gaming on it. if yes I think I can overclock iris with 12900hk
Hello, do you know how to configure this machine to restart in case of power loss?
Thanks! Big help
I have not been able to get Kingston Fury 2x16GB 32GB 3200MHz C16 kit to be stable above 2666MHz. Any ideas why? The latency and voltage is set to XMP1 values and I even tried to increase all latency values a bit to no avail. Crashes when stressed. With 2666MHz all stable, but anything over that crashes. No cpu overclocking (yet).
set to manual and don´t forget to set in this menu the voltage also to 1,35V. (133x24,16,20,36)
@@ringofeustel7009 I've done those and even tried to ease the latency setting. Not working, freezes with all Kingston (over 2666MHz memories). 3DMark crashes etc.
With Samsung 2666MHz memories all fine.
Do anyone know if the M.2_A Wifi slot works? I have not been able to get it working.
@Corzito Mdz unfortunately yes. The highest stable has been 2666MHz with Samsung memories. And even that is not totally stable.
@@jarnovilen5259 try in this way: memory reference - 100, memory multiplier - 32.
@@mikev2066 that was about the first things I tried. This is not stable even in 2666MHz. To be honest, this is cheap rubbish. But if you are ready to accept the instability, it is ok.
Thanks for the video
have you tested OC with enabled AVX3 (AVX-512)? I want to use it as an emulation PC and for RPCS3 AVX-512 has significant performance gains
I have coe i5 equivalent (6c/12th, base clock 1.8 GHZ) and have stability issues
It also does not posts in gear mode 1, at least so far I have no luck
It runs cinebench R23 fine (score is about 10000) but Aida 64 stops with Hardware fault detected, and Prime 95 stops some workers due to calculation errors.
It also has BSOD during normal use, for example while installing the game from steam
Temperatures are fine, maximum I observed is 82℃, I changed thermal paste between CPU and interposer and used same thermal paste (MX6) under the cooler (Be Quiet Shadow Rock LP)
I also have 3200 MTS RAM(which is working in another system without an issue at XMP) , I selected XMP, but as I mentioned no gear ratio...
Yes with AVX3 is fine, I think the ram is cauing these stability issues. Maybe try couple of pairs and see which one works, I'm using 16G*2 C16 Corsair vengeance lpx 3200.
Do it reach 5GHz on 12980HK?
Is it possible to achieve here 5 GHz on all cores? Just asking :D Btw, how are the temperatures? I saw some guys suggesting to use a liquid metal, but I think a better option is to use carbonaut thermal pad from grizzly, between the cpu and cooper slug.
It is possible, 5ghz is maximum. However the voltage will be very high i found that 4.4ghz has the best performance/voltage 4.5 need 47mV more. And for obvious reason u cannot use adaptive voltage, u need override and add like 150mV for 5Ghz so if u dont have big radiator and liquid metal just stay at 4.6
para el modelo 11600H serian los mismos pasos??? tengo muy buenas temperaturas en mi cpu y creo que podria subir un poco la frecuencia, un saludo
Did it work for you? Were you able to overclock?
Does this motherboard support Resizable Bar
Yes
Чел, спасибо тебе большое. Благодаря тебе сделал разгон все стабильно работает, ты лучший!🎉🎉🎉
как ты понял о чем он лалакает? ТОже хотел стабильно настроить, а то при всех остальных настройках тротлит
@@АлексейКлочков-щ8у в общем все просто, множетели подбирай опираясь теста синебенч 23, а повер лимиты ставь на 115 кратковременную, а обычный на 130 ват. У меня вышло стабильно на 47 46 46 46 45 45 45, под крышкой жидкий метал, температура дросилей не больше 76 градусов.
Bought one, the bios is abit overwelming... not for default users
for easier overclocking might I suggest a software program "quick CPU" very easy and works too.
I am having some memory problems, perhaps some1 here could help me out ?
I bought 2 dimm's both 3200mhz and 16gb. one of them works and the other won't go upto 3200, but instead does max 2666mhz, is it possable to force it to go 3200 ?
I think it depends on ram, I saw the board does has some compatiibility issue with certain rams.
@@beyondz6408 yes that is correct.
I bought corsair vengeance ddr4 3200 2x16gb. Doesn't work (it works at 2100 or something like it)
I would recommend buying it with the board. The stick i bougth with the board does work. BUT! The 2nd stick i bought from ali express didn't work. It is "Erying" ram. But the software info says it is both from a difrent brand. ( This means to me it is either the chips on the board OR it is just reused/2nd hand memory)
Wait I have the exact same ram (LPX 3200 16G*2 C16) and this pair have samsumg M-die. Yep some cheap ram take server rams and reuse the dram chips...
@@beyondz6408 yup, same ram. Cheap ram... I really wanted the 3200... But I have settled on 2666mt/s
@@beyondz6408 did it work on your system at all ?
AlDA64 Cache Memory Benchmark х
Read Write Сору (З) Latency
Memory 66746 мвв 62665 мвк 59240 мвк 67.9 ns
[1 Cache 2422.5 GB/s 2440.3 GB/s 3240.9 GB/s 1.0 ns
[2 Cache 1220.4 GB/s 712.77 GB/s 1039.8 GB/s 3.7 ns
[3 Cache 30.04 GB/s 257.70 GB/s 292.74 GB/s 17.0 ns
CPU туре OctalCore (Tiger [аКе-Н, FCBGA1787)
CPU Stepping
CPU Clock 4987.8 MHz (original: 2600 MHz, overclock: 91%)
CPU FSB 99.8 MHz (original: 100 MHz)
CPU Multiplier 50х North Bridge Clock 3691.0 MHz
Memory Bus 2128.1 Ml-lz DRAM•.FSB Ratio 64:3
Memory Туре Dual Channel DDR4-4266 SDRAM (21-18-18-40 CR1)
Chipset Intel Tiger Point НМ570, Intel Tiger Lake-H
Motherboard FLASH i7-11800H PLUS
BlOS Version 5.19
AlDA64 v7.30.6900 / BenchDLL 4.6.896.8-х64 (с) 1995-2024 FinalWire Ltd.
Save Start Benchmark Close
Короче эта карта это то еще г@вно, через 7 месяце отвал внешней видеокарты, китаец сказал что это не его проблемы. Не тратьте деньги, купите нормальную вещь.